Storbritanniens tulltaxa (UK Global Tariff)
Storbritanniens tulltaxa (UK Global Tariff), kapitel 72: Järn och stål
- 593Varukoder
- 0 %–50 %Tullsats
Kapitel 72 har 593 rader i Storbritanniens tulltaxa (UK Global Tariff), fördelade på 29 nummer.
Tullsatserna ligger mellan 0 % och 50 %, i genomsnitt 23,8 %; 311 rader är tullfria.
Mest detaljerat indelat är nummer 7219 (valsade platta produkter av rostfritt stål, med en bredd av minst 600…) med 57 rader.
Den vanligaste satsen är noll, på 311 rader.
Högst är satsen för 7208 10 00 00 (in coils, not further worked than hot-rolled, with patterns in relief): 50 %.
7201 Tackjärn och spegeljärn i form av tackor eller i andra obearbetade former
- 7201 10 11 10Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm
- 7201 10 11 90Containing by weight 1% or less of silicon: other
- 7201 10 19 00Containing by weight more than 1% of silicon
- 7201 10 30 10Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1% of silicon
- 7201 10 30 90Containing by weight not less than 0.1% but less than 0.4%: other
- 7201 10 90 00Containing by weight less than 0.1% of manganese
- 7201 20 00 00Non-alloy pig iron containing by weight more than 0.5% of phosphorus
- 7201 50 10 00Alloy pig iron containing by weight not less than 0.3% but not more than 1% of titanium and not less than 0.5% but not more than 1% of vanadium
- 7201 50 90 00Alloy pig iron; spiegeleisen: other
7202 Ferrolegeringar
- 7202 11 20 00With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65%
- 7202 11 80 00Containing by weight more than 2% of carbon: other
- 7202 19 00 00Ferro-alloys, ferro-manganese, other
- 7202 21 00 00Containing by weight more than 55% of silicon
- 7202 29 10 00Containing by weight 4% or more but not more than 10% of magnesium
- 7202 29 90 00Ferro-alloys, ferro-silicon, other
- 7202 30 00 00Ferro-alloys, ferro-silico-manganese
- 7202 41 10 00Containing by weight more than 4% but not more than 6% of carbon
- 7202 41 90 00Containing by weight more than 6% of carbon
- 7202 49 10 20Containing by weight more than 30% but not more than 90% of chromium (super-refined ferrochromium)
- 7202 49 10 90Containing by weight not more than 0.05% of carbon: other
- 7202 49 50 11Containing by weight not more than 0.1% of carbon and more than 30% but not more than 90% of chromium (super-refined ferrochromium)
- 7202 49 50 19With a chromium content by weight of 30% and more: other
- 7202 49 50 90Containing by weight more than 0.05% but not more than 0.5%: other
- 7202 49 90 00Containing by weight more than 0.5% but not more than 4% of carbon
- 7202 50 00 00Ferro-alloys, ferro-silico-chromium
- 7202 60 00 00Ferro-alloys, ferro-nickel
- 7202 70 00 00Ferro-alloys, ferro-molybdenum
- 7202 80 00 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten
- 7202 91 00 00Ferro-alloys, other, ferro-titanium and ferro-silico-titanium
- 7202 92 00 00Ferro-alloys, other, ferro-vanadium
- 7202 93 00 00Ferro-alloys, other, ferro-niobium
- 7202 99 10 00Ferro-alloys, other, ferro-phosphorus
- 7202 99 30 00Ferro-alloys, other, ferro-silico-magnesium
- 7202 99 80 30Calcium-silicon - an alloy that contains by weight 16% or more of calcium, 45% or more of silicon, not less than 4% but less than 14% of iron and not more than 10% of any other element; whether or not presented in bulk, packaged in bags or in steel drums, enclosed in steel sheets (or cored wire), or otherwise presented
- 7202 99 80 90Ferro-alloys, other
7203 Produkter erhållna genom direkt reduktion av järnmalm (järnsvamp) samt andra porösa, järnbaserade produkter i form av oregelbundna stycken eller pelletar eller i liknande former; järn med en renhetsgrad av minst 99,94 viktprocent i form av oregelbundna stycken eller pelletar eller i liknande former
7204 Avfall och skrot av järn eller stål; omsmältningsgöt av järn eller stål
- 7204 10 00 00Waste and scrap of cast iron
- 7204 21 10 10Containing by weight 8% or more of nickel: scrap
- 7204 21 10 90Containing by weight 8% or more of nickel: other
- 7204 21 90 10Waste and scrap of alloy steel: of stainless steel, other, scrap
- 7204 21 90 90Waste and scrap of alloy steel: of stainless steel, other
- 7204 29 00 10Waste and scrap of alloy steel: other, scrap
- 7204 29 00 90Waste and scrap of alloy steel: other
- 7204 30 00 10Waste and scrap of tinned iron or steel: scrap
- 7204 30 00 90Waste and scrap of tinned iron or steel: other
- 7204 41 10 10Turnings, shavings, chips, milling waste, sawdust: scrap
- 7204 41 10 90Turnings, shavings, chips, milling waste, sawdust: other
- 7204 41 91 10Turnings, shavings, chips, milling waste, sawdust, filings: trimmings and stampings, in bundles, scrap
- 7204 41 91 90Turnings, shavings, chips, milling waste, sawdust, filings: trimmings and stampings, in bundles, other
- 7204 41 99 10Turnings, shavings, chips, milling waste, sawdust, filings: trimmings and stampings, other, scrap
- 7204 41 99 90Turnings, shavings, chips, milling waste, sawdust, filings: trimmings and stampings, other
- 7204 49 10 10Other waste and scrap: other, fragmentised (shredded), scrap
- 7204 49 10 90Other waste and scrap: other, fragmentised (shredded), other
- 7204 49 30 10Other waste and scrap: other, in bundles, scrap
- 7204 49 30 90Other waste and scrap: other, in bundles, other
- 7204 49 90 10Other waste and scrap: other, scrap
- 7204 49 90 90Other waste and scrap: other
- 7204 50 00 00Ferrous waste and scrap: remelting scrap ingots
7205 Granulat och pulver av tackjärn, spegeljärn, järn eller stål
