Japonský colný sadzobník
Japonský colný sadzobník, kapitola 72: Železo a oceľ
- 346Kódy tovaru
- 0 %–6,3 %Sadzba
Japonský colný sadzobník má v kapitole 72 346 kódov v 29 položkách.
Sadzby: od 0 % do 6,3 %, priemer 0,2 %; bez cla: 326 kódov.
Najpodrobnejšie je členená položka 7208 (ploché valcované výrobky zo železa alebo nelegovanej ocele, so šírkou…): 48 kódov.
Najčastejšia sadzba: bez cla, pri 326 kódoch.
Najvyššia sadzba: 6,3 % pri kóde 7202.11.000 (containing by weight more than 2 % of carbon).
7201 Surové železo a vysokopecná zrkadlovina v bochníkoch, v blokoch alebo ostatných základných tvaroch
- 7201.10.010Containing less than 1.2 % by weight of silicon and not more than 0.04 % by weight of phosphorus
- 7201.10.091Containing by weight less than 1.6 % of silicon
- 7201.10.099Pig iron and spiegeleisen in pigs, blocks or other primary: other
- 7201.20.000Non-alloy pig iron containing by weight more than 0.5 % of phosphorus
- 7201.50.000Alloy pig iron; spiegeleisen
7202 Ferozliatiny
- 7202.11.000Containing by weight more than 2 % of carbon
- 7202.19.000Ferro-alloys, other
- 7202.21.000Containing by weight more than 55 % of silicon
- 7202.29.000Ferro-alloys, other
- 7202.30.000Ferro-alloys, ferro-silico-manganese
- 7202.41.000Containing by weight more than 4 % of carbon
- 7202.49.000Ferro-alloys, ferro-silico-manganese, other
- 7202.50.000Ferro-alloys, ferro-silico-chromium
- 7202.60.010Containing by weight less than 33 % of nickel
- 7202.60.090Ferro-alloys, other
- 7202.70.000Ferro-alloys, ferro-molybdenum
- 7202.80.010Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, 1 Ferro-tungsten
- 7202.80.020Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, 2 Ferro-silico-tungsten
- 7202.91.000Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-titanium and ferro-silico-titanium
- 7202.92.000Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-vanadium
- 7202.93.000Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-niobium
- 7202.99.010Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-phosphorus
- 7202.99.090Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other
7203 Výrobky zo železa získané priamou redukciou železnej rudy a ostatné hubovité železo, v kusoch, v peletách alebo podobných tvaroch; železo, ktorého rýdzosť je najmenej 99,94 hmotnostných %, v kusoch, peletách alebo podobných tvaroch
7204 Železný a oceľový odpad a šrot; pretavený odpad zo železa alebo ocele v ingotoch
- 7204.10.000Waste and scrap of cast iron
- 7204.21.000Waste and scrap of cast iron: of stainless steel
- 7204.29.000Waste and scrap of cast iron: other
- 7204.30.000Waste and scrap of tinned iron or steel
- 7204.41.000Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
- 7204.49.000Waste and scrap of tinned iron or steel: other
- 7204.50.0101 Of alloy steel
- 7204.50.020Ferrous waste and scrap: remelting scrap ingots, 2 Other
7205 Granuly a prášok, zo surového železa, vysokopecnej zrkadloviny, železa alebo ocele
- 7205.10.000Granules and powders, of pig iron, spiegeleisen, iron: granules
- 7205.21.010Containing not less than 1% but less than 5 % by weight of nickel
- 7205.21.090Granules and powders, of pig iron, spiegeleisen, iron: granules, other
- 7205.29.000Granules and powders, of pig iron, spiegeleisen, iron: granules, other
7206 Železo a nelegovaná oceľ v ingotoch alebo ostatných základných tvaroch (okrem železa položky 7203)
7207 Polotovary zo železa alebo z nelegovanej ocele
- 7207.11.000Of rectangular (including square) cross-section, the width measuring less than twice the thickness
- 7207.12.000Other, of rectangular (other than square) cross-section
- 7207.19.000Semi-finished products of iron or non-alloy steel: other
- 7207.20.011Containing by weight 0.25 % or more of carbon: billets
