8503.00: Delen waarvan kan worden onderkend dat zij uitsluitend of hoofdzakelijk bestemd zijn voor de machines bedoeld bij post 8501 of 8502

Invoerrechten vergeleken

EU 2,7% Derdelandenrecht 4 tariefregels Turkije 50% – 100% Wettelijk tarief (Wet 474) 12 tariefregels · gemiddeld 58,3% VS Vrij – 6,5% Algemeen (General) 7 tariefregels · gemiddeld 3,1% VK 2% Derdelandenrecht 22 tariefregels

Het Turkse douanetarief vermeldt het wettelijke tarief volgens douanetariefwet nr. 474. Het tarief dat bij invoer wordt toegepast, staat in het Besluit invoerregime en kan lager zijn of per land van oorsprong verschillen.

1. 8503 00 Delen waarvan kan worden onderkend dat zij uitsluitend of hoofdzakelijk bestemd zijn voor de machines bedoeld bij post 8501 of 8502:
2. 8503 00 10 niet-magnetische ringen 2,7%—
3. 8503 00 20 lamellen van staal, en rotorkernen, ook indien gestapeld 2,7%—
4. andere:
5. 8503 00 91 van gietijzer of van gegoten staal 2,7%—
6. 8503 00 98 andere 2,7%—

Voor deze regel bestaat geen officiële Nederlandse tekst; hij wordt getoond in de taal van het eigen tarief.

1. 8503.00.10.00.00 Manyetik olmayan tesbit bileziği 50%
2. 8503.00.20.00.00 Çelik laminasyonlar ve stator ve rotor çekirdekleri, istiflenmiş olsun veya olmasın 50%
3. 8503.00.91.10.00 Oyuncaklar için minyatür motor aksam ve parçaları 100%
4. 8503.00.91.90.11 Stator ve rotor paketleri 50%
5. 8503.00.91.90.12 Kollektörler 50%
6. 8503.00.91.90.13 Kare ve dikdörtgenden başka şekilde kesilmiş manyetik saclar 50%
7. 8503.00.91.90.19 Diğerleri 50%
8. 8503.00.98.10.00 Oyuncaklar için minyatür motor aksam ve parçaları 100%
9. 8503.00.98.90.11 Stator ve rotor paketleri 50%
10. 8503.00.98.90.12 Kollektörler 50%
11. 8503.00.98.90.13 Kare ve dikdörtgenden başka şekilde kesilmiş manyetik saclar 50%
12. 8503.00.98.90.19 Diğerleri 50%

Voor deze regel bestaat geen officiële Nederlandse tekst; hij wordt getoond in de taal van het eigen tarief.

1. 8503.00 Parts suitable for use solely or principally with the machines of heading 8501 or 8502:
2. 8503.00.20.00 Commutators 2,4%No.
3. 8503.00.35.00 For motors of under 18.65 W 6,5%No.
4. 8503.00.45.00 For generators suitable for use on aircraft VrijNo.
5. 8503.00.65.00 Other 3%No.
6. 8503.00.75.00 For motors of under 18.65 W 6,5%No.
7. 8503.00.90.00 For generators suitable for use on aircraft VrijNo.
8. 8503.00.95 Other 3%
9. 8503.00.95.20 Parts of motors kg
10. 8503.00.95.46 For AC generators (alternators) classified in statistical reporting number 8501.64.0110 kg
11. 8503.00.95.50 Other kg
12. 8503.00.95.70 Parts of wind-powered generating sets classified in subheading 8502.31.00 kg
13. 8503.00.95.80 Other kg

Special: verlaagde tarieven onder handelsakkoorden en preferentieprogramma’s; de letters tussen haakjes geven de programma’s aan (bijvoorbeeld AU = vrijhandelsakkoord met Australië, KR = vrijhandelsakkoord met Korea).

Voor deze regel bestaat geen officiële Nederlandse tekst; hij wordt getoond in de taal van het eigen tarief.