7206 Järn och olegerat stål i form av göt eller i andra obearbetade former (med undantag av järn enligt nr 7203)
7207 Halvfärdiga produkter av järn eller olegerat stål
- 7207 11 11 00Rolled or obtained by continuous casting: of free-cutting steel
- 7207 11 14 00Of a thickness not exceeding 130 mm
- 7207 11 16 00Of a thickness exceeding 130 mm
- 7207 11 90 00Of rectangular: forged
- 7207 12 10 00Rolled or obtained by continuous casting
- 7207 12 90 00Other, of rectangular (other than square) cross-section: forged
- 7207 19 12 00Rolled or obtained by continuous casting
- 7207 19 19 00Of circular or polygonal cross-section: forged
- 7207 19 80 10Blanks for angles, shapes and sections, rolled or obtained by continuous casting
- 7207 19 80 90Containing by weight less than 0.25% of carbon: other
- 7207 20 11 00Rolled or obtained by continuous casting: of free-cutting steel
- 7207 20 15 000.25% or more but less than 0.6% of carbon
- 7207 20 17 000.6% or more of carbon
- 7207 20 19 00Of rectangular: forged
- 7207 20 32 00Rolled or obtained by continuous casting
- 7207 20 39 00Other, of rectangular (other than square) cross-section: forged
- 7207 20 52 00Rolled or obtained by continuous casting
- 7207 20 59 00Of circular or polygonal cross-section: forged
- 7207 20 80 10Blanks for angles, shapes and sections, rolled or obtained by continuous casting
- 7207 20 80 90Containing by weight 0.25% or more of carbon: other
7208 Valsade platta produkter av järn eller olegerat stål, med en bredd av minst 600 mm, varmvalsade och varken pläterade, på annat sätt metallöverdragna eller försedda med annat överdrag
- 7208 10 00 00In coils, not further worked than hot-rolled, with patterns in relief
- 7208 25 00 00Of a thickness of 4.75 mm or more
- 7208 26 00 00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208 27 00 00Of a thickness of less than 3 mm
- 7208 36 00 00Of a thickness exceeding 10 mm
- 7208 37 00 10Of a thickness of 4.75 mm or more but not exceeding 10 mm: intended for re-rolling
- 7208 37 00 90Of a thickness of 4.75 mm or more but not exceeding 10 mm: other
- 7208 38 00 10Of a thickness of 3 mm or more but less than 4.75 mm: intended for re-rolling
- 7208 38 00 90Of a thickness of 3 mm or more but less than 4.75 mm: other
- 7208 39 00 10Of a thickness of less than 3 mm: intended for re-rolling
- 7208 39 00 90Of a thickness of less than 3 mm: other
- 7208 40 00 10Of a thickness of 2 mm or more
- 7208 40 00 90Of a thickness of less than 2 mm
- 7208 51 20 10Of non-alloy steel, excluding tool steel
- 7208 51 20 90Of a thickness exceeding 15 mm: other
- 7208 51 91 10Of non-alloy steel, excluding tool steel
- 7208 51 91 902 050 mm or more: other
- 7208 51 98 10Of non-alloy steel, excluding tool steel
- 7208 51 98 90Less than 2 050 mm: other
- 7208 52 10 00Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
- 7208 52 91 10Of non-alloy steel, excluding tool steel
- 7208 52 91 902 050 mm or more: other
- 7208 52 99 00Less than 2 050 mm
- 7208 53 10 00Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more
- 7208 53 90 00Of a thickness of 3 mm or more but less than 4.75 mm: other
- 7208 54 00 00Of a thickness of less than 3 mm
- 7208 90 20 10Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
- 7208 90 20 90Flat-rolled products of iron or non-alloy steel, of a width: other, perforated, other
- 7208 90 80 10Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7208 90 80 20Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
- 7208 90 80 90Flat-rolled products of iron or non-alloy steel, of a width: other
7209 Valsade platta produkter av järn eller olegerat stål, med en bredd av minst 600 mm, kallvalsade och varken pläterade, på annat sätt metallöverdragna eller försedda med annat överdrag
- 7209 15 00 10Of a thickness of 3 mm or more: 'electrical'
- 7209 15 00 90Of a thickness of 3 mm or more: other
- 7209 16 10 00Of a thickness exceeding 1 mm but less than 3 mm: 'electrical'
- 7209 16 90 00Of a thickness exceeding 1 mm but less than 3 mm: other
- 7209 17 10 00Of a thickness of 0.5 mm or more but not exceeding 1 mm: 'electrical'
- 7209 17 90 00Of a thickness of 0.5 mm or more but not exceeding 1 mm: other
- 7209 18 10 00Of a thickness of less than 0.5 mm: 'electrical'
- 7209 18 91 00Of a thickness of 0.35 mm or more but less than 0.5 mm
- 7209 18 99 10Annealed (known as 'black plates')
- 7209 18 99 90Of a thickness of less than 0.35 mm: other
- 7209 25 00 10Of a thickness of 3 mm or more: 'electrical'
- 7209 25 00 90Of a thickness of 3 mm or more: other
- 7209 26 10 00Of a thickness exceeding 1 mm but less than 3 mm: 'electrical'
- 7209 26 90 00Of a thickness exceeding 1 mm but less than 3 mm: other
- 7209 27 10 00Of a thickness of 0.5 mm or more but not exceeding 1 mm: 'electrical'
- 7209 27 90 00Of a thickness of 0.5 mm or more but not exceeding 1 mm: other
- 7209 28 10 00Of a thickness of less than 0.5 mm: 'electrical'
- 7209 28 90 00Of a thickness of less than 0.5 mm: other
- 7209 90 20 00Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7209 90 80 10Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7209 90 80 90Flat-rolled products of iron or non-alloy steel, of a width: other
7210 Valsade platta produkter av järn eller olegerat stål, med en bredd av minst 600 mm, pläterade, på annat sätt metallöverdragna eller försedda med annat överdrag
- 7210 11 00 10Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210 11 00 90Of a thickness of 0.5 mm or more: other
- 7210 12 20 10Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210 12 20 90Of a thickness of less than 0.5 mm: tinplate, other