- 7207.20.012Containing by weight 0.25 % or more of carbon: slabs
- 7207.20.019Containing by weight 0.25 % or more of carbon: other
- 7207.20.020Containing by weight 0.25 % or more of carbon: 2 Other
7208 Ploché valcované výrobky zo železa alebo nelegovanej ocele, so šírkou 600 mm alebo viac, valcované za tepla, neplátované, nepokovované alebo nepotiahnuté
- 7208.10.0101 Containing by weight less than 0.6 % of carbon
- 7208.10.021(1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
- 7208.10.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7208.25.011Of a thickness of less than 6 mm
- 7208.25.019Of a thickness of 4.75 mm or more: other
- 7208.25.020(1)Having a minimum yield point of 355 MPa
- 7208.25.030Of a thickness of 4.75 mm or more: other, (2)Other
- 7208.26.011High tensile steel of a tensile strength of 490 MPa or more
- 7208.26.019Of a thickness of 3 mm or more but less than 4.75 mm: other
- 7208.26.021(1)Having a minimum yield point of 355 MPa
- 7208.26.029Of a thickness of 3 mm or more but less than 4.75 mm: other, (2)Other
- 7208.27.011High tensile steel of a tensile strength of 490 MPa or more
- 7208.27.019Of a thickness of less than 3 mm: other
- 7208.27.021(1)Having a minimum yield point of 275 MPa
- 7208.27.029Of a thickness of less than 3 mm: other, (2)Other
- 7208.36.0101 Containing by weight less than 0.6% of carbon
- 7208.36.021(1)Having a minimum yield point of 355 MPa
- 7208.36.0291 Containing by weight less than 0.6% of carbon: (2)Other
- 7208.37.011Of a thickness of less than 6 mm
- 7208.37.019Of a thickness of 4.75 mm or more but not exceeding 10 mm: other
- 7208.37.020(1)Having a minimum yield point of 355 MPa
- 7208.37.030Of a thickness of 4.75 mm or more but not exceeding 10 mm: other, (2)Other
- 7208.38.0101 Containing by weight less than 0.6% of carbon
- 7208.38.021(1)Having a minimum yield point of 355 MPa
- 7208.38.0291 Containing by weight less than 0.6% of carbon: (2)Other
- 7208.39.0101 Containing by weight less than 0.6 % of carbon
- 7208.39.021(1)Having a minimum yield point of 275 MPa
- 7208.39.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7208.40.0101 Containing by weight less than 0.6 % of carbon
- 7208.40.020(1)Of a thickness of less than of 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
- 7208.40.0301 Containing by weight less than 0.6 % of carbon: (2)Other
- 7208.51.011Of a thickness of not exceeding 50 mm
- 7208.51.019Of a thickness exceeding 50 mm
- 7208.51.021Of a thickness of not exceeding 50 mm
- 7208.51.029Of a thickness exceeding 50 mm
- 7208.51.030Of a thickness exceeding 50 mm: (2)Other
- 7208.52.011Of a thickness of less than 6 mm
- 7208.52.019Of a thickness of 4.75 mm or more but not exceeding 10 mm: other
- 7208.52.020(1)Having a minimum yield point of 355 MPa
- 7208.52.031Of a thickness of less than 6 mm
- 7208.52.039Of a thickness of 4.75 mm or more but not exceeding 10 mm: other
- 7208.53.0101 Containing by weight less than 0.6 % of carbon
- 7208.53.021(1)Having a minimum yield point of 355 MPa
- 7208.53.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7208.54.0101 Containing by weight less than 0.6 % of carbon
- 7208.54.021(1)Having a minimum yield point of 275 MPa
- 7208.54.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7208.90.000Flat-rolled products of iron or non-alloy steel, of a width: other
7209 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, so šírkou 600 mm alebo viac, valcované za studena (úberom za studena), neplátované, nepokovované alebo nepotiahnuté
- 7209.15.0101 Containing by weight less than 0.6 % of carbon
- 7209.15.021(1)Having a minimum yield point of 355 MPa
- 7209.15.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7209.16.011High tensile steel of a tensile strength of 340 MPa or more
- 7209.16.019Of a thickness exceeding 1mm but less than 3 mm: other
