Carinska tarifa Združenega kraljestva · blagovna oznaka UK · HS 8708.50
8708 50 55 91: Pogonske osi z diferencialom in druge osi: Specific pre-assembled or ready-to assemble sections for new mobile cranes
Pogonske osi z diferencialom in druge osi
✓ Uporabna v carinski deklaraciji Podatki: Carinska tarifa Združenega kraljestva · preverjeno 24. oktober 2026
Ta oznaka nima uradnega besedila v slovenščini; prikazana je v jeziku svoje tarife.
- 8708 Parts and accessories of the motor vehicles of headings 8701 to 8705
- 8708 50 00 00 Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof
- Other
- Parts
- 8708 50 55 00 Of closed-die forged steel
- Other
- 8708 50 55 91 Specific pre-assembled or ready-to assemble sections for new mobile cranes
Koliko boste plačali
Uvoz: Združeno kraljestvo
Dodatne dajatve in uvozni pogoji
Dajatve poleg carine in pogoji, ki jih mora blago izpolnjevati na meji.
Dodatne dajatve in pristojbine 1
- Dodatna dajatevDodatne carine 35 %
- Velja za države porekla
- Belorusija, Rusija
- Pravni akt
- 2022 No. 598
- Dokumenti
- 9014
Uvozni pogoji 5
- Prepoved ali omejitevPrepoved uvoza
- Velja za države porekla
- Severna Koreja
- Pravni akt
- S.I. 2019/411
- Uvozni nadzorOmejitev vstopa v prosti promet
- Velja za države porekla
- Belorusija, Irak, Rusija, Sirija, Ukrajina
- Pravni akt
- 2022 No. 748, S.I. 2020/707, S.I. 2019/792, S.I. 2022/395
- Dokumenti
- 9024
- 9032
- 9025
- 9009
- 9010
- 9017
- Uvozni nadzorOmejitev vstopa v prosti promet
- Velja za države porekla
- vse države
- Pravni akt
- S.I. 2019/583
- Dokumenti
- L100 Uvozno dovoljenje za nadzorovane snovi (ozon), ki ga izda Komisija
- Y902
- 9Y06
- Uvozni nadzorNadzor uvoza blaga in tehnologije z omejitvami
- Velja za države porekla
- Iran, Libija, Rusija
- Pravni akt
- S.I. 2019/461, 2020 No. 1665, S.I. 2019/855
- Uvozni nadzorNadzor uvoza luksuznega blaga
- Velja za države porekla
- Severna Koreja
- Pravni akt
- S.I. 2019/411
- Dokumenti
- Y945 Osebni predmeti potnikov ali blago nekomercialne narave, za osebno rabo potnikov, vsebovano v njihovi prtljagi (člen 10(2) Uredbe (EU) 2017/1509)
- Y946 Blago, potrebno za uradne naloge diplomatskega ali konzularnega predstavništva držav članic v DLRK ali mednarodne organizacije, ki imajo imuniteto v skladu z mednarodnim pravom, ali za osebno uporabo njihovega osebja (člen 10(3) Uredbe (EU) 2017/1509)
- Y948 Blago, razen blaga, ki je opisano v Prilogi VIII (Luksuzno blago) Uredbe (EU) 2017/1509
Preferencialne stopnje po državah
| Sporazum ali shema | Države | Stopnja |
|---|---|---|
| standardna stopnja (brez sporazuma) | — | 4 % |
| DCTS Comprehensive | Afganistan, Angola, Bangladeš, Benin in še 38Afganistan, Angola, Bangladeš, Benin, Burkina Faso, Burundi, Butan, Čad, Demokratična republika Kongo, Džibuti, Eritreja, Etiopija, Gambija, Gvineja, Gvineja Bissau, Haiti, Jemen, Južni Sudan, Kambodža, Kiribati, Komori, Laos, Liberija, Malavi, Mali, Mavretanija, Mjanmar (Burma), Nepal, Niger, Ruanda, Senegal, Sierra Leone, Somalija, Srednjeafriška republika, Sudan, Sveti Tomaž in Princ, Tanzanija, Timor-Leste, Togo, Tuvalu, Uganda, Zambija | Brez carine |
| Evropska unija (vključno s šifro "EU") | Brez carine | |
| DCTS Enhanced | Alžirija, Bolivija, Cookovi otoki, Filipini in še 13Alžirija, Bolivija, Cookovi otoki, Filipini, Kirgizistan, Kongo - Brazzaville, Mikronezija, Mongolija, Nigerija, Niue, Pakistan, Sirija, Šrilanka, Tadžikistan, Uzbekistan, Vanuatu, Zelenortski otoki | Brez carine |
| CARIFORUM | Antigva in Barbuda, Bahami, Barbados, Belize in še 10Antigva in Barbuda, Bahami, Barbados, Belize, Dominika, Dominikanska republika, Grenada, Gvajana, Jamajka, Surinam, Sveta Lucija, Sveti Krištof in Nevis, Sveti Vincencij in Grenadine, Trinidad in Tobago | Brez carine |
| OČD (Čezmorske države in ozemlja) | Angvila, Bermudi, Britanski Deviški otoki, Britansko ozemlje v Indijskem oceanu in še 7Angvila, Bermudi, Britanski Deviški otoki, Britansko ozemlje v Indijskem oceanu, Falklandski otoki, Južna Georgia in Južni Sandwichevi otoki, Kajmanji otoki, Montserrat, Otoki Turks in Caicos, Pitcairn, Sveta Helena | Brez carine |
