Den britiske toldtarif (UK Global Tariff)
Den britiske toldtarif (UK Global Tariff), kapitel 39: Plast og varer deraf
- 564Tarifpositioner
- 0 %–6,5 %Sats
Kapitel 39 har 564 tarifpositioner i den britiske toldtarif, fordelt på 26 positioner.
Satserne går fra 0 % til 6,5 % (gennemsnit 4,8 %); 107 tarifpositioner har en sats på 0 %.
Flest tarifpositioner, 95, ligger under position 3920 (»Andre plader, ark, film, folier, bånd og strimler, af plast undtagen…«).
Den hyppigste sats er 6 %, som gælder for 438 tarifpositioner.
Den højeste sats, 6,5 %, gælder for 3924 90 00 10 (»Ironing boards, including sleeve boards, whether or not free…«).
3901 Polymerer af ethylen, i ubearbejdet form
- 3901 10 10 20High flow linear low density polyethylene-1-butene / lldpe (cas rn 25087-34-7) in form of powder, with -a melt flow rate (mfr 190 °c/2.16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (astm d 1505) of 0.922 g/cm³ or more, but not more than 0.926 g/cm³ and -a vicat softening temperature of min. 94 °c
- 3901 10 10 50Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with: -a density (astm d 1505) of 0.924 g/cm³ or more but not more than 0.928 g/cm³, -a melt flow rate (190 °c/2.16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °c or more but not more than 124 °c
- 3901 10 10 60Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with: -a density (astm d 1505) of 0.922 g/cm³ or more but not more than 0.926 g/cm³ and -a melt flow rate (190 °c/2.16 kg) of 18 g/10 min or more but not more than 22 g/10 min
- 3901 10 10 90Polyethylene having a specific gravity of less than 0.94: linear polyethylene, other
- 3901 10 90 30Polyethylene granules, containing by weight 10% or more but not more than 25% of copper
- 3901 10 90 90Polyethylene having a specific gravity of less than 0.94: other, other
- 3901 20 10 00Polyethylene in one of the forms mentioned in note 6(b) to this chapter, of a specific gravity of 0.958 or more at 23 °c, containing: - 50 mg/kg or less of aluminium, - 2 mg/kg or less of calcium, - 2 mg/kg or less of chromium, - 2 mg/kg or less of iron, - 2 mg/kg or less of nickel, - 2 mg/kg or less of titanium and - 8 mg/kg or less of vanadium, for the manufacture of chlorosulphonated polyethylene
- 3901 20 90 00Polyethylene having a specific gravity of 0.94 or more: other
- 3901 30 00 10For cavity filling, for use in certain types of aircraft
- 3901 30 00 20Copolymer of ethylene and vinyl acetate (cas rn 24937-78-8) -containing by weight 28% or more but not more than 49% of vinyl acetate, -with a melt flow rate of less than 5g/10 min (190 °c/2.16 kg, astm d1238), -in the form of pellets
- 3901 30 00 30Terpolymer of ethylene, vinyl acetate and methacrylic acid (cas rn 26375-31-5)
- 3901 30 00 99Polymers of ethylene, in primary forms: ethylene-vinyl acetate copolymers, other
- 3901 40 00 10High flow linear low density polyethylene-1-butene / lldpe (cas rn 25087-34-7) in form of powder, with -a melt flow rate (mfr 190 °c/2.16 kg) of 16g/10 min or more, but not more than 24 g/10 min and -a density (astm d 1505) of 0.922 g/cm³ or more, but not more than 0.926 g/cm³ and -a vicat softening temperature of min. 94 °c
- 3901 40 00 30Octene linear low-density polyethylene (lldpe) produced by a ziegler-natta catalyst method in the form of pellets with: - more than 10% but not more than 20% by weight of copolymer, - a melt flow rate (mfr 190°c/2.16 kg) of 0.7 g / 10 min or more but not more than 0.9 g / 10 min, and - a density (astm d4703) of 0.911 g/cm³ or more, but not more than 0.913 g/cm³ for use in the co-extrusion processing of films for flexible food packaging
- 3901 40 00 50Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with: -a density (astm d 1505) of 0.924 g/cm³ or more but not more than 0.928 g/cm³, -a melt flow rate (190 °c/2.16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °c or more but not more than 124 °c
- 3901 40 00 60Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with: -a density (astm d 1505) of 0.922 g/cm³ or more but not more than 0.926 g/cm³ and -a melt flow rate (190 °c/2.16 kg) of 18 g/10 min or more but not more than 22 g/10 min
- 3901 40 00 90Ethylene-alpha-olefin copolymers, having a specific gravity: other
- 3901 90 30 00Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; a-b-a block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35% or less of styrene, in one of the forms mentioned in note 6(b) to this chapter
- 3901 90 80 10For cavity filling, for use in certain types of aircraft
- 3901 90 80 53Copolymer of ethylene and acrylic acid (cas rn 9010-77-9) with - an acrylic acid content of 18.5% or more but not more than 49.5% by weight (astm d4094), and - a melt flow rate of 10g/10 min (mfr 125 °c/2.16 kg, astm d1238) or more
- 3901 90 80 55Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: - an acrylic acid content of 6% or more but not more than 50% by weight, and - a melt flow rate of 1g/10 min or more at 190 °c/2.16 kg (measured using astm d1238)
- 3901 90 80 67Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11% by weight or more
- 3901 90 80 73Mixture containing by weight - 80% or more, but not more than 94% of chlorinated polyethylene (cas rn 64754-90-1) and - 6% or more, but not more than 20% of styrene-acrylic copolymer (cas rn 27136-15-8)
- 3901 90 80 75Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (cas rn 37433-35-5), in the form of pellets
- 3901 90 80 85Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (cas rn 61843-70-7) in the form of pellets
- 3901 90 80 91Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid
- 3901 90 80 92Polymers of ethylene, in primary forms: other, other, other, chlorosulphonated polyethylene
- 3901 90 80 93Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets
- 3901 90 80 94Mixtures of a-b block copolymer of polystyrene and ethylene-butylene copolymer and a-b-a block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35% of styrene
- 3901 90 80 97Chlorinated polyethylene, in the form of powder
- 3901 90 80 99Polymers of ethylene, in primary forms: other, other, other, other
3902 Polymerer af propylen eller andre olefiner, i ubearbejdet form
- 3902 10 00 20Polypropylene, containing no plasticiser, - of a melting point of more than 150 °c (as determined by the astm d 3417 method), - of a heat of fusion of 15 j/g or more but not more than 70 j/g, - of an elongation at break of 1 000% or more (as determined by the astm d 638 method), - of a tensile modulus of 69 mpa or more but not more than 379 mpa (as determined by the astm d 638 method)
- 3902 10 00 90Polymers of propylene or of other olefins, in primary forms: polypropylene, other
- 3902 20 00 20Hydrogenated polyisobutene, in liquid form
- 3902 20 00 90Polymers of propylene or of other olefins, in primary forms: polyisobutylene, other
- 3902 30 00 10For cavity filling, for use in certain types of aircraft
- 3902 30 00 20Hydrogenated block copolymer of styrene and isoprene (cas rn 68648-89-5), containing by weight less than 37% of styrene
- 3902 30 00 30Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28% or more, but not more than 55% of propylene
- 3902 30 00 95A-b-a block copolymer, consisting of: - a copolymer of propylene and ethylene and - 21% (± 3%) by weight of polystyrene
- 3902 30 00 97Liquid ethylene-propylene-copolymer with: - a flashpoint of 250 °c or more, - a viscosity index of 150 or more, - of a number average molecular weight (m@n) of 650 or more
- 3902 30 00 99Polymers of propylene or of other olefins, in primary forms: propylene copolymers, other, other
- 3902 90 10 00A-b-a block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35% or less of styrene, in one of the forms mentioned in note 6(b) to this chapter
- 3902 90 20 00Polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight 10% or less of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight 10% or less of polyethylene and/or 25% or less of polypropylene, in one of the forms mentioned in note 6(b) to this chapter
- 3902 90 90 10For cavity filling, for use in certain types of aircraft
- 3902 90 90 60Non-hydrogenated 100% aliphatic resin (polymer), with the following characteristics: - liquid at room temperature - obtained by cationic polymerisation of c-5 alkenes monomers - with a number average molecular weight (mn) of 370 (± 50) - with a weight average molecular weight (mw) of 500 (± 100)
- 3902 90 90 63Hydrogenated poly(1-octene) (cas rn 70693-43-5)
- 3902 90 90 65Brominated butadiene-styrene copolymer (cas rn 1195978-93-8) with a bromine content of 60% by weight or more but not more than 68%, in forms as defined in note 6 (b) to chapter 39
- 3902 90 90 70Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes (measured at 100 ° celsius according to the astm d 445 method), obtained by polymerisation of dodecene with or without: -not more than 40% by weight of tetradecene and/or -not more than 2% by weight decene and/or -not more than 2% by weight of hexadecene
- 3902 90 90 94Chlorinated polyolefins, whether or not in a solution or dispersion
- 3902 90 90 99Polymers of propylene or of other olefins, in primary forms: other, other, other, other
3903 Polymerer af styren, i ubearbejdet form
- 3903 11 00 00Polymers of styrene, in primary forms: polystyrene, expansible
- 3903 19 00 40Crystalline polystyrene with: - a melting point of 268 °c or more but not more than 272 °c - a setting point of 232 °c or more but not more than 247 °c, - whether or not containing additives and filling material
- 3903 19 00 90Polymers of styrene, in primary forms: polystyrene, other, other
- 3903 20 00 00Polymers of styrene, in primary forms: styrene-acrylonitrile (san) copolymers
- 3903 30 00 00Polymers of styrene, in primary forms: acrylonitrile-butadiene-styrene (abs) copolymers
- 3903 90 10 00Copolymer, solely of styrene with allyl alcohol, of an acetyl value of 175 or more
- 3903 90 20 00Brominated polystyrene, containing by weight 58% or more but not more than 71% of bromine, in one of the forms mentioned in note 6(b) to this chapter
- 3903 90 90 20Copolymer in the form of granules containing by weight: - 83 ± 3% styrene, - 7 ± 2% n-butyl acrylate, - 9 ± 2% n-butyl methacrylate and - 0.01% or more but not more than 1% of polyolefinic wax
- 3903 90 90 35Copolymer of _α_-methylstyrene and styrene, having a softening point exceeding 113 ºc
