Celní sazebník Spojeného království
Celní sazebník Spojeného království, kapitola 74: Měď a výrobky z ní
- 73Kódy zboží
- 0 %–4 %Sazba
Celní sazebník Spojeného království má v kapitole 74 73 kódů v 16 číslech.
Sazby: od 0 % do 4 %, průměr 0,7 %; bez cla: 57 kódů.
Nejvíce kódů má číslo 7410, měděné fólie: celkem 12.
Nejčastější sazba: bez cla, u 57 kódů.
Nejvyšší sazba: 4 % u kódu 7408 11 00 00 (of which the maximum cross-sectional dimension exceeds 6 mm).
7401 Měděný kamínek (lech); cementová měď (srážená měď)
7402 Nerafinovaná měď; měděné anody pro elektrolytickou rafinaci
7403 Rafinovaná měď a slitiny mědi, netvářené (surové)
- 7403 11 00 00Cathodes and sections of cathodes
- 7403 12 00 00Refined copper and copper alloys, unwrought: refined copper, wire-bars
- 7403 13 00 00Refined copper and copper alloys, unwrought: refined copper, billets
- 7403 19 00 00Refined copper and copper alloys, unwrought: refined copper, other
- 7403 21 00 00Copper-zinc base alloys (brass)
- 7403 22 00 00Copper-tin base alloys (bronze)
- 7403 29 00 00Other copper alloys (other than master alloys of heading 7405)
7404 Měděný odpad a šrot
7405 Předslitiny mědi
7406 Měděný prášek a šupiny (vločky)
7407 Měděné tyče, pruty a profily
7408 Měděné dráty
- 7408 11 00 00Of which the maximum cross-sectional dimension exceeds 6 mm
- 7408 19 10 00Of which the maximum cross-sectional dimension exceeds 0.5 mm
- 7408 19 90 00Of which the maximum cross-sectional dimension does not exceed 0.5 mm
- 7408 21 00 00Of copper-zinc base alloys (brass)
- 7408 22 00 00Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
- 7408 29 00 00Copper wire, of copper alloys, other
7409 Měděné desky, plechy a pásy, o tloušťce převyšující 0,15 mm
- 7409 11 00 00Copper plates, sheets and strip, of a thickness exceeding: of refined copper, in coils
- 7409 19 00 00Copper plates, sheets and strip, of a thickness exceeding: of refined copper, other
- 7409 21 00 00Of copper-zinc base alloys (brass): in coils
- 7409 29 00 00Of copper-zinc base alloys (brass): other
- 7409 31 00 00Of copper-tin base alloys (bronze): in coils
- 7409 39 00 00Of copper-tin base alloys (bronze): other
- 7409 40 00 00Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
- 7409 90 00 00Of other copper alloys
7410 Měděné fólie (též potištěné nebo na podložce z papíru, kartónu, lepenky, plastů nebo na podobném podkladovém materiálu), o tloušťce (s výjimkou jakékoliv podložky) nepřesahující 0,15 mm
- 7410 11 00 50Refined copper foil and strips, electrolytically manufactured, with a thickness of 0.015 mm or more but not more than 0.150 mm, used for the manufacture of laminates for printed circuit boards and of printed circuit boards in the printed circuit board industry
- 7410 11 00 90Copper foil: not backed, of refined copper, other
- 7410 12 00 00Copper foil: not backed, of copper alloys
- 7410 21 00 10Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil
- 7410 21 00 20Foils, rolls composed of one layer of glass epoxy of 100 µm colaminated with refined copper foil on one or two sides of 35 µm with a tolerance of 10% for use in the production of smart cards
- 7410 21 00 30Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil
- 7410 21 00 40Sheet or plates: - consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or - consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0.15 mm
- 7410 21 00 50Plates: -consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin, -covered on one or both sides with copper foil with a thickness of not more than 0.15 mm, and -with a dielectric constant (dk) of less than 3.9 and a loss factor (df) of less than 0.015 at a measuring frequency of 10 ghz, as measured according to ipc-tm-650
- 7410 21 00 55Plates: - consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, - covered on one or both sides with copper foil with a thickness of not more than 0.15 mm, - with a dielectric constant (dk) of less than 5.4 at 1 mhz, as measured according to ipc-tm-650 2.5.5.2, - with a loss tangent of less than 0.035 at 1 mhz, as measured according to ipc-tm-650 2.5.5.2, - with a comparative tracking index (cti) of 600 or more
- 7410 21 00 65Sheets or plates -consisting of at least one layer of fiberglass fabric impregnated with modified epoxy resin, without the use of halogenated flame retardants, -covered on one or both sides with copper foil with a thickness of 0.15 mm or less, -and with a tg of 145°c or more but not more than 280°c according to tma, in agreement with ipc-4101/128 or 4101/130 or ipc-4101/153 or 4101/154
- 7410 21 00 90Copper foil: backed, of refined copper, other
- 7410 22 00 00Copper foil: backed, of copper alloys
7411 Měděné trouby a trubky
- 7411 10 10 00Copper tubes and pipes: of refined copper, straight
- 7411 10 90 10Pipes and tubes, of refined copper, in level wound coils, whether smooth or with inner grooves, not further processed
- 7411 10 90 90Copper tubes and pipes: of refined copper, other, other
- 7411 21 10 00Of copper-zinc base alloys (brass): straight
- 7411 21 90 00Of copper-zinc base alloys (brass): other
- 7411 22 00 00Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
- 7411 29 00 00Copper tubes and pipes: of copper alloys, other
7412 Měděné příslušenství (fitinky) pro trouby nebo trubky (například spojky, kolena, nátrubky)
7413 Splétaná lanka, lana, kabely, splétané pásy a podobné výrobky, z mědi, elektricky neizolované
7415 Hřebíky, cvočky, napínáčky, skoby, svorky a sponky (jiné než čísla 8305) a podobné výrobky, z mědi nebo ze železa nebo oceli s měděnými hlavami; šrouby a vruty, svorníky (maticové šrouby), matice, háky se závitem, nýty, závlačky, příčné klíny, podložky (včetně pružných podložek) a podobné výrobky, z mědi
7418 Stolní, kuchyňské nebo jiné výrobky pro domácnost a jejich části a součásti, z mědi; drátěnky na nádobí a drátkovací nebo čisticí polštářky, rukavice a podobné výrobky, z mědi; sanitární (hygienické) výrobky a jejich části a součásti, z mědi
- 7418 10 10 00Cooking or heating apparatus of a kind used for domestic purposes, non-electric, and parts thereof
- 7418 10 90 10Table, kitchen or other household articles and parts thereof: other, hand-made
- 7418 10 90 90Table, kitchen or other household articles and parts thereof: other, other
- 7418 20 00 10Sanitary ware and parts thereof: hand-made
- 7418 20 00 90Sanitary ware and parts thereof: other
7419 Ostatní výrobky z mědi
- 7419 20 00 10Cast, moulded, stamped or forged, but not further worked: hand-made
- 7419 20 00 90Cast, moulded, stamped or forged, but not further worked: other
- 7419 80 10 00Cloth (including endless bands), grill and netting, of wire of which no cross-sectional dimension exceeds 6 mm; expanded metal
- 7419 80 30 00Other articles of copper: other, springs
- 7419 80 90 10Other articles of copper: other, other, hand-made
- 7419 80 90 98Other articles of copper: other, other, other