Den britiske toldtarif (UK Global Tariff)
Den britiske toldtarif (UK Global Tariff), kapitel 84: Atomreaktorer; kedler; maskiner og apparater samt mekaniske redskaber; dele dertil
- 1.294Tarifpositioner
- 0 %–8 %Sats
Kapitel 84 har 1.294 tarifpositioner i den britiske toldtarif, fordelt på 86 positioner.
Satserne går fra 0 % til 8 % (gennemsnit 0,8 %); 868 tarifpositioner har en sats på 0 %.
Flest tarifpositioner, 73, ligger under position 8414 (»Luftpumper, vakuumpumper, luft- og andre gaskompressorer samt…«).
Den hyppigste sats er 0 % (toldfri), som gælder for 868 tarifpositioner.
Den højeste sats, 8 %, gælder for 8482 10 10 15 (»Ball bearings with«).
8401 Atomreaktorer; ikke-bestrålede brændselselementer til atomreaktorer; isotopseparatorer
- 8401 10 00 00Nuclear reactors: nuclear reactors
- 8401 20 00 00Machinery and apparatus for isotopic separation, and parts thereof
- 8401 30 00 20Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors
- 8401 30 00 80Fuel elements (cartridges), non-irradiated: other
- 8401 40 00 10Stainless steel absorber control rods, filled with neutron absorbing chemical elements
- 8401 40 00 90Parts of nuclear reactors: other
8402 Dampkedler (undtagen centralvarmekedler, som også kan producere lavtryksdamp); kedler med overhedning
- 8402 11 00 00Watertube boilers with a steam production exceeding 45 tonnes per hour
- 8402 12 00 00Watertube boilers with a steam production not exceeding 45 tonnes per hour
- 8402 19 10 00Other vapour generating boilers, including hybrid boilers: firetube boilers
- 8402 19 90 00Other vapour generating boilers, including hybrid boilers: other
- 8402 20 00 00Steam or other vapour generating boilers: superheated water boilers
- 8402 90 00 00Steam or other vapour generating boilers: parts
8403 Kedler til centralopvarmning, bortset fra kedler henhørende under pos. 8402
- 8403 10 10 00Central heating boilers other than those of heading 8402: boilers, of cast iron
- 8403 10 90 00Central heating boilers other than those of heading 8402: boilers, other
- 8403 90 10 00Central heating boilers other than those of heading 8402: parts, of cast iron
- 8403 90 90 00Central heating boilers other than those of heading 8402: parts, other
8404 Hjælpeapparater til kedler henhørende under pos. 8402 eller 8403 (fx economisere, overhedere, sodblæsere eller rekuperatorer); kondensatorer til dampmaskiner
8405 Luftgas- og vandgasgeneratorer, også med renseapparater; acetylengasgeneratorer og lignende gasgeneratorer, som arbejder med vand, også med renseapparater
8406 Dampturbiner
- 8406 10 00 00Turbines for marine propulsion
- 8406 81 00 10Industrial steam turbine with: -an output of more than 40 mw but not more than 90 mw, -designed for a pressure of not more than 165 bar and a temperature of not more than 565 ° c, -equipped with individually controlled single or double seat valves on the live steam side which are operated with a hydraulic servo of not more than 30 bar
- 8406 81 00 90Of an output exceeding 40 mw: other
- 8406 82 00 10Industrial steam turbine with: -an output of 2 mw or more but not more than 40 mw, -designed for a pressure of not more than 140 bar and a temperature of not more than 540 ° c, -equipped with single – or double seat valves on the live steam side which are operated with a hydraulic servo of not more than 30 bar
- 8406 82 00 90Of an output not exceeding 40 mw: other
- 8406 90 10 00Stator blades, rotors and their blades
- 8406 90 90 00Steam turbines and other vapour turbines: parts, other
8407 Forbrændingsmotorer med gnisttænding, med frem- og tilbagegående eller roterende stempel
- 8407 10 00 10For use in civil aircraft
- 8407 10 00 20Intended to be fitted in aircraft imported duty free or built within the community
- 8407 10 00 90Spark-ignition reciprocating or rotary internal combustion: aircraft engines, other
- 8407 21 10 00Of a cylinder capacity not exceeding 325 cm³
- 8407 21 91 00Of a power not exceeding 30 kw
- 8407 21 99 00Of a power exceeding 30 kw
- 8407 29 00 00Spark-ignition reciprocating or rotary internal combustion: marine propulsion engines, other
- 8407 31 00 00Of a cylinder capacity not exceeding 50 cm³
- 8407 32 10 00Of a cylinder capacity exceeding 50 cm3 but not exceeding 125 cm3
- 8407 32 90 00Of a cylinder capacity exceeding 125 cm3 but not exceeding 250 cm3
- 8407 33 20 10Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kw or more but not more than 20.0 kw, for the manufacture of: -lawn mowers of subheadings 8433 11, 8433 19 and 8433 20, -tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower, -four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or -snowploughs and snow blowers of subheading 8430 20
- 8407 33 20 90Of a cylinder capacity exceeding 250 cm3 but not exceeding: other
- 8407 33 80 10Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kw or more but not more than 20.0 kw, for the manufacture of: -lawn mowers of subheadings 8433 11, 8433 19 and 8433 20, -tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower, -four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or -snowploughs and snow blowers of subheading 8430 20
- 8407 33 80 20New, single-cylinder, four stroke, spark-ignition internal combustion engine with: -a cylinder capacity exceeding 500cm³ but not exceeding 1000 cm³, -overall dimensions of not more than: 490 mm (length) x 390 mm (width) x 590 mm (height), -a power of 22 kw or more but not more than 35 kw, -equipped with output shaft having an end diameter of 30 mm and a taper of 6 degrees (+/- 1 degree), -whether or not equipped with starter, throttle body, spark plug wire, fuel rail and injector, for use in the manufacture of all-terrain or utility task vehicles
- 8407 33 80 30New, twin-cylinder, four-stroke, spark-ignition internal combustion engine with: -a cylinder capacity exceeding 500 cm³ but not exceeding 1000 cm³, -overall dimensions of not more than: 470 mm (length) x 450 mm (width) x 600 mm (height), -a power of 40 kw or more but not more than 86 kw, -whether or not equipped with overhead camshaft, starter motor, spark plug wires, fuel rail and injectors, for use in the manufacture of all-terrain or utility task vehicles
- 8407 33 80 90Of a cylinder capacity exceeding 500 cm3 but not exceeding: other
- 8407 34 10 10Spark-ignition reciprocating or rotary internal combustion piston engines, with: -a cylinder capacity of 1 200 cm³ or more but not more than 2 000 cm³ -a power of 95 kw but not more than 135 kw, -a weight of not more than 120 kg, for use in the manufacture of motor vehicles of 8703
- 8407 34 10 90For the industrial assembly of: other
- 8407 34 30 00Of a cylinder capacity exceeding 1 000 cm3: other, used
- 8407 34 91 10New dual cylinder, four stroke internal combustion spark-ignition engine with: -a cylinder capacity exceeding 1000 cm³ but not exceeding 1250 cm³, -overall dimensions of not more than: 700 mm (length) x 430 mm (width) x 610 mm (height), -a power of 60 kw or more but not more than 110 kw, -whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator, for use in the manufacture of motorcycle bikes
- 8407 34 91 90Not exceeding 1 500 cm3: other
- 8407 34 99 10New dual cylinder, air cooled, four stroke 49 degree v-twin internal combustion spark-ignition engine with: -a cylinder capacity exceeding 1800 cm³, -overall dimensions of not more than: 800 mm (length) x 500 mm (width) x 600 mm (height), -a power of 60 kw or more but not more than 75kw, -equipped with a dry sump system with an intermediate wet receptacle, -whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator, for use in the manufacture of motorcycle bikes
- 8407 34 99 90Exceeding 1 500 cm3: other
- 8407 90 10 10Four-stroke petrol engines of a cylinder capacity of not more than 250 cm³ for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 8508
- 8407 90 10 40Power unit with a two-stroke engine with: -an output of 900 w or more, but not more than 1 100 w, -a cylinder displacement of more than 24 cm³ but not more than 30 cm³, -a rotation speed of more than 8 400 rpm but not more than 8 600 rpm at maximum power, -an idling speed of more than 2 800 rpm but not more than 3 200 rpm, and -a fuel tank with a capacity of 0.5 l or more, for use in the manufacture of garden machinery and garden machinery components
- 8407 90 10 90Of a cylinder capacity not exceeding 250 cm3: other
- 8407 90 50 00For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 800 cm3; motor vehicles of heading 8705
- 8407 90 80 10Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kw or more but not more than 20.0 kw, for the manufacture of: - lawn mowers of subheadings 8433 11, 8433 19 and 8433 20, - tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower, - four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or - snowploughs and snow blowers of subheading 8430 20
- 8407 90 80 90Of a power not exceeding 10 kw: other
- 8407 90 90 10Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kw or more but not more than 20.0 kw, for the manufacture of: -lawn mowers of subheadings 8433 11, 8433 19 and 8433 20, -tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower, -four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or -snowploughs and snow blowers of subheading 8430 20
- 8407 90 90 20Compact liquid petroleum gas (lpg) engine system, with: - 6 cylinders, - an output of 75 kw or more, but not more than 80 kw, - inlet and exhaust valves modified to operate continuously in heavy duty applications, for use in the manufacture of vehicles of heading 8427
- 8407 90 90 90Of a power exceeding 10 kw: other
8408 Forbrændingsmotorer med kompressionstænding med stempel (diesel- eller semidieselmotorer)
- 8408 10 11 00For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00
- 8408 10 19 00Compression-ignition internal combustion piston engines: marine propulsion engines, used, other
- 8408 10 23 00For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00
- 8408 10 27 00Not exceeding 50 kw: other
- 8408 10 31 00For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00
- 8408 10 39 00Exceeding 50 kw but not exceeding 100 kw: other
- 8408 10 41 00For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00
- 8408 10 49 00Exceeding 100 kw but not exceeding 200 kw: other
- 8408 10 51 00For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00
- 8408 10 59 00Exceeding 200 kw but not exceeding 300 kw: other
- 8408 10 61 00For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00
- 8408 10 69 00Exceeding 300 kw but not exceeding 500 kw: other
- 8408 10 71 00For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00
- 8408 10 79 00Exceeding 500 kw but not exceeding 1 000 kw: other
- 8408 10 81 00For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00
- 8408 10 89 00Exceeding 1 000 kw but not exceeding 5 000 kw: other
- 8408 10 91 00For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00
- 8408 10 99 00Exceeding 5 000 kw: other
- 8408 20 10 00For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 500 cm3; motor vehicles of heading 8705
- 8408 20 31 00Not exceeding 50 kw
- 8408 20 35 00Exceeding 50 kw but not exceeding 100 kw
- 8408 20 37 00For wheeled agricultural or forestry tractors, of a power: exceeding 100 kw
- 8408 20 51 00Not exceeding 50 kw
- 8408 20 55 00Exceeding 50 kw but not exceeding 100 kw
- 8408 20 57 00Exceeding 100 kw but not exceeding 200 kw
- 8408 20 99 00For other vehicles of chapter 87, of a power: exceeding 200 kw
- 8408 90 21 00Compression-ignition internal combustion piston engines: other engines, for rail traction
- 8408 90 27 10For use in civil aircraft
- 8408 90 27 90Compression-ignition internal combustion piston engines: other engines, other, used, other
- 8408 90 41 10For use in civil aircraft
- 8408 90 41 90Not exceeding 15 kw: other
- 8408 90 43 10For use in civil aircraft
- 8408 90 43 90Exceeding 15 kw but not exceeding 30 kw: other
- 8408 90 45 10For use in civil aircraft
- 8408 90 45 90Exceeding 30 kw but not exceeding 50 kw: other
- 8408 90 47 10For use in civil aircraft
- 8408 90 47 90Exceeding 50 kw but not exceeding 100 kw: other
- 8408 90 61 10For use in civil aircraft
- 8408 90 61 90Exceeding 100 kw but not exceeding 200 kw: other
- 8408 90 65 10For use in civil aircraft
- 8408 90 65 20Compression-ignition internal combustion piston engines: -of the inline type, -with a cylinder capacity of 7 000 cm³ or more but not more than 18 100 cm³, -with a power of 205 kw or more but not more than 597 kw, -with an exhaust after-treatment module, -with external width/height/depth dimensions of not more than 1 310/1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm, for use in the manufacture of crushing, screening, separation or compost turning machines
- 8408 90 65 90Exceeding 200 kw but not exceeding 300 kw: other
- 8408 90 67 10For use in civil aircraft
- 8408 90 67 20Compression-ignition internal combustion piston engines: -of the inline type, -with a cylinder capacity of 7 000 cm³ or more but not more than 18 100 cm³, -with a power of 205 kw or more but not more than 597 kw, -with an exhaust after-treatment module, -with external width/height/depth dimensions of not more than 1 310/1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm, for use in the manufacture of crushing, screening, separation or compost turning machines
- 8408 90 67 90Exceeding 300 kw but not exceeding 500 kw: other
- 8408 90 81 10For use in civil aircraft
- 8408 90 81 20Compression-ignition internal combustion piston engines: -of the inline type, -with a cylinder capacity of 7 000 cm³ or more but not more than 18 100 cm³, -with a power of 205 kw or more but not more than 597 kw, -with an exhaust after-treatment module, -with external width/height/depth dimensions of not more than 1 310/1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm, for use in the manufacture of crushing, screening, separation or compost turning machines
- 8408 90 81 90Exceeding 500 kw but not exceeding 1 000 kw: other
- 8408 90 85 10For use in civil aircraft
- 8408 90 85 90Exceeding 1 000 kw but not exceeding 5 000 kw: other
- 8408 90 89 10For use in civil aircraft
- 8408 90 89 90Exceeding 5 000 kw: other
8409 Dele, som udelukkende eller hovedsagelig anvendes til forbrændingsmotorer henhørende under pos. 8407 eller 8408
- 8409 10 00 10For engines for use in civil aircraft
- 8409 10 00 20Intended to be fitted in aircraft imported duty free or built within the community
- 8409 10 00 90Parts suitable for use solely or principally with: for aircraft engines, other
- 8409 91 00 28Carburetor with: -2 mounting holes with a diameter of 31 mm, -a choke bore diameter of 18 mm or more, but not more than 19.05 mm for use in the manufacture of a two-stroke engine grass trimmer
- 8409 91 00 33Camshaft carrier for a spark-ignition piston internal combustion engine, made of adc12 aluminium alloy, with: -a weight of 4.0 kg or more but not more than 5.5 kg, -a wall thickness of 2.0 mm or more but not more than 6.0 mm, for use in the manufacture of motor vehicle engines
- 8409 91 00 35Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with: -an operating pressure of not more than 22.5 mpa, -solenoid direct injector, -analog pressure sensor for not more than 22.5 mpa
- 8409 91 00 38Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of adc12 aluminium alloy, for use in the manufacture of motor vehicle engines
- 8409 91 00 40Fuel injector with solenoid valve for optimised atomisation in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles
