Harmonizovaný colný sadzobník USA
Harmonizovaný colný sadzobník USA, kapitola 72: Železo a oceľ
- 262Kódy tovaru
- 0 %–10 %Sadzba
Harmonizovaný colný sadzobník USA má v kapitole 72 262 kódov v 29 položkách.
Sadzby: od 0 % do 10 %, priemer 0,3 %; bez cla: 240 kódov.
Najpodrobnejšie je členená položka 7202 (ferozliatiny): 24 kódov.
Najčastejšia sadzba: bez cla, pri 240 kódoch.
Najvyššia sadzba: 10 % pri kóde 7202.50.00 (ferroalloys, ferrosilicon chromium).
7201 Surové železo a vysokopecná zrkadlovina v bochníkoch, v blokoch alebo ostatných základných tvaroch
7202 Ferozliatiny
- 7202.11.10Containing by weight more than 2 percent but not more than 4 percent of carbon
- 7202.11.50Containing by weight more than 4 percent of carbon
- 7202.19.10Containing by weight not more than 1 percent of carbon
- 7202.19.50Containing by weight more than 1 percent but not more than 2 percent of carbon
- 7202.21.10Containing by weight more than 3 percent of calcium
- 7202.21.50Containing by weight more than 55 percent but not more than: other
- 7202.21.75Containing by weight more than 80 percent but not more than 90 percent of silicon
- 7202.21.90Containing by weight more than 90 percent of silicon
- 7202.29.00Ferroalloys, ferrosilicon, other
- 7202.30.00Ferroalloys, ferrosilicon manganese
- 7202.41.00Containing by weight more than 4 percent of carbon
- 7202.49.10Containing by weight more than 3 percent of carbon
- 7202.49.50Ferroalloys, ferrochromium, other
- 7202.50.00Ferroalloys, ferrosilicon chromium
- 7202.60.00Ferroalloys, ferronickel
- 7202.70.00Ferroalloys, ferromolybdenum
- 7202.80.00Ferrotungsten and ferrosilicon tungsten
- 7202.91.00Ferrotitanium and ferrosilicon titanium
- 7202.92.00Ferroalloys, other, ferrovanadium
- 7202.93.40Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon
- 7202.93.80Ferroalloys, other, ferroniobium, other
- 7202.99.10Ferroalloys, other, ferrozirconium
- 7202.99.20Ferroalloys, other, calcium silicon
- 7202.99.80Ferroalloys, other
7203 Výrobky zo železa získané priamou redukciou železnej rudy a ostatné hubovité železo, v kusoch, v peletách alebo podobných tvaroch; železo, ktorého rýdzosť je najmenej 99,94 hmotnostných %, v kusoch, peletách alebo podobných tvaroch
7204 Železný a oceľový odpad a šrot; pretavený odpad zo železa alebo ocele v ingotoch
- 7204.10.00Waste and scrap of cast iron
- 7204.21.00Waste and scrap of alloy steel: of stainless steel
- 7204.29.00Waste and scrap of alloy steel: other
- 7204.30.00Waste and scrap of tinned iron or steel
- 7204.41.00Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
- 7204.49.00Other waste and scrap: other
- 7204.50.00Ferrous waste and scrap: remelting scrap ingots
7205 Granuly a prášok, zo surového železa, vysokopecnej zrkadloviny, železa alebo ocele
7206 Železo a nelegovaná oceľ v ingotoch alebo ostatných základných tvaroch (okrem železa položky 7203)
7207 Polotovary zo železa alebo z nelegovanej ocele
- 7207.11.00Of rectangular (including square) cross section, the width measuring less than twice the thickness
- 7207.12.00Other, of rectangular (other than square) cross section
- 7207.19.00Containing by weight less than 0.25 percent of carbon: other
- 7207.20.00Containing by weight 0.25 percent or more of carbon
7208 Ploché valcované výrobky zo železa alebo nelegovanej ocele, so šírkou 600 mm alebo viac, valcované za tepla, neplátované, nepokovované alebo nepotiahnuté
- 7208.10.15In coils, not further worked than hot-rolled, with patterns: pickled
- 7208.10.30Of a thickness of 4.75 mm or more
- 7208.10.60Of a thickness of less than 4.75 mm
- 7208.25.30Of a thickness of 4.75 mm or more: of high-strength steel
- 7208.25.60Of a thickness of 4.75 mm or more: other
- 7208.26.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27.00Of a thickness of less than 3 mm
- 7208.36.00Of a thickness exceeding 10 mm
- 7208.37.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.38.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.39.00Of a thickness of less than 3 mm
- 7208.40.30Of a thickness of 4.75 mm or more
- 7208.40.60Of a thickness of less than 4.75 mm
- 7208.51.00Of a thickness exceeding 10 mm
- 7208.52.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.53.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54.00Of a thickness of less than 3 mm