| Srednja Amerika | Gvatemala, Honduras, Kostarika, Nikaragva, Panama, Salvador | Brez carine |
| SADC EPA | Bocvana, Esvatini, Lesoto, Mozambik, Namibija | Brez carine |
| Državi Vzhodne in Južne Afrike | Madagaskar, Mavricij, Sejšeli, Zimbabve | Brez carine |
| CPTPP | Brunej, Malezija | Brez carine |
| sporazum Združeno kraljestvo–Andora | Andora | Brez carine |
| sporazum Združeno kraljestvo–Albanija | Albanija | Brez carine |
| sporazum Združeno kraljestvo–Avstralija | Avstralija | Brez carine |
| sporazum Združeno kraljestvo–Kanada | Kanada | Brez carine |
| sporazum Združeno kraljestvo–Švica | Švica | Brez carine |
| sporazum Združeno kraljestvo–Slonokoščena obala | Slonokoščena obala | Brez carine |
| sporazum Združeno kraljestvo–Čile | Čile | Brez carine |
| sporazum Združeno kraljestvo–Kamerun | Kamerun | Brez carine |
| sporazum Združeno kraljestvo–Kolumbija | Kolumbija | Brez carine |
| sporazum Združeno kraljestvo–Ceuta in Melilla | Ceuta in Melilla | Brez carine |
| sporazum Združeno kraljestvo–Ekvador | Ekvador | Brez carine |
| sporazum Združeno kraljestvo–Egipt | Egipt | Brez carine |
| sporazum Združeno kraljestvo–Fidži | Fidži | Brez carine |
| sporazum Združeno kraljestvo–Ferski otoki | Ferski otoki | Brez carine |
| sporazum Združeno kraljestvo–Gruzija | Gruzija | Brez carine |
| sporazum Združeno kraljestvo–Gana | Gana | Brez carine |
| DCTS Standard | Indonezija | Brez carine |
| sporazum Združeno kraljestvo–Izrael | Izrael | Brez carine |
| sporazum Združeno kraljestvo–Indija | Indija | Brez carine |
| sporazum Združeno kraljestvo–Islandija | Islandija | Brez carine |
| sporazum Združeno kraljestvo–Jordanija | Jordanija | Brez carine |
| sporazum Združeno kraljestvo–Japonska | Japonska | Brez carine |
| sporazum Združeno kraljestvo–Kenija | Kenija | Brez carine |
| sporazum Združeno kraljestvo–Južna Koreja | Južna Koreja | Brez carine |
| sporazum Združeno kraljestvo–Libanon | Libanon | Brez carine |
| sporazum Združeno kraljestvo–Lihtenštajn | Lihtenštajn | Brez carine |
| sporazum Združeno kraljestvo–Maroko | Maroko | Brez carine |
| sporazum Združeno kraljestvo–Moldavija | Moldavija | Brez carine |
| sporazum Združeno kraljestvo–Severna Makedonija | Severna Makedonija | Brez carine |
| sporazum Združeno kraljestvo–Mehika | Mehika | Brez carine |
| sporazum Združeno kraljestvo–Norveška | Norveška | Brez carine |
| sporazum Združeno kraljestvo–Nova Zelandija | Nova Zelandija | Brez carine |
| sporazum Združeno kraljestvo–Peru | Peru | Brez carine |
| sporazum Združeno kraljestvo–Papua Nova Gvineja | Papua Nova Gvineja | Brez carine |
| sporazum Združeno kraljestvo–Palestinsko ozemlje | Palestinsko ozemlje | Brez carine |
| sporazum Združeno kraljestvo–Srbija | Srbija | Brez carine |
| sporazum Združeno kraljestvo–Salomonovi otoki | Salomonovi otoki | Brez carine |
| sporazum Združeno kraljestvo–Singapur | Singapur | Brez carine |
| sporazum Združeno kraljestvo–San Marino | San Marino | Brez carine |
| sporazum Združeno kraljestvo–Tunizija | Tunizija | Brez carine |
| sporazum Združeno kraljestvo–Turčija | Turčija | Brez carine |
| sporazum Združeno kraljestvo–Ukrajina | Ukrajina | Brez carine |
| sporazum Združeno kraljestvo–Vietnam | Vietnam | Brez carine |
| sporazum Združeno kraljestvo–Samoa | Samoa | Brez carine |
| sporazum Združeno kraljestvo–Kosovo | Kosovo | Brez carine |
| sporazum Združeno kraljestvo–Južnoafriška republika | Južnoafriška republika | Brez carine |
Opombe
TN200 The export of these items may be controlled under the Export Control Order 2008 as amended…
TN207 The Democratic People’s Republic of Korea (Sanctions) (EU Exit) Regulations 2019 impose tr…
TN701 According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9), as retained in UK La…
The prohibition shall not apply in respect of:
(a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established.