- 7210 12 80 10Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210 12 80 90Of a thickness of less than 0.5 mm: other
- 7210 20 00 10Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210 20 00 90Plated or coated with lead, including terne-plate: other
- 7210 30 00 10Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210 30 00 90Electrolytically plated or coated with zinc: other
- 7210 41 00 20Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 41 00 30Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 41 00 80Not further worked than surface-treated or simply cut into: other
- 7210 41 00 90Otherwise plated or coated with zinc: corrugated, other
- 7210 49 00 20Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 49 00 30Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 49 00 80Not further worked than surface-treated or simply cut into: other
- 7210 49 00 90Otherwise plated or coated with zinc: other
- 7210 50 00 10Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210 50 00 90Plated or coated with chromium oxides or with chromium: other
- 7210 61 00 20Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 61 00 30Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 61 00 80Not further worked than surface-treated or simply cut into: other
- 7210 61 00 90Plated or coated with aluminium-zinc alloys: other
- 7210 69 00 20Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 69 00 30Plated or coated by hot dip galvanisation with aluminium and/or magnesium, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 69 00 80Not further worked than surface-treated or simply cut into: other
- 7210 69 00 90Plated or coated with aluminium: other
- 7210 70 10 15Not further worked than surface-treated or simply cut into: tinplate, not painted
- 7210 70 10 19Not further worked than surface-treated or simply cut into: tinplate, other
- 7210 70 10 91Not further worked than surface-treated or simply cut into: other
- 7210 70 10 95Tinplate, varnished: other
- 7210 70 80 11Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
- 7210 70 80 20Coated or plated with tin: not painted
- 7210 70 80 23Coated or plated with tin: other
- 7210 70 80 25Not further worked than surface-treated or simply cut into: other
- 7210 70 80 91Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
- 7210 70 80 92Coated or plated with tin: not painted
- 7210 70 80 93Coated or plated with tin: other
- 7210 70 80 95Painted, varnished or coated with plastics: other
- 7210 90 30 10Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)
- 7210 90 30 90Flat-rolled products of iron or non-alloy steel, of a width: other, clad, other
- 7210 90 40 10Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)
- 7210 90 40 90Flat-rolled products of iron or non-alloy steel, of a width: other, tinned and printed, other
- 7210 90 80 20Coated or plated with tin, whether or not coated with: not painted
- 7210 90 80 29Coated or plated with tin, whether or not coated with: other
- 7210 90 80 91Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)
- 7210 90 80 92Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 90 80 99Flat-rolled products of iron or non-alloy steel, of a width: other
7211 Valsade platta produkter av järn eller olegerat stål, med en bredd av mindre än 600 mm och varken pläterade, på annat sätt metallöverdragna eller försedda med annat överdrag
- 7211 13 00 11Of a width not exceeding 350 mm and of a thickness of 50 mm or more
- 7211 13 00 19Rolled on four faces or in a closed box pass, of a width: other
- 7211 14 00 10Of a width exceeding 500 mm
- 7211 14 00 91Of a width not exceeding 350 mm and of a thickness of 50 mm or more
- 7211 14 00 95Of a width not exceeding 500 mm: other
- 7211 19 00 10Of a width exceeding 500 mm
- 7211 19 00 91Of a width not exceeding 350 mm and of a thickness of 50 mm or more
- 7211 19 00 95Of a width not exceeding 500 mm: other
- 7211 23 20 10Of a width exceeding 500 mm
- 7211 23 20 90Of a width not exceeding 500 mm
- 7211 23 30 10Of a width exceeding 500 mm
- 7211 23 30 91In coils intended for the manufacture of tinplate
- 7211 23 30 99Of a width not exceeding 500 mm: other
- 7211 23 80 11In coils, annealed (known as 'black plates')
- 7211 23 80 19Of a width exceeding 500 mm: other
- 7211 23 80 93Annealed (known as 'black plates')
- 7211 23 80 95In coils intended for the manufacture of tinplate: other
- 7211 23 80 97In coils, annealed (known as 'black plates')
- 7211 23 80 99Of a width not exceeding 500 mm: other
- 7211 29 00 11Of a width exceeding 500 mm: 'electrical'
- 7211 29 00 19Of a width exceeding 500 mm: other
- 7211 29 00 91Of a width not exceeding 500 mm: 'electrical'
- 7211 29 00 99Of a width not exceeding 500 mm: other
- 7211 90 20 00Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7211 90 80 10Not further worked than surface-treated
- 7211 90 80 20Of a width exceeding 500 mm: other
- 7211 90 80 90Of a width not exceeding 500 mm
7212 Valsade platta produkter av järn eller olegerat stål, med en bredd av mindre än 600 mm, pläterade, på annat sätt metallöverdragna eller försedda med annat överdrag
- 7212 10 10 00Tinplate, not further worked than surface-treated
- 7212 10 90 11Not further worked than surface-treated
- 7212 10 90 19Of a width exceeding 500 mm: other
- 7212 10 90 90Of a width not exceeding 500 mm
- 7212 20 00 11Not further worked than surface-treated
- 7212 20 00 19Of a width exceeding 500 mm: other
- 7212 20 00 90Of a width not exceeding 500 mm
