Norský celní sazebník (Tolltariffen)
Norský celní sazebník (Tolltariffen), kapitola 72: Železo a ocel
- 169Kódy zboží
- Bez claSazba
Norský celní sazebník (Tolltariffen) má v kapitole 72 169 kódů v 29 číslech.
Sazby: bez cla; bez cla: 169 kódů.
Nejvíce kódů má číslo 7202, feroslitiny: celkem 15.
Nejčastější sazba: bez cla, u 169 kódů.
7201 Surové železo a vysokopecní zrcadlovina v houskách, ingotech nebo jiných primárních formách
7202 Feroslitiny
- 7202.11.00Containing by weight more than 2 % of carbon
- 7202.19.00Ferro-alloys, other
- 7202.21.00Containing by weight more than 55 % of silicon
- 7202.29.00Ferro-alloys, other
- 7202.30.00Ferro-alloys, ferro-silico-manganese
- 7202.41.00Containing by weight more than 4 % of carbon
- 7202.49.00Ferro-alloys, ferro-silico-manganese, other
- 7202.50.00Ferro-alloys, ferro-silico-chromium
- 7202.60.00Ferro-alloys, ferro-nickel
- 7202.70.00Ferro-alloys, ferro-molybdenum
- 7202.80.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten
- 7202.91.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-titanium and ferro-silico-titanium
- 7202.92.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-vanadium
- 7202.93.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-niobium
- 7202.99.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other
7203 Produkty ze železa získané přímou redukcí železné rudy a jiné houbovité železo, v kusech, peletách nebo podobných formách; železo, jehož ryzost je minimálně 99,94 % hmotnostních, v kusech, peletách nebo podobných formách
7204 Odpad a šrot ze železa nebo oceli; přetavený odpad ze železa nebo oceli v ingotech
- 7204.10.00Waste and scrap of cast iron
- 7204.21.00Waste and scrap of cast iron: of stainless steel
- 7204.29.00Waste and scrap of cast iron: other
- 7204.30.00Waste and scrap of tinned iron or steel
- 7204.41.00Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
- 7204.49.00Waste and scrap of tinned iron or steel: other
- 7204.50.00Ferrous waste and scrap: remelting scrap ingots
7205 Granule a prášky ze surového železa, vysokopecní zrcadloviny, železa nebo oceli
7206 Železo a nelegovaná ocel v ingotech nebo v jiných primárních formách (kromě železa čísla 7203)
7207 Polotovary ze železa nebo nelegované oceli
7208 Ploché válcované výrobky ze železa nebo nelegované oceli, o šířce 600 mm nebo větší, válcované za tepla, neplátované, nepokovené ani nepotažené
- 7208.10.00In coils, not further worked than hot-rolled, with patterns in relief
- 7208.25.00Of a thickness of 4.75 mm or more
- 7208.26.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27.00Of a thickness of less than 3 mm
- 7208.36.00Of a thickness exceeding 10 mm
- 7208.37.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.38.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.39.00Of a thickness of less than 3 mm
- 7208.40.00Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.51.00Of a thickness exceeding 10 mm
- 7208.52.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.53.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54.00Of a thickness of less than 3 mm
- 7208.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7209 Ploché válcované výrobky ze železa nebo nelegované oceli, o šířce 600 mm nebo větší, válcované za studena (úběrem za studena), neplátované, nepokovené ani nepotažené
- 7209.15.00Of a thickness of 3 mm or more
- 7209.16.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.17.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.18.00Of a thickness of less than 0.5 mm
- 7209.25.00Of a thickness of 3 mm or more
- 7209.26.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.27.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.28.00Of a thickness of less than 0.5 mm
- 7209.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7210 Ploché válcované výrobky ze železa nebo nelegované oceli, o šířce 600 mm nebo větší, plátované, pokovené nebo potažené
- 7210.11.00Of a thickness of 0.5 mm or more
- 7210.12.00Of a thickness of less than 0.5 mm
- 7210.20.00Plated or coated with lead, including terne-plate
- 7210.30.00Electrolytically plated or coated with zinc
- 7210.41.00Electrolytically plated or coated with zinc: corrugated
- 7210.49.00Electrolytically plated or coated with zinc: other
- 7210.50.00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61.00Plated or coated with aluminium-zinc alloys
- 7210.69.00Plated or coated with chromium oxides or with chromium: other
- 7210.70.00Painted, varnished or coated with plastics
- 7210.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7211 Ploché válcované výrobky ze železa nebo nelegované oceli, o šířce menší než 600 mm, neplátované, nepokovené ani nepotažené
- 7211.13.00Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- 7211.14.00Other, of a thickness of 4.75 mm or more