- 3903 90 90 38Polytetrafluoroethylene (cas rn 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (cas rn 9003-54-7), with a content by weight of each polymer of 50% (± 1%)
- 3903 90 90 43Mixture of polymers consisting by weight of: -10% or more but not more than 30% of a styrene-ethylene-butylene-styrene block copolymer (cas rn 66070-58-4), -25% or more but not more than 45% of mineral oil (cas rn 8042-47-5), -25% or more but not more than 45% of calcium carbonate (cas rn 1317-65-3), -10% or more but not more than 20% of polypropylene (cas rn 9003-07-0), and -1% or more but not more than 3% of a copolymer of α-methylstyrene and vinyltoluene (cas rn 9017-27-0)
- 3903 90 90 60Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, in flake or powder form
- 3903 90 90 70Copolymer in the form of granules containing by weight: - 75% (± 7%) styrene and - 25% (± 7%) methylmethacrylate
- 3903 90 90 86Mixture containing by weight: - 45% or more but not more than 65% of polymers of styrene, - 30% or more but not more than 45% of poly(phenylene ether), and - not more than 11% of additives
- 3903 90 90 90Polymers of styrene, in primary forms: other, other, other
3904 Polymerer af vinylchlorid eller andre halogenerede olefiner, i ubearbejdet form
- 3904 10 00 15Suspension polyvinylchloride (‘s-pvc’), not mixed with any other substance
- 3904 10 00 21Polyvinyl chloride polymerised through suspension polymerisation (‘s-pvc’) and bulk (mass) polymerisation (‘m-pvc’) in pure form and not mixed with any other substance (‘s-/m-pvc’). the product concerned includes s-pvc classified as commodity s-pvc, extender s-pvc and specialty s-pvc. the product concerned does not include pvc polymerised through emulsion polymerisation (‘e-pvc’)
- 3904 10 00 25In the form of granules, for use in certain types: other
- 3904 10 00 80Suspension polyvinylchloride (‘s-pvc’), not mixed with any other substance
- 3904 10 00 81Polyvinyl chloride polymerised through suspension polymerisation (‘s-pvc’) and bulk (mass) polymerisation (‘m-pvc’) in pure form and not mixed with any other substance (‘s-/m-pvc’). the product concerned includes s-pvc classified as commodity s-pvc, extender s-pvc and specialty s-pvc. the product concerned does not include pvc polymerised through emulsion polymerisation (‘e-pvc’)
- 3904 10 00 85Poly(vinyl chloride), not mixed with any other substances: other, other
- 3904 21 00 10In the form of granules, for use in certain types of aircraft
- 3904 21 00 90Polymers of vinyl chloride or of other halogenated olefins: other poly(vinyl chloride), non-plasticised, other
- 3904 22 00 10In the form of granules, for use in certain types of aircraft
- 3904 22 00 90Polymers of vinyl chloride or of other halogenated olefins: other poly(vinyl chloride), plasticised, other
- 3904 30 00 00Vinyl chloride-vinyl acetate copolymers
- 3904 40 00 10For cavity filling, for use in certain types of aircraft
- 3904 40 00 99Other vinyl chloride copolymers: other
- 3904 50 10 00Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of 4 micrometres or more but not more than 20 micrometres
- 3904 50 90 10For cavity filling, for use in certain types of aircraft
- 3904 50 90 99Polymers of vinyl chloride or of other halogenated olefins: vinylidene chloride polymers, other, other
- 3904 61 00 20Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3.2% or more but not more than 4.6% by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions
- 3904 61 00 90Polymers of vinyl chloride or of other halogenated olefins: fluoropolymers, polytetrafluoroethylene, other
- 3904 69 10 00Poly(vinyl fluoride), in one of the forms mentioned in note 6(b) to this chapter
- 3904 69 20 00Polymers of vinyl chloride or of other halogenated olefins: fluoropolymers, other, fluoroelastomers fkm
- 3904 69 80 10For cavity filling, for use in certain types of aircraft
- 3904 69 80 20Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (cas rn 94228-79-2)
- 3904 69 80 30Copolymer of tetrafluoroethylene, hexafluoropropene and ethene
- 3904 69 80 85Copolymer of ethylene and chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, whether or not containing fillers
- 3904 69 80 88Polytetrafluoroethylene (cas rn 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (cas rn 9003-54-7), with a content by weight of each polymer of 50% (± 1%)
- 3904 69 80 96Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to chapter 39
- 3904 69 80 97Copolymer of chlorotrifluoroethylene and vinylidene difluoride
- 3904 69 80 99Polymers of vinyl chloride or of other halogenated olefins: fluoropolymers, other, other, other, other
- 3904 90 00 10For cavity filling, for use in certain types of aircraft
- 3904 90 00 90Polymers of vinyl chloride or of other halogenated olefins: other, other
3905 Polymerer af vinylacetat eller andre vinylestere, i ubearbejdet form; andre vinylpolymerer i ubearbejdet form
- 3905 12 00 00Polymers of vinyl acetate or of other vinyl esters: poly(vinyl acetate), in aqueous dispersion
- 3905 19 00 10For cavity filling, for use in certain types of aircraft
- 3905 19 00 90Polymers of vinyl acetate or of other vinyl esters: poly(vinyl acetate), other, other
- 3905 21 00 00Polymers of vinyl acetate or of other vinyl esters: vinyl acetate copolymers, in aqueous dispersion
- 3905 29 00 10For cavity filling, for use in certain types of aircraft
- 3905 29 00 90Polymers of vinyl acetate or of other vinyl esters: vinyl acetate copolymers, other, other
- 3905 30 00 10Viscous preparation, essentially consisting of poly(vinyl alcohol) (cas rn 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors
- 3905 30 00 91Other than for the manufacturing of dry-blend adhesives, produced and sold in powder form for the carton board industry
- 3905 30 00 92In the form of homopolymer resins with a viscosity: other
- 3905 30 00 95Poly(vinyl alcohol), whether or not containing unhydrolysed: other, other
- 3905 91 00 10For cavity filling, for use in certain types of aircraft
- 3905 91 00 25Copolymer of vinylcaprolactam and vinylpyrrolidone (cas rn 51987-20-3) in the form of a solution in 2-butoxyethanol (cas rn 111-76-2) containing by weight 45% or more but not more than 58% of copolymer
- 3905 91 00 35Aqueous solution of a copolymer of vinylpyrrolidone and n,n-dimethylaminopropyl methacrylamide sulfate (cas rn 175893-71-7), containing by weight 8% or more, but not more than 12% of copolymer
- 3905 91 00 40Water soluble copolymer of ethylene and vinyl alcohol (cas rn 26221-27-2), containing by weight not more than 38% of the monomer unit ethylene
- 3905 91 00 50Aqueous solution consisting by weight of: -10% or more but not more than 20% of a copolymer of vinyl pyrrolidone, n,n-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (cas rn 306769-73-3), -not more than 1% preservatives
- 3905 91 00 60Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (cas rn 102972-64-5) in solid form, or as an aqueous solution containing by weight: -27% or more but not more than 33% of copolymer, -not more than 1.5% of ethanol (cas rn 64-17-5), -not more than 1% of preservatives
- 3905 91 00 70Aqueous solution, containing by weight: -25% or more but not more than 35% of a copolymer of vinyl caprolactam, vinyl pyrrolidone, n,n-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (cas rn 748809-45-2), -10% or more but not more than 16% of ethanol (cas rn 64-17-5) whether or not denatured with tert-butyl alcohol (cas rn 75-65-0) and/or denatonium benzoate (cas rn 3734-33-6)
- 3905 91 00 80Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (cas rn 83120-95-0)
- 3905 91 00 90Polymers of vinyl acetate or of other vinyl esters: other, copolymers, other
- 3905 99 10 00Poly(vinyl formal), in one of the forms mentioned in note 6(b) to this chapter, of a molecular weight of 10 000 or more but not exceeding 40 000 and containing by weight: - 9.5% or more but not more than 13% of acetyl groups evaluated as vinyl acetate and - 5% or more but not more than 6.5% of hydroxy groups evaluated as vinyl alcohol
- 3905 99 90 10For cavity filling, for use in certain types of aircraft
- 3905 99 90 30Povidone (inn) iodine (cas rn 25655-41-8) with a purity by weight of 92% or more
- 3905 99 90 81Poly(vinyl butyral)(cas rn 63148-65-2): — containing by weight 17.5% or more, but not more than 20% of hydroxyl groups, and — with a median particle size (d50) of more than 0.6 mm
- 3905 99 90 95Hexadecylated or eicosylated polyvinylpyrrolidone
- 3905 99 90 96Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to chapter 39, of a weight average molecular weight (m@w) of 25 000 or more but not more than 150 000 and containing by weight: - 9.5% or more but not more than 13% of acetyl groups evaluated as vinyl acetate and - 5% or more but not more than 6.5% of hydroxy groups evaluated as vinyl alcohol
- 3905 99 90 98Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78% or more but not more than 82% of triacontyl groups
- 3905 99 90 99Polymers of vinyl acetate or of other vinyl esters: other, other, other, other, other
3906 Polymerer af acryl, i ubearbejdet form
- 3906 10 00 00Acrylic polymers in primary forms: poly(methyl methacrylate)
- 3906 90 10 00Acrylic polymers in primary forms: other, poly[n-(3-hydroxyimino-1.1-dimethylbutyl)acrylamide]
- 3906 90 20 00Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in n,n-dimethylacetamide, containing by weight 55% or more of copolymer
- 3906 90 30 00Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10% or more but not more than 11% of 2-ethylhexyl acrylate
- 3906 90 40 00Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (nbr)
- 3906 90 50 00Polymerisation product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes
- 3906 90 60 00Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50% or more of methyl acrylate, whether or not compounded with silica
- 3906 90 90 17Superabsorbent polymers, insoluble in water, which result from a polymerisation of acrylic monomer molecules with crosslinkers to form crosslinked polymer networks, with a high capacity to absorb and retain water and aqueous liquids
- 3906 90 90 23Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (cas rn 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm
- 3906 90 90 28Mixture containing by weight: -80% or more but not more than 90% of a core shell polymer of butyl acrylate, ethyl acrylate, methyl-acrylate and allyl methacrylate (cas rn 73026-23-0) and -10% or more but not more than 20% of a copolymer of methyl methacrylate and ethyl acrylate (cas rn 9010-88-2)
