Nórsky colný sadzobník (Tolltariffen)
Nórsky colný sadzobník (Tolltariffen), kapitola 72: Železo a oceľ
- 169Kódy tovaru
- Bez claSadzba
Nórsky colný sadzobník (Tolltariffen) má v kapitole 72 169 kódov v 29 položkách.
Sadzby: bez cla; bez cla: 169 kódov.
Najviac kódov má položka 7202, ferozliatiny: celkovo 15.
Najčastejšia sadzba: bez cla, pri 169 kódoch.
7201 Surové železo a vysokopecná zrkadlovina v bochníkoch, v blokoch alebo ostatných základných tvaroch
7202 Ferozliatiny
- 7202.11.00Containing by weight more than 2 % of carbon
- 7202.19.00Ferro-alloys, other
- 7202.21.00Containing by weight more than 55 % of silicon
- 7202.29.00Ferro-alloys, other
- 7202.30.00Ferro-alloys, ferro-silico-manganese
- 7202.41.00Containing by weight more than 4 % of carbon
- 7202.49.00Ferro-alloys, ferro-silico-manganese, other
- 7202.50.00Ferro-alloys, ferro-silico-chromium
- 7202.60.00Ferro-alloys, ferro-nickel
- 7202.70.00Ferro-alloys, ferro-molybdenum
- 7202.80.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten
- 7202.91.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-titanium and ferro-silico-titanium
- 7202.92.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-vanadium
- 7202.93.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-niobium
- 7202.99.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other
7203 Výrobky zo železa získané priamou redukciou železnej rudy a ostatné hubovité železo, v kusoch, v peletách alebo podobných tvaroch; železo, ktorého rýdzosť je najmenej 99,94 hmotnostných %, v kusoch, peletách alebo podobných tvaroch
7204 Železný a oceľový odpad a šrot; pretavený odpad zo železa alebo ocele v ingotoch
- 7204.10.00Waste and scrap of cast iron
- 7204.21.00Waste and scrap of cast iron: of stainless steel
- 7204.29.00Waste and scrap of cast iron: other
- 7204.30.00Waste and scrap of tinned iron or steel
- 7204.41.00Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
- 7204.49.00Waste and scrap of tinned iron or steel: other
- 7204.50.00Ferrous waste and scrap: remelting scrap ingots
7205 Granuly a prášok, zo surového železa, vysokopecnej zrkadloviny, železa alebo ocele
7206 Železo a nelegovaná oceľ v ingotoch alebo ostatných základných tvaroch (okrem železa položky 7203)
7207 Polotovary zo železa alebo z nelegovanej ocele
7208 Ploché valcované výrobky zo železa alebo nelegovanej ocele, so šírkou 600 mm alebo viac, valcované za tepla, neplátované, nepokovované alebo nepotiahnuté
- 7208.10.00In coils, not further worked than hot-rolled, with patterns in relief
- 7208.25.00Of a thickness of 4.75 mm or more
- 7208.26.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27.00Of a thickness of less than 3 mm
- 7208.36.00Of a thickness exceeding 10 mm
- 7208.37.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.38.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.39.00Of a thickness of less than 3 mm
- 7208.40.00Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.51.00Of a thickness exceeding 10 mm
- 7208.52.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.53.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54.00Of a thickness of less than 3 mm
- 7208.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7209 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, so šírkou 600 mm alebo viac, valcované za studena (úberom za studena), neplátované, nepokovované alebo nepotiahnuté
- 7209.15.00Of a thickness of 3 mm or more
- 7209.16.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.17.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.18.00Of a thickness of less than 0.5 mm
- 7209.25.00Of a thickness of 3 mm or more
- 7209.26.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.27.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.28.00Of a thickness of less than 0.5 mm
- 7209.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7210 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, v šírke 600 mm alebo viac, plátované, pokovované alebo potiahnuté
- 7210.11.00Of a thickness of 0.5 mm or more
- 7210.12.00Of a thickness of less than 0.5 mm
- 7210.20.00Plated or coated with lead, including terne-plate
- 7210.30.00Electrolytically plated or coated with zinc
- 7210.41.00Electrolytically plated or coated with zinc: corrugated
- 7210.49.00Electrolytically plated or coated with zinc: other
- 7210.50.00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61.00Plated or coated with aluminium-zinc alloys
- 7210.69.00Plated or coated with chromium oxides or with chromium: other
- 7210.70.00Painted, varnished or coated with plastics
- 7210.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7211 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, so šírkou menej ako 600 mm, neplátované, nepokovované alebo nepotiahnuté
- 7211.13.00Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- 7211.14.00Other, of a thickness of 4.75 mm or more