- 8409 91 00 45Metal alloy intake and exhaust valve, with a rockwell hardness hrc 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles
- 8409 91 00 50Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm
- 8409 91 00 55Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute
- 8409 91 00 63Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy en ac-45500, with: - no other components, - a hardness of 90hb or more, - casting defects size of not more than 0.4 mm and not more than 10 defects per cm², - a dendrite arm space in combustion chamber of not more than 25 μm, - a double deck water jacket design, - a weight of 14 kg or more but not more than 19 kg, - a length of 460 mm or more but not more than 510 mm, - a height of 260 mm or more but not more than 286 mm and - a width of 140 mm or more but not more than 150 mm
- 8409 91 00 75Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with: -an inlet diameter of 2 mm or more, but not more than 10 mm, -an outlet diameter of 2 mm or more, but not more than 10 mm, -an electric coil with a resistance of 10 ω or more, but not more than 15 ω, which ends in an electrical connection, -a plastic covering moulded around a stainless steel tube
- 8409 91 00 80Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating
- 8409 91 00 83Connecting rod for connecting pistons to the crankshaft of a passenger car engine: • made of an alloy containing 96% steel and the remainder being titanium, vanadium, aluminium, chromium, nickel, copper, phosphorus, silicon, sulphur, manganese, • with two connecting rod bolts, • with a bushing, • of a length of 120 mm or more but not more than 160 mm, • with a surface roughness corresponding to iso 4287-1997, for use in the manufacture of spark ignition motor vehicle engines
- 8409 91 00 90Suitable for use solely or principally with spark-ignition: other
- 8409 99 00 10Injectors with solenoid valve for optimised atomisation in the engine combustion chamber
- 8409 99 00 35The exhaust gas recirculation assembly consisting of: -a control unit, -an air throttle, -an intake pipe, -an outlet hose, for use in the manufacture of compression-ignition combustion engines of motor vehicles
- 8409 99 00 55Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm
- 8409 99 00 70Metal alloy intake and exhaust valve, with a rockwell hardness hrc 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles
- 8409 99 00 75High pressure fuel rail of galvanised ferrite-pearlite steel with: -at least one pressure sensor and one valve, -a length of 314 mm or more but not more than 322 mm, -an operating pressure not more than 225 mpa, -an inlet temperature not more than 95°c, -ambient temperature of -45°c or more but not more than 145°c, for use in the manufacture of compression ignition engines of motor vehicles
- 8409 99 00 90Parts suitable for use solely or principally with: other, other, other
8410 Hydrauliske turbiner, vandhjul og regulatorer dertil
- 8410 11 00 00Of a power not exceeding 1 000 kw
- 8410 12 00 00Of a power exceeding 1 000 kw but not exceeding 10 000 kw
- 8410 13 00 00Of a power exceeding 10 000 kw
- 8410 90 10 00Hydraulic turbines, water wheels, and regulators therefor: parts, including regulators, rotors
- 8410 90 20 00Hydraulic turbines, water wheels, and regulators therefor: parts, including regulators, stators
- 8410 90 90 00Hydraulic turbines, water wheels, and regulators therefor: parts, including regulators, other
8411 Turboreaktorer, propelturbiner og andre gasturbiner
- 8411 11 00 10For use in civil aircraft
- 8411 11 00 20Intended to be fitted in aircraft imported duty free or built within the community
- 8411 11 00 90Of a thrust not exceeding 25 kn: other
- 8411 12 10 10For use in civil aircraft
- 8411 12 10 20Intended to be fitted in aircraft imported duty free or built within the community
- 8411 12 10 90Of a thrust exceeding 25 kn but not exceeding 44 kn: other
- 8411 12 30 10For use in civil aircraft
- 8411 12 30 20Intended to be fitted in aircraft imported duty free or built within the community
- 8411 12 30 90Of a thrust exceeding 44 kn but not exceeding 132 kn: other
- 8411 12 80 10For use in civil aircraft
- 8411 12 80 20Intended to be fitted in aircraft imported duty free or built within the community
- 8411 12 80 90Of a thrust exceeding 132 kn: other
- 8411 21 00 10For use in civil aircraft
- 8411 21 00 20Intended to be fitted in aircraft imported duty free or built within the community
- 8411 21 00 90Of a power not exceeding 1 100 kw: other
- 8411 22 20 10For use in civil aircraft
- 8411 22 20 20Intended to be fitted in aircraft imported duty free or built within the community
- 8411 22 20 90Of a power exceeding 1 100 kw but not exceeding 3 730 kw: other
- 8411 22 80 10For use in civil aircraft
- 8411 22 80 20Intended to be fitted in aircraft imported duty free or built within the community
- 8411 22 80 90Of a power exceeding 3 730 kw: other
- 8411 81 00 10For use in civil aircraft
- 8411 81 00 90Of a power not exceeding 5 000 kw: other
- 8411 82 20 10For use in civil aircraft
- 8411 82 20 90Of a power exceeding 5 000 kw but not exceeding 20 000 kw: other
- 8411 82 60 10For use in civil aircraft
- 8411 82 60 90Of a power exceeding 20 000 kw but not exceeding 50 000 kw: other
- 8411 82 80 10For use in civil aircraft
- 8411 82 80 90Of a power exceeding 50 000 kw: other
- 8411 91 00 10For use in civil aircraft
- 8411 91 00 20Intended to be fitted in aircraft imported duty free or built within the community
- 8411 91 00 90Of turbojets or turbopropellers: other
- 8411 99 00 10Of gas turbines, for use in civil aircraft
- 8411 99 00 20Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: - of a precision-cast nickel based alloy complying with standard din g- nicr13al6monb or din g- nicr13al16monb or din g- nico10w10cr9alti or din g- nicr12al6monb or ams aisi:686, - with a heat-resistance of not more than 1 100 °c, - with a diameter of 28 mm or more, but not more than 180 mm, - with a height of 20 mm or more, but not more than 150 mm
- 8411 99 00 30Turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm
- 8411 99 00 45Turbine ring segments, guide and rotor blades as parts of a stationary gas turbine for power generation or as a mechanical drive - made of nickel-based superalloys, - for an operating temperature of more than 600 k but not more than 1600 k, - with a length of not more than 500 mm, - with a width of not more than 900 mm, - with a height of not more than 1300 mm
- 8411 99 00 99Turbojets, turbopropellers and other gas turbines: parts, other, other, other
8412 Andre kraftmaskiner og motorer
- 8412 10 00 10For use in civil aircraft
- 8412 10 00 20Intended to be fitted in aircraft imported duty free or built within the community
- 8412 10 00 90Reaction engines other than turbojets: other
- 8412 21 20 10For use in civil aircraft
- 8412 21 20 90Hydraulic power engines and motors: linear acting (cylinders), hydraulic systems, other
- 8412 21 80 10For use in civil aircraft
- 8412 21 80 30Linear acting hydraulic cylinder of a kind used in the machines for handling cargo containers: -with a weight of 45 kg or more but not more than 57 kg, -with a diameter of 119 mm or more but not more than 149 mm, -with a length of 779 mm or more but not more than 1141 mm, -with a stroke of 450 mm or more but not more than 610 mm, -adapted to work with hydraulic oil at a working pressure of 22 mpa or more but not more than 23 mpa, -whether or not with a maintenance-free bearing without the need for lubrication
- 8412 21 80 40Linear acting hydraulic cylinder of a kind used in the arms of machines for handling cargo containers: -with a weight of 827 kg or more but not more than 935 kg, -with a diameter of 250 mm or more but not more than 330 mm, -with a length of 3480 mm or more but not more than 4115 mm, -with a stroke of 2750 mm or more but not more than 3180 mm, -adapted to work with hydraulic oil at a working pressure of 23 mpa, -whether or not with a maintenance-free bearing without the need for lubrication
- 8412 21 80 90Hydraulic power engines and motors: linear acting (cylinders), other, other
- 8412 29 20 10For use in civil aircraft
- 8412 29 20 90Hydraulic power engines and motors: other, hydraulic systems, other
- 8412 29 81 10For use in civil aircraft
- 8412 29 81 90Hydraulic fluid power motors: other
- 8412 29 89 10For use in civil aircraft
- 8412 29 89 90Hydraulic power engines and motors: other, other, other, other
- 8412 31 00 10For use in civil aircraft
- 8412 31 00 90Pneumatic power engines and motors: linear acting (cylinders), other
- 8412 39 00 10For use in civil aircraft
- 8412 39 00 20Actuator for a single-stage turbocharger, with: - ¬a pressure inlet pipe and a control rod with a working stroke of 15mm or more but not more than 40mm, - a maximum length of the actuator including control rod of not more than 400mm, - ¬a maximum diameter of the can at the widest point of not more than 140mm, and - a maximum height of the can without control rod of not more than 140mm
- 8412 39 00 90Pneumatic power engines and motors: other, other
- 8412 80 10 00Steam or other vapour power engines
- 8412 80 80 10For use in civil aircraft
- 8412 80 80 90Other engines and motors: other, other, other
- 8412 90 20 10For use in civil aircraft
- 8412 90 20 20Intended to be fitted in aircraft imported duty free or built within the community
- 8412 90 20 90Of reaction engines other than turbojets: other
- 8412 90 40 10For use in civil aircraft
- 8412 90 40 90Of hydraulic power engines and motors: other
- 8412 90 60 00Other engines and motors: parts, wind turbine blades
- 8412 90 70 10For use in civil aircraft
- 8412 90 70 20Bedplate made of solution strengthened ductile iron castings (ssdi), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with: -a length of 3.5 m or more but not more than 4.5 m, -a width of 2 m or more but not more than 4.2 m, -a height of 1 m or more, but not more than 1.3 m, -a weight of 11 tons or more but not more than 21.5 tons, -mounting bores for yawdrive, -a mounting flange for gearbox support, -drivetrain mount, -different screw sockets
- 8412 90 70 30Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (ssdi), with: -a diameter of 2 m or more, but not more than 5 m, -a weight of 2 tons or more but not more than 7 tons
- 8412 90 70 90Other engines and motors: parts, other, other
8413 Væskepumper, også med målere; væskeelevatorer
- 8413 11 00 00Pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages
- 8413 19 00 10For use in civil aircraft
- 8413 19 00 90Pumps fitted or designed to be fitted with a measuring: other, other
- 8413 20 00 10For use in civil aircraft
- 8413 20 00 90Handpumps, other than those of subheading 8413 11 or 8413 19: other
- 8413 30 20 10For use in civil aircraft
- 8413 30 20 30Single-cylinder radial-piston high pressure pump for gasoline direct injection with: - an operating pressure of 200 bar or more, but not more than 350 bar, - a flow control, and - a pressure relief valve, for use in the manufacture of engines of motor vehicles
- 8413 30 20 40High-pressure plunger pump for direct diesel injection, with: -an operating pressure of not more than 275 mpa, -a camshaft, -a fluid discharging of 15 cm³ per minute or more, but not more than 1 800 cm³ per minute, -an electric pressure regulating valve
- 8413 30 20 60High-pressure plunger pump for direct petrol injection: -with an operating pressure of not more than 90 mpa, -designed to contact the crankshaft, -with an electromagnetic valve
- 8413 30 20 90Fuel, lubricating or cooling medium pumps for internal: injection pumps, other
- 8413 30 80 10For use in civil aircraft
- 8413 30 80 20Electric water pump ensuring the functionality of the water circuit also when the motor is temporarily switched off, for operating dc voltage of 9 v or more but not more than 16 v, with: -capacity - pressure 0.075 mpa at 3 800 rpm, -discharge of 12 l/min, -whether or not with connecting cable with connector, and -mounting bracket, for use in the manufacture of goods of chapter 87
- 8413 30 80 90Fuel, lubricating or cooling medium pumps for internal: other, other
- 8413 40 00 00Pumps for liquids, whether or not fitted with a measuring: concrete pumps
- 8413 50 20 10For use in civil aircraft
- 8413 50 20 90Other reciprocating positive displacement pumps: hydraulic units, other
- 8413 50 40 10For use in civil aircraft
- 8413 50 40 90Dosing and proportioning pumps: other
- 8413 50 61 10For use in civil aircraft
- 8413 50 61 90Other reciprocating positive displacement pumps: other, piston pumps, hydraulic fluid power, other
- 8413 50 69 10For use in civil aircraft
- 8413 50 69 90Other reciprocating positive displacement pumps: other, piston pumps, other, other
- 8413 50 80 10For use in civil aircraft
- 8413 50 80 90Other reciprocating positive displacement pumps: other, other, other
- 8413 60 20 10For use in civil aircraft
- 8413 60 20 90Other rotary positive displacement pumps: hydraulic units, other
- 8413 60 31 10For use in civil aircraft
- 8413 60 31 90Other rotary positive displacement pumps: other, gear pumps, hydraulic fluid power, other
- 8413 60 39 10For use in civil aircraft
- 8413 60 39 90Other rotary positive displacement pumps: other, gear pumps, other, other
- 8413 60 61 10For use in civil aircraft
- 8413 60 61 90Other rotary positive displacement pumps: other, vane pumps, hydraulic fluid power, other
- 8413 60 69 10For use in civil aircraft
- 8413 60 69 90Other rotary positive displacement pumps: other, vane pumps, other, other
- 8413 60 70 10For use in civil aircraft
- 8413 60 70 90Other rotary positive displacement pumps: other, screw pumps, other
- 8413 60 80 10For use in civil aircraft
- 8413 60 80 90Other rotary positive displacement pumps: other, other, other
- 8413 70 21 00Pumps for liquids, whether or not fitted with a measuring: other centrifugal pumps, submersible pumps, single-stage
- 8413 70 29 00Pumps for liquids, whether or not fitted with a measuring: other centrifugal pumps, submersible pumps, multi-stage
- 8413 70 30 00Glandless impeller pumps for heating systems and warm water supply
- 8413 70 35 10For use in civil aircraft
- 8413 70 35 89Not exceeding 15 mm: other
- 8413 70 45 10For use in civil aircraft
- 8413 70 45 90Channel impeller pumps and side channel pumps: other
- 8413 70 51 10For use in civil aircraft
- 8413 70 51 20Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 w and soldered safety devices, monobloc with the motor, with: -a discharge outlet diameter of 20 mm or more, -9 slots stator, -6 pole rotor, -rated power of 95 w, -volute with straight outlet, -rotor chamber without sand filter
- 8413 70 51 30Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 w and soldered safety devices, monobloc with the motor, with: -a discharge outlet diameter of 20 mm or more, -9 slots stator, -6 pole rotor, -rated power of 95 w, -volute with clamped rubber hose outlet, -rotor chamber without sand filter
- 8413 70 51 40Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft, monobloc with the motor, volute with integrated heater, with: -a discharge outlet diameter of 20 mm or more, -9 slots square or chain pole stator, -6 pole rotor, -ferritic or rare earth magnets, -rated power of 95 w or 80 w, -heater of nominal power of 1800 w and soldered or laser welded safety, devices, -volute with or without clamped rubber outlet, -rotor chamber with ultrasonic welded sand filter
- 8413 70 51 90With single entry impeller: monobloc, other
- 8413 70 59 10For use in civil aircraft
