Pohjois-Makedonian tullitariffi
Pohjois-Makedonian tullitariffi, ryhmä 72: Rauta ja teräs
- 344Tullinimikkeet
- 0 %–10 %Tulli
Pohjois-Makedonian tullitariffissa ryhmässä 72 on 344 tullinimikettä 29 nimikkeen alla.
Tullit ovat 0 %–10 %, keskimäärin 0,4 %; tullittomia nimikkeitä on 303.
Pisimmälle on jaettu nimike 7228, muut tangot, muuta seosterästä, jossa on 25 tullinimikettä.
Yleisin tulli on 0 %; se on 303 nimikkeellä.
Korkein tulli, 10 %, on nimikkeellä 7216 91 10 00 (cold-formed or cold-finished from flat-rolled products).
7201 Harkkorauta ja peilirauta, harkkoina, möhkäleinä tai muussa alkumuodossa
- 7201 10 11 00Containing by weight 1 % or less of silicon
- 7201 10 19 00Containing by weight more than 1 % of silicon
- 7201 10 30 00Containing by weight not less than 0,1 % but less than 0,4 % of manganese
- 7201 10 90 00Containing by weight less than 0,1 % of manganese
- 7201 20 00 00Non-alloy pig iron containing by weight more than 0,5 % of phosphorus
- 7201 50 10 00Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium
- 7201 50 90 00Alloy pig iron; spiegeleisen: other
7202 Ferroseokset
- 7202 11 20 00With a granulometry not exceeding 5 mm and a manganese content by weight exceed- ing 65 %
- 7202 11 80 00Containing by weight more than 2 % of carbon: other
- 7202 19 00 00Ferro-alloys, other
- 7202 21 00 00Containing by weight more than 55 % of silicon
- 7202 29 10 00Containing by weight 4 % or more but not more than 10 % of magnesium
- 7202 29 90 00Ferro-alloys, other
- 7202 30 00 00Ferro-alloys, ferro-silico-manganese
- 7202 41 10 00Containing by weight more than 4 % but not more than 6 % of carbon
- 7202 41 90 00Containing by weight more than 6 % of carbon
- 7202 49 10 00Containing by weight not more than 0,05 % of carbon
- 7202 49 50 00Containing by weight more than 0,05 % but not more than 0,5 % of carbon
- 7202 49 90 00Containing by weight more than 0,5 % but not more than 4 % of carbon
- 7202 50 00 00Ferro-alloys, ferro-silico-chromium
- 7202 60 00 00Ferro-alloys, ferro-nickel
- 7202 70 00 00Ferro-alloys, ferro-molybdenum
- 7202 80 00 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten
- 7202 91 00 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-titanium and ferro-silico-titanium
- 7202 92 00 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-vanadium
- 7202 93 00 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-niobium
- 7202 99 10 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other, ferro-phosphorus
- 7202 99 30 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other, ferro-silico-magnesium
- 7202 99 80 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other
7203 Rautamalmista suoraan pelkistämällä saadut rautapohjaiset tuotteet sekä muut huokoiset rautapohjaiset tuotteet, säännöttöminä kappaleina, pelletteinä tai niiden kaltaisessa muodossa; rauta, jonka puhtaus on vähintään 99,94 painoprosenttia, säännöttöminä kappaleina, pelletteinä tai niiden kaltaisessa muodossa
7204 Rautapohjaiset jätteet ja romu; romusta sulatetut harkot, rautaa tai terästä
- 7204 10 00 00Waste and scrap of cast iron
- 7204 21 10 00Containing by weight 8 % or more of nickel
- 7204 21 90 00Waste and scrap of cast iron: of stainless steel, other
- 7204 29 00 00Waste and scrap of cast iron: other
- 7204 30 00 00Waste and scrap of tinned iron or steel
- 7204 41 10 00Turnings, shavings, chips, milling waste, sawdust and filings
- 7204 41 91 00Turnings, shavings, chips, milling waste, sawdust: in bundles
- 7204 41 99 00Turnings, shavings, chips, milling waste, sawdust: other