- 7209.16.021(1)Having a minimum yield point of 275 MPa
- 7209.16.029Of a thickness exceeding 1mm but less than 3 mm: other, (2)Other
- 7209.17.011High tensile steel of a tensile strength of 340 MPa or more
- 7209.17.019Of a thickness of 0.5 mm or more but not exceeding 1 mm: other
- 7209.17.021(1)Having a minimum yield point of 275 MPa
- 7209.17.029Of a thickness of 0.5 mm or more but not exceeding 1 mm: other, (2)Other
- 7209.18.0101 Containing by weight less than 0.6 % of carbon
- 7209.18.021(1)Having a minimum yield point of 275 MPa
- 7209.18.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7209.25.0101 Containing by weight less than 0.6 % of carbon
- 7209.25.021(1)Having a minimum yield point of 355 MPa
- 7209.25.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7209.26.0101 Containing by weight less than 0.6 % of carbon
- 7209.26.021(1)Having a minimum yield point of 275 MPa
- 7209.26.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7209.27.0101 Containing by weight less than 0.6 % of carbon
- 7209.27.021(1)Having a minimum yield point of 275 MPa
- 7209.27.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7209.28.0101 Containing by weight less than 0.6 % of carbon
- 7209.28.021(1)Having a minimum yield point of 275 MPa
- 7209.28.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7209.90.000Flat-rolled products of iron or non-alloy steel, of a width: other
7210 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, v šírke 600 mm alebo viac, plátované, pokovované alebo potiahnuté
- 7210.11.000Of a thickness of 0.5 mm or more
- 7210.12.000Of a thickness of less than 0.5 mm
- 7210.20.000Plated or coated with lead, including terne-plate
- 7210.30.0101 Containing by weight less than 0.6% of carbon
- 7210.30.021(1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
- 7210.30.0291 Containing by weight less than 0.6% of carbon: (2)Other
- 7210.41.000Electrolytically plated or coated with zinc: corrugated
- 7210.49.010Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers)
- 7210.49.030Falling under Article 1, paragraph (1), item (i), (a) of Cabinet Order relating to the imposition of a provisional anti-dumping duty on Hot-dipped galvanized steel coil, sheet and strip (Cabinet Order No. 254 of 2026), other than those of subheading 7212.30
- 7210.49.021Containing by weight 5.0 % or more but not more than 13.0 % of aluminium in the plated or coated layers and 2.0 % or more but not more than 4.0 % of magnesium in the plated or coated layers
- 7210.49.029Electrolytically plated or coated with zinc: other
- 7210.50.010Flat-rolled products of iron or non-alloy steel, of a width: tinfree steel
- 7210.50.090Flat-rolled products of iron or non-alloy steel, of a width: other
- 7210.61.000Plated or coated with aluminium-zinc alloys
- 7210.69.000Flat-rolled products of iron or non-alloy steel, of a width: other
- 7210.70.000Painted, varnished or coated with plastics
- 7210.90.0101 Containing by weight less than 0.6 % of carbon
- 7210.90.020Flat-rolled products of iron or non-alloy steel, of a width: other, 2 Other
7211 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, so šírkou menej ako 600 mm, neplátované, nepokovované alebo nepotiahnuté
- 7211.13.0101 Containing by weight less than 0.6 % of carbon
- 7211.13.021(1)Having a minimum yield point of 355 MPa
- 7211.13.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7211.14.0101 Containing by weight less than 0.6 % of carbon
- 7211.14.021(1)Having a minimum yield point of 355 MPa
- 7211.14.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7211.19.0101 Containing by weight less than 0.6 % of carbon
- 7211.19.021(1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
- 7211.19.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7211.23.000Containing by weight less than 0.25 % of carbon