- 8413 70 59 90With single entry impeller: other, other
- 8413 70 65 10For use in civil aircraft
- 8413 70 65 90With more than one entry impeller: other
- 8413 70 75 10For use in civil aircraft
- 8413 70 75 90Other, with a discharge outlet diameter: exceeding 15 mm, radial flow pumps, multi-stage, other
- 8413 70 81 10For use in civil aircraft
- 8413 70 81 90Other, with a discharge outlet diameter: exceeding 15 mm, other centrifugal pumps, single-stage, other
- 8413 70 89 10For use in civil aircraft
- 8413 70 89 90Other, with a discharge outlet diameter: exceeding 15 mm, other centrifugal pumps, multi-stage, other
- 8413 81 00 10For use in civil aircraft
- 8413 81 00 90Other pumps; liquid elevators: pumps, other
- 8413 82 00 00Other pumps; liquid elevators: liquid elevators
- 8413 91 00 10For use in civil aircraft
- 8413 91 00 30Fuel pump cover: - consisting of aluminum alloys, - with a diameter of 38 mm or 50 mm, - with two concentric, annular grooves formed on its surface, - anodised, of a kind used in motor vehicles with petrol engines
- 8413 91 00 50Pump head for two cylinder high pressure pump made of forged steel, with: - milled threaded fittings with a diameter of 10 mm or more but not more than 36.8 mm, and - drilled fuel channels with a diameter of 3.5 mm or more but not more than 10 mm of a kind used in diesel injection systems
- 8413 91 00 90Pumps for liquids, whether or not fitted with a measuring: parts, of pumps, other
- 8413 92 00 00Pumps for liquids, whether or not fitted with a measuring: parts, of liquid elevators
8414 Luftpumper, vakuumpumper, luft- og andre gaskompressorer samt ventilatorer; emhætter med indbygget ventilator, også med filter; gastætte biologiske sikkerhedskabinetter, også med filter
- 8414 10 15 00Of a kind used for the manufacture of semiconductors or solely or principally used for the manufacture of flat panel displays
- 8414 10 25 10For use in civil aircraft
- 8414 10 25 30Tandem pump consisting of: -an oil pump with displacement of 21.6 cc/rev (± 2 cc/rev) and working pressure 1.5 bar at 1 000 revolutions per minute, -vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute for use in the manufacture of engines of motor vehicles
- 8414 10 25 90Rotary piston pumps, sliding vane rotary pumps, molecular: other
- 8414 10 81 10For use in civil aircraft
- 8414 10 81 90Diffusion pumps, cryopumps and absorption pumps: other
- 8414 10 89 10For use in civil aircraft
- 8414 10 89 90Air or vacuum pumps, air or other gas compressors and fans: vacuum pumps, other, other, other, other
- 8414 20 20 00Hand- or foot-operated air pumps: handpumps for cycles
- 8414 20 80 10For use in civil aircraft
- 8414 20 80 90Hand- or foot-operated air pumps: other, other
- 8414 30 20 10For use in civil aircraft
- 8414 30 20 60Hermetic compressor for r290 refrigerant for the production of refrigerators and freezers: -with a power not exceeding 0.4 kw, -pre-filled with lubricant from 190 ml to 210 ml, -suction and processing pipe inner diameter from 6.40 mm to 6.60 mm, -discharge pipe inner diameter from 4.80 mm to 5.00 mm, -driven by a brushless dc motor, -cooling capacity from 340 to 360 w at ashrae lbp 3000 rpm, -displacement from 6.5 cm³ to 7.5 cm³, -speed range from 1.600 rpm to 4.200 rpm
- 8414 30 20 90Of a power not exceeding 0.4 kw: other
- 8414 30 81 10For use in civil aircraft
- 8414 30 81 50Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0.5 kw or more but not more than 10 kw, with a displacement volume of not more than 35 cm³, of the type used in refrigeration equipment
- 8414 30 81 60Hermetic rotary compressors for either hydrofluorocarbon (hfc) or hydrocarbon refrigerants: - driven by ‘on-off’ single phase alternate current (ac) or ‘brushless direct current’ (bldc) variable speed motors, - with a nominal power rating of not more than 1.5kw, - a rated voltage of 100v or more but not more than 240v, - with a height of not more than 300mm, - an external diameter of not more than 150mm, - with a unit weight of not more than 15kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers
- 8414 30 81 89Of a power exceeding 0.4 kw: hermetic or semi-hermetic, other, other
- 8414 30 89 10For use in civil aircraft
- 8414 30 89 20Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0.4 kw but not more than 10 kw
- 8414 30 89 40Electrical compressor for motor vehicle air conditioning system: -with a power output of more than 0.4 kw but not exceeding 10 kw, for use in the manufacture of motor vehicles of subheading 8703 40
- 8414 30 89 90Of a power exceeding 0.4 kw: other, other
- 8414 40 10 00Giving a flow per minute not exceeding 2 m3
- 8414 40 90 00Giving a flow per minute exceeding 2 m3
- 8414 51 00 10For use in civil aircraft
- 8414 51 00 90Table, floor, wall, window, ceiling or roof fans, with: other
- 8414 59 15 00Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines
- 8414 59 25 10For use in civil aircraft
- 8414 59 25 50Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with -a direct current operating voltage of more than 10 v but not more than 14 v, or -an alternating current operating voltage of more than 185 v, but not more than 254 v, -an operating temperature of -40 °c or higher, but not higher than 70 °c, for use in the manufacture of heat pump tumble dryers and refrigerators or freezers
- 8414 59 25 60Axial fan, for incorporation into instrument clusters, speedometers and infotainment systems of transport vehicles as motor vehicles of headings 8701 to 8705, with: -an air flow of not more than 0.75 m3/min (cubic meter per minute) -an air pressure of not more than 10 mmh2o -an overall acoustic noise of not more than 45 db(a) -a diameter of not more than 65mm equipped with dc brushless motor with: -a rated voltage between: 3 to 16 vdc -an operating voltage between: 3 to 16 vdc -a rated current between: 0.03 to 0.30 a -an input power between: 0.3 to 1.5 w -a rotation speed between: 2500 to 10000 r.p.m, with or without a heat sink incorporated
- 8414 59 25 90Air or vacuum pumps, air or other gas compressors and fans: fans, other, other, axial fans, other
- 8414 59 35 10For use in civil aircraft
- 8414 59 35 20Radial fan, with: -a dimension of 25mm (height) x 85mm (width) x 85mm (depth), -a weight of 120 g, -a rated voltage of 13.6 vdc (direct current voltage), -an operating voltage of 9 vdc or more but not more than 16 vdc (direct current voltage), -a rated current of 1.1 a (typ), -a rated power of 15 w, -a rotation speed of 500 rpm (revolutions per minute) or more but not more than 4800 rpm (revolutions per minute) (free flow), -an air flow of not more than 17.5 litre/s, -an air pressure of not more than16 mm h2o ≈ 157 pa, -an overall sound pressure of not more than 58 db(a) at 4800 rpm (revolutions per minute), and with a fin (fan interconnect network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems
- 8414 59 35 30Electric blower for cooling the high-voltage battery of a hybrid passenger car with: -a control unit, -mosfet inverter, -a voltage of 9 v or more but not more than 16 v, -ambient temperature of - 40 °c or more, but not more than 80 °c, for use in the manufacture of hybrid passenger cars
- 8414 59 35 40Electric blower for cooling the battery module: -with an operating voltage of 9 vdc or more but not more than 16 vdc, -with a centrifugal electric fan, -with a connector, -with a plastic case, -with or without a control unit for the fan electric motor, for use in the production of rechargeable batteries for hybrid and electric vehicles
- 8414 59 35 50Dc motor centrifugal fan with: -a nominal voltage of 8 v or more, but not more than 13 v, -a nominal maximum speed of 1400 rpm or more, but not more than 1950 rpm, -a horizontal or vertical position of the fan blades shaft, -a boosting time of not more than 10 seconds, -a cable with a length of 30 cm or more, but not more than 50 cm, with rast 2.5 connector, -a nominal power of 0.7 w or more, but not more than 3.5 w, -a tacho or feedback signal to monitor the speed
- 8414 59 35 90Air or vacuum pumps, air or other gas compressors and fans: fans, other, other, centrifugal fans, other
- 8414 59 95 10For use in civil aircraft
- 8414 59 95 90Air or vacuum pumps, air or other gas compressors and fans: fans, other, other, other, other
- 8414 60 00 00Hoods having a maximum horizontal side not exceeding 120 cm
- 8414 70 00 00Gas-tight biological safety cabinets
- 8414 80 11 10For use in civil aircraft
- 8414 80 11 90Air or vacuum pumps, air or other gas compressors and fans: other, turbo-compressors, single-stage, other
- 8414 80 19 10For use in civil aircraft
- 8414 80 19 90Air or vacuum pumps, air or other gas compressors and fans: other, turbo-compressors, multi-stage, other
- 8414 80 22 10For use in civil aircraft
- 8414 80 22 20Air membrane compressor with: - a flow of 4.5 l/min or more, but not more than 12 l/min, - power input of not more than 14 w, and - a gauge pressure capacity not exceeding 400 hpa (0.4 bar) of a kind used in the production of motor vehicle seats
- 8414 80 22 90Not exceeding 60 m3: other
- 8414 80 28 10For use in civil aircraft
- 8414 80 28 90Not exceeding 15 bar, giving a flow per hour: exceeding 60 m3, other
- 8414 80 51 10For use in civil aircraft
- 8414 80 51 90Not exceeding 120 m3: other
- 8414 80 59 10For use in civil aircraft
- 8414 80 59 90Exceeding 15 bar, giving a flow per hour: exceeding 120 m3, other
- 8414 80 73 10For use in civil aircraft
- 8414 80 73 30Hermetic rotary compressors for either hydrofluorocarbon (hfc) or hydrocarbon refrigerants: - driven by ‘on-off’ single phase alternate current (ac) or ‘brushless direct current’ (bldc) variable speed motors, - with a nominal power rating of not more than 1.5kw, - a rated voltage of 100v or more but not more than 240v, - with a height of not more than 300mm, - an external diameter of not more than 150mm, - with a unit weight of not more than 15kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers
- 8414 80 73 50Hermetic heat pump compressor for r450a or r290 refrigerants: - not charged with refrigerant, - pre-charged with lubricant oil, - with a single phase induction permanent split capacitor motor or a dc brushless motor, - having suction and/or discharge connections, - with a displacement of 8.05 cm3 or more, but not more than 55 cm3, - running at 900 rpm or more, but not more than 7 800 rpm, and - with a cooling capacity of 920 w or more, but not more than 10 440 w in ashrae conditions
- 8414 80 73 89Air or vacuum pumps, air or other gas compressors and fans: other, rotary displacement compressors, single-shaft, other, other
- 8414 80 75 10For use in civil aircraft
- 8414 80 75 90Air or vacuum pumps, air or other gas compressors and fans: other, rotary displacement compressors, multi-shaft, screw compressors, other
- 8414 80 78 10For use in civil aircraft
- 8414 80 78 90Air or vacuum pumps, air or other gas compressors and fans: other, rotary displacement compressors, multi-shaft, other, other
- 8414 80 80 10For use in civil aircraft
- 8414 80 80 90Air or vacuum pumps, air or other gas compressors and fans: other, other, other
- 8414 90 00 10For use in civil aircraft
- 8414 90 00 15Fan assembly made of aluminium and magnesium alloy: -with an outer diameter of 54 mm or more but not more than 130 mm, -with a height of 8 mm or more but not more than 30 mm, -with two discs connected by blades of involute shape, -with or without dowel, and with or without washer, for use in the manufacture of electromotors
- 8414 90 00 20Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles
- 8414 90 00 25Scroll type compressor housing of an aluminium alloy of a kind with: -a heat resistance of 200 °c or more but not more than 250 °c, -one or more fixing points suitable for mounting an actuator, for use in the manufacture of turbochargers
- 8414 90 00 35Compressor head unit made of impregnated aluminium alloy for installation in air-conditioning compressors for motor vehicles with: -a width of 115 mm or more but not more than 160 mm, -a length of 115 mm or more but not more than 170 mm, -a height of 30 mm or more but not more than 100 mm, -a piece of pressure branch with pipe connection, -one or two mounting holes and -more than one overflowing hole
- 8414 90 00 45Pressure casted rotor front plate or cover of an electric supercharger: -of en ac-46000 aluminium, -shot-blasted and machined, -with a hardness of 60 or more on the hardness brinell wolfram (hbw) scale (2.5/62.5, according to iso 6506), -with a tensile strength of 240 n/mm2 or more, -with a height of 22 mm or more but not more than 26 mm, -with a diameter of 128 mm or more but not more than 136 mm, -with a weight of 220 g or more but not more than 250 g
- 8414 90 00 55Air conditioning compressor housing component made of aluminum alloy for installation in electric air conditioning compressors for motor vehicles: -with a width of 100 mm or more but not more than 220 mm, -with a length of 100 mm or more but not more than 230 mm, -with a height of 80 mm or more but not more than 180 mm, -with one single central bore, -machined by cnc milling or unwrought, -whether or not impregnated, -with one suction port or without
- 8414 90 00 80Turbocharger wheel housing of cast aluminium alloy or cast iron: - with a heat resistance up to 400°c, - with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel, for use in the automotive industry
- 8414 90 00 90Air or vacuum pumps, air or other gas compressors and fans: parts, other
8415 Luftkonditioneringsmaskiner bestående af en motordreven ventilator og elementer til ændring af luftens temperatur og fugtighed, herunder maskiner uden mulighed for særskilt regulering af fugtighedsgraden
- 8415 10 10 10Of a kind designed to be fixed to a window, wall, ceiling: self-contained, pre-charged with hydrofluorocarbons (hfcs)
- 8415 10 10 90Of a kind designed to be fixed to a window, wall, ceiling: self-contained, other
- 8415 10 90 10Of a kind designed to be fixed to a window, wall, ceiling: split-system, pre-charged with hydrofluorocarbons (hfcs)
- 8415 10 90 90Of a kind designed to be fixed to a window, wall, ceiling: split-system, other
- 8415 20 00 10Of a kind used for persons, in motor vehicles: pre-charged with hydrofluorocarbons (hfcs)
- 8415 20 00 90Of a kind used for persons, in motor vehicles: other
- 8415 81 00 10For use in civil aircraft
- 8415 81 00 91Incorporating a refrigerating unit and a valve for reversal: other, pre-charged with hydrofluorocarbons (hfcs)
- 8415 81 00 99Incorporating a refrigerating unit and a valve for reversal: other, other
- 8415 82 00 10For use in civil aircraft
- 8415 82 00 91Other, incorporating a refrigerating unit: other, pre-charged with hydrofluorocarbons (hfcs)
- 8415 82 00 99Other, incorporating a refrigerating unit: other, other
- 8415 83 00 10For use in civil aircraft
- 8415 83 00 90Not incorporating a refrigerating unit: other
- 8415 90 00 10Of air conditioning machines of subheading nos 8415 81, 8415 82 or 8415 83, for use in civil aircraft
- 8415 90 00 15Electrically welded manifolds for the condenser in automotive air conditioning systems: -consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding, -containing internal baffles responsible for the proper flow of coolant, -with a length of 190 mm or more, but not more than 460 mm, -with a diameter of 9 mm or more, but not more than 42 mm, -with a weight of 0.01 kg or more, but not more than 0.45 kg, -whether or not having aluminium connection blocks, used in the production of air conditioning systems in vehicles of chapter 87