- 7204 49 10 00Waste and scrap of tinned iron or steel: other, fragmentised (shredded)
- 7204 49 30 00Waste and scrap of tinned iron or steel: other, fragmentised (shredded), in bundles
- 7204 49 90 00Waste and scrap of tinned iron or steel: other, fragmentised (shredded), other
- 7204 50 00 00Ferrous waste and scrap: remelting scrap ingots
7205 Rakeet ja jauheet, harkkorautaa, peilirautaa, rautaa tai terästä
7206 Rauta ja seostamaton teräs, valanteina tai muussa alkumuodossa (ei kuitenkaan nimikkeen 7203 rauta)
7207 Välituotteet, rautaa tai seostamatonta terästä
- 7207 11 11 00Of rectangular: of free-cutting steel
- 7207 11 14 00Of a thickness not exceeding 130 mm
- 7207 11 16 00Of a thickness exceeding 130 mm
- 7207 11 90 00Of rectangular: forged
- 7207 12 10 00Rolled or obtained by continuous casting
- 7207 12 90 00Other, of rectangular (other than square) cross-section: forged
- 7207 19 12 00Rolled or obtained by continuous casting
- 7207 19 19 00Semi-finished products of iron or non-alloy steel: other, forged
- 7207 19 80 00Semi-finished products of iron or non-alloy steel: other
- 7207 20 11 00Containing by weight 0,25 % or more of carbon: of free-cutting steel
- 7207 20 15 000,25 % or more but less than 0,6 % of carbon
- 7207 20 17 000,6 % or more of carbon
- 7207 20 19 00Containing by weight 0,25 % or more of carbon: forged
- 7207 20 32 00Rolled or obtained by continuous casting
- 7207 20 39 00Containing by weight 0,25 % or more of carbon: forged
- 7207 20 52 00Rolled or obtained by continuous casting
- 7207 20 59 00Containing by weight 0,25 % or more of carbon: forged
- 7207 20 80 00Containing by weight 0,25 % or more of carbon: other
7208 Levyvalmisteet, rautaa tai seostamatonta terästä, leveys vähintään 600 mm, kuumavalssatut, pleteroimattomat ja muulla tavalla metallilla tai muulla aineella pinnoittamattomat
- 7208 10 00 00In coils, not further worked than hot-rolled, with patterns in relief
- 7208 25 00 00Of a thickness of 4,75 mm or more
- 7208 26 00 00Of a thickness of 3 mm or more but less than 4,75 mm
- 7208 27 00 00Of a thickness of less than 3 mm
- 7208 36 00 00Of a thickness exceeding 10 mm
- 7208 37 00 00Of a thickness of 4,75 mm or more but not exceeding 10 mm
- 7208 38 00 00Of a thickness of 3 mm or more but less than 4,75 mm
- 7208 39 00 00Of a thickness of less than 3 mm
- 7208 40 00 00Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208 51 20 00Of a thickness exceeding 15 mm
- 7208 51 91 002 050 mm or more
- 7208 51 98 00Less than 2 050 mm
- 7208 52 10 00Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
- 7208 52 91 002 050 mm or more
- 7208 52 99 00Less than 2 050 mm
- 7208 53 10 00Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more
- 7208 53 90 00Of a thickness of 3 mm or more but less than 4,75 mm: other
- 7208 54 00 00Of a thickness of less than 3 mm
- 7208 90 20 00Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7208 90 80 00Flat-rolled products of iron or non-alloy steel, of a width: other
7209 Levyvalmisteet, rautaa tai seostamatonta terästä, leveys vähintään 600 mm, kylmävalssatut, pleteroimattomat ja muulla tavalla metallilla tai muulla aineella pinnoittamattomat
- 7209 15 00 00Of a thickness of 3 mm or more
- 7209 16 10 00Of a thickness exceeding 1 mm but less than 3 mm: 'Electrical'
- 7209 16 90 00Of a thickness exceeding 1 mm but less than 3 mm: other
- 7209 17 10 00Of a thickness of 0,5 mm or more but not exceeding 1 mm: 'Electrical'
- 7209 17 90 00Of a thickness of 0,5 mm or more but not exceeding 1 mm: other