- 7211.29.0101 Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
- 7211.29.090Flat-rolled products of iron or non-alloy steel, of a width: other, 2 Other
- 7211.90.000Flat-rolled products of iron or non-alloy steel, of a width: other
7212 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, so šírkou menej ako 600 mm, plátované, pokovované alebo potiahnuté
- 7212.10.000Plated or coated with tin
- 7212.20.0101 Containing by weight less than 0.6 % of carbon
- 7212.20.021(1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
- 7212.20.0291 Containing by weight less than 0.6 % of carbon: (2)Other
- 7212.30.020Falling under Article 1, paragraph (1), item (i), (a) of Cabinet Order relating to the imposition of a provisional anti-dumping duty on Hot-dipped galvanized steel coil, sheet and strip, other than those of subheading 7210.49
- 7212.30.010Containing by weight 5.0 % or more but not more than 13.0 % of aluminium in the plated or coated layers and 2.0 % or more but not more than 4.0 % of magnesium in the plated or coated layers
- 7212.30.090Flat-rolled products of iron or non-alloy steel, of a width: other
- 7212.40.000Painted, varnished or coated with plastics
- 7212.50.010Flat-rolled products of iron or non-alloy steel, of a width: tinfree steel
- 7212.50.090Flat-rolled products of iron or non-alloy steel, of a width: other
- 7212.60.0101 Containing by weight less than 0.6 % of carbon
- 7212.60.020Flat-rolled products of iron or non-alloy steel, of a width: clad, 2 Other
7213 Tyče a prúty, valcované za tepla, v nepravidelne navinutých zvitkoch, zo železa alebo z nelegovanej ocele
- 7213.10.000Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7213.20.000Other, of free-cutting steel
- 7213.91.011Measuring less than 6 mm in diameter
- 7213.91.019Of circular cross-section measuring less than 14: other
- 7213.91.020Of circular cross-section measuring less than 14: other
- 7213.91.090Of circular cross-section measuring less than 14: 2 Other
- 7213.99.0201 Containing by weight less than 0.6 % of carbon
- 7213.99.090Other, of free-cutting steel: other, 2 Other
7214 Ostatné tyče a prúty zo železa alebo nelegovanej ocele, neupravené inak ako kovaním za tepla, valcovaním za tepla, ťahaním za tepla alebo pretláčaním za tepla, prípadne po valcovaní ešte krútené
- 7214.10.000Other bars and rods of iron or non-alloy steel, not further: forged
- 7214.20.000Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
- 7214.30.000Other, of free-cutting steel
- 7214.91.0201 Containing by weight less than 0.6 % of carbon
- 7214.91.090Of rectangular (other than square) cross-section: 2 Other
- 7214.99.0201 Containing by weight less than 0.6 % of carbon
- 7214.99.090Other, of free-cutting steel: other, 2 Other
7215 Ostatné tyče a prúty zo železa alebo nelegovanej ocele
- 7215.10.000Of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215.50.010Containing by weight less than 0.25 % of carbon
- 7215.50.019Other, not further worked than cold-formed or cold-finished: other
- 7215.50.090Other, not further worked than cold-formed or cold-finished: 2 Other
- 7215.90.0101 Containing by weight less than 0.6% of carbon
- 7215.90.020Other bars and rods of iron or non-alloy steel: other, 2 Other
7216 Uholníky, tvarovky a profily zo železa alebo z nelegovanej ocele
- 7216.10.000U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.21.000U, I or H sections, not further worked than hot-rolled: l sections
- 7216.22.000U, I or H sections, not further worked than hot-rolled: t sections
- 7216.31.000U, I or H sections, not further worked than hot-rolled: u sections
- 7216.32.000U, I or H sections, not further worked than hot-rolled: i sections
- 7216.33.000U, I or H sections, not further worked than hot-rolled: h sections