- 8415 90 00 45Aluminium connecting block for automotive air conditioning systems: -with a t6 hardening, -equipped with round stubs with a circumferential outer groove, -with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm, -with a distance between holes of 15 mm or more but not more than 22 mm, -with sockets designed for brazing or clamping, -with mounting holes for m6 or m8 mounting screw, threaded or not, -with a width of 5 mm or more but not more than 16 mm, -for connecting a compressor, a condenser, an evaporator, a chiller and other lines
- 8415 90 00 60Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with: -extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm, -a weight of 0.02 kg or more but not more than 0.25 kg
- 8415 90 00 91Air-conditioning machines, comprising a motor-driven: parts, pre-charged with hydrofluorocarbons (hfcs)
- 8415 90 00 99Air-conditioning machines, comprising a motor-driven: parts, other
8416 Fyringsaggregater til flydende brændstof, pulveriseret fast brændsel eller gas; mekaniske stokere samt mekaniske riste, mekaniske askeudtømningsapparater og lignende apparater dertil
- 8416 10 10 00Incorporating an automatic control device
- 8416 10 90 00Furnace burners for liquid fuel: other
- 8416 20 10 00Only for gas, monobloc, incorporating a ventilator and a control device
- 8416 20 20 00Other furnace burners, including combination burners: other, combination burners
- 8416 20 80 00Other furnace burners, including combination burners: other, other
- 8416 30 00 00Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances
- 8416 90 00 00Furnace burners for liquid fuel, for pulverised solid fuel: parts
8417 Industri- og laboratorieovne, herunder forbrændingsovne (undtagen elektriske ovne henhørende under pos. 8514)
- 8417 10 00 00Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals
- 8417 20 10 00Bakery ovens, including biscuit ovens: tunnel ovens
- 8417 20 90 00Bakery ovens, including biscuit ovens: other
- 8417 80 30 00Ovens and furnaces for firing ceramic products
- 8417 80 50 00Ovens and furnaces for firing cement, glass or chemical products
- 8417 80 70 00Industrial or laboratory furnaces and ovens, including: other, other
- 8417 90 00 00Industrial or laboratory furnaces and ovens, including: parts
8418 Køleskabe, frysere og andre maskiner og apparater til køling og frysning, elektriske og andre; varmepumper, undtagen luftkonditioneringsmaskiner henhørende under pos. 8415
- 8418 10 20 10For use in civil aircraft
- 8418 10 20 91Of a capacity exceeding 340 litres: other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 10 20 99Of a capacity exceeding 340 litres: other, other
- 8418 10 80 10For use in civil aircraft
- 8418 10 80 91Combined refrigerator-freezers, fitted with separate: other, other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 10 80 99Combined refrigerator-freezers, fitted with separate: other, other, other
- 8418 21 10 10Of a capacity exceeding 340 litres: pre-charged with hydrofluorocarbons (hfcs)
- 8418 21 10 90Of a capacity exceeding 340 litres: other
- 8418 21 51 10Refrigerators, freezers and other refrigerating or freezing: refrigerators, household type, compression-type, other, table model, pre-charged with hydrofluorocarbons (hfcs)
- 8418 21 51 90Refrigerators, freezers and other refrigerating or freezing: refrigerators, household type, compression-type, other, table model, other
- 8418 21 59 10Refrigerators, freezers and other refrigerating or freezing: refrigerators, household type, compression-type, other, building-in type, pre-charged with hydrofluorocarbons (hfcs)
- 8418 21 59 90Refrigerators, freezers and other refrigerating or freezing: refrigerators, household type, compression-type, other, building-in type, other
- 8418 21 91 10Not exceeding 250 litres: pre-charged with hydrofluorocarbons (hfcs)
- 8418 21 91 90Not exceeding 250 litres: other
- 8418 21 99 10Exceeding 250 litres but not exceeding 340 litres: pre-charged with hydrofluorocarbons (hfcs)
- 8418 21 99 90Exceeding 250 litres but not exceeding 340 litres: other
- 8418 29 00 10Refrigerators, freezers and other refrigerating or freezing: refrigerators, household type, other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 29 00 90Refrigerators, freezers and other refrigerating or freezing: refrigerators, household type, other, other
- 8418 30 20 10For use in civil aircraft
- 8418 30 20 91Of a capacity not exceeding 400 litres: other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 30 20 99Of a capacity not exceeding 400 litres: other, other
- 8418 30 80 10For use in civil aircraft
- 8418 30 80 91Of a capacity exceeding 400 litres but not exceeding 800: other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 30 80 99Of a capacity exceeding 400 litres but not exceeding 800: other, other
- 8418 40 20 10For use in civil aircraft
- 8418 40 20 91Of a capacity not exceeding 250 litres: other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 40 20 99Of a capacity not exceeding 250 litres: other, other
- 8418 40 80 10For use in civil aircraft
- 8418 40 80 91Of a capacity exceeding 250 litres but not exceeding 900: other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 40 80 99Of a capacity exceeding 250 litres but not exceeding 900: other, other
- 8418 50 11 10For frozen food storage: pre-charged with hydrofluorocarbons (hfcs)
- 8418 50 11 90For frozen food storage: other
- 8418 50 19 10Refrigerated showcases and counters: other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 50 19 90Refrigerated showcases and counters: other, other
- 8418 50 90 10Other furniture: other refrigerating furniture, pre-charged with hydrofluorocarbons (hfcs)
- 8418 50 90 90Other furniture: other refrigerating furniture, other
- 8418 61 00 10For use in civil aircraft
- 8418 61 00 91Heat pumps other than air conditioning machines of heading: other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 61 00 99Heat pumps other than air conditioning machines of heading: other, other
- 8418 69 00 10For use in civil aircraft
- 8418 69 00 91Other refrigerating or freezing equipment; heat pumps: other, other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 69 00 99Other refrigerating or freezing equipment; heat pumps: other, other, other
- 8418 91 00 00Furniture designed to receive refrigerating or freezing equipment
- 8418 99 10 10For use in certain types of aircraft
- 8418 99 10 81Evaporators and condensers, excluding those: other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 99 10 87Evaporators and condensers, excluding those: other, other
- 8418 99 90 10Of refrigerating equipment adapted to the air-conditioning system, for use in certain types of aircraft
- 8418 99 90 20Aluminium connecting block for connecting to a condenser manifold in welding process: -hardened to t6 or t5 temper, -with a weight of not more than 150 g, -with a length of 20 mm or more but not more than 150 mm, -with a fixing rail in one piece
- 8418 99 90 30Receiver dryer profile for connecting to a condenser manifold in welding process with: -a braze flatness of not more than 0.2 mm, -a weight of 100 g or more but not more than 600 g, -a fixing rail in one piece
- 8418 99 90 50Heat exchanger evaporator, used in domestic refrigerators and freezers and their combinations: -with external dimensions of 362 mm x 244 mm x 60 mm or more but not more than 398.4 mm x 503 mm x 60 mm, -with 229 mm to 307 mm aluminium radiator fins with external dimensions of 60 mm x 26.7 mm or more but not more than 60.2 mm x 27.3 mm, -with an aluminium tube with an external diameter of 8.3 mm or more but not more than 8.5 mm, -with not more than two heaters with a power of 40 w or more but not more than 140 w, equipped with cables with connectors, -with or without two thermal fuses with a melting point of 77 °c, equipped with cables with connectors
- 8418 99 90 60Condenser for refrigerators or refrigerators with freezers of the household type equipped at least with: -a steel pipe with a diameter from 4.68 mm to 4.81 mm, a wall thickness from 0.52 mm to 0.65 mm, -26-30 pcs of horizontal pipe sections, each straight with a length from 450 mm to 455 mm, placed every 40 mm between each horizontal part, -from 112 to 174 pcs welded steel rods with a diameter of 1.3 mm and a length of 1 002 mm or more but not more than 1 322 mm, -3 clips, -4 brackets welded between the rods
- 8418 99 90 70Household appliances condenser, being a type of heat exchanger, made entirely of aluminium a3102, a3003, a4045 or a4343, consisting of two vertical pipes and arranged horizontally between them 16 parallel flat tubes with fins, with: -one vertical pipe with inlet and outlet tubes, -a width of 297 mm or more, but not more than 373 mm, -a height of 154 mm or more, but not more than 158 mm, -a depth of 17 mm or more, but not more than 23 mm, -a flatness tolerance of less than 2 mm for the fin pack within the condenser core, -a weight of 224 g or more, but not more than 283 g
- 8418 99 90 80An evaporator being a type of heat exchanger, consisting of aluminium pipes with copper ends enclosed with aluminium radiators: -measuring 337 x 237 x 17 mm or more, but not more than 868 x 399 x 78 mm, -with a total weight of a set of 236 g or more, but not more than 1 750 g, -with a fixed sensor, -with or without noise absorber, -with 2, 5 or 7 control and power connection pins terminated with sensor temperature type of socket, with or without heater and fuse type of socket, for use in the manufacture of products of subheadings 8418 10, 8418 21, 8418 40
- 8418 99 90 91Refrigerators, freezers and other refrigerating or freezing: parts, other, other, other, pre-charged with hydrofluorocarbons (hfcs)
- 8418 99 90 99Refrigerators, freezers and other refrigerating or freezing: parts, other, other, other, other
8419 Maskiner, apparater og anlæg, også elektrisk opvarmede (undtagen ovne og andre apparater henhørende under pos. 8514), til behandling af materialer ved processer, der indbefatter temperaturændringer, såsom opvarmning, kogning, ristning, destillation, rektifikation, sterilisation, pasteurisering, dampning, tørring, inddampning, fordampning, kondensering eller afkøling (undtagen maskiner og apparater, af den art der anvendes til husholdningsbrug); gennemstrømnings- eller akkumulerende vandvarmere, ikke-elektriske
- 8419 11 00 00Instantaneous gas water heaters
- 8419 12 00 00Instantaneous or storage water heaters, non-electric: solar water heaters
- 8419 19 00 00Instantaneous or storage water heaters, non-electric: other
- 8419 20 00 00Medical, surgical or laboratory sterilisers
- 8419 33 00 00Lyophilisation apparatus, freeze drying units and spray dryers
- 8419 34 00 00Other, for agricultural products
- 8419 35 00 00Other, for wood, paper pulp, paper or paperboard
- 8419 39 00 00Machinery, plant or laboratory equipment, whether: dryers, other
- 8419 40 00 00Distilling or rectifying plant
- 8419 50 20 00Heat exchange units made of fluoropolymers and with inlet and outlet tube bores with inside diameters measuring 3 cm or less
- 8419 50 80 10For use in civil aircraft
- 8419 50 80 30Aluminium heat exchanger for gas boilers designed for heat transfer: - with a height of 100mm or more, but not more than 150mm, - with a width of 235mm or more, but not more than 300mm, - with a length of 240mm or more, but not more than 300mm, - for a power output of 25kw or more, but not more than 35kw, - with a weight of 8kg or more, but not more than 10kg
- 8419 50 80 90Machinery, plant or laboratory equipment, whether: heat-exchange units, other, other
- 8419 60 00 00Machinery for liquefying air or other gases
- 8419 81 20 10For use in civil aircraft
- 8419 81 20 90Percolators and other appliances for making coffee: other
- 8419 81 80 10For use in civil aircraft
- 8419 81 80 90For making hot drinks or for cooking or heating food: other, other
- 8419 89 10 00Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water
- 8419 89 30 00Vacuum-vapour plant for the deposition of metal
- 8419 89 98 00Other machinery, plant and equipment: other, other
- 8419 90 15 00Of sterilisers of subheading 8419 20 00
- 8419 90 85 10Of heat exchange units, for use in civil aircraft
- 8419 90 85 40Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
- 8419 90 85 90Machinery, plant or laboratory equipment, whether: parts, other, other
8420 Kalandere og andre valsemaskiner, undtagen maskiner til metal eller glas, samt valser dertil
- 8420 10 10 00Of a kind used in the textile industry
- 8420 10 30 00Of a kind used in the paper industry
- 8420 10 81 00Roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuits
- 8420 10 89 00Calendering or other rolling machines: other, other
- 8420 91 10 00Calendering or other rolling machines, other than: parts, cylinders, of cast iron
- 8420 91 80 00Calendering or other rolling machines, other than: parts, cylinders, other
- 8420 99 00 00Calendering or other rolling machines, other than: parts, other
8421 Centrifuger, herunder tørrecentrifuger; maskiner og apparater til filtrering eller rensning af væsker eller gasser
- 8421 11 00 00Centrifuges, including centrifugal dryers: cream separators
- 8421 12 00 00Centrifuges, including centrifugal dryers: clothes dryers
- 8421 19 20 00Centrifuges of a kind used in laboratories
- 8421 19 70 00Centrifuges, including centrifugal dryers: other, other
- 8421 21 00 10For use in civil aircraft
- 8421 21 00 90For filtering or purifying water: other
- 8421 22 00 00For filtering or purifying beverages other than water
- 8421 23 00 10For use in civil aircraft
- 8421 23 00 90Oil or petrol filters for internal combustion engines: other
- 8421 29 20 00Made of fluoropolymers and with filter or purifier membrane thickness not exceeding 140 microns
- 8421 29 80 10For use in civil aircraft
- 8421 29 80 90Filtering or purifying machinery and apparatus for liquids: other, other, other
- 8421 31 00 10For use in civil aircraft
- 8421 31 00 90Intake air filters for internal combustion engines: other
- 8421 32 00 10For use in civil aircraft
- 8421 32 00 90Catalytic converters or particulate filters, whether: other
- 8421 39 15 00With stainless steel housing, and with inlet and outlet tube bores with inside diameters not exceeding 1.3 cm
- 8421 39 25 10For use in civil aircraft
- 8421 39 25 90Machinery and apparatus for filtering or purifying air: other
- 8421 39 35 10For use in civil aircraft
- 8421 39 35 90By a catalytic process: other
- 8421 39 85 10For use in civil aircraft
- 8421 39 85 90Machinery and apparatus for filtering or purifying other: other, other
- 8421 91 00 00Of centrifuges, including centrifugal dryers
- 8421 99 10 00Parts of machinery and apparatus of subheadings 8421 29 20 or 8421 39 15
- 8421 99 90 10Of filtering or purification machinery and apparatus for liquids or gases, for use in certain types of aircrafts
- 8421 99 90 92Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more
- 8421 99 90 99Centrifuges, including centrifugal dryers: parts, other, other, other
8422 Opvaskemaskiner; maskiner og apparater til rensning eller tørring af flasker og andre beholdere; maskiner og apparater til påfyldning, lukning, forsegling eller etikettering af flasker, dåser, æsker, sække og andre beholdere; maskiner og apparater til kapsling af flasker, glas, rør og lignende beholdere; andre emballeringsmaskiner og emballeringsapparater (herunder maskiner til emballering med krympefolie); maskiner og apparater til tilsætning af kulsyre til drikkevarer