- 7209 18 10 00Of a thickness of less than 0,5 mm: 'Electrical'
- 7209 18 91 00Of a thickness of 0,35 mm or more but less than 0,5 mm
- 7209 18 99 00Of a thickness of less than 0,35 mm
- 7209 25 00 00Of a thickness of 3 mm or more
- 7209 26 10 00Of a thickness exceeding 1 mm but less than 3 mm: 'Electrical'
- 7209 26 90 00Of a thickness exceeding 1 mm but less than 3 mm: other
- 7209 27 10 00Of a thickness of 0,5 mm or more but not exceeding 1 mm: 'Electrical'
- 7209 27 90 00Of a thickness of 0,5 mm or more but not exceeding 1 mm: other
- 7209 28 10 00Of a thickness of less than 0,5 mm: 'Electrical'
- 7209 28 90 00Of a thickness of less than 0,5 mm: other
- 7209 90 20 00Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7209 90 80 00Flat-rolled products of iron or non-alloy steel, of a width: other
7210 Levyvalmisteet, rautaa tai seostamatonta terästä, leveys vähintään 600 mm, pleteroidut tai muulla tavalla metallilla tai muulla aineella pinnoitetut
- 7210 11 00 00Of a thickness of 0,5 mm or more
- 7210 12 20 00Of a thickness of less than 0,5 mm: tinplate
- 7210 12 80 00Of a thickness of less than 0,5 mm: other
- 7210 20 00 00Plated or coated with lead, including terne-plate
- 7210 30 00 00Electrolytically plated or coated with zinc
- 7210 41 00 00Electrolytically plated or coated with zinc: corrugated
- 7210 49 00 00Electrolytically plated or coated with zinc: other
- 7210 50 00 00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210 61 00 00Plated or coated with aluminium-zinc alloys
- 7210 69 00 00Plated or coated with chromium oxides or with chromium: other
- 7210 70 10 00Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
- 7210 70 80 00Painted, varnished or coated with plastics: other
- 7210 90 30 00Flat-rolled products of iron or non-alloy steel, of a width: other, clad
- 7210 90 40 00Flat-rolled products of iron or non-alloy steel, of a width: other, tinned and printed
- 7210 90 80 00Flat-rolled products of iron or non-alloy steel, of a width: other
7211 Levyvalmisteet, rautaa tai seostamatonta terästä, leveys pienempi kuin 600 mm, pleteroimattomat ja muulla tavalla metallilla tai muulla aineella pinnoittamattomat
- 7211 13 00 00Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- 7211 14 00 00Other, of a thickness of 4,75 mm or more
- 7211 19 00 00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211 23 20 00Containing by weight less than 0,25 % of carbon: 'Electrical'
- 7211 23 30 00Of a thickness of 0,35 mm or more
- 7211 23 80 00Of a thickness of less than 0,35 mm
- 7211 29 00 00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211 90 20 00Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7211 90 80 00Flat-rolled products of iron or non-alloy steel, of a width: other
7212 Levyvalmisteet, rautaa tai seostamatonta terästä, leveys pienempi kuin 600 mm, pleteroidut tai muulla tavalla metallilla tai muulla aineella pinnoitetut
- 7212 10 10 00Tinplate, not further worked than surface-treated
- 7212 10 90 00Plated or coated with tin: other
- 7212 20 00 00Electrolytically plated or coated with zinc
- 7212 30 00 00Otherwise plated or coated with zinc
- 7212 40 20 00Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
- 7212 40 80 00Painted, varnished or coated with plastics: other
- 7212 50 20 00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7212 50 30 00Plated or coated with chromium or nickel
- 7212 50 40 00Plated or coated with copper
- 7212 50 61 00Plated or coated with aluminium-zinc alloys
- 7212 50 69 00Plated or coated with copper: other
- 7212 50 90 00Otherwise plated or coated: other