- 3906 90 90 43Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (cas rn 143106-82-5)
- 3906 90 90 50Polymers of esters of acrylic acid with one or more of the following monomers in the chain: - chloromethyl vinyl ether, - chloroethyl vinyl ether, - chloromethylstyrene, - vinyl chloroacetate, - methacrylic acid, - butenedioic acid monobutyl ester, - butenedioic acid monocyclohexyl ester containing by weight not more than 5% of each monomer unit
- 3906 90 90 58Mixture of polymers, containing by weight: -77% or more but not more than 81% of polyacrylamide (cas rn 9003-05-8), -18% or more but not more than 21% of polyethylene glycol (cas rn 25322-68-3)
- 3906 90 90 60Aqueous dispersion containing by weight: - more than 10% but not more than 15% of ethanol, and - more than 7% but not more than 11% of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative
- 3906 90 90 71Acrylonitrile-styrene-acrylate copolymer in the form of granules containing by weight: -48% of styrene, -22% of acrylonitrile, -29% of butylacrylate, and -1% of dihydrodicyclopentadienyl acrylate
- 3906 90 90 73Preparation containing by weight: - 33% or more but not more than 37% of butyl methacrylate - methacrylic acid copolymer, - 24% or more but not more than 28% of propylene glycol, and - 37% or more but not more than 41% of water
- 3906 90 90 90Acrylic polymers in primary forms: other, other, other
3907 Polyacetaler og andre polyethere samt epoxyharpikser, i ubearbejdet form; polycarbonater, alkydharpikser, polyallylestere og andre polyestere, i ubearbejdet form
- 3907 10 00 00Polyacetals, other polyethers and epoxide resins: polyacetals
- 3907 21 00 00Polyacetals, other polyethers and epoxide resins: other polyethers, bis(polyoxyethylene) methylphosphonate
- 3907 29 11 10Poly(ethylene oxide) of a number average molecular weight (m@n) of 100 000 or more
- 3907 29 11 20Bis[methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (m@n) of 40 000
- 3907 29 11 30Mixture containing by weight: -75% or more of polyethyleneglycol modified butyl-2-cyano-3-(4-hydroxy-3-methoxyphenyl) acrylate, with an ethylene oxide chain length of not more than 30 (cas rn 780763-40-8) -not more than 25% of ethoxylated sorbitan trioleate (cas rn 9005-70-3)
- 3907 29 11 40Ethoxylated glycerol (cas rn 31694-55-0) with a hydroxyl number of 541 or more but not more than 587 (astm 4274)
- 3907 29 11 90Polyacetals, other polyethers and epoxide resins: other polyethers, other, polyether alcohols, polyethylene glycols, other
- 3907 29 20 35Mixture containing by weight: - 5% or more but not more than 15% of a copolymer of glycerol, propylene oxide and ethylene oxide (cas rn 9082-00-2), and - 85% or more but not more than 95% of a copolymer of sucrose, propylene oxide and ethylene oxide (cas rn 26301-10-0)
- 3907 29 20 40Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran (cas rn 38640-26-5) with a number average molecular weight (mn) of 900 or more but not more than 3 600
- 3907 29 20 45Polyacetals, other polyethers and epoxide resins: other polyethers, other, polyether alcohols, other, 4-(1.1,3.3-tetramethylbutyl)phenol, ethoxylated
- 3907 29 20 50Poly(p-phenylene oxide) in the form of powder - with a glasstransitiontemperature of 210 °c or more, - with a weight average molecular weight (mw) of 35 000 or ore but not more than 80 000 - with an inherent viscosity of 0.2 or more but not more than 0.6 dl/gram
- 3907 29 20 554-nonylphenol, branched and linear, ethoxylated
- 3907 29 20 63Preparation containing by weight -5% or more but not more than 15% of polyethylene-polypropylene glycol (cas rn 9003-11-6) and -85% or more but not more than 95% of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl)amino)-2-methylphenyl)diazenyl)-3-methyl-2.4-thiophenedicarbonitrile (2:1) (cas rn 515857-23-5)
- 3907 29 20 65Preparation containing by weight -40% or more but not more than 60% of oxirane, 2-methyl-, polymer with oxirane, ether with 2.2-[[3-methyl-4-[(4-methyl-2-benzothiazolyl)azo]phenyl]imino]bis[ethanol] (2:1) (cas rn 229306-55-2) and -40% or more but not more than 60% of polyethylene-polypropylene glycol (cas rn 9003-11-6)
- 3907 29 20 68Preparation containing by weight -90% or more but not more than 99% of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-(bis(2-hydroxyethyl)amino)phenyl)-2-cyano-2-propenoate (2:1) (cas rn 152286-82-3) and -1% or more but not more than 10% of polyethylene-polypropylene glycol (cas rn 9003-11-6)
- 3907 29 20 70Preparation containing by weight -50% or more but not more than 70% of oxirane, methyl-polymer with oxirane, ether with bis(4-[bis(2-hydroxyethyl)amino)phenyl] (2-sulfophenyl)methyl (4:1), monosodium salt block (cas rn 126042-89-5) and -30% or more but not more than 50% of polyethylene-polypropylene glycol (cas rn 9003-11-6)
- 3907 29 20 73Preparation containing by weight of -23% or more but not more than 36% of oxirane, 2-methyl-,polymer with oxirane, ether with bis(4-(bis(2-hydroxyethyl)amino)phenyl)(2-sulfophenyl)methyl (4:1), monosodium salt, block (cas rn 126042-89-5), -4% or more but not more than 20% of polyethylene-polypropylene glycol (cas rn 9003-11-6), -25% or more but not more than 30% of oxirane, 2-methyl-,polymer with oxirane, ether with 2.2'-((3-methyl-4-((4-methyl-2-benzothiazolyl)azo)phenyl)imino)bis(ethanol)(2:1) (cas rn 229306-55-2), -5% or more but not more than 10% of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl)amino)-2-methylphenyl)diazenyl)-3-methyl-2.4-thiophenedicarbonitrile (2:1) (cas rn 515857-23-5) and -15% or more but not more than 25% of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-bis(2-hydroxyethyl)amino)phenyl)-2-cyano-2-propenoate (2:1) (cas rn 152286-82-3)
- 3907 29 20 75Preparation containing by weight -60% or more but not more than 80% of oxirane, 2-methyl-,polymer with oxirane, ether with 2.2',2",2"'-(sulfonylbis(4.1-phenylene)-2.1-diazenediyl(3-methyl-4.1-phenylene)nitrilo))tetrakis(ethanol) (4:1) (cas rn 927432-39-1) and -20% or more but not more than 40% of polyethylene-polypropylene glycol (cas rn 9003-11-6)
- 3907 29 20 90Polyacetals, other polyethers and epoxide resins: other polyethers, other, polyether alcohols, other, other
- 3907 29 91 00Copolymer of 1-chloro-2.3-epoxypropane with ethylene oxide
- 3907 29 99 202.3-bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (cas rn 697278-30-1) with a number average molecular weight (mn) of at least 20 kda whether or not modified with a chemical entity enabling a linkage between the peg and a protein or a peptide
- 3907 29 99 30Homopolymer of 1-chloro-2.3-epoxypropane (epichlorohydrin)
- 3907 29 99 45Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups
- 3907 29 99 50Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient
- 3907 29 99 55Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (mn) of 5 000
- 3907 29 99 60Polyacetals, other polyethers and epoxide resins: other polyethers, other, other, other, polytetramethylene oxide di-p-aminobenzoate
- 3907 29 99 70Poly(oxy-1.4-phenyleneoxy-1.4-phenylenecarbonyl-1.4-phenylene) (cas rn 29658-26-2) containing by weight not more than 35% of additives
- 3907 29 99 90Polyacetals, other polyethers and epoxide resins: other polyethers, other, other, other, other
- 3907 30 00 05Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ech’) and an aliphatic or aromatic alcoholic component (such as bpa), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups
- 3907 30 00 08Epoxide resin, halogen-free, - containing by weight more: other
- 3907 30 00 20Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ech’) and an aliphatic or aromatic alcoholic component (such as bpa), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups
- 3907 30 00 23Epoxide resin - containing by weight 21% or more of brome: other
- 3907 30 00 40Epoxide resin, containing by weight 70% or more of silicon dioxide, for the encapsulation of goods of headings 8504, 8533, 8535, 8536, 8541, 8542 or 8548
- 3907 30 00 70Preparation of epoxy resin (cas rn 29690-82-2) and phenolic resin (cas rn 9003-35-4) containing by weight: - 65% or more but not more than 75% of silicon dioxide (cas rn 60676-86-0), and - none or not more than 0.5% of carbon black (cas rn 1333-86-4)
- 3907 30 00 80Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ech’) and an aliphatic or aromatic alcoholic component (such as bpa), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups
- 3907 30 00 85Polyacetals, other polyethers and epoxide resins: epoxide resins, other, other
- 3907 40 00 25Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of 98.5% or more, in the form of pellets or granules, with a luminous transmittance of 88.5% or more, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to iso 13468-2)
- 3907 40 00 35Α-phenoxycarbonyl-ω-phenoxypoly[oxy(2.6-dibromo-1.4-phenylene) isopropylidene(3.5-dibromo-1.4-phenylene)oxycarbonyl] (cas rn 94334-64-2)
- 3907 40 00 45Α-(2.4,6-tribromophenyl)-ω-(2.4,6-tribromophenoxy)poly[oxy(2.6-dibromo-1.4-phenylene)isopropylidene(3.5-dibromo-1.4-phenylene)oxycarbonyl] (cas rn 71342-77-3)
- 3907 40 00 90Polyacetals, other polyethers and epoxide resins: polycarbonates, other
- 3907 50 00 00Polyacetals, other polyethers and epoxide resins: alkyd resins
- 3907 61 00 20Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10% by weight of cyclohexane dimethanol
- 3907 61 00 80Having a viscosity number of 78 ml/g or higher: other
- 3907 69 00 10Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1.4-diol and hexane-1.6-diol
- 3907 69 00 20Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10% by weight of cyclohexane dimethanol
- 3907 69 00 90Polyacetals, other polyethers and epoxide resins: poly(ethylene terephthalate), other, other
- 3907 70 00 00Polyacetals, other polyethers and epoxide resins: poly(lactic acid)
- 3907 91 10 00Polyacetals, other polyethers and epoxide resins: other polyesters, unsaturated, liquid
- 3907 91 90 10Diallyl phthalate prepolymer, in powder form
- 3907 91 90 90Polyacetals, other polyethers and epoxide resins: other polyesters, unsaturated, other, other
- 3907 99 05 00Thermoplastic liquid crystal aromatic polyester copolymers
- 3907 99 10 00Polyacetals, other polyethers and epoxide resins: other polyesters, other, poly(ethylene naphthalene-2.6-dicarboxylate)