- 8422 11 00 00Of the household type
- 8422 19 00 00Dishwashing machines: dishwashing machines, other
- 8422 20 00 00Machinery for cleaning or drying bottles or other containers
- 8422 30 00 00Machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beverages
- 8422 40 00 00Other packing or wrapping machinery (including heat-shrink wrapping machinery)
- 8422 90 10 00Dishwashing machines: parts, of dishwashing machines
- 8422 90 90 00Dishwashing machines: parts, other
8423 Vægte, herunder tælle- og kontrolvægte (undtagen vægte, følsomme for 5 centigram og derunder); vægtlodder af enhver art
- 8423 10 10 00Personal weighing machines, including baby scales: household scales
- 8423 10 90 00Personal weighing machines, including baby scales: other
- 8423 20 10 00Using electronic means for gauging weight
- 8423 20 90 00Scales for continuous weighing of goods on conveyors: other
- 8423 30 10 00Using electronic means for gauging weight
- 8423 30 90 00Constant weight scales and scales for discharging: other
- 8423 81 21 00Check weighers and automatic control machines operating by reference to a pre-determined weight
- 8423 81 23 00Machinery for weighing and labelling pre-packaged goods
- 8423 81 25 00Using electronic means for gauging weight: shop scales
- 8423 81 29 00Using electronic means for gauging weight: other
- 8423 81 80 00Having a maximum weighing capacity not exceeding 30 kg: other
- 8423 82 20 00Using electronic means for gauging weight, excluding machines for weighing motor vehicles
- 8423 82 81 00Check weighers and automatic control machines operating by reference to a pre-determined weight
- 8423 82 89 00Having a maximum weighing capacity exceeding 30: other, other
- 8423 89 20 00Using electronic means for gauging weight
- 8423 89 80 00Weighing machinery: other weighing machinery, other, other
- 8423 90 10 00Parts of weighing machinery of subheadings 8423 20 10, 8423 30 10, 8423 81 21, 8423 81 23, 8423 81 25, 8423 81 29, 8423 82 20 or 8423 89 20
- 8423 90 90 00Weighing machine weights of all kinds: other
8424 Mekaniske apparater (også hånddrevne) til udsprøjtning, forstøvning eller spredning af væsker eller pulvere; ildslukningsapparater, også med ladning; sprøjtepistoler og lignende redskaber; dampstråle- og sandstråleblæsere og lignende maskiner
- 8424 10 00 11High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle
- 8424 10 00 15Not charged fire extinguishers: other
- 8424 10 00 19For use in civil aircraft: other
- 8424 10 00 21High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle
- 8424 10 00 29Not charged fire extinguishers: other
- 8424 10 00 80Fire extinguishers, whether or not charged: other, other
- 8424 20 00 00Spray guns and similar appliances
- 8424 30 01 00Water cleaning appliances, with built-in motor: with heating device
- 8424 30 08 00Water cleaning appliances, with built-in motor: other
- 8424 30 10 00Steam or sandblasting machines and similar jet projecting: other machines, compressed air operated
- 8424 30 90 00Steam or sandblasting machines and similar jet projecting: other machines, other
- 8424 41 00 00Agricultural or horticultural sprayers: portable sprayers
- 8424 49 10 00Sprayers and powder distributors designed to be mounted on or drawn by tractors
- 8424 49 90 00Agricultural or horticultural sprayers: other, other
- 8424 82 10 00Mechanical appliances: other appliances, agricultural or horticultural, watering appliances
- 8424 82 90 00Mechanical appliances: other appliances, agricultural or horticultural, other
- 8424 89 40 00Mechanical appliances for projecting, dispersing, or spraying of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
- 8424 89 70 00Mechanical appliances: other appliances, other, other
- 8424 90 20 00Parts of mechanical appliances of subheading 8424 89 40
- 8424 90 80 20Of fire extinguishers, for use in certain types of aircraft
- 8424 90 80 60High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle
- 8424 90 80 80Mechanical appliances: parts, other, other
8425 Taljer og hejseværker, undtagen hejseværker med spande (»skips«); spil og ankerspil; donkrafte
- 8425 11 00 00Powered by electric motor
- 8425 19 00 00Pulley tackle and hoists other than skip hoists or hoists: other
- 8425 31 00 00Powered by electric motor
- 8425 39 00 00Pulley tackle and hoists other than skip hoists: winches; capstans, other
- 8425 41 00 00Built-in jacking systems of a type used in garages
- 8425 42 00 00Other jacks and hoists, hydraulic
- 8425 49 00 00Jacks; hoists of a kind used for raising vehicles: other
8426 Lossebomme til skibe; svingkraner og andre kraner, herunder kabelkraner; mobile portalkraner, portalløftetrucks og krantrucks
- 8426 11 00 00Overhead travelling cranes on fixed support
- 8426 12 00 00Mobile lifting frames on tyres and straddle carriers
- 8426 19 00 00Overhead travelling cranes, transporter cranes, gantry: other
- 8426 20 00 00Ships' derricks: tower cranes
- 8426 30 00 00Portal or pedestal jib cranes
- 8426 41 00 00Ships' derricks: other machinery, self-propelled, on tyres
- 8426 49 00 11New mobile cranes, meaning cable-controlled or hydraulic-powered cranes, designed for the lifting, lowering and horizontal movement of materials on land, with a lifting capacity of at least 30 tonnes, mounted on self-propelled vehicles, regardless of their propulsion systemmobile cranes
- 8426 49 00 90Ships' derricks: other machinery, self-propelled, other, other
- 8426 91 10 00Hydraulic cranes designed for the loading and unloading of the vehicle
- 8426 91 90 00Designed for mounting on road vehicles: other
- 8426 99 00 00Ships' derricks: other machinery, other
8427 Gaffeltrucks; andre trucks med anordning til løftning eller flytning
- 8427 10 10 10Mobile access equipment designed for the lifting of persons, with a maximum working height of 6 meters or more
- 8427 10 10 90With a lifting height of 1 m or more: other
- 8427 10 90 00Self-propelled trucks powered by an electric motor: other
- 8427 20 11 00Fork-lift and other stacking trucks, for rough terrain
- 8427 20 19 10Mobile access equipment designed for the lifting of persons, with a maximum working height of 6 meters or more
- 8427 20 19 90With a lifting height of 1 m or more: other, other
- 8427 20 90 00Fork-lift trucks: other self-propelled trucks, other
- 8427 90 00 11Fork-lift trucks: other trucks, hand pallet trucks, consigned from Thailand
- 8427 90 00 19Fork-lift trucks: other trucks, hand pallet trucks, other
- 8427 90 00 30Hand pallet trucks with a so-called “weight indication system” consisting of a weighing mechanism not integrated in the chassis, that is to say not integrated in the forks
- 8427 90 00 80Fork-lift trucks: other trucks, other
8428 Andre maskiner og apparater til løftning, lastning, losning eller flytning (fx elevatorer, rulletrapper, transportører og tovbaner)
- 8428 10 20 00Lifts and skip hoists: electrically operated
- 8428 10 80 00Lifts and skip hoists: other
- 8428 20 20 00Pneumatic elevators and conveyors: for bulk materials
- 8428 20 80 00Pneumatic elevators and conveyors: other
- 8428 31 00 00Specially designed for underground use
- 8428 32 00 00Other continuous-action elevators and conveyors, for goods: other, bucket type
- 8428 33 00 00Other continuous-action elevators and conveyors, for goods: other, belt type
- 8428 39 20 00Other continuous-action elevators and conveyors, for goods: other, roller conveyors
- 8428 39 90 00Other continuous-action elevators and conveyors, for goods: other, other
- 8428 40 00 00Escalators and moving walkways
- 8428 60 00 00Teleferics, chairlifts, ski-draglines; traction mechanisms for funiculars
- 8428 70 00 00Other lifting, handling, loading or unloading machinery: industrial robots
- 8428 90 71 00Designed for attachment to agricultural tractors
- 8428 90 79 00Loaders specially designed for use in agriculture: other
- 8428 90 90 20Mobile access equipment designed for the lifting of persons, self-propelled, with a maximum working height of 6 meters or more
- 8428 90 90 80Other lifting, handling, loading or unloading machinery: other machinery, other, other
8429 Bulldozere, angledozere, vejhøvle (graders og levellers), scrapere, gravemaskiner, læssemaskiner, stampemaskiner og vejtromler, selvkørende
- 8429 11 00 00Self-propelled bulldozers, angledozers, graders, levellers: bulldozers and angledozers, track laying
- 8429 19 00 00Self-propelled bulldozers, angledozers, graders, levellers: bulldozers and angledozers, other
- 8429 20 00 00Self-propelled bulldozers, angledozers, graders, levellers: graders and levellers
- 8429 30 00 00Self-propelled bulldozers, angledozers, graders, levellers: scrapers
- 8429 40 10 00Tamping machines and roadrollers: roadrollers, vibratory
- 8429 40 30 00Tamping machines and roadrollers: roadrollers, other
- 8429 40 90 00Tamping machines and roadrollers: tamping machines
- 8429 51 10 00Loaders specially designed for underground use
- 8429 51 91 00Mechanical shovels, excavators and shovel loaders: front-end shovel loaders, other, crawler shovel loaders
- 8429 51 99 00Mechanical shovels, excavators and shovel loaders: front-end shovel loaders, other, other
- 8429 52 10 00Machinery with a 360° revolving superstructure: track-laying excavators
- 8429 52 90 00Machinery with a 360° revolving superstructure: other
- 8429 59 00 00Mechanical shovels, excavators and shovel loaders: other
8430 Andre maskiner og apparater til jordarbejde, minedrift, stenbrydning og lign. (fx maskiner til planering, udgravning, stampning, komprimering eller boring); piloteringsmaskiner (rambukke) og maskiner til optrækning af pæle; sneplove og sneblæsere
- 8430 10 00 00Piledrivers and pile extractors
- 8430 20 00 00Other moving, grading, levelling, scraping, excavating: snowploughs and snowblowers
- 8430 31 00 00Coal or rock cutters and tunnelling machinery: self-propelled
- 8430 39 00 00Coal or rock cutters and tunnelling machinery: other
- 8430 41 00 00Other boring or sinking machinery: self-propelled
- 8430 49 00 00Other boring or sinking machinery: other
- 8430 50 00 00Other moving, grading, levelling, scraping, excavating: other machinery, self-propelled
- 8430 61 00 00Tamping or compacting machinery
- 8430 69 00 00Other machinery, not self-propelled: other
8431 Dele, som udelukkende eller hovedsagelig anvendes til maskiner eller apparater henhørende under pos. 8425-8430
- 8431 10 00 00Of machinery of heading 8425
- 8431 20 00 11Chassis and hydraulics for hand pallet trucks: consigned from Thailand
- 8431 20 00 19Chassis and hydraulics for hand pallet trucks: other
- 8431 20 00 40Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2.54 cm of core length for use in the manufacture of vehicles of heading 8427
- 8431 20 00 50Chassis and hydraulics, with a so-called ‘weight indication system’ consisting of a weighing mechanism not integrated in the chassis, that is to say not integrated in the forks
- 8431 20 00 60Pre-assembled or ready-to-assemble sections of self-propelled mobile access equipment designed for the lifting of persons, excluding individual components when presented separately
- 8431 20 00 70Container spreader for lifting empty 20' and 40' cargo containers: -without an integrated carriage, -suitable for machines with a load capacity of not more than 11 000 kg, -designed to carry one or two containers at a time, -with a top or side mounting, -with an anti-corrosion layer coated, -with a weight of 3 200 kg or more but not more than 4 000 kg for use in the manufacture of self-propelled container handlers
- 8431 20 00 80Of machinery of heading 8427: other
- 8431 31 00 00Of lifts, skip hoists or escalators
- 8431 39 00 10Pre-assembled or ready-to-assemble sections of self-propelled mobile access equipment designed for the lifting of persons, excluding individual components when presented separately
- 8431 39 00 15Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or more
- 8431 39 00 22Certain types of steel shoes, with or without rubber pads: not assembled, other
- 8431 39 00 27Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or more
- 8431 39 00 39Certain types of steel shoes, with or without rubber pads: assembled, other
- 8431 39 00 90Of machinery of heading 8428: other, other
- 8431 41 00 11For new mobile cranes
- 8431 41 00 90Buckets, shovels, grabs and grips: other
- 8431 42 00 00Bulldozer or angledozer blades
- 8431 43 00 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8431 43 00 90Parts for boring or sinking machinery of subheading 8430 41: other
- 8431 49 20 05Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or more
- 8431 49 20 10Certain types of steel shoes, with or without rubber pads: not assembled, other
- 8431 49 20 20Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or more
- 8431 49 20 29Certain types of steel shoes, with or without rubber pads: assembled, other
- 8431 49 20 50Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8431 49 20 90Of cast iron or cast steel: other
- 8431 49 80 05Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or more
- 8431 49 80 10Certain types of steel shoes, with or without rubber pads: not asssembled, other
- 8431 49 80 20Steel track shoes exceeding a length of 380mm, height of 140 mm and weight of 118kg, without grousers of any shape with the dimension 1 mm or more
- 8431 49 80 29Certain types of steel shoes, with or without rubber pads: asssembled, other
- 8431 49 80 50Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8431 49 80 90Of machinery of heading 8426, 8429 or 8430: other, other, other
8432 Landbrugs-, havebrugs- og skovbrugsmaskiner og -apparater til jordens bearbejdning og dyrkning; tromler til plæner eller sportspladser
- 8432 10 00 00Agricultural, horticultural or forestry machinery for soil: ploughs
- 8432 21 00 00Harrows, scarifiers, cultivators, weeders and hoes: disc harrows
- 8432 29 10 00Harrows, scarifiers, cultivators, weeders and hoes: other, scarifiers and cultivators
- 8432 29 30 00Harrows, scarifiers, cultivators, weeders and hoes: other, harrows
- 8432 29 50 00Harrows, scarifiers, cultivators, weeders and hoes: other, rotovators
- 8432 29 90 00Harrows, scarifiers, cultivators, weeders and hoes: other, other
- 8432 31 00 00No-till direct seeders, planters and transplanters
- 8432 39 11 00Central driven precision spacing seeders
- 8432 39 19 00Seeders, planters and transplanters: other, seeders, other
- 8432 39 90 00Seeders, planters and transplanters: other, planters and transplanters
- 8432 41 00 00Manure spreaders and fertiliser distributors: manure spreaders
- 8432 42 00 00Manure spreaders and fertiliser distributors: fertiliser distributors
- 8432 80 00 00Agricultural, horticultural or forestry machinery for soil: other machinery
- 8432 90 00 00Agricultural, horticultural or forestry machinery for soil: parts
8433 Høstmaskiner og tærskeværker, herunder halm- og foderpressere; slåmaskiner (herunder plæneklippere); maskiner til rensning eller sortering af æg, frugt eller andre landbrugsprodukter, undtagen maskiner og apparater henhørende under pos. 8437
- 8433 11 10 10Electric robot mowers, capable of cutting grass (for example, in lawns, parks and sports grounds), without direct human control, whether or not including the secondary equipment necessary to their functioning (a charging station and, in most cases, ancillary materials or equipment necessary for the proper navigation of the robot lawn mower, e.g., a boundary wire or a wireless alternative thereto).