- 7208.90.00Flat-rolled products of iron or nonalloy steel, of a width: other
7209 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, so šírkou 600 mm alebo viac, valcované za studena (úberom za studena), neplátované, nepokovované alebo nepotiahnuté
- 7209.15.00Of a thickness of 3 mm or more
- 7209.16.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.17.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.18.15Of a thickness of less than 0.5 mm: of high-strength steel
- 7209.18.25Of a thickness of less than 0.361 mm (blackplate)
- 7209.18.60Of a thickness of less than 0.5 mm: other
- 7209.25.00Of a thickness of 3 mm or more
- 7209.26.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.27.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.28.00Of a thickness of less than 0.5 mm
- 7209.90.00Flat-rolled products of iron or nonalloy steel, of a width: other
7210 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, v šírke 600 mm alebo viac, plátované, pokovované alebo potiahnuté
- 7210.11.00Of a thickness of 0.5 mm or more
- 7210.12.00Of a thickness of less than 0.5 mm
- 7210.20.00Plated or coated with lead, including terne-plate
- 7210.30.00Electrolytically plated or coated with zinc
- 7210.41.00Otherwise plated or coated with zinc: corrugated
- 7210.49.00Otherwise plated or coated with zinc: other
- 7210.50.00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61.00Plated or coated with aluminum-zinc alloys
- 7210.69.00Plated or coated with aluminum: other
- 7210.70.30Not coated or plated with metal and not clad
- 7210.70.60Painted, varnished or coated with plastics: other
- 7210.90.10Flat-rolled products of iron or nonalloy steel, of a width: other, clad
- 7210.90.60Electrolytically coated or plated with base metal
- 7210.90.90Flat-rolled products of iron or nonalloy steel, of a width: other
7211 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, so šírkou menej ako 600 mm, neplátované, nepokovované alebo nepotiahnuté
- 7211.13.00Not further worked than hot-rolled: universal mill plate
- 7211.14.00Other, of a thickness of 4.75 mm or more
- 7211.19.15Of a width of less than 300 mm: of high-strength steel
- 7211.19.20Of a thickness exceeding 1.25 mm
- 7211.19.30Of a width of less than 300 mm: other
- 7211.19.45Not further worked than hot-rolled: other, of high-strength steel
- 7211.19.60Not further worked than hot-rolled: other, pickled
- 7211.19.75Not further worked than hot-rolled: other
- 7211.23.15Of a thickness exceeding 1.25 mm: of high-strength steel
- 7211.23.20Of a thickness exceeding 1.25 mm: other
- 7211.23.30Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
- 7211.23.45Of a thickness not exceeding 0.25 mm
- 7211.23.60Containing by weight less than 0.25 percent of carbon: other
- 7211.29.20Of a thickness exceeding 0.25 mm
- 7211.29.45Of a width of less than 300 mm: other
- 7211.29.60Not further worked than cold-rolled (cold-reduced): other
- 7211.90.00Flat-rolled products of iron or nonalloy steel, of a width: other
7212 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, so šírkou menej ako 600 mm, plátované, pokovované alebo potiahnuté
- 7212.10.00Plated or coated with tin
- 7212.20.00Electrolytically plated or coated with zinc
- 7212.30.10Of a thickness exceeding 0.25 mm or more
- 7212.30.30Of a width of less than 300 mm: other
- 7212.30.50Otherwise plated or coated with zinc: other
- 7212.40.10Of a width of less than 300 mm
- 7212.40.50Painted, varnished or coated with plastics: other
- 7212.50.00Otherwise plated or coated
- 7212.60.00Flat-rolled products of iron or nonalloy steel, of a width: clad
7213 Tyče a prúty, valcované za tepla, v nepravidelne navinutých zvitkoch, zo železa alebo z nelegovanej ocele
- 7213.10.00Concrete reinforcing bars and rods
- 7213.20.00Other, of free-cutting steel
- 7213.91.30Not tempered, not treated and not partly manufactured
- 7213.91.45Containing by weight 0.6 percent or more of carbon
- 7213.91.60Of circular cross section measuring less than 14: other
- 7213.99.00Bars and rods, hot-rolled, in irregularly wound coils: other