- 3907 99 80 25Copolymer, containing 72% by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol
- 3907 99 80 30Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)
- 3907 99 80 35Copolymer in form of a clear, pale yellow liquid, consisting of - phthalic acid isomers and/or aliphatic dicarboxylic acids, - aliphatic diols, and - fatty acid end-caps with: - a hydroxyl number of 120 mg koh or more but not more than 350 mg koh, - a viscosity at 25 °c of 2000 cps or more but not more than 8000 cps, and - an acid value less than 10 mg koh/g
- 3907 99 80 50Aliphatic-aromatic copolyesters, namely polybutylene adipate-co-terephthalate (pbat) and polybutylene sebacate-co-terephthalate (pbset), synthesised from petrochemical or biological feedstock, in their pure form or contained in compounds containing no less than 50% of pbat or pbset polymer by weight
- 3907 99 80 70Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10% by weight of cyclohexane dimethanol
- 3907 99 80 80Copolymer, consisting of 72% by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles
- 3907 99 80 90Polyacetals, other polyethers and epoxide resins: other polyesters, other, other, other
3908 Polyamider, i ubearbejdet form
3909 Aminoplast, phenolplast og polyurethaner, i ubearbejdet form
- 3909 10 00 00Urea resins; thiourea resins
- 3909 20 00 10Polymer mixture, containing by weight: - 60% or more but not more than 75% of melamine resin (cas rn 9003-08-1), - 15% or more but not more than 25% of silicon dioxide (cas rn 14808-60-7 or 60676-86-0), - 5% or more but not more than 15% of cellulose (cas rn 9004-34-6), and - 1% or more but not more than 15% of phenolic resin (cas rn 25917-04-8)
- 3909 20 00 90Amino-resins, phenolic resins and polyurethanes, in primary: melamine resins, other
- 3909 31 00 00Poly(methylene phenyl isocyanate) (crude mdi, polymeric mdi)
- 3909 39 00 10Formaldehyde, oligomeric reaction products with aniline (cas rn 25214-70-4)
- 3909 39 00 90Amino-resins, phenolic resins and polyurethanes, in primary: other amino-resins, other, other
- 3909 40 00 00Amino-resins, phenolic resins and polyurethanes, in primary: phenolic resins
- 3909 50 10 00Polyurethane of 2.2′-(tert-butylimino)diethanol and 4.4′-methylenedicyclohexyl diisocyanate, in the form of a solution in n,n-dimethylacetamide, containing by weight 50% or more of polymer
- 3909 50 90 20Preparation containing by weight: - 14% or more but not more than 18% of ethoxylated polyurethane modified with hydrophobic groups, - 3% or more but not more than 5% of enzymatically modified starch, and - 77% or more but not more than 83% of water
- 3909 50 90 30Preparation containing by weight: - 16% or more but not more than 20% of ethoxylated polyurethane modified with hydrophobic groups, - 19% or more but not more than 23% of diethylene glycol butyl ether, and - 60% or more but not more than 64% of water
- 3909 50 90 40Preparation containing by weight: - 34% or more but not more than 36% of ethoxylated polyurethane modified with hydrophobic groups, - 37% or more but not more than 39% of propylene glycol, and - 26% or more but not more than 28% of water
- 3909 50 90 90Amino-resins, phenolic resins and polyurethanes, in primary: polyurethanes, other, other
3910 Siliconer, i ubearbejdet form
- 3910 00 00 10Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (cas rn 63148-57-2) with a purity by weight of 99.9% or more
- 3910 00 00 15Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (cas rn 68957-00-6), trimethylsiloxy-terminated
- 3910 00 00 20Block copolymer of poly(methyl-3.3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]
- 3910 00 00 25Preparations containing by weight: - 10% or more, 2-hydroxy-3-[3-[1.3,3.3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (cas rn 69861-02-5)and - 10% or more, α-butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (cas rn 146632-07-7)
- 3910 00 00 35Preparations containing by weight: - 30% or more, α -butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (cas rn 662148-59-6) and - 10% or more, n,n - dimethylacrylamide (cas rn 2680-03-7)
- 3910 00 00 40Silicones of a kind used in the manufacture of long term surgical implants
- 3910 00 00 45Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mpa·s (cas rn 70131-67-8)
- 3910 00 00 50Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum
- 3910 00 00 55Preparation containing by weight: - 55% or more but not more than 65% of vinyl terminated polydimethylsiloxane (cas rn 68083-19-2), - 30% or more but not more than 40% of dimethylvinylated and trimethylated silica (cas rn 68988-89-6), and - 1% or more but not more than 5% of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (cas rn 68988-56-7)
- 3910 00 00 70Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices
- 3910 00 00 85Two-component silicone, with a viscosity of the mixture of 3 000 cps or more, but not more than 6 000 cps (according to standard gb/t 2794) for use as an electrical insulation material in solar panels junction box in the production of solar panels
- 3910 00 00 90Silicones in primary forms: other
3911 Jordolieharpikser, cumaronindenharpikser, polyterpener, polysulfider, polysulfoner og andre produkter som nævnt i bestemmelse 3 til dette kapitel, ikke andetsteds tariferet, i ubearbejdet form
- 3911 10 00 10For cavity filling, for use in certain types of aircraft
- 3911 10 00 81Non-hydrogenated hydrocarbon resin, obtained by polymerisation of more than 75% by weight c-5 to c-12 cycloaliphatic alkenes and more than 10% but not more than 25% by weight aromatic alkenes yielding a hydrocarbon resin with: - an iodine value of more than 120 and - a gardner colour of more than 10 for the pure product or - a gardner colour of more than 8 for a 50% solution by weight in toluene (as determined by the astm method d6166)
- 3911 10 00 90Petroleum resins, coumarone, indene or coumarone-indene: other
- 3911 20 00 00Petroleum resins, coumarone-indene resins, polyterpenes: poly(1.3-phenylene methylphosphonate)
- 3911 90 11 10Poly(oxy-1.4-phenylenesulphonyl-1.4-phenyleneoxy-1.4-phenyleneisopropylidene-1.4-phenylene) (cas rn 25135-51-7 and cas rn 25154-01-2), in one of the forms mentioned in note 6(b) to this chapter containing by weight not more than 20% of additives
- 3911 90 11 90Poly(oxy-1.4-phenylenesulphonyl-1.4-phenyleneoxy-1.4-phenyle: other
- 3911 90 13 00Condensation or rearrangement polymerisation products: poly(thio-1.4-phenylene)
- 3911 90 19 15Polyetherimide of - 5.5′-[(isopropylidene)bis(4.1-phenylene)dioxy]bis(1.3-isobenzofurandione) and 1.3-benzenediamine whether or not as a copolymer with 3-aminopropyl terminated dimethylsilicones (cas rn 61128-46-9 or 99904-16-2), or - 5.5′-[(isopropylidene)bis(4.1-phenylene)dioxy]bis(1.3-isobenzofurandione) and 1.4-benzenediamine (cas rn 61128-47-0), or - 4.4′-[(isopropylidene)bis(4.1-phenylene)dioxy]bis(1.3-isobenzofurandione), 5.5′-[(isopropylidene)bis(4.1-phenylene)dioxy]bis(1.3-isobenzofurandione), 4.5′-[(isopropylidene)bis(4.1-phenylene)dioxy]bis(1.3-isobenzofurandione), pyromellitic dianhydride, 1.2-benzenediamine, 1.3-benzenediamine and 1.4-benzenediamine with phthalic anhydride endcaps (cas rn 96557-46-9)
- 3911 90 19 25Polyamideimide of -4-chloroformylphthalic anhydride and 4.4′-methylenedianiline (cas rn 35463-82-2), or -4-chloroformyphthalic anhydride, 4.4′-oxydianiline and 1.3-phenylenediamine (cas rn 25928-85-2), containing by weight not more than 35% of additives
- 3911 90 19 30Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide
- 3911 90 19 35Poly(oxy-1.4-phenylenesulfonyl-1.4-phenyleneoxy-4.4’-biphenylene) (cas rns 25608-64-4 and 25839-81-0) containing by weight not more than 20% of additives
- 3911 90 19 40M- xylene formaldehyde resin
- 3911 90 19 80Poly(oxy-1.4-phenylenesulfonyl-1.4-phenylene) (cas rn 25608-63-3 and cas rn 25667-42-9) containing by weight not more than 20% of additives
- 3911 90 19 90Condensation or rearrangement polymerisation products: other, other
- 3911 90 92 00Copolymer of p-cresol and divinylbenzene, in the form of a solution in n,n-dimethylacetamide containing by weight 50% or more of polymer; hydrogenated copolymers of vinyltoluene and α-methylstyrene
- 3911 90 99 10For cavity filling, for use in certain types of aircraft
- 3911 90 99 23Aqueous solution consisting of by weight 25% or more, but not more than 40% of a poly(isobutylene-maleic anhydride) modified with: -n,n-dimethylpropane-1.3-diamine, -a copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups, -ethanol (cas rn 497926-97-3)
- 3911 90 99 25Copolymer of vinyltoluene and α-methylstyrene
- 3911 90 99 35Alternated copolymer of ethylene and maleic anhydride (ema)
- 3911 90 99 38Mixture containing by weight: -90% (± 1%) of 1.4:5.8- dimethanonaphthalene, 2-ethylidene-1.2,3.4,4a,5.8,8a-octahydro-,polymer with 3a,4.7,7a- tetrahydro- 4.7-methano-1h-indene, hydrogenated (cas rn 881025-72-5), and -10% (± 1%) of a hydrogenated styrene butadiene copolymer (cas rn 66070-58-4)
- 3911 90 99 40Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9% or more but not more than 16% by weight
- 3911 90 99 43Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 ºc
- 3911 90 99 45Copolymer of maleic acid and methyl vinyl ether
- 3911 90 99 48Mixture containing by weight: -90% (± 1%) of 1.4:5.8- dimethanonaphthalene, 2-ethylidene-1.2,3.4,4a,5.8,8a-octahydro-,polymer with 3a,4.7,7a- tetrahydro- 4.7-methano-1h-indene, hydrogenated (cas rn 881025-72-5), and -10% (± 1%) of an ethylene-propylene copolymer (cas rn 9010-79-1)
- 3911 90 99 60Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, in flake or powder form
- 3911 90 99 63Mixture, containing by weight: - 20% or more but not more than 40% of a copolymer of methyl vinyl ether and monobutyl maleate (cas rn 25119-68-0), - 7% or more but not more than 20% of a copolymer of methyl vinyl ether and monoethyl maleate (cas rn 25087-06-3), - 40% or more, but not more than 65% of ethanol (cas rn 64-17-5), - 1% or more but not more than 7% of butan-1-ol (cas rn 71-36-3)
- 3911 90 99 65Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether
- 3911 90 99 70Aqueous solution containing by weight: - 30% or more but not more than 40% of poly-4-vinylpyridine-n-oxide, - 0.1% or more but not more than 4% of isonicotinic acid-n-oxide, - 0.1% or more but not more than 3.5% of sodium sulphate, - 0.1% or more but not more than 2% of 4-acetylpyridine-n-oxide