- 7212 30 00 20Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7212 30 00 30Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7212 30 00 80Not further worked than surface-treated: other
- 7212 30 00 90Otherwise plated or coated with zinc: other
- 7212 40 20 10Tinplate, not further worked than varnished: not painted
- 7212 40 20 19Tinplate, not further worked than varnished: other
- 7212 40 20 91Not further worked than surface-treated
- 7212 40 20 93Of a width exceeding 500 mm: other
- 7212 40 20 99Of a width not exceeding 500 mm
- 7212 40 80 01Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
- 7212 40 80 12Coated or plated with tin: not painted
- 7212 40 80 14Coated or plated with tin: other
- 7212 40 80 15Not further worked than surface-treated: other
- 7212 40 80 21Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
- 7212 40 80 30Coated or plated with tin: not painted
- 7212 40 80 33Coated or plated with tin: other
- 7212 40 80 35Of a width exceeding 500 mm: other
- 7212 40 80 80Coated or plated with tin: not painted
- 7212 40 80 81Coated or plated with tin: other
- 7212 40 80 82Of non-alloy steel, painted, varnished or coated with: other
- 7212 40 80 85Coated or plated with tin: not painted
- 7212 40 80 86Coated or plated with tin: other
- 7212 40 80 87Of a width not exceeding 500 mm: other
- 7212 50 20 11Not further worked than surface-treated
- 7212 50 20 19Of a width exceeding 500 mm: other
- 7212 50 20 90Of a width not exceeding 500 mm
- 7212 50 30 11Not further worked than surface-treated
- 7212 50 30 19Of a width exceeding 500 mm: other
- 7212 50 30 90Of a width not exceeding 500 mm
- 7212 50 40 11Not further worked than surface-treated
- 7212 50 40 19Of a width exceeding 500 mm: other
- 7212 50 40 90Of a width not exceeding 500 mm
- 7212 50 61 20Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7212 50 61 30Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7212 50 61 80Plated or coated with aluminium-zinc alloys: other
- 7212 50 69 20Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7212 50 69 30Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7212 50 69 80Plated or coated with aluminium: other
- 7212 50 90 11Silvered, gilded, platinum-plated or enamelled
- 7212 50 90 13Not further worked than surface-treated
- 7212 50 90 14Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7212 50 90 19Of a width exceeding 500 mm: other
- 7212 50 90 92Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7212 50 90 95Of a width not exceeding 500 mm: other
- 7212 60 00 12Hot-rolled, not further worked than clad
- 7212 60 00 19Not further worked than surface-treated: other
- 7212 60 00 20Of a width not exceeding 500 mm: other
- 7212 60 00 50Not further worked than surface-treated
- 7212 60 00 98Flat-rolled products of iron or non-alloy steel, of a width: clad, other
7213 Stång av järn eller olegerat stål, varmvalsad, i oregelbundet upprullade ringar
- 7213 10 00 00Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7213 20 00 00Other, of free-cutting steel
- 7213 91 10 00Of a type used for concrete reinforcement
- 7213 91 20 00Of a type used for tyre cord
- 7213 91 41 00Containing by weight 0.06% or less of carbon
- 7213 91 49 00Containing by weight more than 0.06% but less than 0.25% of carbon
- 7213 91 70 00Containing by weight 0.25% or more but not more than 0.75% of carbon
- 7213 91 90 00Containing by weight more than 0.75% of carbon
- 7213 99 10 00Containing by weight less than 0.25% of carbon
- 7213 99 90 00Containing by weight 0.25% or more of carbon
7214 Annan stång av järn eller olegerat stål, smidd, varmvalsad, varmdragen eller varmsträngpressad, även vriden efter valsningen men inte vidare bearbetad
- 7214 10 00 10Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
- 7214 10 00 90Other bars and rods of iron or non-alloy steel, not further: forged, other
- 7214 20 00 10High fatigue performance concrete reinforcing bars and rods
- 7214 20 00 20Concrete reinforcement bars and rods excluding long products, such as round bars
- 7214 20 00 80Containing indentations, ribs, grooves or other: other
- 7214 30 00 10Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
- 7214 30 00 90Other, of free-cutting steel: other
- 7214 91 10 10Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
- 7214 91 10 90Containing by weight less than 0.25% of carbon: other
- 7214 91 90 10Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
- 7214 91 90 90Containing by weight 0.25% or more of carbon: other
- 7214 99 10 10Bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance bars and rods, and excluding other long products, such as round bars
- 7214 99 10 90Of a type used for concrete reinforcement: other
- 7214 99 31 0080 mm or more
- 7214 99 39 00Less than 80 mm
- 7214 99 50 00Containing by weight less than 0.25% of carbon: other
- 7214 99 71 0080 mm or more
- 7214 99 79 00Less than 80 mm
- 7214 99 95 10Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
- 7214 99 95 90Containing by weight 0.25% or more of carbon: other
7215 Annan stång av järn eller olegerat stål
- 7215 10 00 00Of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215 50 11 00Of rectangular (other than square) cross-section
- 7215 50 19 00Containing by weight less than 0.25% of carbon: other
- 7215 50 80 00Containing by weight 0.25% or more of carbon
- 7215 90 00 10Hot-rolled, hot-drawn or extruded, not further worked than clad
- 7215 90 00 90Other bars and rods of iron or non-alloy steel: other
7216 Profiler av järn eller olegerat stål