- 7211.19.00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211.23.00Containing by weight less than 0.25 % of carbon
- 7211.29.00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7212 Ploché valcované výrobky zo železa alebo z nelegovanej ocele, so šírkou menej ako 600 mm, plátované, pokovované alebo potiahnuté
7213 Tyče a prúty, valcované za tepla, v nepravidelne navinutých zvitkoch, zo železa alebo z nelegovanej ocele
7214 Ostatné tyče a prúty zo železa alebo nelegovanej ocele, neupravené inak ako kovaním za tepla, valcovaním za tepla, ťahaním za tepla alebo pretláčaním za tepla, prípadne po valcovaní ešte krútené
- 7214.10.00Other bars and rods of iron or non-alloy steel, not further: forged
- 7214.20.00Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
- 7214.30.00Other, of free-cutting steel
- 7214.91.00Of rectangular (other than square) cross-section
- 7214.99.00Other, of free-cutting steel: other
7215 Ostatné tyče a prúty zo železa alebo nelegovanej ocele
7216 Uholníky, tvarovky a profily zo železa alebo z nelegovanej ocele
- 7216.10.00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.21.00U, I or H sections, not further worked than hot-rolled: l sections
- 7216.22.00U, I or H sections, not further worked than hot-rolled: t sections
- 7216.31.00U, I or H sections, not further worked than hot-rolled: u sections
- 7216.32.00U, I or H sections, not further worked than hot-rolled: i sections
- 7216.33.00U, I or H sections, not further worked than hot-rolled: h sections
- 7216.40.00L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
- 7216.50.00Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
- 7216.61.00Obtained from flat-rolled products
- 7216.69.00Other angles, shapes and sections, not further worked than: other
- 7216.91.00Cold-formed or cold-finished from flat-rolled products
- 7216.99.00Other angles, shapes and sections, not further worked than: other
7217 Drôty zo železa alebo z nelegovanej ocele
7218 Nehrdzavejúca oceľ v ingotoch alebo v ostatných základných tvaroch; polotovary z nehrdzavejúcej ocele
7219 Ploché valcované výrobky z nehrdzavejúcej ocele so šírkou 600 mm alebo viac
- 7219.11.00Of a thickness exceeding 10 mm
- 7219.12.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.00Of a thickness of less than 3 mm
- 7219.21.00Of a thickness exceeding 10 mm
- 7219.22.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.00Of a thickness of less than 3 mm
- 7219.31.00Of a thickness of 4.75 mm or more
- 7219.32.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.33.00Of a thickness exceeding 1 mm but less than 3 mm
- 7219.34.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7219.35.00Of a thickness of less than 0.5 mm
- 7219.90.00Flat-rolled products of stainless steel, of a width of 600: other
7220 Ploché valcované výrobky z nehrdzavejúcej ocele so šírkou menej ako 600 mm
7221 Tyče a prúty, valcované za tepla, v nepravidelne navinutých zvitkoch, z nehrdzavejúcej ocele
7222 Ostatné tyče a prúty z nehrdzavejúcej ocele; uholníky, tvarovky a profily z nehrdzavejúcej ocele
7223 Drôty z nehrdzavejúcej ocele
7224 Ostatná legovaná oceľ v ingotoch alebo v ostatných základných tvaroch; polotovary z ostatnej legovanej ocele
7225 Ploché valcované výrobky z ostatnej legovanej ocele, so šírkou 600 mm alebo viac
- 7225.11.00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7225.19.00Flat-rolled products of other alloy steel, of a width: other
- 7225.30.00Other, not further worked than hot-rolled, in coils
- 7225.40.00Other, not further worked than hot-rolled, not in coils
- 7225.50.00Other, not further worked than cold-rolled (cold-reduced)
- 7225.91.00Electrolytically plated or coated with zinc
- 7225.92.00Otherwise plated or coated with zinc
- 7225.99.00Other, not further worked than cold-rolled (cold-reduced): other
7226 Ploché valcované výrobky z ostatnej legovanej ocele, so šírkou menej ako 600 mm
- 7226.11.00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7226.19.00Flat-rolled products of other alloy steel, of a width: other
- 7226.20.00Of high speed steel
- 7226.91.00Not further worked than hot-rolled
- 7226.92.00Not further worked than cold-rolled (cold-reduced)
- 7226.99.00Of high speed steel: other
7227 Tyče a prúty, valcované za tepla, v nepravidelne navinutých zvitkoch, z ostatnej legovanej ocele
7228 Ostatné tyče a prúty z ostatnej legovanej ocele; uholníky, tvarovky a profily z ostatnej legovanej ocele; duté vrtné tyče a prúty, z legovanej alebo nelegovanej ocele
- 7228.10.00Bars and rods, of high speed steel
- 7228.20.00Bars and rods, of silico-manganese steel
- 7228.30.00Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
- 7228.40.00Other bars and rods, not further worked than forged
- 7228.50.00Other bars and rods, not further worked than cold-formed or cold-finished
- 7228.60.00Other bars and rods
- 7228.70.00Angles, shapes and sections
- 7228.80.10Of alloy steel or high carbon steel
- 7228.80.90Hollow drill bars and rods: other