- 3911 90 99 73A mixture containing by weight: -89% or more but not more than 91% of 1.4:5.8-dimethanonaphthalene, 2-ethylidene-1.2,3.4,4a,5.8,8a-octahydro-, polymer with 3a,4.7,7a-tetrahydro-4.7-methano-1h-indene, hydrogenated (cas rn 881025-72-5), and -9% or more but not more than 11% of polypropylene homopolymer (cas rn 9003-07-0)
- 3911 90 99 86Copolymer of methyl vinyl ether and maleic acid anhydride (cas rn 9011-16-9)
- 3911 90 99 90Petroleum resins, coumarone-indene resins, polyterpenes: other, other, other, other, other
3912 Cellulose og kemiske derivater deraf, ikke andetsteds tariferet, i ubearbejdet form
- 3912 11 00 20Cellulose and its chemical derivatives, not elsewhere: cellulose acetates, non-plasticised, cellulose acetate flakes
- 3912 11 00 30Cellulose triacetate (cas rn 9012-09-3)
- 3912 11 00 40Cellulose and its chemical derivatives, not elsewhere: cellulose acetates, non-plasticised, cellulose diacetate powder
- 3912 11 00 90Cellulose and its chemical derivatives, not elsewhere: cellulose acetates, non-plasticised, other
- 3912 12 00 00Cellulose and its chemical derivatives, not elsewhere: cellulose acetates, plasticised
- 3912 20 11 00Cellulose nitrates (including collodions): non-plasticised, collodions and celloidin
- 3912 20 19 00Cellulose nitrates (including collodions): non-plasticised, other
- 3912 20 90 00Cellulose nitrates (including collodions): plasticised
- 3912 31 00 00Carboxymethylcellulose and its salts
- 3912 39 20 00Cellulose and its chemical derivatives, not elsewhere: cellulose ethers, other, hydroxypropylcellulose
- 3912 39 85 10Cellulose and its chemical derivatives, not elsewhere: cellulose ethers, other, other, ethylcellulose, not plasticised
- 3912 39 85 20Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose
- 3912 39 85 30Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms
- 3912 39 85 50Polyquaternium 10 (cas rn 68610-92-4)
- 3912 39 85 60Hypromellose (inn) (cas rn 9004-65-3), for use in the manufacturing of food supplements or pharmaceuticals
- 3912 39 85 90Cellulose and its chemical derivatives, not elsewhere: cellulose ethers, other, other, other
- 3912 90 10 20Cellulose and its chemical derivatives, not elsewhere: other, cellulose esters, hydroxypropyl methylcellulose phthalate
- 3912 90 10 90Cellulose and its chemical derivatives, not elsewhere: other, cellulose esters, other
- 3912 90 90 00Cellulose and its chemical derivatives, not elsewhere: other, other
3913 Naturlige polymerer (fx alginsyre) og modificerede naturlige polymerer (fx hærdede proteiner, kemiske derivater af naturgummi), ikke andetsteds tariferet, i ubearbejdet form
- 3913 10 00 20Sodium alginate extracted from brown seaweed, with - a loss on drying of not more than 15% by weight (4h at 105 °c), - a water-insoluble fraction of not more than 2% by weight, calculated on the dry weight
- 3913 10 00 90Alginic acid, its salts and esters: other
- 3913 90 00 20Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)
- 3913 90 00 40Natural polymers: other, xanthan gum
- 3913 90 00 85Sterile sodium hyaluronate (cas rn 9067-32-7)
- 3913 90 00 87With: - a weight average molecular weight (mw) of not more than 900 000, - an endotoxin level of not more than 0.008 endotoxin units (eu)/mg, - an ethanol content of not more than 1% by weight, - an isopropanol content of not more than 0.5% by weight
- 3913 90 00 88Natural polymers: other, sodium hyaluronate, non sterile, other
- 3913 90 00 95Chondroitinsulphuric acid, sodium salt (cas rn 9082-07-9)
- 3913 90 00 99Natural polymers: other, other
3914 Ionbyttere på basis af polymerer henhørende under pos. 3901-3913, i ubearbejdet form
- 3914 00 00 10Aqueous suspension, containing by weight -20% or more but not more than 30% of beaded agarose, modified with nitrilotriacetic acid and loaded with divalent nickel ions (cas rn 1615227-97-8), and -20% or more but not more than 30% of ethanol (cas rn 64-17-5)
- 3914 00 00 90Ion-exchangers based on polymers of headings 3901 to 3913: other
3915 Affald, afklip og skrot, af plast
- 3915 10 10 00Having a specific gravity of less than 0.94 (for example, pe-ld)
- 3915 10 20 00Having a specific gravity of 0.94 or more (for example, pe-hd)
- 3915 20 00 00Of polymers of styrene
- 3915 30 00 00Of polymers of vinyl chloride
- 3915 90 11 00Of polymers of propylene
- 3915 90 20 00Of polymers of ethylene terephthalate (for example, pet)
- 3915 90 70 00Waste, parings and scrap, of plastics: of other plastics, other
3916 Monofilamenter, hvis største tværmål overstiger 1 mm, stænger og profiler, også overfladebehandlede, men ikke på anden måde bearbejdet, af plast
- 3916 10 00 10For use in certain types of aircraft
- 3916 10 00 90Of polymers of ethylene: other
- 3916 20 00 10For use in certain types of aircraft
- 3916 20 00 99Of polymers of vinyl chloride: other
- 3916 90 10 10Rods with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7% or more but not more than 9% of polytetrafluorethylene if present - 10% or more but not more than 25% of inorganic fillers
- 3916 90 10 90Of condensation or rearrangement polymerisation products: other
- 3916 90 50 10For use in certain types of aircraft
- 3916 90 50 90Of addition polymerisation products: other
- 3916 90 90 00Monofilament of which any cross-sectional dimension exceeds: of other plastics, other
3917 Rør og slanger samt fittings dertil (fx muffer, rørknæ, forbindelsesstykker), af plast
- 3917 10 10 00Artificial guts: of hardened protein
- 3917 10 90 00Artificial guts: of cellulosic materials
- 3917 21 10 10For use in certain types of aircraft
- 3917 21 10 90Seamless and of a length exceeding the maximum: other
- 3917 21 90 10With fittings attached, for use in civil aircraft
- 3917 21 90 20For use in certain types of aircraft
- 3917 21 90 90Of polymers of ethylene: other, other
- 3917 22 10 10For use in certain types of aircraft
- 3917 22 10 90Seamless and of a length exceeding the maximum: other
- 3917 22 90 10With fittings attached, for use in civil aircraft
- 3917 22 90 20For use in certain types of aircraft
- 3917 22 90 90Of polymers of propylene: other, other
- 3917 23 10 10For use in certain types of aircraft
- 3917 23 10 90Seamless and of a length exceeding the maximum: other
- 3917 23 90 10With fittings attached, for use in civil aircraft
- 3917 23 90 20For use in certain types of aircraft
- 3917 23 90 90Of polymers of vinyl chloride: other, other
- 3917 29 00 11For use in certain types of aircraft
- 3917 29 00 19Of addition polymerisation products: other
- 3917 29 00 91With fittings attached, for use in civil aircraft
- 3917 29 00 99Tubes, pipes and hoses, rigid: of other plastics, other, other
- 3917 31 00 10With fittings attached, for use in civil aircraft
- 3917 31 00 20For use in certain types of aircraft
- 3917 31 00 30Tubings: -with an outer diameter of 0.33 mm or more but not more than 3.3 mm, -with an inner diameter of 0.01 mm or more but not more than 2.1 mm, -suitable for a maximum working pressure rate from 2.7 mpa up to 70 mpa, -suitable for all solutions used in chromatography, -whether or not with fused silica, -whether or not covered with peek, for use in chromatographic system
- 3917 31 00 90Flexible tubes, pipes and hoses, having a minimum burst: other
- 3917 32 00 10For use in certain types of aircraft
- 3917 32 00 20Tubings: -with an outer diameter of 0.33 mm or more but not more than 3.3 mm, -with an inner diameter of 0.01 mm or more but not more than 2.1 mm, -suitable for a maximum working pressure rate from 2.7 mpa up to 70 mpa, -suitable for all solutions used in chromatography, -whether or not with fused silica, -whether or not covered with peek, for use in chromatographic system
- 3917 32 00 30Heat shrinkable tube: -containing by weight 80% or more polymer, -with an insulation resistance of 90 mw or more, -with a dielectric strength of 35 kv / mm or more, -with a wall thickness of 0.04 mm or more, but not more than 0.9 mm, -with a lay-flat width of 18 mm or more, but not more than 156 mm, for use in the manufacture of aluminium electrolytic capacitors
- 3917 32 00 90Other, not reinforced or otherwise combined with other: other
- 3917 33 00 10With fittings attached, for use in civil aircraft
- 3917 33 00 90Other, not reinforced or otherwise combined with other: other
- 3917 39 00 10With fittings attached, for use in civil aircraft
- 3917 39 00 20Tubings: -with an outer diameter of 0.33 mm or more but not more than 3.3 mm, -with an inner diameter of 0.01 mm or more but not more than 2.1 mm, -suitable for a maximum working pressure rate from 2.7 mpa up to 70 mpa, -suitable for all solutions used in chromatography, -whether or not with fused silica, -whether or not covered with peek, for use in chromatographic system
- 3917 39 00 91For use in certain types of aircraft
- 3917 39 00 99Other tubes, pipes and hoses: other, other, other
- 3917 40 00 10For use in civil aircraft
- 3917 40 00 20Plastic fittings (kit of nuts and ferrules or nuts) and connectors: -threaded, -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2.7 mpa or more but not more than 114 mpa, for tubings with: -outer diameter of 0.33 mm or more but not more than 3.3 mm, -suitable for a maximum working pressure rate of 2.7 mpa or more but not more than 114 mpa, -suitable for all solutions used in chromatography, for use in the production of chromatographic systems
- 3917 40 00 91Plastic connectors containing o-rings, a retainer clip and a release system for insertion into car fuel hoses
- 3917 40 00 99Tubes, pipes and hoses, and fittings therefor: fittings, other, other
3918 Gulvbelægningsmaterialer af plast, også selvklæbende, i ruller eller som fliser; væg- eller loftsbeklædning af plast som defineret i bestemmelse 9 til dette kapitel
- 3918 10 10 10For use in certain types of aircraft
- 3918 10 10 90Consisting of a support impregnated, coated or covered with: other
- 3918 10 90 10For use in certain types of aircraft
- 3918 10 90 90Of polymers of vinyl chloride: other, other
- 3918 90 00 10For use in certain types of aircraft
- 3918 90 00 90Floor coverings of plastics, whether or not self-adhesive: of other plastics, other
3919 Plader, ark, film, folier, bånd, tape, strimler og andre flade former, af plast, selvklæbende, også i ruller