- 7216 10 00 00U, i or h sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216 21 00 00L or t sections, not further worked than hot-rolled: l sections
- 7216 22 00 00L or t sections, not further worked than hot-rolled: t sections
- 7216 31 10 00Of a height of 80 mm or more but not exceeding 220 mm
- 7216 31 90 00Of a height exceeding 220 mm
- 7216 32 11 00With parallel flange faces
- 7216 32 19 00Of a height of 80 mm or more but not exceeding 220 mm: other
- 7216 32 91 00With parallel flange faces
- 7216 32 99 00Of a height exceeding 220 mm: other
- 7216 33 10 00Of a height of 80 mm or more but not exceeding 180 mm
- 7216 33 90 00Of a height exceeding 180 mm
- 7216 40 10 00L or t sections, not further worked than hot-rolled: l sections
- 7216 40 90 00L or t sections, not further worked than hot-rolled: t sections
- 7216 50 10 00With a cross-section which is capable of being enclosed in a square the side of which is 80 mm
- 7216 50 91 10In the range up to 204 mm width
- 7216 50 91 90Other angles, shapes and sections, not further worked than: other, bulb flats, other
- 7216 50 99 00Other angles, shapes and sections, not further worked than: other
- 7216 61 10 00C, l, u, z, omega or open-ended sections
- 7216 61 90 00Obtained from flat-rolled products: other
- 7216 69 00 00Angles, shapes and sections, not further worked than: other
- 7216 91 10 00Cold-formed or cold-finished from flat-rolled products: profiled (ribbed) sheets
- 7216 91 80 00Cold-formed or cold-finished from flat-rolled products: other
- 7216 99 00 10Hot-rolled, hot-drawn or extruded, not further worked than clad
- 7216 99 00 90Angles, shapes and sections of iron or non-alloy steel: other
7217 Tråd av järn eller olegerat stål
- 7217 10 10 00With a maximum cross-sectional dimension of less than 0.8 mm
- 7217 10 31 00Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7217 10 39 00With a maximum cross-sectional dimension of 0.8 mm or more: other
- 7217 10 50 00Containing by weight 0.25% or more but less than 0.6% of carbon
- 7217 10 90 10Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3 mm
- 7217 10 90 90Containing by weight 0.6% or more of carbon: other
- 7217 20 10 00With a maximum cross-sectional dimension of less than 0.8 mm
- 7217 20 30 00With a maximum cross-sectional dimension of 0.8 mm or more
- 7217 20 50 00Containing by weight 0.25% or more but less than 0.6% of carbon
- 7217 20 90 10Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3 mm
- 7217 20 90 90Containing by weight 0.6% or more of carbon: other
- 7217 30 41 00Containing by weight less than 0.25% of carbon: copper-coated
- 7217 30 49 00Containing by weight less than 0.25% of carbon: other
- 7217 30 50 00Containing by weight 0.25% or more but less than 0.6% of carbon
- 7217 30 90 00Containing by weight 0.6% or more of carbon
- 7217 90 20 00Containing by weight less than 0.25% of carbon
- 7217 90 50 00Containing by weight 0.25% or more but less than 0.6% of carbon
- 7217 90 90 00Containing by weight 0.6% or more of carbon
7218 Rostfritt stål i form av göt eller i andra obearbetade former; halvfärdiga produkter av rostfritt stål
- 7218 10 00 00Ingots and other primary forms
- 7218 91 10 00Containing by weight 2.5% or more of nickel
- 7218 91 80 00Containing by weight less than 2.5% of nickel
- 7218 99 11 00Rolled or obtained by continous casting
- 7218 99 19 00Stainless steel in ingots or other primary forms: other, of square cross-section, forged
- 7218 99 20 00Rolled or obtained by continuous casting
- 7218 99 80 00Stainless steel in ingots or other primary forms: other, forged
7219 Valsade platta produkter av rostfritt stål, med en bredd av minst 600 mm
- 7219 11 00 10Of a thickness exceeding 10 mm: consigned from Türkiye
- 7219 11 00 90Of a thickness exceeding 10 mm: other
- 7219 12 10 10Containing by weight 2.5% or more of nickel: consigned from Türkiye
- 7219 12 10 90Containing by weight 2.5% or more of nickel: other
- 7219 12 90 10Containing by weight less than 2.5% of nickel: consigned from Türkiye
- 7219 12 90 90Containing by weight less than 2.5% of nickel: other
- 7219 13 10 10Containing by weight 2.5% or more of nickel: consigned from Türkiye
- 7219 13 10 90Containing by weight 2.5% or more of nickel: other
- 7219 13 90 10Containing by weight less than 2.5% of nickel: consigned from Türkiye
- 7219 13 90 90Containing by weight less than 2.5% of nickel: other
- 7219 14 10 10Containing by weight 2.5% or more of nickel: consigned from Türkiye
- 7219 14 10 90Containing by weight 2.5% or more of nickel: other
- 7219 14 90 10Containing by weight less than 2.5% of nickel: consigned from Türkiye
- 7219 14 90 90Containing by weight less than 2.5% of nickel: other
- 7219 21 10 00Containing by weight 2.5% or more of nickel
- 7219 21 90 00Containing by weight less than 2.5% of nickel
- 7219 22 10 10Containing by weight 2.5% or more of nickel: consigned from Türkiye
- 7219 22 10 90Containing by weight 2.5% or more of nickel: other
- 7219 22 90 10Containing by weight less than 2.5% of nickel: consigned from Türkiye
- 7219 22 90 90Containing by weight less than 2.5% of nickel: other
- 7219 23 00 10Of a thickness of 3 mm or more but less than 4.75 mm: consigned from Türkiye
- 7219 23 00 90Of a thickness of 3 mm or more but less than 4.75 mm: other
- 7219 24 00 10Of a thickness of less than 3 mm: consigned from Türkiye
- 7219 24 00 90Of a thickness of less than 3 mm: other
- 7219 31 00 10Of a thickness of 4.75 mm or more: consigned from Taiwan or Vietnam
- 7219 31 00 20Of a thickness of 4.75 mm or more: consigned from Türkiye
- 7219 31 00 90Of a thickness of 4.75 mm or more: other