7214 Ostatné tyče a prúty zo železa alebo nelegovanej ocele, neupravené inak ako kovaním za tepla, valcovaním za tepla, ťahaním za tepla alebo pretláčaním za tepla, prípadne po valcovaní ešte krútené
7215 Ostatné tyče a prúty zo železa alebo nelegovanej ocele
- 7215.10.00Of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215.50.00Other, not further worked than cold-formed or cold-finished
- 7215.90.10Plated or coated with metal: not cold-formed
- 7215.90.30Plated or coated with metal: cold-formed
- 7215.90.50Other bars and rods of iron or nonalloy steel: other
7216 Uholníky, tvarovky a profily zo železa alebo z nelegovanej ocele
- 7216.10.00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.21.00L or T sections, not further worked than hot-rolled: l sections
- 7216.22.00L or T sections, not further worked than hot-rolled: t sections
- 7216.31.00U, I or H sections, not further worked than hot-rolled: u sections
- 7216.32.00I sections (standard beams)
- 7216.33.00U, I or H sections, not further worked than hot-rolled: h sections
- 7216.40.00L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
- 7216.50.00Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
- 7216.61.00Obtained from flat-rolled products
- 7216.69.00Angles, shapes and sections, not further worked than: other
- 7216.91.00Cold-formed or cold-finished from flat-rolled products
- 7216.99.00Angles, shapes and sections of iron or nonalloy steel: other
7217 Drôty zo železa alebo z nelegovanej ocele
- 7217.10.10Of a thickness not exceeding 0.25 mm
- 7217.10.20Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
- 7217.10.30Of a thickness exceeding 1.25 mm
- 7217.10.40With a diameter of less than 1.5 mm
- 7217.10.50With a diameter of 1.5 mm or more
- 7217.10.60Containing by weight less than 0.25 percent of carbon: other wire
- 7217.10.70Not plated or coated, whether or not polished: other, flat wire
- 7217.10.80Not plated or coated, whether or not polished: other, round wire
- 7217.10.90Not plated or coated, whether or not polished: other, other wire
- 7217.20.15Plated or coated with zinc: flat wire
- 7217.20.30With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
- 7217.20.45Plated or coated with zinc: round wire, other
- 7217.20.60Containing by weight less than 0.25 percent of carbon
- 7217.20.75Plated or coated with zinc: other
- 7217.30.15Plated or coated with other base metals: flat wire
- 7217.30.30With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
- 7217.30.45Plated or coated with other base metals: round wire, other
- 7217.30.60Containing by weight less than 0.25 percent of carbon
- 7217.30.75Plated or coated with other base metals: other
- 7217.90.10Wire of iron or nonalloy steel: other, coated with plastics
- 7217.90.50Wire of iron or nonalloy steel: other
7218 Nehrdzavejúca oceľ v ingotoch alebo v ostatných základných tvaroch; polotovary z nehrdzavejúcej ocele
7219 Ploché valcované výrobky z nehrdzavejúcej ocele so šírkou 600 mm alebo viac
- 7219.11.00Of a thickness exceeding 10 mm
- 7219.12.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.00Of a thickness of less than 3 mm
- 7219.21.00Of a thickness exceeding 10 mm
- 7219.22.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.00Of a thickness of less than 3 mm
- 7219.31.00Of a thickness of 4.75 mm or more
- 7219.32.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.33.00Of a thickness exceeding 1 mm but less than 3 mm
- 7219.34.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7219.35.00Of a thickness of less than 0.5 mm
- 7219.90.00Flat-rolled products of stainless steel, of a width of 600: other
7220 Ploché valcované výrobky z nehrdzavejúcej ocele so šírkou menej ako 600 mm
- 7220.11.00Of a thickness of 4.75 mm or more
- 7220.12.10Of a width of 300 mm or more
- 7220.12.50Of a width of less than 300 mm
- 7220.20.10Of a width of 300 mm or more
- 7220.20.60Of a thickness exceeding 1.25 mm
- 7220.20.70Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
- 7220.20.80Of a thickness not exceeding 0.25 mm: razor blade steel
- 7220.20.90Of a thickness not exceeding 0.25 mm: other
- 7220.90.00Flat-rolled products of stainless steel, of a width of less: other
7221 Tyče a prúty, valcované za tepla, v nepravidelne navinutých zvitkoch, z nehrdzavejúcej ocele