- 7212 60 00 00Flat-rolled products of iron or non-alloy steel, of a width: clad
7213 Tangot, kuumavalssatut, säännöttömästi kiepitetyt, rautaa tai seostamatonta terästä
- 7213 10 00 00Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7213 20 00 00Other, of free-cutting steel
- 7213 91 10 00Of a type used for concrete reinforcement
- 7213 91 20 00Of a type used for tyre cord
- 7213 91 41 00Containing by weight 0,06 % or less of carbon
- 7213 91 49 00Containing by weight more than 0,06 % but less than 0,25 % of carbon
- 7213 91 70 00Containing by weight 0,25 % or more but not more than 0,75 % of carbon
- 7213 91 90 00Containing by weight more than 0,75 % of carbon
- 7213 99 10 00Containing by weight less than 0,25 % of carbon
- 7213 99 90 00Containing by weight 0,25 % or more of carbon
7214 Muut tangot, rautaa tai seostamatonta terästä, ei enempää valmistetut kuin taotut, kuumavalssatut, kuumavedetyt tai kuumapursotetut, kuitenkin myös tangot, joita on valssauksen jälkeen kierretty
- 7214 10 00 00Other bars and rods of iron or non-alloy steel, not further: forged
- 7214 20 00 00Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
- 7214 30 00 00Other, of free-cutting steel
- 7214 91 10 00Containing by weight less than 0,25 % of carbon
- 7214 91 90 00Containing by weight 0,25 % or more of carbon
- 7214 99 10 00Of a type used for concrete reinforcement
- 7214 99 31 0080 mm or more
- 7214 99 39 00Less than 80 mm
- 7214 99 50 00Other, of free-cutting steel: other
- 7214 99 71 0080 mm or more
- 7214 99 79 00Less than 80 mm
- 7214 99 95 00Other, of free-cutting steel: other
7215 Muut tangot, rautaa tai seostamatonta terästä
- 7215 10 00 00Of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215 50 11 00Of rectangular (other than square) cross-section
- 7215 50 19 00Other, not further worked than cold-formed or cold-finished: other
- 7215 50 80 00Containing by weight 0,25 % or more of carbon
- 7215 90 00 00Other bars and rods of iron or non-alloy steel: other
7216 Profiilit, rautaa tai seostamatonta terästä
- 7216 10 00 00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216 21 00 00U, I or H sections, not further worked than hot-rolled: l sections
- 7216 22 00 00U, I or H sections, not further worked than hot-rolled: t sections
- 7216 31 10 00Of a height of 80 mm or more but not exceeding 220 mm
- 7216 31 90 00Of a height exceeding 220 mm
- 7216 32 11 00With parallel flange faces
- 7216 32 19 00U, I or H sections, not further worked than hot-rolled: i sections, other
- 7216 32 91 00With parallel flange faces
- 7216 32 99 00U, I or H sections, not further worked than hot-rolled: i sections, other
- 7216 33 10 00Of a height of 80 mm or more but not exceeding 180 mm
- 7216 33 90 00Of a height exceeding 180 mm
- 7216 40 10 00L or T sections, not further worked than hot-rolled: l sections
- 7216 40 90 00L or T sections, not further worked than hot-rolled: t sections
- 7216 50 10 00With a cross-section which is capable of being enclosed in a square the side of which is 80 mm
- 7216 50 91 00With a cross-section which is capable of being enclosed: bulb flats
- 7216 50 99 00With a cross-section which is capable of being enclosed: other
- 7216 61 10 00C, L, U, Z, omega or open-ended sections
- 7216 61 90 00Obtained from flat-rolled products: other
- 7216 69 00 00Other angles, shapes and sections, not further worked than: other
- 7216 91 10 00Cold-formed or cold-finished from flat-rolled products: profiled (ribbed) sheets
- 7216 91 80 00Cold-formed or cold-finished from flat-rolled products: other