- 8433 11 10 90Powered, with the cutting device rotating in a horizontal: electric, other
- 8433 11 51 00Powered, with the cutting device rotating in a horizontal: other, self-propelled, with a seat
- 8433 11 59 00Powered, with the cutting device rotating in a horizontal: other, self-propelled, other
- 8433 11 90 00Powered, with the cutting device rotating in a horizontal: other, other
- 8433 19 10 00Mowers for lawns, parks or sports grounds: other, with motor, electric
- 8433 19 51 00Mowers for lawns, parks or sports grounds: other, with motor, other, self-propelled, with a seat
- 8433 19 59 00Mowers for lawns, parks or sports grounds: other, with motor, other, self-propelled, other
- 8433 19 70 00Mowers for lawns, parks or sports grounds: other, with motor, other, other
- 8433 19 90 00Mowers for lawns, parks or sports grounds: other, without motor
- 8433 20 10 00Other mowers, including cutter bars for tractor mounting: with motor
- 8433 20 50 00Designed to be carried on or hauled by a tractor
- 8433 20 90 00Other mowers, including cutter bars for tractor mounting: other, other
- 8433 30 00 00Harvesting or threshing machinery, including straw: other haymaking machinery
- 8433 40 00 00Straw or fodder balers, including pick-up balers
- 8433 51 00 00Other harvesting machinery; threshing machinery: combine harvester-threshers
- 8433 52 00 00Other harvesting machinery; threshing machinery: other threshing machinery
- 8433 53 10 00Potato diggers and potato harvesters
- 8433 53 30 00Beet-topping machines and beet harvesters
- 8433 53 90 00Root or tuber harvesting machines: other
- 8433 59 11 00Other harvesting machinery; threshing machinery: other, forage harvesters, self-propelled
- 8433 59 19 00Other harvesting machinery; threshing machinery: other, forage harvesters, other
- 8433 59 85 00Other harvesting machinery; threshing machinery: other, other
- 8433 60 00 00Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce
- 8433 90 00 00Harvesting or threshing machinery, including straw: parts
8434 Malkemaskiner og mejerimaskiner
8435 Pressere, persere og andre maskiner og apparater til brug ved fremstilling af vin, cider, frugtsaft eller lignende drikkevarer
8436 Andre maskiner og apparater til landbrug, havebrug, skovbrug, fjerkræavl eller biavl, herunder spiringsanlæg med mekanisk udstyr eller udstyr til opvarmning; rugemaskiner og kyllingemødre
- 8436 10 00 00Machinery for preparing animal feedingstuffs
- 8436 21 00 00Poultry incubators and brooders
- 8436 29 00 00Poultry-keeping machinery; poultry incubators and brooders: other
- 8436 80 10 00Other agricultural, horticultural, forestry: other machinery, forestry machinery
- 8436 80 90 00Other agricultural, horticultural, forestry: other machinery, other
- 8436 91 00 00Of poultry-keeping machinery or poultry incubators and brooders
- 8436 99 00 10Part containing: - a single-phase ac motor, - an epicyclic gearing, - a cutter blade and whether or not containing: - a capacitor, - a part fitted with a threaded bolt for use in the manufacture of garden shredders
- 8436 99 00 90Other agricultural, horticultural, forestry: parts, other, other
8437 Maskiner og apparater til rensning og sortering af frø, korn eller tørrede bælgfrugter; maskiner og apparater til møllerier og maskiner og apparater til anden behandling af korn og tørrede bælgfrugter (undtagen maskiner og apparater af landbrugstyper)
8438 Maskiner og apparater, ikke tariferet i nogen anden position i dette kapitel, til industriel tilberedning eller fremstilling af fødevarer eller drikkevarer, undtagen maskiner og apparater til udvinding eller tilberedning af animalske eller fede vegetabilske eller mikrobielle olier og fedtstoffer
- 8438 10 10 00Bakery machinery and machinery for the manufacture: bakery machinery
- 8438 10 90 00Machinery for the manufacture of macaroni, spaghetti or similar products
- 8438 20 00 00Machinery for the manufacture of confectionery, cocoa or chocolate
- 8438 30 00 00Machinery for sugar manufacture
- 8438 40 00 00Machinery, not specified or included elsewhere in this: brewery machinery
- 8438 50 00 00Machinery for the preparation of meat or poultry
- 8438 60 00 00Machinery for the preparation of fruits, nuts or vegetables
- 8438 80 10 00For the preparation of tea or coffee
- 8438 80 91 00For the preparation or manufacture of drink
- 8438 80 99 00Machinery, not specified or included elsewhere in this: other machinery, other, other
- 8438 90 00 00Machinery, not specified or included elsewhere in this: parts
8439 Maskiner og apparater til fremstilling af papirmasse eller til fremstilling og efterbehandling af papir og pap
- 8439 10 00 00Machinery for making pulp of fibrous cellulosic material
- 8439 20 00 00Machinery for making paper or paperboard
- 8439 30 00 00Machinery for finishing paper or paperboard
- 8439 91 00 00Of machinery for making pulp of fibrous cellulosic material
- 8439 99 00 10Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3 000 mm or more and an external diameter of 550 mm or more
- 8439 99 00 90Machinery for making pulp of fibrous cellulosic material: parts, other, other
8440 Maskiner og apparater til bogindbinding, herunder symaskiner til hæftning af bøger
- 8440 10 10 00Bookbinding machinery, including book-sewing machines: machinery, folding machines
- 8440 10 20 00Collating machines and gathering machines
- 8440 10 30 00Sewing, wire stitching and stapling machines
- 8440 10 40 00Unsewn (perfect) binding machines
- 8440 10 90 00Bookbinding machinery, including book-sewing machines: machinery, other
- 8440 90 00 00Bookbinding machinery, including book-sewing machines: parts
8441 Andre maskiner og apparater til forarbejdning af papirmasse, papir og pap, herunder papir- og papskæremaskiner af enhver art
- 8441 10 10 00Combined reel slitting and re-reeling machines
- 8441 10 20 00Other slitting and cross-cutting machines
- 8441 10 30 00Other machinery for making up paper pulp, paper: cutting machines, guillotines
- 8441 10 70 00Other machinery for making up paper pulp, paper: cutting machines, other
- 8441 20 00 00Machines for making bags, sacks or envelopes
- 8441 30 00 00Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding
- 8441 40 00 00Machines for moulding articles in paper pulp, paper or paperboard
- 8441 80 00 00Other machinery for making up paper pulp, paper: other machinery
- 8441 90 10 00Other machinery for making up paper pulp, paper: parts, of cutting machines
- 8441 90 90 00Other machinery for making up paper pulp, paper: parts, other
8442 Maskiner, apparater og redskaber (undtagen maskiner henhørende under pos. 8456-8465) til fremstilling og bearbejdning af trykplader, trykcylindre og lign.; trykplader, trykcylindre og lign.; plader, cylindre og litografiske sten, behandlet til grafisk brug (slebet, poleret og lign.)
8443 Trykkemaskiner, som anvender plader, cylindre og lign. henhørende under pos. 8442; andre printere, kopieringsmaskiner og telefaxapparater, også kombineret; dele og tilbehør
- 8443 11 00 00Offset printing machinery, reel fed
- 8443 12 00 00Offset printing machinery, sheet fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state)
- 8443 13 10 00Other offset printing machinery: sheet fed, used
- 8443 13 32 00Not exceeding 53 × 75 cm
- 8443 13 34 00Exceeding 53 × 75 cm but not exceeding 75 × 107 cm
- 8443 13 38 00Exceeding 75 × 107 cm
- 8443 13 90 00Other offset printing machinery: other
- 8443 14 00 00Letterpress printing machinery, reel fed, excluding flexographic printing
- 8443 15 00 00Letterpress printing machinery, other than reel fed, excluding flexographic printing
- 8443 16 00 00Printing machinery used for printing by means of plates: flexographic printing machinery
- 8443 17 00 00Printing machinery used for printing by means of plates: gravure printing machinery
- 8443 19 20 00For printing textile materials
- 8443 19 40 00For use in the production of semiconductors
- 8443 19 70 00Printing machinery used for printing by means of plates: other, other
- 8443 31 00 00Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data-processing machine or to a network
- 8443 32 10 00Other, capable of connecting to an automatic: printers
- 8443 32 80 00Other, capable of connecting to an automatic: other
- 8443 39 00 00Other printers, copying machines and facsimile machines: other
- 8443 91 10 00Of apparatus of subheading 8443 19 40
- 8443 91 91 00Of cast iron or cast steel
- 8443 91 99 00Parts and accessories of printing machinery used: other, other
- 8443 99 10 00Printing machinery used for printing by means of plates: parts and accessories, other, electronic assemblies
- 8443 99 90 00Printing machinery used for printing by means of plates: parts and accessories, other, other
8444 Maskiner til fremstilling (ekstrusion), strækning, teksturering og skæring af kemofibre
8445 Maskiner til bearbejdning af tekstilfibre; spinde- og tvindemaskiner samt andre maskiner til fremstilling af tekstilgarn; spolemaskiner (herunder skudgarnsspolemaskiner) og maskiner til bearbejdning af tekstilgarn med henblik på anvendelse i de under pos. 8446 og 8447 nævnte maskiner
- 8445 11 00 00Machines for preparing textile fibres: carding machines
- 8445 12 00 00Machines for preparing textile fibres: combing machines
- 8445 13 00 00Drawing or roving machines
- 8445 19 00 00Machines for preparing textile fibres: other
- 8445 20 00 00Machines for preparing textile fibres: textile spinning machines
- 8445 30 00 00Textile doubling or twisting machines
- 8445 40 00 00Textile winding (including weft-winding) or reeling machines
- 8445 90 00 00Machines for preparing textile fibres: other
8446 Vævestole
- 8446 10 00 00For weaving fabrics of a width not exceeding 30 cm
- 8446 21 00 00For weaving fabrics of a width exceeding 30 cm, shuttle type: power looms
- 8446 29 00 00For weaving fabrics of a width exceeding 30 cm, shuttle type: other
- 8446 30 00 00For weaving fabrics of a width exceeding 30 cm, shuttleless type
8447 Strikkemaskiner, stitch-bondingmaskiner, maskiner til fremstilling af overspundet garn, tyl, blonder og kniplinger, broderier, possement og net samt maskiner til tufting
- 8447 11 00 00With cylinder diameter not exceeding 165 mm
- 8447 12 00 00With cylinder diameter exceeding 165 mm
- 8447 20 20 00Warp knitting machines (including raschel type); stitch-bonding machines
- 8447 20 80 00Flat knitting machines; stitch-bonding machines: other
- 8447 90 00 00Knitting machines, stitch-bonding machines and machines: other
8448 Hjælpemaskiner og hjælpeapparater til brug i forbindelse med de under pos. 8444-8447 hørende maskiner (fx skaftmaskiner, jacquardmaskiner, kæde- og skudvogtere samt skytteskiftningsmaskiner); dele og tilbehør, som udelukkende eller hovedsagelig anvendes til maskiner henhørende under denne position eller under pos. 8444-8447 (fx spindler og spindelvinger, kartebeslag, kamme, spindedyser, væveskytter, vævelidser (søller), skaftrammer samt nåle til strikkemaskiner)
- 8448 11 00 00Dobbies and jacquards; card-reducing, copying, punching or assembling machines for use therewith
- 8448 19 00 00Auxiliary machinery for machines of heading 8444, 8445: other
- 8448 20 00 00Parts and accessories of machines of heading 8444 or of their auxiliary machinery
- 8448 31 00 00Parts and accessories of machines of heading 8445: card clothing
- 8448 32 00 00Of machines for preparing textile fibres, other than card clothing
- 8448 33 00 00Spindles, spindle flyers, spinning rings and ring travellers
- 8448 39 00 00Parts and accessories of machines of heading 8445: other
- 8448 42 00 00Reeds for looms, healds and heald-frames
- 8448 49 00 00Parts and accessories of weaving machines: other
- 8448 51 10 00Sinkers, needles and other articles used in forming stitches: sinkers
- 8448 51 90 00Sinkers, needles and other articles used in forming stitches: other
- 8448 59 00 00Parts and accessories of machines of heading 8447: other
8449 Maskiner og apparater til fremstilling og efterbehandling af filt og fiberdug i metermål eller i anden form, herunder maskiner og apparater til fremstilling af filthatte; blokke til fremstilling af hatte
8450 Vaskemaskiner, også med tørremaskine
- 8450 11 11 00Each of a dry linen capacity not exceeding 6 kg: front-loading machines
- 8450 11 19 00Each of a dry linen capacity not exceeding 6 kg: top-loading machines
- 8450 11 90 00Each of a dry linen capacity exceeding 6 kg but not exceeding 10 kg
- 8450 12 00 00Other machines, with built-in centrifugal drier
- 8450 19 00 00Machines, each of a dry linen capacity not exceeding 10 kg: other
- 8450 20 00 00Machines, each of a dry linen capacity exceeding 10 kg
- 8450 90 00 00Household or laundry-type washing machines, including: parts
8451 Maskiner og apparater (undtagen maskiner henhørende under pos. 8450) til vask, rensning, vridning, tørring, strygning, presning (herunder fikseringspresser), blegning, farvning, appretering, overfladebehandling, overtrækning eller imprægnering af tekstilgarn, tekstilstof eller forarbejdede tekstilvarer samt maskiner til pålægning af masse på tekstilstof eller andet støttemateriale ved fremstilling af gulvbelægning (fx linoleum); maskiner til oprulning, afrulning, sammenlægning, tilskæring og takning af tekstilstof
- 8451 10 00 00Machinery: dry-cleaning machines
- 8451 21 00 00Each of a dry linen capacity not exceeding 10 kg
- 8451 29 00 00Machinery: drying machines, other
- 8451 30 00 00Ironing machines and presses (including fusing presses)
- 8451 40 00 00Washing, bleaching or dyeing machines
- 8451 50 00 00Machines for reeling, unreeling, folding, cutting or pinking textile fabrics
- 8451 80 10 00Machines used in the manufacture of linoleum or other floor coverings for applying the paste to the base fabric or other support
- 8451 80 30 00Machines for dressing or finishing
- 8451 80 80 00Machinery: other machinery, other
- 8451 90 00 00Machinery: parts
8452 Symaskiner, undtagen symaskiner til hæftning af bøger henhørende under pos. 8440; møbler, borde og overtræk, specielt konstrueret til symaskiner; symaskinenåle
- 8452 10 11 00Sewing machines having a value (not including frames, tables or furniture) of more than 54.00 gbp each
- 8452 10 19 00Sewing machines: other
- 8452 10 90 00Other sewing machines and other sewing machine heads
- 8452 21 00 00Sewing machines, other than book-sewing machines of heading: other sewing machines, automatic units