(b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014, as retained in UK Law, or in accordance with the EU-Ukraine Association Agreement
Združeno kraljestvo: mesečni uvoz · HS 8708.50
Glavni dobavitelji, zadnjih 12 mesecev
| Država | Vrednost | Delež | Sprememba |
|---|---|---|---|
| 249,2 mio. GBP | 28,3 % | +26,9 % | |
| 101,5 mio. GBP | 11,5 % | −9,6 % | |
| 98,2 mio. GBP | 11,1 % | +9,7 % | |
| 76,2 mio. GBP | 8,6 % | −13,8 % | |
| 72,3 mio. GBP | 8,2 % | +14,3 % | |
| 57,7 mio. GBP | 6,5 % | +32,6 % | |
| 50 mio. GBP | 5,7 % | +23 % | |
| 36,1 mio. GBP | 4,1 % | +36,2 % |
Ista tarifna podštevilka v drugih tarifah
Oznake – Združeno kraljestvo: 8708.50
- 8708 50 20 15Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened
- 8708 50 20 18Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1.4 m or more but not more than 2.4 m, for use in the production of goods of chapter 87
- 8708 50 20 20Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
- 8708 50 20 25Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%, -forged, turned, milled and hardened
- 8708 50 20 35Inboard constant velocity joint tripod housing, with: -an outer diameter of 67.0 mm or more but not more than 99.0 mm, -3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
- 8708 50 20 50Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 20 55Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm, -forged, turned, broached and hardened
- 8708 50 20 70Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67.0 mm or more but not more than 84.5 mm, -3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm, - sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves
- 8708 50 20 75Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13.0mm or more but not more than 28.0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
- 8708 50 20 80Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 20 90For the industrial assembly of: other
- 8708 50 35 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 35 90Drive-axles with differential, whether or not provided with: other
- 8708 50 55 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 55 20Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 55 50Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened
- 8708 50 55 91Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 55 99Of closed-die forged steel: other
- 8708 50 91 10Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 91 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 91 90Drive-axles with differential, whether or not provided with: other, parts, other, for non-driving axles, other
- 8708 50 99 10Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
- 8708 50 99 25Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67.0 mm or more but not more than 84.5 mm, -3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm, - sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves
- 8708 50 99 35Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13.0mm or more but not more than 28.0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
- 8708 50 99 40Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 99 45Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%, -forged, turned, milled and hardened
- 8708 50 99 50Inboard constant velocity joint tripod housing, with: -an outer diameter of 67.0 mm or more but not more than 99.0 mm, -3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
- 8708 50 99 60Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm, -forged, turned, broached and hardened
- 8708 50 99 70Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 99 90Drive-axles with differential, whether or not provided with: other, parts, other
Zavezujoče odločbe za podobno blago
Odločbe carinske uprave ZDA (CBP, CROSS) in britanske HMRC (Advance Tariff Rulings) o blagu, uvrščenem sem. Odločba zavezuje le imetnika, vendar kaže, kako organi uvrščajo podobno blago. Opisi so angleška besedila organov.