- 3919 10 12 00Of poly(vinyl chloride) or of polyethylene
- 3919 10 15 00Strips, the coating of which consists of unvulcanised: of polypropylene
- 3919 10 19 10Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
- 3919 10 19 90Strips, the coating of which consists of unvulcanised: other, other
- 3919 10 80 10For use in certain types of aircraft
- 3919 10 80 25Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
- 3919 10 80 27Polyester film: - coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °c or more but not more than 200 °c, and a polyester liner, and - on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °c or more but not more than 200 °c, and a polyester liner
- 3919 10 80 35Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
- 3919 10 80 45Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0.38 mm or more but not more than 1.53 mm
- 3919 10 80 55Acrylic foam tape: - covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive, - covered on the other side with an acrylic pressure sensitive adhesive, - covered on one or both sides with a release sheet, - with a peel adhesion of more than 25 n/cm (at an angle of 90° as determined by the astm d 3330 method)
- 3919 10 80 57Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesive layer and a release sheet
- 3919 10 80 63Reflecting film consisting of - a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, - a layer of an acrylic resin having embedded glass beads, - a layer of an acrylic resin hardened by a melamine cross-linking agent, - a metal layer, - an acrylic adhesive, and - a release film
- 3919 10 80 73Self-adhesive reflecting sheet whether or not in segmented pieces, - whether or not containing a watermark, - with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: - a layer of acrylic or vinyl polymer, - a layer of poly(methyl methacrylate) or polycarbonate containing microprisms, - a layer of metallisation, - an adhesive layer, and - a release sheet - whether or not containing an additional layer of polyester
- 3919 10 80 75Self adhesive reflecting film, consisting of several layers including: - a copolymer of acrylic resin, - polyurethane, - a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, - glass microspheres, and - an adhesive layer, with a release liner on one or both sides
- 3919 10 80 78Polytetrafluoroethylene film, -with a thickness of 50 µm or more, -with a width of 6.30 mm or more but not more than 740 mm, -an elongation at break of not more than 200%, and -coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm
- 3919 10 80 90In rolls of a width not exceeding 20 cm: other, other, other
- 3919 90 20 00Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers
- 3919 90 80 10For use in certain types of aircraft
- 3919 90 80 20Polyester film: - coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °c or more but not more than 200 °c, and a polyester liner, and - on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °c or more but not more than 200 °c, and a polyester liner
- 3919 90 80 23Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner
- 3919 90 80 24Reflecting laminated sheet: - consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, - covered on both sides with one or more layers of plastic material and - covered on one side with an adhesive layer and a release sheet
- 3919 90 80 30Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesive layer and a release sheet
- 3919 90 80 31Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
- 3919 90 80 33Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm
- 3919 90 80 45Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0.38 mm or more but not more than 1.53 mm
- 3919 90 80 48Polytetrafluoroethylene film, -with a thickness of 50 µm or more, -with a width of 6.30 mm or more but not more than 740 mm, -an elongation at break of not more than 200%, and -coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm
- 3919 90 80 49Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet
- 3919 90 80 50Self-adhesive reflecting sheet whether or not in segmented pieces, - whether or not containing a watermark, - with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: - a layer of acrylic or vinyl polymer, - a layer of poly(methyl methacrylate) or polycarbonate containing microprisms, - a layer of metallisation, - an adhesive layer, and - a release sheet - whether or not containing an additional layer of polyester
- 3919 90 80 53Acrylic foam tape: - covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive, - covered on the other side with an acrylic pressure sensitive adhesive, - covered on one or both sides with a release sheet, - with a peel adhesion of more than 25 n/cm (at an angle of 90° as determined by the astm d 3330 method)
- 3919 90 80 54Poly(vinyl chloride) film, on one side covered with - a polymer layer - an adhesive layer - a release liner, on one side embossed, containing oblate spheres; whether or not on the other side covered with an adhesive layer and a metallised polymer layer
- 3919 90 80 55Black polyvinyl chloride film: -with a gloss of more than 25 degrees according to astm d 2457, -whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner for use in the manufacture of die-cut films for interior and exterior surfaces of cars
- 3919 90 80 56Transparent polyethylene film coated on one side with an aqueous acrylic adhesive, of a thickness of 30 μm to 50 μm, put up in rolls of a width of 52 cm or more but not more than 154 cm
- 3919 90 80 57Self-adhesive polycarbonate film, printed, whether or not arched, with: -a thickness of 0.3 mm or more, but not more than 0.4 mm, -minimum dimensions of 63 mm x 15 mm, -maximum dimensions of 278 mm x 117 mm, -a weight of not more than 5 g per piece, intended for integration into combined instrument panels of passenger cars
- 3919 90 80 58Biaxially-oriented film of poly(methyl methacrylate), with a thickness of 20 μm or more but not more than 90 μm, covered on one side with an adhesive layer and a release sheet
- 3919 90 80 65Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner
- 3919 90 80 70Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad
- 3919 90 80 80Self adhesive reflecting film, consisting of several layers including: - a copolymer of acrylic resin, - polyurethane, - a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, - glass microspheres, and - an adhesive layer, with a release liner on one or both sides
- 3919 90 80 82Reflecting film consisting of: - a polyurethane layer, - a glass microspheres layer, - a metallised aluminium layer, and - an adhesive, covered on one or both sides with a release liner, - whether or not a poly(vinyl chloride) layer, - a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use
- 3919 90 80 83Reflector or diffuser sheets, in rolls, -for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or -for equal transmission and distribution of light, intended for lcd modules
- 3919 90 80 99Self-adhesive plates, sheets, film, foil, tape, strip: other, other, other, other
3920 Andre plader, ark, film, folier, bånd og strimler, af plast undtagen celleplast, uden underlag og ikke forstærket, lamineret eller på lignende måde i forbindelse med andre materialer
- 3920 10 23 00Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
- 3920 10 24 10For use in certain types of aircraft
- 3920 10 24 90Stretch film, not printed: other
- 3920 10 25 05For use in certain types of aircraft
- 3920 10 25 90Of polyethylene having a specific gravity of: less than 0.94, other, other
- 3920 10 28 10For use in certain types of aircraft
- 3920 10 28 99Of polyethylene having a specific gravity of: 0.94 or more, other
- 3920 10 40 10For use in certain types of aircraft
- 3920 10 40 99Of a thickness not exceeding 0.125 mm: other, other
- 3920 10 81 00Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15%, containing poly(vinyl alcohol) dissolved in water as the moistening agent
- 3920 10 89 10For use in certain types of aircraft
- 3920 10 89 40Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8 mm or more but not exceeding 1.2 mm
- 3920 10 89 90Of a thickness exceeding 0.125 mm: other, other, other
- 3920 20 21 10For use in certain types of aircraft
- 3920 20 21 50Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron
- 3920 20 21 90Of a thickness not exceeding 0.10 mm: biaxially oriented, other
- 3920 20 29 10For use in certain types of aircraft
- 3920 20 29 70Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: - a thickness of 55 µm or more but not more than 97 µm, - a tensile modulus in the machine direction of 0.30 gpa or more but not more than 1.45 gpa, and - a tensile modulus in the transverse direction of 0.20 gpa or more but not more than 0.70 gpa
- 3920 20 29 94Mono-axial oriented, co-extruded film: -consisting of 3 to 5 layers, -each layer mainly consisting of polypropylene and/or polyethylene, -each layer containing not more than 10% by weight of other polymers, -whether or not containing titanium dioxide in the core layer, -of an overall thickness of not more than 75 μm
- 3920 20 29 99Of a thickness not exceeding 0.10 mm: other, other, other
- 3920 20 80 10For use in certain types of aircraft
- 3920 20 80 90Of a thickness exceeding 0.10 mm: other
- 3920 30 00 10Acrylonitrile-butadiene-styrene, for use in certain types of aircraft
- 3920 30 00 30Opaque layer, whether or not printed, biaxially oriented, high impact polystyrene foil in rolls with: -a thickness of 0.229 mm or more but not more than 0.279 mm, -an titanium dioxide content by weight of 3% or more but not more than 3.5%, -on one side a highly hydrophobic, chemically neutral and non-reactive coating
- 3920 30 00 90Of polymers of styrene: other
- 3920 43 10 10For use in certain types of aircraft
- 3920 43 10 92Sheeting of poly(vinyl chloride), stabilised against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 µm or more but not more than 80 µm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride)
- 3920 43 10 95Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet
- 3920 43 10 99Of a thickness not exceeding 1 mm: other, other
- 3920 43 90 10For use in certain types of aircraft
- 3920 43 90 90Of a thickness exceeding 1 mm: other
- 3920 49 10 10For use in certain types of aircraft
- 3920 49 10 30Film of a (polyvinyl)chloride-copolymer - containing by weight 45% or more of fillers - on a support