- 7219 32 10 10Containing by weight 2.5% or more of nickel: consigned from Taiwan or Vietnam
- 7219 32 10 20Containing by weight 2.5% or more of nickel: consigned from Türkiye
- 7219 32 10 90Containing by weight 2.5% or more of nickel: other
- 7219 32 90 10Containing by weight less than 2.5% of nickel: consigned from Taiwan or Vietnam
- 7219 32 90 20Containing by weight less than 2.5% of nickel: consigned from Türkiye
- 7219 32 90 90Containing by weight less than 2.5% of nickel: other
- 7219 33 10 10Containing by weight 2.5% or more of nickel: consigned from Taiwan or Vietnam
- 7219 33 10 20Containing by weight 2.5% or more of nickel: consigned from Türkiye
- 7219 33 10 90Containing by weight 2.5% or more of nickel: other
- 7219 33 90 10Containing by weight less than 2.5% of nickel: consigned from Taiwan or Vietnam
- 7219 33 90 20Containing by weight less than 2.5% of nickel: consigned from Türkiye
- 7219 33 90 90Containing by weight less than 2.5% of nickel: other
- 7219 34 10 10Containing by weight 2.5% or more of nickel: consigned from Taiwan or Vietnam
- 7219 34 10 20Containing by weight 2.5% or more of nickel: consigned from Türkiye
- 7219 34 10 90Containing by weight 2.5% or more of nickel: other
- 7219 34 90 10Containing by weight less than 2.5% of nickel: consigned from Taiwan or Vietnam
- 7219 34 90 20Containing by weight less than 2.5% of nickel: consigned from Türkiye
- 7219 34 90 90Containing by weight less than 2.5% of nickel: other
- 7219 35 10 10Containing by weight 2.5% or more of nickel: consigned from Taiwan or Vietnam
- 7219 35 10 20Containing by weight 2.5% or more of nickel: consigned from Türkiye
- 7219 35 10 90Containing by weight 2.5% or more of nickel: other
- 7219 35 90 10Containing by weight less than 2.5% of nickel: consigned from Taiwan or Vietnam
- 7219 35 90 20Containing by weight less than 2.5% of nickel: consigned from Türkiye
- 7219 35 90 90Containing by weight less than 2.5% of nickel: other
- 7219 90 20 10Flat-rolled products of stainless steel, of a width of 600: other, perforated, consigned from Taiwan or Vietnam
- 7219 90 20 20Flat-rolled products of stainless steel, of a width of 600: other, perforated, consigned from Türkiye
- 7219 90 20 90Flat-rolled products of stainless steel, of a width of 600: other, perforated, other
- 7219 90 80 10Flat-rolled products of stainless steel, of a width of 600: other, consigned from Taiwan or Vietnam
- 7219 90 80 20Flat-rolled products of stainless steel, of a width of 600: other, consigned from Türkiye
- 7219 90 80 90Flat-rolled products of stainless steel, of a width of 600: other
7220 Valsade platta produkter av rostfritt stål, med en bredd av mindre än 600 mm
- 7220 11 00 10Of a thickness of 4.75 mm or more: consigned from Türkiye
- 7220 11 00 90Of a thickness of 4.75 mm or more: other
- 7220 12 00 10Of a thickness of less than 4.75 mm: consigned from Türkiye
- 7220 12 00 90Of a thickness of less than 4.75 mm: other
- 7220 20 21 102.5% or more of nickel: consigned from Taiwan or Vietnam
- 7220 20 21 202.5% or more of nickel: consigned from Türkiye
- 7220 20 21 902.5% or more of nickel: other
- 7220 20 29 10Less than 2.5% of nickel: consigned from Taiwan or Vietnam
- 7220 20 29 20Less than 2.5% of nickel: consigned from Türkiye
- 7220 20 29 90Less than 2.5% of nickel: other
- 7220 20 41 102.5% or more of nickel: consigned from Taiwan or Vietnam
- 7220 20 41 202.5% or more of nickel: consigned from Türkiye
- 7220 20 41 902.5% or more of nickel: other
- 7220 20 49 10Less than 2.5% of nickel: consigned from Taiwan or Vietnam
- 7220 20 49 20Less than 2.5% of nickel: consigned from Türkiye
- 7220 20 49 90Less than 2.5% of nickel: other
- 7220 20 81 102.5% or more of nickel: consigned from Taiwan or Vietnam
- 7220 20 81 202.5% or more of nickel: consigned from Türkiye
- 7220 20 81 902.5% or more of nickel: other
- 7220 20 89 10Less than 2.5% of nickel: consigned from Taiwan or Vietnam
- 7220 20 89 20Less than 2.5% of nickel: consigned from Türkiye
- 7220 20 89 90Less than 2.5% of nickel: other
- 7220 90 20 10Flat-rolled products of stainless steel, of a width of less: other, perforated, consigned from Taiwan or Vietnam
- 7220 90 20 20Flat-rolled products of stainless steel, of a width of less: other, perforated, consigned from Türkiye
- 7220 90 20 90Flat-rolled products of stainless steel, of a width of less: other, perforated, other
- 7220 90 80 10Flat-rolled products of stainless steel, of a width of less: other, consigned from Taiwan or Vietnam
- 7220 90 80 20Flat-rolled products of stainless steel, of a width of less: other, consigned from Türkiye
- 7220 90 80 90Flat-rolled products of stainless steel, of a width of less: other
7221 Stång av rostfritt stål, varmvalsad, i oregelbundet upprullade ringar
7222 Annan stång av rostfritt stål; profiler av rostfritt stål
- 7222 11 11 002.5% or more of nickel
- 7222 11 19 00Less than 2.5% of nickel
- 7222 11 81 002.5% or more of nickel
- 7222 11 89 00Less than 2.5% of nickel
- 7222 19 10 00Containing by weight 2.5% or more of nickel
- 7222 19 90 00Containing by weight less than 2.5% of nickel
- 7222 20 11 002.5% or more of nickel
- 7222 20 19 00Less than 2.5% of nickel
- 7222 20 21 002.5% or more of nickel
- 7222 20 29 00Less than 2.5% of nickel
- 7222 20 31 002.5% or more of nickel
- 7222 20 39 00Less than 2.5% of nickel
- 7222 20 81 002.5% or more of nickel
- 7222 20 89 00Less than 2.5% of nickel
- 7222 30 51 002.5% or more of nickel
- 7222 30 91 00Less than 2.5% of nickel