- 8452 29 00 00Sewing machines, other than book-sewing machines of heading: other sewing machines, other
- 8452 30 00 00Sewing machines, other than book-sewing machines of heading: sewing machine needles
- 8452 90 00 00Furniture, bases and covers for sewing machines and parts thereof; other parts of sewing machines
8453 Maskiner og apparater (undtagen symaskiner) til beredning, garvning og forarbejdning af huder, skind eller læder og til fremstilling eller reparation af fodtøj eller andre varer af huder, skind eller læder
8454 Konvertorer, støbeskeer, kokiller og støbemaskiner, af den art der anvendes i den metallurgiske industri og i metalstøberier
- 8454 10 00 00Converters, ladles, ingot moulds and casting machines: converters
- 8454 20 00 00Ingot moulds and ladles
- 8454 30 10 00For casting under pressure
- 8454 30 90 00Converters, ladles, ingot moulds and casting machines: casting machines, other
- 8454 90 00 00Converters, ladles, ingot moulds and casting machines: parts
8455 Valsemaskiner til valsning af metaller samt valser dertil
- 8455 10 00 00Metal-rolling mills and rolls therefor: tube mills
- 8455 21 00 00Hot or combination hot and cold
- 8455 22 00 00Metal-rolling mills and rolls therefor: other rolling mills, cold
- 8455 30 10 00Rolls for rolling mills: of cast iron
- 8455 30 31 00Hot-rolling work-rolls; hot-rolling and cold-rolling back-up rolls
- 8455 30 39 00Of open-die forged steel: cold-rolling work-rolls
- 8455 30 90 00Rolls for rolling mills: other
- 8455 90 00 00Metal-rolling mills and rolls therefor: other parts
8456 Værktøjsmaskiner til bearbejdning af ethvert materiale, som fjerner materiale ved hjælp af laserstråler eller andre lys- og fotonstråler, ultralyd, elektroerosion, elektrokemiske processer, elektronstråler, ionstråler eller plasmabue; vandskæremaskiner
- 8456 11 10 00Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines
- 8456 11 90 00Operated by laser or other light or photon beam processes: operated by laser, other
- 8456 12 10 00Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines
- 8456 12 90 00Operated by other light or photon beam processes: other
- 8456 20 00 00Operated by ultrasonic processes
- 8456 30 11 00Operated by electrodischarge processes: numerically controlled, wire-cut
- 8456 30 19 00Operated by electrodischarge processes: numerically controlled, other
- 8456 30 90 00Operated by electrodischarge processes: other
- 8456 40 00 00Operated by plasma arc processes
- 8456 50 00 00Machine tools for working any material by removal: water-jet cutting machines
- 8456 90 00 00Machine tools for working any material by removal: other
8457 Maskincentre, enkeltstationsmaskiner med flere bearbejdningsenheder, transfermaskiner (flerstationsmaskiner)
- 8457 10 10 00Machining centres, unit construction machines: machining centres, horizontal
- 8457 10 90 00Machining centres, unit construction machines: machining centres, other
- 8457 20 00 00Unit construction machines (single station)
- 8457 30 10 00Machining centres, unit construction machines: multi-station transfer machines, numerically controlled
- 8457 30 90 00Machining centres, unit construction machines: multi-station transfer machines, other
8458 Drejebænke (herunder drejecentre), til fjernelse af metal
- 8458 11 20 00Lathes (including turning centres) for removing metal: horizontal lathes, numerically controlled, turning centres
- 8458 11 41 00Lathes (including turning centres) for removing metal: horizontal lathes, numerically controlled, automatic lathes, single spindle
- 8458 11 49 00Lathes (including turning centres) for removing metal: horizontal lathes, numerically controlled, automatic lathes, multi-spindle
- 8458 11 80 00Lathes (including turning centres) for removing metal: horizontal lathes, numerically controlled, other
- 8458 19 00 00Lathes (including turning centres) for removing metal: horizontal lathes, other
- 8458 91 20 00Lathes (including turning centres) for removing metal: other lathes, numerically controlled, turning centres
- 8458 91 80 00Lathes (including turning centres) for removing metal: other lathes, numerically controlled, other
- 8458 99 00 00Lathes (including turning centres) for removing metal: other lathes, other
8459 Værktøjsmaskiner (herunder kombinerede bore-, fræse- og gevindskæremaskiner) til boring, udboring, fræsning og gevindskæring i metal, undtagen drejebænke (herunder drejecentre) henhørende under pos. 8458
- 8459 10 00 00Way-type unit head machines
- 8459 21 00 00Machine tools: other drilling machines, numerically controlled
- 8459 29 00 00Machine tools: other drilling machines, other
- 8459 31 00 00Machine tools: other boring-milling machines, numerically controlled
- 8459 39 00 00Machine tools: other boring-milling machines, other
- 8459 41 00 00Machine tools: other boring machines, numerically controlled
- 8459 49 00 00Machine tools: other boring machines, other
- 8459 51 00 00Machine tools: milling machines, knee-type, numerically controlled
- 8459 59 00 00Machine tools: milling machines, knee-type, other
- 8459 61 10 00Machine tools: other milling machines, numerically controlled, tool milling machines
- 8459 61 90 00Machine tools: other milling machines, numerically controlled, other
- 8459 69 10 00Machine tools: other milling machines, other, tool milling machines
- 8459 69 90 00Machine tools: other milling machines, other, other
- 8459 70 00 00Other threading or tapping machines
8460 Slibemaskiner, hvæssemaskiner, honemaskiner, lappemaskiner, poleremaskiner og lignende maskiner til overfladebehandling af metal eller cermets ved hjælp af slibesten, slibeskiver eller slibe- eller poleremidler, undtagen tandhjulsfremstillingsmaskiner henhørende under pos. 8461
- 8460 12 00 00Machine tools for deburring, sharpening, grinding, honing: flat-surface grinding machines, numerically controlled
- 8460 19 00 00Machine tools for deburring, sharpening, grinding, honing: flat-surface grinding machines, other
- 8460 22 00 00Centreless grinding machines, numerically controlled
- 8460 23 00 00Other cylindrical grinding machines, numerically controlled
- 8460 24 00 00Machine tools for deburring, sharpening, grinding, honing: other grinding machines, other, numerically controlled
- 8460 29 10 00Machine tools for deburring, sharpening, grinding, honing: other grinding machines, other, for cylindrical surfaces
- 8460 29 90 00Machine tools for deburring, sharpening, grinding, honing: other grinding machines, other, other
- 8460 31 00 00Sharpening (tool or cutter grinding) machines: numerically controlled
- 8460 39 00 00Sharpening (tool or cutter grinding) machines: other
- 8460 40 10 00Honing or lapping machines: numerically controlled
- 8460 40 90 00Honing or lapping machines: other
- 8460 90 00 00Machine tools for deburring, sharpening, grinding, honing: other
8461 Høvlemaskiner, shapingmaskiner, notstikkemaskiner, rømmemaskiner, maskiner til fremstilling og færdigbearbejdning af tandhjul, maskinsave, afskæremaskiner og andre spåntagende værktøjsmaskiner til bearbejdning af metal eller cermets, ikke andetsteds tariferet
- 8461 20 00 00Shaping or slotting machines
- 8461 30 10 00Machine tools for planing, shaping, slotting, broaching: broaching machines, numerically controlled
- 8461 30 90 00Machine tools for planing, shaping, slotting, broaching: broaching machines, other
- 8461 40 11 00For cutting cylindrical gears: numerically controlled
- 8461 40 19 00For cutting cylindrical gears: other
- 8461 40 31 00For cutting other gears: numerically controlled
- 8461 40 39 00For cutting other gears: other
- 8461 40 71 00Fitted with a micrometric adjusting system, in which: numerically controlled
- 8461 40 79 00Fitted with a micrometric adjusting system, in which: other
- 8461 40 90 00Gear-cutting, gear-grinding or gear-finishing machines: gear-finishing machines, other
- 8461 50 11 00Sawing or cutting-off machines: sawing machines, circular saws
- 8461 50 19 00Sawing or cutting-off machines: sawing machines, other
- 8461 50 90 00Sawing or cutting-off machines: cutting-off machines
- 8461 90 00 00Machine tools for planing, shaping, slotting, broaching: other
8462 Værktøjsmaskiner (herunder pressere) til frismedning, hamring og sænksmedning af metal (undtagen valsemaskiner); værktøjsmaskiner (herunder pressere, skærelinjer og afkortningslinjer) til bearbejdning af metal ved bøjning, bukning, kantbukning, retning, klipning, lokning, stansning eller udhugning (undtagen trækkebænke); pressere, undtagen de forannævnte, til bearbejdning af metal eller sintrede metalcarbider
- 8462 11 10 00Closed die forging machines: numerically controlled
- 8462 11 90 00Closed die forging machines: other
- 8462 19 10 00Hot forming machines for forging, die forging: other, numerically controlled
- 8462 19 90 00Hot forming machines for forging, die forging: other, other
- 8462 22 10 00Bending, folding, straightening or flattening machines: profile forming machines, numerically controlled
- 8462 22 90 00Bending, folding, straightening or flattening machines: profile forming machines, other
- 8462 23 00 00Numerically controlled press brakes
- 8462 24 00 00Numerically controlled panel benders
- 8462 25 00 00Numerically controlled roll forming machines
- 8462 26 00 00Other numerically controlled bending, folding, straightening or flattening machines
- 8462 29 00 00Bending, folding, straightening or flattening machines: other
- 8462 32 10 00Slitting lines and cut-to-length lines: numerically controlled
- 8462 32 90 00Slitting lines and cut-to-length lines: other
- 8462 33 00 00Numerically controlled shearing machines
- 8462 39 00 00Slitting lines, cut-to-length lines and other shearing: other
- 8462 42 00 00Punching, notching or nibbling machines: numerically controlled
- 8462 49 00 00Punching, notching or nibbling machines: other
- 8462 51 00 00Machines for working tube, pipe, hollow section and bar: numerically controlled
- 8462 59 00 00Machines for working tube, pipe, hollow section and bar: other
- 8462 61 10 00Cold metal working presses: hydraulic presses, numerically controlled
- 8462 61 90 00Cold metal working presses: hydraulic presses, other
- 8462 62 10 00Cold metal working presses: mechanical presses, numerically controlled
- 8462 62 90 00Cold metal working presses: mechanical presses, other
- 8462 63 10 00Cold metal working presses: servo-presses, numerically controlled
- 8462 63 90 00Cold metal working presses: servo-presses, other
- 8462 69 10 00Cold metal working presses: other, numerically controlled
- 8462 69 90 00Cold metal working presses: other, other
- 8462 90 10 00Machine tools: other, numerically controlled
- 8462 90 90 00Machine tools: other, other
8463 Andre ikke-spåntagende værktøjsmaskiner til bearbejdning af metal eller cermets
- 8463 10 10 00Drawbenches for bars, tubes, profiles, wire or the like: drawbenches for wire
- 8463 10 90 00Drawbenches for bars, tubes, profiles, wire or the like: other
- 8463 20 00 00Other machine tools for working metal or cermets, without: thread-rolling machines
- 8463 30 00 00Machines for working wire
- 8463 90 00 00Other machine tools for working metal or cermets, without: other
8464 Værktøjsmaskiner til bearbejdning af sten, keramisk materiale, beton, asbestcement og lignende mineralske materialer eller til bearbejdning af glas i kold tilstand
- 8464 10 00 00Machine tools for working stone, ceramics, concrete: sawing machines
- 8464 20 11 00Grinding or polishing machines: for working glass, optical glass
- 8464 20 19 00Grinding or polishing machines: for working glass, other
- 8464 20 80 00Grinding or polishing machines: other
- 8464 90 00 00Machine tools for working stone, ceramics, concrete: other
8465 Værktøjsmaskiner (herunder sømme-, hæfte-, klæbe- og andre samlemaskiner) til bearbejdning af træ, kork, ben, hårdgummi, hård plast og lignende hårde materialer
- 8465 10 10 00With manual transfer of workpiece between each operation
- 8465 10 90 00With automatic transfer of workpiece between each operation
- 8465 20 00 00Machine tools: machining centres
- 8465 91 10 00Machine tools: other, sawing machines, bandsaws
- 8465 91 20 00Machine tools: other, sawing machines, circular saws
- 8465 91 90 00Machine tools: other, sawing machines, other
- 8465 92 00 00Planing, milling or moulding (by cutting) machines
- 8465 93 00 00Grinding, sanding or polishing machines
- 8465 94 00 00Bending or assembling machines
- 8465 95 00 00Drilling or morticing machines
- 8465 96 00 00Splitting, slicing or paring machines
- 8465 99 00 00Machine tools: other, other
8466 Dele og tilbehør, som udelukkende eller hovedsagelig anvendes til maskiner henhørende under pos. 8456-8465, herunder materiale- og værktøjsholdere, selvåbnende gevindskærehoveder, delehoveder og andet specialtilbehør til maskiner; værktøjsholdere til håndværktøj af enhver art
- 8466 10 20 00Arbors, collets and sleeves
- 8466 10 31 00Tool holders and self-opening dieheads: tool holders, other, for lathes
- 8466 10 38 00Tool holders and self-opening dieheads: tool holders, other, other
- 8466 10 80 00Tool holders and self-opening dieheads: self-opening dieheads
- 8466 20 20 00Jigs and fixtures for specific applications; sets of standard jig and fixture components
- 8466 20 91 00Parts and accessories suitable for use solely: work holders, other, for lathes
- 8466 20 98 00Parts and accessories suitable for use solely: work holders, other, other
- 8466 30 00 00Dividing heads and other special attachments for machines
- 8466 91 20 00Of cast iron or cast steel
- 8466 91 95 00For machines of heading 8464: other
- 8466 92 20 00Of cast iron or cast steel
- 8466 92 80 00For machines of heading 8465: other
- 8466 93 40 00Parts and accessories of machines of subheadings 8456 11 10, 8456 12 10, 8456 20, 8456 30, 8457 10, 8458 91, 8459 21 00, 8459 61 or 8461 50 of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines
- 8466 93 50 00For machines of subheading 8456 50 00
- 8466 93 60 00For machines of headings 8456 to 8461: other, other
- 8466 94 00 00For machines of heading 8462 or 8463
8467 Håndværktøj, pneumatisk, hydraulisk eller med indbygget elektrisk eller ikke-elektrisk motor
- 8467 11 10 00Rotary type (including combined rotary-percussion): metalworking
- 8467 11 90 00Rotary type (including combined rotary-percussion): other
- 8467 19 00 00Tools for working in the hand, pneumatic, hydraulic or with: pneumatic, other
- 8467 21 10 00Capable of operation without an external source of power