- N364933 U.S. CBP
The tariff classification of an automotive shim from South Korea
- N344019 U.S. CBP
The tariff classification of power train flanges from Japan
- N342419 U.S. CBP
The tariff classification of differential components from China
- N336861 U.S. CBP
The tariff classification and country of origin of half-shafts
- 600015867 HMRC
This is a third generation double angular contact flanged bearing used on the non-driving axles of motor vehicles. It contains an outer ring, inner ring, inner shaft, 22-28 steel balls, retainer, pulsar ring and seal. These are all separate finished products that are third generation double…
- 600016887 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
- 600016888 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
- 600015859 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
skupaj odločb za to oznako: 13
Opombe
Opomba k tarifnim podštevilkam
1. Tarifna podštevilka 870822 zajema:
(a) sprednja vetrobranska stekla, zadnja okna in druga okna, uokvirjena; ter
(b) sprednja vetrobranska stekla, zadnja okna in druga okna, uokvirjena ali ne, z vgrajeno napravo za gretje ali drugo električno ali elektronsko napravo,
ki so samo ali zlasti namenjeni za uporabo z vozili iz tar. št. 8701 do 8705.
Carinska tarifa Združenega kraljestva tarifno podštevilko HS 8708.50 (pogonske osi z diferencialom) razdeli na 30 oznak; 8708 50 55 91 je ena izmed njih.
Carina za tretje države: 4 %.
174 držav porekla ima v Združenem kraljestvu namesto standardne stopnje 4 % preferencialno carinsko stopnjo (podlaga: na primer DCTS Comprehensive ali Evropska unija); pri 174 od njih je carina ničelna.
V Združenem kraljestvu se za blago iz držav: Belorusija in Rusija poleg carine uporablja še dodatna dajatev v višini 35 %.
Uvoz blaga tarifne podštevilke HS 8708.50 – pogonske osi z diferencialom in druge osi – v Združeno kraljestvo je v zadnjih 12 mesecih (september 2025 – avgust 2026) znašal 881,9 mio. GBP, kar je 5 % več kot v predhodnih 12 mesecih, povprečna cena je bila 6,57 GBP za kg; največji dobavitelj: Italija (28 %), sledi Nemčija.
Ista tarifna podštevilka v drugih tarifah: EU 3 %–4,5 %; Turčija 3 %–4,5 %; ZDA 0 %–2,5 %; Kanada 0 %–6 %; Mehika 0 %–25 %; Brazilija 7,2 %–18 %; Argentina 0 %–18 %; Peru brez carine; Nova Zelandija 0 %–5 %; Japonska brez carine; Tajvan 2,5 %–15 %; GCC 5 %; Švica brez carine; Norveška brez carine; Severna Makedonija 0 %–15 %; Nigerija 10 %.
Uvoz blaga tarifne podštevilke 8708.50 v Združeno kraljestvo je leta 2024 znašal 1,1 mrd. $; največji dobavitelj: Italija.
Vprašanja in odgovori
Kakšna carina velja za 8708 50 55 91 (blagovna oznaka UK)?
Carinska tarifa Združenega kraljestva navaja: carina za tretje države 4 %. Preferencialne stopnje za blago iz držav s sporazumom, protidampinške dajatve in DDV niso vključeni.
Od kod se to blago uvaža v Združeno kraljestvo?
Največji dobavitelj za celotno tarifno podštevilko 8708.50 v letu 2024: Italija (242 mio. $), na drugem mestu Belgija.
Katere države imajo za 8708 50 55 91 nižjo carinsko stopnjo?
Preferencialno stopnjo ima pri tej oznaki 174 držav porekla, od tega 174 ničelno (podlaga med drugim: DCTS Comprehensive, Evropska unija, DCTS Enhanced). Stopnja velja le za blago, ki izpolnjuje pravila o poreklu sporazuma in ima dokazilo o poreklu. Stopnjo za posamezno državo prikažete z izbiro države porekla na tej strani.
Ali za 8708 50 55 91 velja protidampinška ali druga dodatna dajatev?
Dodatna dajatev v višini 35 % za blago iz držav: Belorusija in Rusija. Te dajatve se zaračunajo poleg carine.