- 7216.40.000L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
- 7216.50.000Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
- 7216.61.000Obtained from flat-rolled products
- 7216.69.000Other angles, shapes and sections, not further worked than: other
- 7216.91.000Cold-formed or cold-finished from flat-rolled products
- 7216.99.000Other angles, shapes and sections, not further worked than: other
7217 Drôty zo železa alebo z nelegovanej ocele
- 7217.10.010Containing by weight less than 0.25 % of carbon
- 7217.10.019Not plated or coated, whether or not polished: other
- 7217.10.090Not plated or coated, whether or not polished: 2 Other
- 7217.20.010Of any cross sectional dimension not exceeding 1.5 mm
- 7217.20.011Other, plated or coated with zinc specified in Subheading Note 1 (a) to Chapter 79, of circular or oval cross-section
- 7217.20.019Plated or coated with zinc: other
- 7217.20.090Plated or coated with zinc: other
- 7217.20.099Plated or coated with zinc: 2 Other
- 7217.30.011Solid wire for gas sealed arc welding
- 7217.30.019Plated or coated with other base metals: other
- 7217.30.090Plated or coated with other base metals: other
- 7217.30.099Plated or coated with other base metals: 2 Other
- 7217.90.011Containing by weight less than 0.25 % of carbon
- 7217.90.019Wire of iron or non-alloy steel: other
- 7217.90.090Wire of iron or non-alloy steel: other, 2 Other
7218 Nehrdzavejúca oceľ v ingotoch alebo v ostatných základných tvaroch; polotovary z nehrdzavejúcej ocele
7219 Ploché valcované výrobky z nehrdzavejúcej ocele so šírkou 600 mm alebo viac
- 7219.11.000Of a thickness exceeding 10 mm
- 7219.12.011Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
- 7219.12.027Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
- 7219.12.028Flat-rolled products of stainless steel, of a width of 600: other
- 7219.12.029Flat-rolled products of stainless steel, of a width of 600: other
- 7219.13.011Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
- 7219.13.027Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
- 7219.13.028Flat-rolled products of stainless steel, of a width of 600: other
- 7219.13.029Flat-rolled products of stainless steel, of a width of 600: other
- 7219.14.000Of a thickness of less than 3 mm
- 7219.21.000Of a thickness exceeding 10 mm
- 7219.22.000Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23.000Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.000Of a thickness of less than 3 mm
- 7219.31.010Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
- 7219.31.020Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
- 7219.32.011Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
- 7219.32.027Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
- 7219.32.028Flat-rolled products of stainless steel, of a width of 600: other
- 7219.32.022Containing by weight 7 % or more but less than 10 % of nickel
- 7219.32.023Containing by weight more than 10 % of nickel
- 7219.33.012Containing by weight less than 12 % of chromium
- 7219.33.013Flat-rolled products of stainless steel, of a width of 600: other
- 7219.33.027Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
- 7219.33.028Flat-rolled products of stainless steel, of a width of 600: other
- 7219.33.022Containing by weight 7 % or more but less than 10 % of nickel
- 7219.33.023Containing by weight 10 % or more of nickel
- 7219.34.012Containing by weight less than 12 % of chromium
- 7219.34.013Flat-rolled products of stainless steel, of a width of 600: other
- 7219.34.027Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
- 7219.34.028Flat-rolled products of stainless steel, of a width of 600: other
- 7219.34.022Containing by weight 7 % or more but less than 10 % of nickel
- 7219.34.023Containing by weight 10 % or more of nickel