1. 8503 00 10 00 Non-magnetic retaining rings 2%
2. 8503 00 10 10 For use in certain types of aircraft 2%
3. 8503 00 10 90 Other 2%
4. 8503 00 20 00 Steel laminations and stator and rotor cores, whether or not stacked 2%
5. 8503 00 20 10 For use in certain types of aircraft 2%
6. 8503 00 20 20 Plated steel core of the electric motor rotor of electric air conditioning compressors for motor vehicles: <br>-with an outer diameter of 65 mm or more but not more than 80 mm, <br>-with an inner diameter of 15 mm or more but not more than 25 mm, <br>-with a height of 30 mm or more but not more than 45 mm, <br>-with a weight of 0.5 kg or more but not more than 0.8 kg,<br>-without windings<br> 2%
7. 8503 00 20 30 Plated steel core of the electric motor stator of electric air conditioning compressors for motor vehicles: <br>-with an outer diameter of 90 mm or more but not more than 120 mm,<br>-with an inner diameter of 65 mm or more but not more than 80 mm, <br>-with a height of 30 mm or more but not more than 45 mm, <br>-with a weight of 0.7 kg or more but not more than 1.2 kg,<br>-without windings<br> 2%
8. 8503 00 20 90 Other 2%
9. 8503 00 91 00 Of cast iron or cast steel 2%
10. 8503 00 91 10 For use in certain types of aircraft 2%
11. 8503 00 91 31 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing 2%
12. 8503 00 91 99 Other 2%
13. 8503 00 98 00 Other 2%
14. 8503 00 98 10 For use in certain types of aircraft 2%
15. 8503 00 98 32 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing 2%
16. 8503 00 98 33 Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm 2%
17. 8503 00 98 37 Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements: <br>- diameter of the rotor body of 15mm or more but not more than 37mm,<br>- length of the rotor body of 12mm or more but not more than 36mm<br> 2%
18. 8503 00 98 40 Pressure casted inner housing of a cooling channel system for an electrical motor:<br>-of en ac-47100 aluminum,<br>-shot-blasted and machined,<br>-leakproof to the degree of 3 ml per minute or less under 2.75 bar pressure,<br>-with a hardness of 70 or more on the hardness brinell wolfram (hbw) scale (2.5/62.5, according to iso 6506),<br>-with a tensile strength of 190 n/mm² or more,<br>-with a height of 160 mm or more, but not more than 330 mm,<br>-with a diameter of 240 mm or more, but not more than 368 mm,<br>-with a weight of 3 kg or more, but not more than 5.84 kg<br> 2%
19. 8503 00 98 43 Silicone or plastic keyboards, comprising:<br>-parts of common metal, and<br>-whether or not comprising parts of plastic,<br>-epoxy resin reinforced with fiberglass or wood,<br>-whether or not printed or surface-treated,<br>-with or without electrical conductors,<br>-with or without a membrane bonded to the keyboard,<br>-with or without mono or multilayer protective film<br> 2%
20. 8503 00 98 45 Armature for the electric motor in starter motors of passenger cars and commercial vehicles with:<br>-an outer diameter of 52 mm or more but not more than 80 mm,<br>-a commutator copper wire diameter of 2 mm or more but not more than 4 mm<br> 2%
21. 8503 00 98 53 Pressure casted rotor cover of the cooling channel system in the electrical motor:<br>- of en ac-47100-f aluminum,<br>- with a sealing cap of stainless steel,<br>- shot-blasted and machined,<br>- leakproof to the degree of 1ml per minute or less under 2.75 bar pressure,<br>- with a hardness of 70 hbw or more (2.5/62.5, according to iso 6506), <br>- with a tensile strength of 190 n/mm² or more,<br>- with a height of 42mm or more, but not more than 64mm,<br>- with a diameter of 88mm or more, but not more than 132mm,<br>- with a weight of 0.3kg or more, but not more than 0.5kg<br> 2%
22. 8503 00 98 55 Stator for brushless motor, with:<br>-an internal diameter of 206.6 mm (± 0.5)<br>-an external diameter of 265.0 mm (± 0.2) and<br>-a width of 37.2 mm or more but not more than 47.8 mm<br>of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums 2%
23. 8503 00 98 63 Pressure casted outer housing of an electrical motor: <br>- of en ac-47100 aluminum,<br>- with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,<br>- shot-blasted and machined,<br>- with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2.75 bar pressure,<br>- with a hardness of 70 or more on the hardness brinell wolfram (hbw) scale (2.5/62.5, according to iso 6506),<br>- with a tensile strength of 190 n/mm² or more,<br>- with a height of 195mm or more, but not more than 430mm,<br>- with a width of 290mm or more, but not more than 625mm,<br>- with a length of 270mm or more, but not more than 535mm,<br>- with a weight of 5.2kg or more, but not more than 12.5kg<br> 2%
24. 8503 00 98 73 Pressure die-cast electric motor stator housing:<br>-of en ac-46000 aluminium,<br>-shot-blasted and machined,<br>-with a height of 70 mm or more but not more than 76 mm,<br>-with a width of 155 mm or more but not more than 162 mm,<br>-with a weight of 330 g or more but not more than 360 g<br> 2%
25. 8503 00 98 75 Stator body of stacked electrical sheet having:<br>-an inner diameter of 18 mm or more, but not more than 35 mm,<br>-an outer diameter of 35 mm or more, but not more than 65 mm, and<br>-a length of 20 mm or more, but not more than 65 mm<br>-whether or not incorporated in a housing 2%
26. 8503 00 98 99 Other 2%

Wereldhandel in 2024

Grootste exporteurs

Plaats	Land	Waarde	Aandeel
1	China	US$ 6,7 mld.	26,6%
2	Duitsland	US$ 2,9 mld.	11,5%
3	Japan	US$ 1,7 mld.	6,8%
4	Verenigde Staten	US$ 1,5 mld.	6%
5	India	US$ 1,1 mld.	4,5%
6	Italië	US$ 1 mld.	4,2%
7	Mexico	US$ 817,8 mln.	3,3%
8	Frankrijk	US$ 742,6 mln.	3%
9	Tsjechië	US$ 560,3 mln.	2,2%
10	Denemarken	US$ 535,1 mln.	2,1%

Grootste importeurs

Plaats	Land	Waarde	Aandeel
1	Verenigde Staten	US$ 4 mld.	15,9%
2	Duitsland	US$ 3,6 mld.	14,6%
3	Frankrijk	US$ 1,3 mld.	5,2%
4	Mexico	US$ 1,1 mld.	4,4%
5	Italië	US$ 791,5 mln.	3,2%
6	Vietnam	US$ 790,4 mln.	3,2%
7	China	US$ 735 mln.	2,9%
8	Japan	US$ 711,9 mln.	2,8%
9	India	US$ 689,5 mln.	2,8%
10	Polen	US$ 655,4 mln.	2,6%

Vragen en antwoorden