7222 Ostatné tyče a prúty z nehrdzavejúcej ocele; uholníky, tvarovky a profily z nehrdzavejúcej ocele
- 7222.11.00Bars and rods, not further worked than hot-rolled: of circular cross-section
- 7222.19.00Bars and rods, not further worked than hot-rolled: other
- 7222.20.00Bars and rods, not further worked than cold-formed or cold-finished
- 7222.30.00Other bars and rods
- 7222.40.30Hot-rolled, not drilled, not punched and not otherwise advanced
- 7222.40.60Angles, shapes and sections: other
7223 Drôty z nehrdzavejúcej ocele
7224 Ostatná legovaná oceľ v ingotoch alebo v ostatných základných tvaroch; polotovary z ostatnej legovanej ocele
7225 Ploché valcované výrobky z ostatnej legovanej ocele, so šírkou 600 mm alebo viac
- 7225.11.00Of silicon electrical steel: grain-oriented
- 7225.19.00Of silicon electrical steel: other
- 7225.30.11Of a thickness of 4.75 mm or more: of tool steel
- 7225.30.30Of a thickness of 4.75 mm or more: other
- 7225.30.51Of a thickness of less than 4.75 mm: of tool steel
- 7225.30.70Of a thickness of less than 4.75 mm: other
- 7225.40.11Of a thickness of 4.75 mm or more: of tool steel
- 7225.40.30Of a thickness of 4.75 mm or more: other
- 7225.40.51Of a thickness of less than 4.75 mm: of tool steel
- 7225.40.70Of a thickness of less than 4.75 mm: other
- 7225.50.11Other, not further worked than cold-rolled (cold-reduced): of tool steel
- 7225.50.60Of a thickness of 4.75 mm or more
- 7225.50.70Of a thickness of less than 4.75 mm: heat-resisting steel
- 7225.50.80Of a thickness of less than 4.75 mm: other
- 7225.91.00Electrolytically plated or coated with zinc
- 7225.92.00Otherwise plated or coated with zinc
- 7225.99.00Flat-rolled products of other alloy steel, of a width: other
7226 Ploché valcované výrobky z ostatnej legovanej ocele, so šírkou menej ako 600 mm
- 7226.11.10Of a width of 300 mm or more
- 7226.11.90Of a width of less than 300 mm
- 7226.19.10Of a width of 300 mm or more
- 7226.19.90Of a width of less than 300 mm
- 7226.20.00Flat-rolled products of other alloy steel, of a width: of high-speed steel
- 7226.91.05Of chipper knife steel
- 7226.91.15Of a width of 300 mm or more
- 7226.91.25Of a width of less than 300 mm
- 7226.91.50Of a thickness of 4.75 mm or more
- 7226.91.70Of a width of 300 mm or more
- 7226.91.80Of a width of less than 300 mm
- 7226.92.10Of a width of 300 mm or more
- 7226.92.30Of a width of less than 300 mm
- 7226.92.50Of a width of 300 mm or more
- 7226.92.70Of a thickness not exceeding 0.25 mm
- 7226.92.80Of a thickness exceeding 0.25 mm
- 7226.99.01Flat-rolled products of other alloy steel, of a width: other
7227 Tyče a prúty, valcované za tepla, v nepravidelne navinutých zvitkoch, z ostatnej legovanej ocele
- 7227.10.00Bars and rods, hot-rolled, in irregularly wound coils: of high-speed steel
- 7227.20.00Bars and rods, hot-rolled, in irregularly wound coils: of silico-manganese steel
- 7227.90.10Not tempered, not treated, and not partly manufactured
- 7227.90.20Of tool steel (other than high-speed steel): other
- 7227.90.60Bars and rods, hot-rolled, in irregularly wound coils: other
7228 Ostatné tyče a prúty z ostatnej legovanej ocele; uholníky, tvarovky a profily z ostatnej legovanej ocele; duté vrtné tyče a prúty, z legovanej alebo nelegovanej ocele
- 7228.10.00Bars and rods, of high-speed steel
- 7228.20.10Bars and rods, of silico-manganese steel: not cold-formed
- 7228.20.50Bars and rods, of silico-manganese steel: cold-formed
- 7228.30.20Of tool steel (other than high-speed steel): of ball-bearing steel
- 7228.30.40Of chipper knife steel, not cold-formed
- 7228.30.60Of tool steel (other than high-speed steel): other
- 7228.30.80Other bars and rods, not further worked than hot-rolled: other
- 7228.40.00Other bars and rods, not further worked than forged
- 7228.50.10Of tool steel (other than high-speed steel)
- 7228.50.50Other bars and rods, not further worked than cold-formed: other
- 7228.60.10Of tool steel (other than high-speed steel)
- 7228.60.60Other bars and rods: other, not cold-formed
- 7228.60.80Other bars and rods: other, cold-formed
- 7228.70.30Hot-rolled, not drilled, not punched and not otherwise advanced
- 7228.70.60Angles, shapes and sections: other
- 7228.80.00Hollow drill bars and rods