- 7219.35.011Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
- 7219.35.027Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
- 7219.35.028Flat-rolled products of stainless steel, of a width of 600: other
- 7219.35.022Containing by weight 7 % or more but less than 10 % of nickel
- 7219.35.023Containing by weight 10 % or more of nickel
- 7219.90.010Cold-rolled (cold-reduced) of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements, not clad, plated or coated, or not worked stated in Article 1, paragraph (1), item (i), (b), 1. or 2. of Cabinet Order relating to the imposition of a provisional anti-dumping duty on Nickel-added cold-rolled stainless steel coil, sheet and strip (Cabinet Order No. 224 of 2026)
- 7219.90.090Flat-rolled products of stainless steel, of a width of 600: other
7220 Ploché valcované výrobky z nehrdzavejúcej ocele so šírkou menej ako 600 mm
- 7220.11.000Of a thickness of 4.75 mm or more
- 7220.12.000Of a thickness of less than 4.75 mm
- 7220.20.011Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
- 7220.20.027Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
- 7220.20.028Flat-rolled products of stainless steel, of a width of less: other
- 7220.20.029Flat-rolled products of stainless steel, of a width of less: other
- 7220.90.010Cold-rolled (cold-reduced) of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements, not clad, plated or coated, or not worked stated in Article 1, paragraph (1), item (i), (b), 1. or 2. of Cabinet Order relating to the imposition of a provisional anti-dumping duty on Nickel-added cold-rolled stainless steel coil, sheet and strip
- 7220.90.090Flat-rolled products of stainless steel, of a width of less: other
7221 Tyče a prúty, valcované za tepla, v nepravidelne navinutých zvitkoch, z nehrdzavejúcej ocele
7222 Ostatné tyče a prúty z nehrdzavejúcej ocele; uholníky, tvarovky a profily z nehrdzavejúcej ocele
7223 Drôty z nehrdzavejúcej ocele
7224 Ostatná legovaná oceľ v ingotoch alebo v ostatných základných tvaroch; polotovary z ostatnej legovanej ocele
- 7224.10.0101 Of high speed steel
- 7224.10.0202 Of alloy tool steel, containing by weight not less than 0.5 %, separately or together, of tungsten or molybdenum
- 7224.10.030Ingots and other primary forms: 3 Other
- 7224.90.0101 Of high speed steel
- 7224.90.0202 Of alloy tool steel
- 7224.90.030Other alloy steel in ingots or other primary forms: other, 3 Other
7225 Ploché valcované výrobky z ostatnej legovanej ocele, so šírkou 600 mm alebo viac
- 7225.11.000Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7225.19.010Of a thickness of less than 0.35 mm, containing by weight 3.0 % or more of silicon
- 7225.19.090Flat-rolled products of other alloy steel, of a width: other
- 7225.30.1001 Of alloy tool steel
- 7225.30.2002 Of high speed steel
- 7225.30.910Other, not further worked than hot-rolled, in coils: pickled
- 7225.30.990Other, not further worked than hot-rolled, in coils: other
- 7225.40.1001 Of alloy tool steel
- 7225.40.2002 Of high speed steel
- 7225.40.910Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter
- 7225.40.990Other, not further worked than hot-rolled, not in coils: other
- 7225.50.1001 Of alloy tool steel
- 7225.50.2002 Of high speed steel
- 7225.50.900Other, not further worked than cold-rolled (cold-reduced): 3 Other
- 7225.91.1001 Bimetal, clad or combined, containing by weight more than 10 % of nickel
- 7225.91.2002 Of alloy tool steel
- 7225.91.3003 Of high speed steel
- 7225.91.900Electrolytically plated or coated with zinc: 4 Other
- 7225.92.1001 Bimetal, clad or combined, containing by weight more than 10 % of nickel
- 7225.92.2002 Of alloy tool steel
- 7225.92.3003 Of high speed steel
- 7225.92.910Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers)