- 7216 99 00 00Other angles, shapes and sections, not further worked than: other
7217 Lanka, rautaa tai seostamatonta terästä
- 7217 10 10 00With a maximum cross-sectional dimension of less than 0,8 mm
- 7217 10 31 00Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7217 10 39 00With a maximum cross-sectional dimension of less than 0,8 mm: other
- 7217 10 50 00Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 10 90 00Containing by weight 0,6 % or more of carbon
- 7217 20 10 00With a maximum cross-sectional dimension of less than 0,8 mm
- 7217 20 30 00With a maximum cross-sectional dimension of 0,8 mm or more
- 7217 20 50 00Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 20 90 00Containing by weight 0,6 % or more of carbon
- 7217 30 41 00Plated or coated with other base metals: copper-coated
- 7217 30 49 00Plated or coated with other base metals: other
- 7217 30 50 00Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 30 90 00Containing by weight 0,6 % or more of carbon
- 7217 90 20 00Containing by weight less than 0,25 % of carbon
- 7217 90 50 00Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 90 90 00Containing by weight 0,6 % or more of carbon
7218 Ruostumaton teräs, valanteina tai muussa alkumuodossa; välituotteet, ruostumatonta terästä
- 7218 10 00 00Ingots and other primary forms
- 7218 91 10 00Containing by weight 2,5 % or more of nickel
- 7218 91 80 00Containing by weight less than 2,5 % of nickel
- 7218 99 11 00Rolled or obtained by continous casting
- 7218 99 19 00Ingots and other primary forms: other, forged
- 7218 99 20 00Rolled or obtained by continuous casting
- 7218 99 80 00Ingots and other primary forms: other, forged
7219 Levyvalmisteet, ruostumatonta terästä, leveys vähintään 600 mm
- 7219 11 00 00Of a thickness exceeding 10 mm
- 7219 12 10 00Containing by weight 2,5 % or more of nickel
- 7219 12 90 00Containing by weight less than 2,5 % of nickel
- 7219 13 10 00Containing by weight 2,5 % or more of nickel
- 7219 13 90 00Containing by weight less than 2,5 % of nickel
- 7219 14 10 00Containing by weight 2,5 % or more of nickel
- 7219 14 90 00Containing by weight less than 2,5 % of nickel
- 7219 21 10 00Containing by weight 2,5 % or more of nickel
- 7219 21 90 00Containing by weight less than 2,5 % of nickel
- 7219 22 10 00Containing by weight 2,5 % or more of nickel
- 7219 22 90 00Containing by weight less than 2,5 % of nickel
- 7219 23 00 00Of a thickness of 3 mm or more but less than 4,75 mm
- 7219 24 00 00Of a thickness of less than 3 mm
- 7219 31 00 00Of a thickness of 4,75 mm or more
- 7219 32 10 00Containing by weight 2,5 % or more of nickel
- 7219 32 90 00Containing by weight less than 2,5 % of nickel
- 7219 33 10 00Containing by weight 2,5 % or more of nickel
- 7219 33 90 00Containing by weight less than 2,5 % of nickel
- 7219 34 10 00Containing by weight 2,5 % or more of nickel
- 7219 34 90 00Containing by weight less than 2,5 % of nickel
- 7219 35 10 00Containing by weight 2,5 % or more of nickel
- 7219 35 90 00Containing by weight less than 2,5 % of nickel
- 7219 90 20 00Flat-rolled products of stainless steel, of a width of 600: other, perforated
- 7219 90 80 00Flat-rolled products of stainless steel, of a width of 600: other
7220 Levyvalmisteet ruostumatonta terästä, leveys pienempi kuin 600 mm
- 7220 11 00 00Of a thickness of 4,75 mm or more
- 7220 12 00 00Of a thickness of less than 4,75 mm
- 7220 20 21 002,5 % or more of nickel
- 7220 20 29 00Less than 2,5 % of nickel
- 7220 20 41 002,5 % or more of nickel
- 7220 20 49 00Less than 2,5 % of nickel