- 3920 49 10 99Of a thickness not exceeding 1 mm: other, other
- 3920 49 90 10For use in certain types of aircraft
- 3920 49 90 90Of a thickness exceeding 1 mm: other
- 3920 51 00 20Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3.5 mm or more but not more than 19 mm
- 3920 51 00 30Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 125μm
- 3920 51 00 40Sheets of polymethylmethacrylate conforming to standard en 4366 (mil-prf-25690)
- 3920 51 00 50Sheets of polymethylmethacrylate conforming to standard — en 4364 (mil-p-5425e) and dtd5592a, or — en 4365 (mil-p-8184) and dtd5592a
- 3920 51 00 90Other plates, sheets, film, foil and strip, of plastics: of acrylic polymers, of poly(methyl methacrylate), other
- 3920 59 10 00Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometres
- 3920 59 90 00Other plates, sheets, film, foil and strip, of plastics: of acrylic polymers, other, other
- 3920 61 00 30Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesive layer and a release sheet
- 3920 61 00 40Extruded thermoplastic foils or films of polycarbonate with: -matt surface texture on both sides -a thickness of more than 50 μm but not more than 200 μm, -a width of 800 mm or more, but not more than 1 500 mm, and -a length of 300 m or more, but not more 2500 m for use in the production of retroreflective products
- 3920 61 00 50Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a: -total thickness of more than 230 μm but not more than 270 μm, -top layer thickness of more than 40 μm but not more than 55 μm, -defined surface roughness of the top layer of 0.5 μm or less (according to iso 4287), -uv-stabilised top layer
- 3920 61 00 90Of polycarbonates, alkyd resins, polyallyl esters or other: of polycarbonates, other
- 3920 62 12 00Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates
- 3920 62 19 05Poly(ethylene terephthalate) film in rolls: - with a thickness of 0.335 mm or more but not more than 0.365 mm, and - coated with a gold layer with a thickness of 0.03 μm or more but not more than 0.06 μm
- 3920 62 19 08Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: - only dyed in the mass, or - dyed in the mass and metallised on one side
- 3920 62 19 28Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 n/cm or more (astm d-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites
- 3920 62 19 32Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 dyne/cm or more but not more than 39 dyne/cm, or transparent 3 or 4 layers, second layer of pet, and other layers contain fluorine resin, -with a light transmittance of more than 70%, -with a haze value of not more than 1.3%, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm
- 3920 62 19 38Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm
- 3920 62 19 48Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 μm (± 3 μm)
- 3920 62 19 52Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0.1% of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the astm d 257 method)
- 3920 62 19 60Poly (ethylene terephtalate) film: - of a thickness of not more than 20 µm, - coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm
- 3920 62 19 70Poly(ethylene terephthalate) film in rolls with: -a thickness of 35 μm or more, but not more than 75 μm, -a tensile strength of 40 mpa or more in the machine direction (md) and 200 mpa or more in the transverse direction (td), -an elongation at break of 400% or more in md and 30% or more in td, -a heat shrinkage (in water at 90 °c/10s) in md of 0.49% or more, but not more than 0.51%, -a dynamic heat shrinkage (between 55 °c and 70 °c) in td of not more than 20 percentage points, -a light transmittance of 85% or more, -a haze ratio of not more than 6%, -a surface tension of 38 mn/m or more, -a density of 1.30 g/cm³ or more, but not more than 1.34 g/cm³, -a shelf life declared by the manufacturer of not less than 12 months
- 3920 62 19 79Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm
- 3920 62 19 85Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (fcc) (eva) layer, a 275 µm polyethylene terephthalate (pet) layer and a 25 µm fluorinated polymer (fcc) layer with: -a total thickness of 300 µm or more, but not more than 330 µm, -a tensile strength of 375 n/cm or more in both the longitudinal and transverse directions (astm d-882), -a low thermal shrinkage of 1% or less at 150 °c for 30 minutes, -a low water vapor permeability of 2.5 g/m²•d or less, and -a high breakdown voltage of 18 kv or more and -a partial discharge voltage of 1500 vdc or more (bg/t 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules
- 3920 62 19 99Of a thickness not exceeding 0.35 mm: other, other
- 3920 62 90 10Poly(ethylene terephthalate) film in rolls: - with a thickness of 0.335 mm or more but not more than 0.365 mm, and - coated with a gold layer with a thickness of 0.03 μm or more but not more than 0.06 μm
- 3920 62 90 90Of a thickness exceeding 0.35 mm: other
- 3920 63 00 00Of polycarbonates, alkyd resins, polyallyl esters or other: of unsaturated polyesters
- 3920 69 00 20Film of poly(ethylene naphthalene-2.6-dicarboxylate)
- 3920 69 00 30Mono- or multilayer, transverse oriented, shrink film: -composed of more than 85% by weight of polylactic acid, not more than 5% by weight of inorganic or organic additives and not more than 10% by weight of additives based on biodegradable polyesters, -with a thickness of 20 μm or more but not more than 100 μm, -with a length of 2 385 m or more but not more than 9 075 m, -biodegradable and compostable (as determined by the method en 13432)
- 3920 69 00 70Mono- or multilayer, biaxially oriented film: -composed of more than 85% by weight of polylactic acid, not more than 5% by weight of inorganic or organic additives, and not more than 10% by weight of additives based on biodegradable polyesters, -with a thickness of 9 mm or more but not more than 120 mm, -with a length of 1 395 m or more but not more than 21 560 m, -biodegradable and compostable (as determined by the method en 13432)
- 3920 69 00 90Of polycarbonates, alkyd resins, polyallyl esters or other: of other polyesters, other
- 3920 71 00 00Of cellulose or its chemical derivatives: of regenerated cellulose
- 3920 73 10 00Film in rolls or in strips, for cinematography or photography
- 3920 73 80 00Of cellulose or its chemical derivatives: of cellulose acetate, other
- 3920 79 10 00Of other cellulose derivatives: of vulcanised fibre
- 3920 79 90 00Of other cellulose derivatives: other
- 3920 91 00 10For use in certain types of aircraft
- 3920 91 00 52Poly(vinyl butyral) film: - containing by weight 26% or more but not more than 30% of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser, - with a thickness of 0.73 mm or more but not more than 1.50 mm
- 3920 91 00 91Poly(vinyl butyral) film having a graduated coloured band
- 3920 91 00 93Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: - a visible light transmission of 50% or more, - coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), - a total thickness of not more than 0.2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0.2 mm
- 3920 91 00 95Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29% or more but not more than 31% of 2.2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser
- 3920 91 00 97Co-extruded trilayer poly(vinyl butyral) film: other
- 3920 91 00 99Other plates, sheets, film, foil and strip, of plastics: of other plastics, of poly(vinyl butyral), other, other
- 3920 92 00 00Other plates, sheets, film, foil and strip, of plastics: of other plastics, of polyamides
- 3920 93 00 00Other plates, sheets, film, foil and strip, of plastics: of other plastics, of amino-resins
- 3920 94 00 00Other plates, sheets, film, foil and strip, of plastics: of other plastics, of phenolic resins
- 3920 99 21 00Polyimide foil and strip, uncoated, or coated or covered solely with plastic
- 3920 99 28 40Polymer film containing the following monomers: - poly (tetramethylene ether glycol), - bis (4-isocyanotocyclohexyl) methane, - 1.4-butanediol or 1.3-butanediol, - with a thickness of 0.25 mm or more but not more than 5.0 mm, - embossed with a regular pattern on one surface, - and covered with a release sheet
- 3920 99 28 50Thermoplastic polyurethane film (tpu) based on an aliphatic polycaprolactone (pcl), transparently backed on one side with a removable protective film (pet film), with a light transmission of more than 93% (according to din en iso 13468-1), with a thickness of 25μm or more but not more than 500μm
- 3920 99 28 65Matt, thermoplastic polyurethane foil in rolls with: - a width of 1640 mm (± 10 mm), - a gloss of 3.3 degrees or more but not more than 3.8 (as determined by the method astm d2457), - a surface roughness of 1.9 ra or more but not more than 2.8 ra (as determined by the method iso 4287), - a thickness of more than 365 µm but not more than 760 µm, - a hardness of 90 (± 4) (as determined by the method: shore a (astm d2240)), - an elongation to break of 470% (as determined by the method: en iso 527)
- 3920 99 28 70Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: - microspheres with a coating of metal, whether or not alloyed with gold, - an adhesive layer, - with a protective layer of silicone or poly(ethylene terephthalate) on one side, - with a protective layer of poly(ethylene terephthalate) on the other side, and - with a width of 5 cm or more but not more than 100 cm - with a length of not more than 2 000 m
- 3920 99 28 90Of condensation or rearrangement polymerisation products: other, other
- 3920 99 52 00Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97% or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm
- 3920 99 53 00Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells
- 3920 99 59 10For use in certain types of aircraft
- 3920 99 59 25Of addition polymerisation products: other, other, poly(1-chlorotrifluoroethylene) film
- 3920 99 59 65Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or more but not more than 90 µm, a tensile strength at break of 20 mpa or more but not more than 55 mpa and an elongation at break of 250% or more but not more than 900%
- 3920 99 59 90Of addition polymerisation products: other, other, other
- 3920 99 90 00Other plates, sheets, film, foil and strip, of plastics: of other plastics, of other plastics, other
3921 Andre plader, ark, film, folier, bånd og strimler, af plast