- 7211.19.00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211.23.00Containing by weight less than 0.25 % of carbon
- 7211.29.00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7212 Ploché válcované výrobky ze železa nebo nelegované oceli, o šířce menší než 600 mm, plátované, pokovené nebo potažené
7213 Tyče a pruty, válcované za tepla, v nepravidelně navinutých svitcích, ze železa nebo nelegované oceli
7214 Ostatní tyče a pruty ze železa nebo nelegované oceli, po kování, válcování, tažení nebo protlačování za tepla již dále neopracované, avšak včetně těch, které byly po válcování krouceny
- 7214.10.00Other bars and rods of iron or non-alloy steel, not further: forged
- 7214.20.00Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
- 7214.30.00Other, of free-cutting steel
- 7214.91.00Of rectangular (other than square) cross-section
- 7214.99.00Other, of free-cutting steel: other
7215 Ostatní tyče a pruty ze železa nebo nelegované oceli
7216 Úhelníky, tvarovky a profily ze železa nebo nelegované oceli
- 7216.10.00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.21.00U, I or H sections, not further worked than hot-rolled: l sections
- 7216.22.00U, I or H sections, not further worked than hot-rolled: t sections
- 7216.31.00U, I or H sections, not further worked than hot-rolled: u sections
- 7216.32.00U, I or H sections, not further worked than hot-rolled: i sections
- 7216.33.00U, I or H sections, not further worked than hot-rolled: h sections
- 7216.40.00L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
- 7216.50.00Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
- 7216.61.00Obtained from flat-rolled products
- 7216.69.00Other angles, shapes and sections, not further worked than: other
- 7216.91.00Cold-formed or cold-finished from flat-rolled products
- 7216.99.00Other angles, shapes and sections, not further worked than: other
7217 Dráty ze železa nebo nelegované oceli
7218 Nerezavějící ocel v ingotech nebo v jiných primárních formách; polotovary z nerezavějící oceli
7219 Ploché válcované výrobky z nerezavějící oceli, o šířce 600 mm nebo větší
- 7219.11.00Of a thickness exceeding 10 mm
- 7219.12.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.00Of a thickness of less than 3 mm
- 7219.21.00Of a thickness exceeding 10 mm
- 7219.22.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.00Of a thickness of less than 3 mm
- 7219.31.00Of a thickness of 4.75 mm or more
- 7219.32.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.33.00Of a thickness exceeding 1 mm but less than 3 mm
- 7219.34.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7219.35.00Of a thickness of less than 0.5 mm
- 7219.90.00Flat-rolled products of stainless steel, of a width of 600: other
7220 Ploché válcované výrobky z nerezavějící oceli, o šířce menší než 600 mm
7221 Tyče a pruty, válcované za tepla, v nepravidelně navinutých svitcích, z nerezavějící oceli
7222 Ostatní tyče a pruty z nerezavějící oceli; úhelníky, tvarovky a profily z nerezavějící oceli
7223 Dráty z nerezavějící oceli
7224 Ostatní legovaná ocel v ingotech nebo v jiných primárních formách; polotovary z ostatní legované oceli
7225 Ploché válcované výrobky z ostatní legované oceli, o šířce 600 mm nebo větší
- 7225.11.00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7225.19.00Flat-rolled products of other alloy steel, of a width: other
- 7225.30.00Other, not further worked than hot-rolled, in coils
- 7225.40.00Other, not further worked than hot-rolled, not in coils
- 7225.50.00Other, not further worked than cold-rolled (cold-reduced)
- 7225.91.00Electrolytically plated or coated with zinc
- 7225.92.00Otherwise plated or coated with zinc
- 7225.99.00Other, not further worked than cold-rolled (cold-reduced): other
7226 Ploché válcované výrobky z ostatní legované oceli, o šířce menší než 600 mm
- 7226.11.00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7226.19.00Flat-rolled products of other alloy steel, of a width: other
- 7226.20.00Of high speed steel
- 7226.91.00Not further worked than hot-rolled
- 7226.92.00Not further worked than cold-rolled (cold-reduced)
- 7226.99.00Of high speed steel: other
7227 Tyče a pruty, válcované za tepla, v nepravidelně navinutých svitcích, z ostatní legované oceli
7228 Ostatní tyče a pruty z ostatní legované oceli; úhelníky, tvarovky a profily z ostatní legované oceli; duté vrtné tyče a pruty z legované nebo nelegované oceli
- 7228.10.00Bars and rods, of high speed steel
- 7228.20.00Bars and rods, of silico-manganese steel
- 7228.30.00Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
- 7228.40.00Other bars and rods, not further worked than forged
- 7228.50.00Other bars and rods, not further worked than cold-formed or cold-finished
- 7228.60.00Other bars and rods
- 7228.70.00Angles, shapes and sections
- 7228.80.10Of alloy steel or high carbon steel
- 7228.80.90Hollow drill bars and rods: other