- 7220 20 81 002,5 % or more of nickel
- 7220 20 89 00Less than 2,5 % of nickel
- 7220 90 20 00Flat-rolled products of stainless steel, of a width of less: other, perforated
- 7220 90 80 00Flat-rolled products of stainless steel, of a width of less: other
7221 Tangot, kuumavalssatut, säännöttömästi kiepitetyt, ruostumatonta terästä
7222 Muut tangot, ruostumatonta terästä; profiilit, ruostumatonta terästä
- 7222 11 11 002,5 % or more of nickel
- 7222 11 19 00Less than 2,5 % of nickel
- 7222 11 81 002,5 % or more of nickel
- 7222 11 89 00Less than 2,5 % of nickel
- 7222 19 10 00Containing by weight 2,5 % or more of nickel
- 7222 19 90 00Containing by weight less than 2,5 % of nickel
- 7222 20 11 002,5 % or more of nickel
- 7222 20 19 00Less than 2,5 % of nickel
- 7222 20 21 002,5 % or more of nickel
- 7222 20 29 00Less than 2,5 % of nickel
- 7222 20 31 002,5 % or more of nickel
- 7222 20 39 00Less than 2,5 % of nickel
- 7222 20 81 002,5 % or more of nickel
- 7222 20 89 00Less than 2,5 % of nickel
- 7222 30 51 002,5 % or more of nickel
- 7222 30 91 00Less than 2,5 % of nickel
- 7222 30 97 00Other bars and rods: other
- 7222 40 10 00Not further worked than hot-rolled, hot-drawn or extruded
- 7222 40 50 00Not further worked than cold-formed or cold-finished
- 7222 40 90 00Angles, shapes and sections: other
7223 Lanka, ruostumatonta terästä
- 7223 00 11 00Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium
- 7223 00 19 00Wire of stainless steel: other
- 7223 00 91 00Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium
- 7223 00 99 00Wire of stainless steel: other
7224 Muu seosteräs, valanteina tai muussa alkumuodossa; välituotteet, muuta seosterästä
- 7224 10 10 00Ingots and other primary forms: of tool steel
- 7224 10 90 00Ingots and other primary forms: other
- 7224 90 02 00Other alloy steel in ingots or other primary forms: other, of tool steel
- 7224 90 03 00Other alloy steel in ingots or other primary forms: other, of tool steel, of high-speed steel
- 7224 90 05 00Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
- 7224 90 07 00Other alloy steel in ingots or other primary forms: other, of tool steel, other
- 7224 90 14 00Other alloy steel in ingots or other primary forms: other, of tool steel, other
- 7224 90 18 00Other alloy steel in ingots or other primary forms: other, of tool steel, forged
- 7224 90 31 00Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7224 90 38 00Other alloy steel in ingots or other primary forms: other, of tool steel, forged, other
- 7224 90 90 00Other alloy steel in ingots or other primary forms: other, of tool steel, forged
7225 Levyvalmisteet, muuta seosterästä, leveys vähintään 600 mm
- 7225 11 00 00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7225 19 10 00Flat-rolled products of other alloy steel, of a width: other, hot-rolled
- 7225 19 90 00Flat-rolled products of other alloy steel, of a width: other, cold-rolled
- 7225 30 10 00Other, not further worked than hot-rolled, in coils: of tool steel
- 7225 30 30 00Other, not further worked than hot-rolled, in coils: of high-speed steel
- 7225 30 90 00Other, not further worked than hot-rolled, in coils: other
- 7225 40 12 00Other, not further worked than hot-rolled, not in coils: of tool steel
- 7225 40 15 00Other, not further worked than hot-rolled, not in coils: of high-speed steel
- 7225 40 40 00Of a thickness exceeding 10 mm
- 7225 40 60 00Of a thickness of 4,75 mm or more but not exceeding 10 mm
- 7225 40 90 00Of a thickness of less than 4,75 mm