- 7222 30 97 10Hot-rolled, hot-drawn or extruded, not further worked than clad
- 7222 30 97 90Other bars and rods: other
- 7222 40 10 00Not further worked than hot-rolled, hot-drawn or extruded
- 7222 40 50 00Not further worked than cold-formed or cold-finished
- 7222 40 90 10Hot-rolled, hot-drawn or extruded, not further worked than clad
- 7222 40 90 90Angles, shapes and sections: other
7223 Tråd av rostfritt stål
- 7223 00 11 00Containing by weight 28% or more but not more than 31% of nickel and 20% or more but not more than 22% of chromium
- 7223 00 19 00Containing by weight 2.5% or more of nickel: other
- 7223 00 91 00Containing by weight 13% or more but not more than 25% of chromium and 3.5% or more but not more than 6% of aluminium
- 7223 00 99 00Containing by weight less than 2.5% of nickel: other
7224 Annat legerat stål i form av göt eller i andra obearbetade former; halvfärdiga produkter av annat legerat stål
- 7224 10 10 00Ingots and other primary forms: of tool steel
- 7224 10 90 00Ingots and other primary forms: other
- 7224 90 02 29Of rectangular (including square) cross-section
- 7224 90 02 89Hot-rolled or obtained by continuous casting
- 7224 90 02 99Other alloy steel in ingots or other primary forms: other, of tool steel, other
- 7224 90 03 00The width measuring less than twice the thickness: of high-speed steel
- 7224 90 05 00Containing by weight not more than 0.7% of carbon, 0.5% or more but not more than 1.2% of manganese and 0.6% or more but not more than 2.3% of silicon; containing by weight 0.0008% or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
- 7224 90 07 00The width measuring less than twice the thickness: other
- 7224 90 14 00Hot-rolled or obtained by continuous casting: other
- 7224 90 18 00Of rectangular (including square) cross-section: forged
- 7224 90 31 00Containing by weight not less than 0.9% but not more than 1.15% of carbon, not less than 0.5% but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum
- 7224 90 38 00Hot-rolled or obtained by continuous casting: other
- 7224 90 90 00Other alloy steel in ingots or other primary forms: other, forged
7225 Valsade platta produkter av annat legerat stål, med en bredd av minst 600 mm
- 7225 11 00 11With a maximum core loss not higher than 0.7 w/kg
- 7225 11 00 12With a maximum core loss higher than 0.7 w/kg but not higher than 0.9 w/kg
- 7225 11 00 15With a maximum core loss higher than 0.9 w/kg but not higher than 1.05 w/kg
- 7225 11 00 19With a maximum core loss higher than 1.05 w/kg
- 7225 11 00 90Flat-rolled products of other alloy steel, of a width: of silicon-electrical steel, grain-oriented, other
- 7225 19 10 10Products clad, plated or coated, not in coils, without patterns in relief, of a thickness exceeding 10 mm and products clad, plated or coated, not in coils, without patterns in relief, of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
- 7225 19 10 90Flat-rolled products of other alloy steel, of a width: of silicon-electrical steel, other, hot-rolled, other
- 7225 19 90 00Flat-rolled products of other alloy steel, of a width: of silicon-electrical steel, other, cold-rolled
- 7225 30 10 00Other, not further worked than hot-rolled, in coils: of tool steel
- 7225 30 30 10Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
- 7225 30 30 90Other, not further worked than hot-rolled, in coils: of high-speed steel, other
- 7225 30 90 00Other, not further worked than hot-rolled, in coils: other
- 7225 40 12 30Of a thickness of less than 4.75 mm
- 7225 40 12 90Other, not further worked than hot-rolled, not in coils: of tool steel, other
- 7225 40 15 10Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
- 7225 40 15 90Other, not further worked than hot-rolled, not in coils: of high-speed steel, other
- 7225 40 40 00Of a thickness exceeding 10 mm
- 7225 40 60 10Of a width of 2 050 mm or more
- 7225 40 60 90Of a thickness of 4.75 mm or more but not exceeding 10 mm: other
- 7225 40 90 00Of a thickness of less than 4.75 mm
- 7225 50 20 10Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
- 7225 50 20 90Other, not further worked than cold-rolled (cold-reduced): of high-speed steel, other
- 7225 50 80 00Other, not further worked than cold-rolled (cold-reduced): other
- 7225 91 00 10Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
- 7225 91 00 90Electrolytically plated or coated with zinc: other
- 7225 92 00 20Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7225 92 00 30Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7225 92 00 80Not further worked than surface-treated, including cladding: other
- 7225 92 00 90Otherwise plated or coated with zinc: other
- 7225 99 00 11Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
- 7225 99 00 22Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7225 99 00 23Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7225 99 00 25Not further worked than surface-treated, including cladding: other
- 7225 99 00 41Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7225 99 00 45Other, of a thickness exceeding 10 mm or of a thickness: other
- 7225 99 00 91Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
- 7225 99 00 92Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7225 99 00 93Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7225 99 00 95Flat-rolled products of other alloy steel, of a width: other
7226 Valsade platta produkter av annat legerat stål, med en bredd av mindre än 600 mm
- 7226 11 00 12With a maximum core loss not higher than 0.7 w/kg
- 7226 11 00 13With a maximum core loss higher than 0.7 w/kg but not higher than 0.9 w/kg