- 7225.92.930Falling under Article 1, paragraph (1), item (i), (b) of Cabinet Order relating to the imposition of a provisional anti-dumping duty on Hot-dipped galvanized steel coil, sheet and strip, other than those of subheading 7226.99
- 7225.92.921Containing by weight 5.0 % or more but not more than 13.0 % of aluminium in the plated or coated layers and 2.0 % or more but not more than 4.0 % of magnesium in the plated or coated layers
- 7225.92.929Otherwise plated or coated with zinc: other
- 7225.99.1001 Bimetal, clad or combined, containing by weight more than 10 % of nickel
- 7225.99.2002 Of alloy tool steel
- 7225.99.3003 Of high speed steel
- 7225.99.900Other, not further worked than cold-rolled (cold-reduced): other, 4 Other
7226 Ploché valcované výrobky z ostatnej legovanej ocele, so šírkou menej ako 600 mm
- 7226.11.000Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7226.19.010Of a thickness of less than 0.35 mm, containing by weight 3.0 % or more of silicon
- 7226.19.090Flat-rolled products of other alloy steel, of a width: other
- 7226.20.000Of high speed steel
- 7226.91.0101 Of alloy tool steel
- 7226.91.020Not further worked than hot-rolled: 2 Other
- 7226.92.0101 Of alloy tool steel
- 7226.92.020Not further worked than cold-rolled (cold-reduced): 2 Other
- 7226.99.110Plated or coated with zinc
- 7226.99.190Of high speed steel: other
- 7226.99.2002 Of alloy tool steel
- 7226.99.912Falling under Article 1, paragraph (1), item (i), (b) of Cabinet Order relating to the imposition of a provisional anti-dumping duty on Hot-dipped galvanized steel coil, sheet and strip, other than those of subheading 7225.92
- 7226.99.911Containing by weight 5.0 % or more but not more than 13.0 % of aluminium in the plated or coated layers and 2.0 % or more but not more than 4.0 % of magnesium in the plated or coated layers
- 7226.99.919Of high speed steel: other
- 7226.99.990Of high speed steel: other
7227 Tyče a prúty, valcované za tepla, v nepravidelne navinutých zvitkoch, z ostatnej legovanej ocele
- 7227.10.000Of high speed steel
- 7227.20.000Bars and rods, hot-rolled, in irregularly wound coils: of silico-manganese steel
- 7227.90.0101 Of alloy tool steel
- 7227.90.021Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter
- 7227.90.029Bars and rods, hot-rolled, in irregularly wound coils: other
7228 Ostatné tyče a prúty z ostatnej legovanej ocele; uholníky, tvarovky a profily z ostatnej legovanej ocele; duté vrtné tyče a prúty, z legovanej alebo nelegovanej ocele
- 7228.10.000Bars and rods, of high speed steel
- 7228.20.000Bars and rods, of silico-manganese steel
- 7228.30.0101 Of alloy tool steel
- 7228.30.020Other bars and rods, not further worked than hot-rolled: 2 Other
- 7228.40.0101 Of alloy tool steel
- 7228.40.020Other bars and rods, not further worked than forged: 2 Other
- 7228.50.0101 Of alloy tool steel
- 7228.50.020Other bars and rods, not further worked than cold-formed: 2 Other
- 7228.60.0101 Of alloy tool steel
- 7228.60.020Other bars and rods: 2 Other
- 7228.70.0101 Of alloy tool steel
- 7228.70.020Angles, shapes and sections: 2 Other
- 7228.80.000Hollow drill bars and rods
7229 Drôty z ostatnej legovanej ocele
- 7229.20.000Wire of other alloy steel: of silico-manganese steel
- 7229.90.1001 Of alloy tool steel
- 7229.90.2002 Of high speed steel
- 7229.90.910Solid wire for gas sealed arc welding
- 7229.90.920－Plated or coated with zinc specified in Subheading Note 1 (a) to Chapter 79, containing by weight 0.0008% or more but not exceeding 0.007% of boron, less than proportions of elements other than boron listed in Note 1 (f) to this Chapter, less than 0.25% of carbon, of circular or oval cross-section, of any cross sectional dimension exceeding 1.5mm
- 7229.90.990Wire of other alloy steel: other