- 7225 50 20 00Other, not further worked than cold-rolled (cold-reduced): of high-speed steel
- 7225 50 80 00Other, not further worked than cold-rolled (cold-reduced): other
- 7225 91 00 00Electrolytically plated or coated with zinc
- 7225 92 00 00Otherwise plated or coated with zinc
- 7225 99 00 00Other, not further worked than cold-rolled (cold-reduced): other
7226 Levyvalmisteet muuta seosterästä, leveys pienempi kuin 600 mm
- 7226 11 00 00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7226 19 10 00Not further worked than hot-rolled
- 7226 19 80 00Flat-rolled products of other alloy steel, of a width: other
- 7226 20 00 00Flat-rolled products of other alloy steel, of a width: of high-speed steel
- 7226 91 20 00Not further worked than hot-rolled: of tool steel
- 7226 91 91 00Of a thickness of 4,75 mm or more
- 7226 91 99 00Of a thickness of less than 4,75 mm
- 7226 92 00 00Not further worked than cold-rolled (cold-reduced)
- 7226 99 10 00Electrolytically plated or coated with zinc
- 7226 99 30 00Otherwise plated or coated with zinc
- 7226 99 70 00Flat-rolled products of other alloy steel, of a width: of high-speed steel, other
7227 Tangot, kuumavalssatut, säännöttömästi kiepitetyt, muuta seosterästä
- 7227 10 00 00Bars and rods, hot-rolled, in irregularly wound coils: of high-speed steel
- 7227 20 00 00Bars and rods, hot-rolled, in irregularly wound coils: of silico-manganese steel
- 7227 90 10 00Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
- 7227 90 50 00Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7227 90 95 00Bars and rods, hot-rolled, in irregularly wound coils: other
7228 Muut tangot, muuta seosterästä; profiilit, muuta seosterästä; ontot poratangot, seosterästä tai seostamatonta terästä
- 7228 10 20 00Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 10 50 00Bars and rods, of high-speed steel: forged
- 7228 10 90 00Bars and rods, of high-speed steel: other
- 7228 20 10 00Of rectangular (other than square) cross-section, hot-rolled on four faces
- 7228 20 91 00Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 20 99 00Of rectangular: other
- 7228 30 20 00Other bars and rods, not further worked than hot-rolled: of tool steel
- 7228 30 41 00Of circular cross-section of a diameter of 80 mm or more
- 7228 30 49 00Other bars and rods, not further worked than hot-rolled: of tool steel, other
- 7228 30 61 0080 mm or more
- 7228 30 69 00Less than 80 mm
- 7228 30 70 00Of rectangular (other than square) cross-section, hot-rolled on four faces
- 7228 30 89 00Other bars and rods, not further worked than hot-rolled: of tool steel, other
- 7228 40 10 00Other bars and rods, not further worked than forged: of tool steel
- 7228 40 90 00Other bars and rods, not further worked than forged: other
- 7228 50 20 00Other bars and rods, not further worked than cold-formed: of tool steel
- 7228 50 40 00Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7228 50 61 0080 mm or more
- 7228 50 69 00Less than 80 mm
- 7228 50 80 00Containing by weight 0,9 % or more but not more than 1,15 %: other
- 7228 60 20 00Other bars and rods: of tool steel
- 7228 60 80 00Other bars and rods: other
- 7228 70 10 00Not further worked than hot-rolled, hot-drawn or extruded
- 7228 70 90 00Angles, shapes and sections: other
- 7228 80 00 00Hollow drill bars and rods
7229 Lanka, muuta seosterästä
- 7229 20 00 00Wire of other alloy steel: of silico-manganese steel
- 7229 90 20 00Wire of other alloy steel: other, of high-speed steel
- 7229 90 50 00Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7229 90 90 00Wire of other alloy steel: other