- 7226 11 00 14With a maximum core loss higher than 0.9 w/kg but not higher than 1.05 w/kg
- 7226 11 00 16With a maximum core loss higher than 1.05 w/kg
- 7226 11 00 19Of a width exceeding 500 mm: other
- 7226 11 00 92With a maximum core loss not higher than 0.7 w/kg
- 7226 11 00 93With a maximum core loss higher than 0.7 w/kg but not higher than 0.9 w/kg
- 7226 11 00 94With a maximum core loss higher than 0.9 w/kg but not higher than 1.05 w/kg
- 7226 11 00 96With a maximum core loss higher than 1.05 w/kg
- 7226 11 00 99Of a width not exceeding 500 mm: other
- 7226 19 10 10Products clad, plated or coated
- 7226 19 10 91Of a width not exceeding 350 mm and of a thickness of 50 mm or more
- 7226 19 10 95Not further worked than hot-rolled: other
- 7226 19 80 10Of a width exceeding 500 mm
- 7226 19 80 90Of a width not exceeding 500 mm
- 7226 20 00 10Not further worked than hot-rolled; of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than cold-rolled (cold-reduced) or not further worked than surface-treated, including cladding
- 7226 20 00 90Flat-rolled products of other alloy steel, of a width: of high-speed steel, other
- 7226 91 20 00Not further worked than hot-rolled: of tool steel
- 7226 91 91 11Of a width not exceeding 350 mm and of a thickness of 50 mm or more
- 7226 91 91 19Of a thickness of 4.75 mm or more: other
- 7226 91 99 00Of a thickness of less than 4.75 mm
- 7226 92 00 10Of a width exceeding 500 mm
- 7226 92 00 90Of a width not exceeding 500 mm
- 7226 99 10 00Electrolytically plated or coated with zinc
- 7226 99 30 10Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7226 99 30 30Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7226 99 30 90Otherwise plated or coated with zinc: other
- 7226 99 70 11Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
- 7226 99 70 13Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7226 99 70 19Of a width not exceeding 500 mm, hot-rolled, not further: other
- 7226 99 70 91Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
- 7226 99 70 93Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7226 99 70 94Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7226 99 70 96Flat-rolled products of other alloy steel, of a width: other
7227 Stång av annat legerat stål, varmvalsad, i oregelbundet upprullade ringar
- 7227 10 00 00Bars and rods, hot-rolled, in irregularly wound coils: of high-speed steel
- 7227 20 00 00Bars and rods, hot-rolled, in irregularly wound coils: of silico-manganese steel
- 7227 90 10 00Containing by weight 0.0008% or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
- 7227 90 50 00Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum
- 7227 90 95 00Bars and rods, hot-rolled, in irregularly wound coils: other
7228 Annan stång av annat legerat stål; profiler av annat legerat stål; ihåligt borrstål av legerat eller olegerat stål
- 7228 10 20 00Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 10 50 00Bars and rods, of high-speed steel: forged
- 7228 10 90 00Bars and rods, of high-speed steel: other
- 7228 20 10 10Not further worked than hot-rolled, hot-drawn or extruded
- 7228 20 10 91Hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 20 10 99Of rectangular: other
- 7228 20 91 00Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 20 99 00Bars and rods, of silico-manganese steel: other
- 7228 30 20 00Other bars and rods, not further worked than hot-rolled: of tool steel
- 7228 30 41 00Of circular cross-section of a diameter of 80 mm or more
- 7228 30 49 00Containing by weight 0.9% or more but not more than 1.15%: other
- 7228 30 61 0080 mm or more
- 7228 30 69 11Reinforcing bars and rods, containing indentations, ribs, grooves or other deformations
- 7228 30 69 99Less than 80 mm: other
- 7228 30 70 00Of rectangular (other than square) cross-section, hot-rolled on four faces
- 7228 30 89 00Other bars and rods, not further worked than hot-rolled: other
- 7228 40 10 00Other bars and rods, not further worked than forged: of tool steel
- 7228 40 90 00Other bars and rods, not further worked than forged: other
- 7228 50 20 00Other bars and rods, not further worked than cold-formed: of tool steel
- 7228 50 40 00Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum
- 7228 50 61 0080 mm or more
- 7228 50 69 00Less than 80 mm
- 7228 50 80 00Other bars and rods, not further worked than cold-formed: other
- 7228 60 20 10Hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 60 20 90Other bars and rods: of tool steel, other
- 7228 60 80 10Hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 60 80 90Other bars and rods: other
- 7228 70 10 00Not further worked than hot-rolled, hot-drawn or extruded
- 7228 70 90 10Hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 70 90 90Angles, shapes and sections: other
- 7228 80 00 00Hollow drill bars and rods
7229 Tråd av annat legerat stål
- 7229 20 00 10With a cross section with a diameter of 0.6mm to 4mm, containing by weight not more than 0.2% of carbon, 0.6% or more but not more than 1.4% of silicon, and 0.9% or more but not more than 1.9% of manganese, but no other element in a proportion that would give the steel the characteristics of another alloy steel, whether coated with copper or bronze or wax/oil based lubricant or not
- 7229 20 00 90Wire of other alloy steel: of silico-manganese steel, other
- 7229 90 20 00Wire of other alloy steel: other, of high-speed steel
- 7229 90 50 00Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum
- 7229 90 90 00Wire of other alloy steel: other