- 3921 11 00 10Acrylonitrile butadiene styrene, for use in certain types of aircraft
- 3921 11 00 90Of polymers of styrene: other
- 3921 12 00 20For use in certain types of aircraft
- 3921 12 00 90Of polymers of vinyl chloride: other
- 3921 13 10 00Other plates, sheets, film, foil and strip, of plastics: cellular, of polyurethanes, flexible
- 3921 13 90 00Other plates, sheets, film, foil and strip, of plastics: cellular, of polyurethanes, other
- 3921 14 00 20Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)
- 3921 14 00 80Other plates, sheets, film, foil and strip, of plastics: cellular, of regenerated cellulose, other
- 3921 19 00 10For use in certain types of aircraft
- 3921 19 00 30Blocks with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7% or more but not more than 9% of polytetrafluorethylene if present - 10% or more but not more than 25% of inorganic fillers
- 3921 19 00 50Porous membrane of polytetrafluorethylene (ptfe) laminated to a polyester spunbonded non-woven cloth with - a total thickness of more than 0.05 mm but not more than 0.20 mm, - a water entry pressure between 5 and 200 kpa according to iso 811, and - an air permeability of 0.08 cm3/cm2/s or more according to iso 5636-5
- 3921 19 00 53Sheets of closed-cell silicone foam with: -a thickness of 2.0 mm or more but not more than 4.8 mm, -a thermal insulation of more than 0.25 km²/w but not more than 0.4 km²/w (according to astm-c518) -a dielectric strength of more than 3.0 kv/mm but not more than 3.8 kv/mm (according to astm- d149)
- 3921 19 00 55Strip of microporous polytetrafluoroethylene on a support of a non-woven -wound on a roll on a core of 3 inches, -with a width of 69.5mm, 40.8mm, 36.5mm, 20mm, 13.5mm or 10mm for use in the manufacture of filters for kidney dialysis equipment and intravenous application
- 3921 19 00 65Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the manufacture of alkaline battery separators with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 μm or more but not more than 36 μm,
- 3921 19 00 75Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (td) shrinkage, -a total thickness of 8 μm or more, but not more than 40 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0.02 μm and 0.1 μm, -whether or not laminated with a polypropylene non-woven mat of 50 to 200 µm thickness, -whether or not coated with surfactant, -whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, -whether or not coated on 1 or 2 sides with a sticky binder, pvdf type or similar of min 0.5 μm thickness or more, but not more than 5 μm
- 3921 19 00 95Film of polyethersulfone, of a thickness of not more than 200 µm
- 3921 19 00 99Other plates, sheets, film, foil and strip, of plastics: cellular, of other plastics, other, other
- 3921 90 10 05Corrugated sheet and plates
- 3921 90 10 10Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres
- 3921 90 10 30Multilayer film consisting of: - a poly(ethylene terephthalate) film with a thickness of more than 100 µm but not more than 150 µm, - a primer of phenolic material with a thickness of more than 8 µm but not more than 15 µm, - an adhesive layer of a synthetic rubber with a thickness of more than 20 µm but not more than 30 µm, - and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 µm but not more than 40 µm
- 3921 90 10 90Of condensation or rearrangement polymerisation products: of polyesters, other
- 3921 90 30 00Of condensation or rearrangement polymerisation products: of phenolic resins
- 3921 90 41 00High-pressure laminates with a decorative surface on one or both sides
- 3921 90 43 00Of condensation or rearrangement polymerisation products: of amino-resins, laminated, other
- 3921 90 49 00Of condensation or rearrangement polymerisation products: of amino-resins, other
- 3921 90 55 25Prepreg sheets or rolls containing polyimide resin
- 3921 90 55 35Glass fibre impregnated with epoxy resin for use in the manufacture of smart cards
- 3921 90 55 40Three layered fabric sheet, in rolls, - comprising a core layer of 100% nylon taffeta or nylon/polyester blended taffeta, - coated on both sides with polyamide , - of a total thickness not more than 135 μm, - of a total weight not more than 80 g/m2
- 3921 90 55 70Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with: -a total thickness of 0.25 mm or more but not more than 0.40 mm, -a total weight of 109 g/m² or more but not more than 114 g/m²
- 3921 90 55 90Of condensation or rearrangement polymerisation products: other, other
- 3921 90 60 10For use in certain types of aircraft
- 3921 90 60 90Of addition polymerisation products: other
- 3921 90 90 00Other plates, sheets, film, foil and strip, of plastics: other, other
3922 Badekar, brusekar, køkkenvaske, håndvaske, bideter, klosetter samt sæder og låg dertil, skyllecisterner og lignende sanitetsartikler, af plast
3923 Transport- og emballagegenstande, af plast; propper, låg, kapsler og andre lukkeanordninger, af plast
- 3923 10 10 00Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticles
- 3923 10 90 10Photomask or wafer compacts: - consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (esd) and outgassing properties, - having non porous, abrasion resistant or impact resistant surface properties, - fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and - with or without a gasket seal, of a kind used in the photolithography or other semiconductor production to house photomasks or wafers
- 3923 10 90 90Boxes, cases, crates and similar articles: other, other
- 3923 21 00 00Of polymers of ethylene
- 3923 29 10 00Sacks and bags (including cones): of other plastics, of poly(vinyl chloride)
- 3923 29 90 00Sacks and bags (including cones): of other plastics, other
- 3923 30 10 00Of a capacity not exceeding two litres
- 3923 30 90 00Of a capacity exceeding two litres
- 3923 40 10 00Spools, reels and similar supports for photographic and cinematographic film or for tapes, films and the like of heading 8523
- 3923 40 90 00Spools, cops, bobbins and similar supports: other
- 3923 50 10 00Caps and capsules for bottles
- 3923 50 90 00Stoppers, lids, caps and other closures: other
- 3923 90 00 00Articles for the conveyance or packing of goods, of plastics: other
3924 Bordservice, køkkenartikler og andre husholdningsartikler samt hygiejniske artikler og toiletartikler, af plast
- 3924 10 00 11Kitchenware containing polyamide or melamine: consigned from China or Hong Kong
- 3924 10 00 19Kitchenware containing polyamide or melamine: other
- 3924 10 00 90Tableware, kitchenware, other household articles: tableware and kitchenware, other
- 3924 90 00 10Ironing boards, including sleeve boards, whether or not free standing, and legs and tops thereof
- 3924 90 00 90Tableware, kitchenware, other household articles: other, other
3925 Bygningsudstyr, af plast, ikke andetsteds tariferet
- 3925 10 00 00Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 litres
- 3925 20 00 00Doors, windows and their frames and thresholds for doors
- 3925 30 00 00Shutters, blinds (including venetian blinds) and similar articles and parts thereof
- 3925 90 10 00Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings
- 3925 90 20 00Trunking, ducting and cable trays for electrical circuits
- 3925 90 80 00Builders' ware of plastics, not elsewhere specified: other, other
3926 Andre varer af plast samt varer af andre materialer henhørende under pos. 3901-3914
- 3926 10 00 00Office or school supplies
- 3926 20 00 00Articles of apparel and clothing accessories (including gloves, mittens and mitts)
- 3926 30 00 40Plastic internal door handle used in the manufacture of motor vehicles
- 3926 30 00 50Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (abs), whether or not mixed with polycarbonate, and -a pvc foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705
- 3926 30 00 90Fittings for furniture, coachwork or the like: other
- 3926 40 00 00Statuettes and other ornamental articles
- 3926 90 50 00Perforated buckets and similar articles used to filter water at the entrance to drains
- 3926 90 60 00Other articles of plastics and articles of other materials: other, protective face shields/visors
- 3926 90 97 05For technical uses, for use in civil aircraft
- 3926 90 97 10Microspheres of a polymer of divinylbenzene, of a diameter of 4.5 µm or more but not more than 80 µm
- 3926 90 97 22Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with: -a density of 20 kg/m³ or more, but not more than 40 kg/m³, -a tensile strength of not less than 170 kpa, -water absorption coefficient of not greater than 1%, -a length of 5 mm or more but not more than 300 mm, -a height of 10 mm or more but not more than 400 mm, -a depth of 5 mm or more but not more than 250 mm
- 3926 90 97 23Plastic cover with clips for the exterior rear-view mirror of motor vehicles
- 3926 90 97 27Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror
- 3926 90 97 30Parts of car radio and car air-conditioner front panels - of acrylonitrile-butadiene-styrene with or without polycarbonate, - coated with a copper, a nickel and a chrome layers, - with a total thickness of coating of 5.54 μm or more but not more than 49.6 μm
- 3926 90 97 33Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls
- 3926 90 97 40Silicone shell for breast implant
- 3926 90 97 43Mixture of water and by weight 19% or more but not more than 35% of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 µm or more but not more than 4.95 μm
- 3926 90 97 48Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (abs), whether or not mixed with polycarbonate, and -a pvc foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705
- 3926 90 97 58Plastic ferrules and/or plugs: -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2.7 mpa or more but not more than 114 mpa, for tubings with: -outer diameter of 0.33 mm or more but not more than 3.3 mm, -suitable for a maximum working pressure rate of 2.7 mpa or more but not more than 114 mpa, -suitable for all solutions used in chromatography, for use in the production of chromatographic systems
- 3926 90 97 60Sheath contraceptives of polyurethane
- 3926 90 97 77Silicone decoupling ring with an inner diameter of 13.2 mm or more but no more than 17.2 mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems
- 3926 90 97 90Other articles of plastics and articles of other materials: other, other, other