- 8467 21 91 00Drills of all kinds: other, electropneumatic
- 8467 21 99 00Drills of all kinds: other, other
- 8467 22 10 00With self-contained electric motor: saws, chainsaws
- 8467 22 30 00With self-contained electric motor: saws, circular saws
- 8467 22 90 00With self-contained electric motor: saws, other
- 8467 29 20 00Capable of operation without an external source of power
- 8467 29 51 00With self-contained electric motor: other, other, grinders and sanders, angle grinders
- 8467 29 53 00With self-contained electric motor: other, other, grinders and sanders, belt sanders
- 8467 29 59 00With self-contained electric motor: other, other, grinders and sanders, other
- 8467 29 70 00With self-contained electric motor: other, other, planers
- 8467 29 80 00Hedge trimmers and lawn edge cutters
- 8467 29 85 00With self-contained electric motor: other, other, other
- 8467 81 00 00Tools for working in the hand, pneumatic, hydraulic or with: other tools, chainsaws
- 8467 89 00 00Tools for working in the hand, pneumatic, hydraulic or with: other tools, other
- 8467 91 00 00Tools for working in the hand, pneumatic, hydraulic or with: parts, of chainsaws
- 8467 92 00 00Tools for working in the hand, pneumatic, hydraulic or with: parts, of pneumatic tools
- 8467 99 00 10Pole hedge trimmer cutting elements: -in the form of hedge trimmer attachment, -with a knife length of 60 cm and teeth opening of 30 mm, -with angle adjustment of the blade, -with integrated single stage gearbox, -with a magnesium cast body, for use in the manufacture of garden machinery and power tools
- 8467 99 00 90Tools for working in the hand, pneumatic, hydraulic or with: parts, other, other
8468 Maskiner og apparater til lodning og svejsning, også anvendelige til skæring, undtagen maskiner og apparater henhørende under pos. 8515; gasdrevne flammehærdere
8470 Regnemaskiner og maskiner i lommeformat til optagelse, gengivelse og visning af data, med indbyggede regnefunktioner; bogholderimaskiner, frankeringsmaskiner, billetmaskiner og lignende maskiner med indbygget regnemekanisme; kasseapparater
- 8470 10 00 00Electronic calculators capable of operation without an external source of electric power and pocket-size data-recording, reproducing and displaying machines with calculating functions
- 8470 21 00 00Incorporating a printing device
- 8470 29 00 00Other electronic calculating machines: other
- 8470 30 00 00Calculating machines and pocket-size data-recording: other calculating machines
- 8470 50 00 00Calculating machines and pocket-size data-recording: cash registers
- 8470 90 00 00Calculating machines and pocket-size data-recording: other
8471 Automatiske databehandlingsmaskiner og enheder dertil; magnetiske og optiske læsere, maskiner til overførsel af data til datamedier i kodet form samt maskiner til bearbejdning af sådanne data, ikke andetsteds tariferet
- 8471 30 00 00Portable automatic data-processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a display
- 8471 41 00 00Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined
- 8471 49 00 00Other, presented in the form of systems
- 8471 50 00 00Processing units other than those of subheading 8471 41 or 8471 49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units
- 8471 60 60 00Input or output units, whether or not containing storage: keyboards
- 8471 60 70 00Input or output units, whether or not containing storage: other
- 8471 70 20 00Automatic data-processing machines and units thereof: storage units, central storage units
- 8471 70 30 00Automatic data-processing machines and units thereof: storage units, other, disk storage units, optical, including magneto-optical
- 8471 70 50 00Automatic data-processing machines and units thereof: storage units, other, disk storage units, other, hard disk drives
- 8471 70 70 00Automatic data-processing machines and units thereof: storage units, other, disk storage units, other, other
- 8471 70 80 00Magnetic tape storage units
- 8471 70 98 00Automatic data-processing machines and units thereof: storage units, other, other
- 8471 80 00 00Other units of automatic data-processing machines
- 8471 90 00 00Automatic data-processing machines and units thereof: other
8472 Andre maskiner og apparater til kontorbrug (fx duplikatorer af hektograftypen og stencilduplikatorer, adresseringsmaskiner, automatiske seddelautomater, møntsorterings-, mønttælle- og møntpakkemaskiner, blyantspidsemaskiner, perforeringsmaskiner og hæftemaskiner)
- 8472 10 00 00Other office machines: duplicating machines
- 8472 30 00 00Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps
- 8472 90 10 00Coin-sorting, coin-counting or coin-wrapping machines
- 8472 90 80 00Other office machines: other, other
8473 Dele og tilbehør (undtagen beskyttelsesovertræk, transportkasser og lign.), som udelukkende eller hovedsagelig anvendes til maskiner og apparater henhørende under pos. 8470-8472
- 8473 21 10 00Of the electronic calculating machines of subheading 8470: electronic assemblies
- 8473 21 90 00Of the electronic calculating machines of subheading 8470: other
- 8473 29 10 00Parts and accessories of the machines of heading 8470: other, electronic assemblies
- 8473 29 90 00Parts and accessories of the machines of heading 8470: other, other
- 8473 30 20 00Parts and accessories of the machines of heading 8471: electronic assemblies
- 8473 30 80 00Parts and accessories of the machines of heading 8471: other
- 8473 40 10 00Parts and accessories of the machines of heading 8472: electronic assemblies
- 8473 40 80 00Parts and accessories of the machines of heading 8472: other
- 8473 50 20 00Parts and accessories equally suitable for use with: electronic assemblies
- 8473 50 80 00Parts and accessories equally suitable for use with: other
8474 Maskiner og apparater til sortering, harpning, vaskning, knusning, formaling, blanding og æltning af jord, sten, malm og andre faste mineralske stoffer, også i pulver- og pastaform; maskiner og apparater til agglomerering og formning af faste brændselsstoffer, keramiske masser, uhærdet cement, gips og andre mineralske produkter i pulver- eller pastaform; maskiner til fremstilling af støbeforme af sand
- 8474 10 00 00Sorting, screening, separating or washing machines
- 8474 20 00 00Crushing or grinding machines
- 8474 31 00 00Concrete or mortar mixers
- 8474 32 00 00Machines for mixing mineral substances with bitumen
- 8474 39 00 00Mixing or kneading machines: other
- 8474 80 10 00Machinery for agglomerating, shaping or moulding ceramic paste
- 8474 80 90 00Machinery for sorting, screening, separating, washing: other machinery, other
- 8474 90 10 00Of cast iron or cast steel
- 8474 90 90 00Machinery for sorting, screening, separating, washing: parts, other
8475 Maskiner til samling af elektriske lamper, elektronrør og blitzlamper, indkapslet i glas; maskiner og apparater til fremstilling og bearbejdning af glas og glasvarer i varm tilstand
- 8475 10 00 00Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes
- 8475 21 00 00Machines for making optical fibres and preforms thereof
- 8475 29 00 00Machines for manufacturing or hot working glass or glassware: other
- 8475 90 10 00Parts of machines of subheading 8475 21 00
- 8475 90 90 00Machines for assembling electric or electronic lamps, tubes: parts, other
8476 Salgsautomater (fx frimærke-, cigaret-, fødevare- og drikkevareautomater), herunder vekselautomater
- 8476 21 00 00Incorporating heating or refrigerating devices
- 8476 29 00 00Automatic goods-vending machines: automatic beverage-vending machines, other
- 8476 81 00 00Incorporating heating or refrigerating devices
- 8476 89 10 00Automatic goods-vending machines: other machines, other, money-changing machines
- 8476 89 90 00Automatic goods-vending machines: other machines, other, other
- 8476 90 10 00Parts of money-changing machines
- 8476 90 90 00Automatic goods-vending machines: parts, other
8477 Maskiner og apparater til bearbejdning af gummi og plast eller til fremstilling af varer af disse materialer, ikke andetsteds tariferet i dette kapitel
- 8477 10 00 00Machinery for working rubber or plastics: injection-moulding machines
- 8477 20 00 00Machinery for working rubber or plastics: extruders
- 8477 30 00 00Machinery for working rubber or plastics: blow-moulding machines
- 8477 40 00 00Vacuum-moulding machines and other thermoforming machines
- 8477 51 00 00For moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes
- 8477 59 10 00Other machinery for moulding or otherwise forming: other, presses
- 8477 59 80 00Other machinery for moulding or otherwise forming: other, other
- 8477 80 11 00Machines for processing reactive resins
- 8477 80 19 00Machines for the manufacture of foam products: other
- 8477 80 91 00Machinery for working rubber or plastics: other machinery, other, size reduction equipment
- 8477 80 93 00Mixers, kneaders and agitators
- 8477 80 95 00Cutting, splitting and peeling machines
- 8477 80 99 10Machines for casting or for surface modification of plastic membranes of heading 3921
- 8477 80 99 90Machinery for working rubber or plastics: other machinery, other, other, other
- 8477 90 10 00Of cast iron or cast steel
- 8477 90 80 00Machinery for working rubber or plastics: parts, other
8478 Maskiner og apparater til forarbejdning af tobak, ikke andetsteds tariferet i dette kapitel
8479 Maskiner, apparater og mekaniske redskaber med selvstændig funktion, ikke andetsteds tariferet i dette kapitel
- 8479 10 00 00Machinery for public works, building or the like
- 8479 20 00 00Machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils
- 8479 30 10 00Presses for the manufacture of particle board or fibre: presses
- 8479 30 90 00Presses for the manufacture of particle board or fibre: other
- 8479 40 00 00Rope- or cable-making machines
- 8479 50 00 00Industrial robots, not elsewhere specified or included
- 8479 60 00 00Machines and mechanical appliances having individual: evaporative air coolers
- 8479 71 00 00Of a kind used in airports
- 8479 79 00 00Machines and mechanical appliances having individual: passenger boarding bridges, other
- 8479 81 00 00For treating metal, including electric wire coil-winders
- 8479 82 00 00Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines
- 8479 83 00 00Other machines and mechanical appliances: cold isostatic presses
- 8479 89 30 00Mobile hydraulic-powered mine roof supports
- 8479 89 60 00Other machines and mechanical appliances: other, central greasing systems
- 8479 89 70 00Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies
- 8479 89 97 10The following goods, for use in civil aircraft :hydropneumatic batteries; mechanical actuators for thrust reversers; toilet units specially designed; air humidifiers and dehumidifiers; servo-mechanisms, non-electric; non-electric starter motors; pneumatic starters for turbo-jets, turbopropellers and other gas turbines; windscreen wipers, non-electric; propeller regulators, non-electric
- 8479 89 97 28Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with: -electronic brake assistants, -hydraulic unit driven by brushless electric motor, -brake fluid reservoir, for use in the manufacture of hybrid passenger cars
- 8479 89 97 33Pre-assembled process module unit of an ethane cracker unit, containing: -various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums, -a chilling train containing heat exchangers and a drum which condenses c2 in a gas stream, -a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit), -associated equipment of a c3 splitter distillation column, containing heat exchanger, pumps and drums, and -a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers
- 8479 89 97 38Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: -a length of 110 mm or more but not more than 140 mm, -a width of 90 mm or more but not more than 130 mm, -a height of 80 mm or more but not more than 110 mm for use in the manufacture of engines of motor vehicles
- 8479 89 97 43Pre-assembled process module unit of an ethane cracker unit, containing: -a system for filtering and cooling of dried cracked gas, -a deethanizer distillation column and associated equipment for c2-/c3+ separation, -an acetylene hydrogenation system to remove acetylene within a c2 stream, -a fuel gas drum that stores fuel gas for cracker furnaces, and -a system to regenerate dryers in a cracker installation
- 8479 89 97 60Bioreactor for biopharmaceutical cell culture - having interior surfaces of austenitic stainless steel, and - with a process capacity up to 15 000 litres, - whether or not combined with a “clean-in-process” system and/or a dedicated paired media hold vessel
- 8479 89 97 90Other machines and mechanical appliances: other, other, other
- 8479 90 15 00Parts of machines of subheading 8479 89 70
- 8479 90 20 10For use in civil aircraft
- 8479 90 20 90Of cast iron or cast steel: other
- 8479 90 70 10For use in civil aircraft
- 8479 90 70 30Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
- 8479 90 70 40Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft: -of a circular shape, -made of steel alloy with sintering process, -with not more than 8 oil chambers, -with a rockwell hardness of 55 or more, -with a density of 6.5 g/cm³, or more, but not more than 6.7 g/cm³
- 8479 90 70 60High-pressure seamless cylinders for compressed or liquefied gas, of steel, of all diameters and volume capacities, whether or not threaded, regardless of internal coating or plating, regardless of external finishing and shape, whether or not with a gas bladder inserted, regardless of the cylinders’ fitting with a valve, neck ring, foot ring or piping, whether or not fastened together to form a bundle
- 8479 90 70 85Injectors with solenoid valve for optimised atomisation in the engine combustion chamber
- 8479 90 70 99Machines and mechanical appliances having individual: parts, other, other, other, other
8480 Formkasser til metalstøbning; bundplader til støbeforme; støbeformsmodeller; støbeforme til metaller (bortset fra kokiller), metalcarbider, glas, mineralske materialer, gummi og plast
- 8480 10 00 00Moulding boxes for metal foundry
- 8480 20 00 00Moulding boxes for metal foundry: mould bases
- 8480 30 10 00Moulding boxes for metal foundry: moulding patterns, of wood
- 8480 30 90 00Moulding boxes for metal foundry: moulding patterns, other
- 8480 41 00 00Injection or compression types
- 8480 49 00 00Moulds for metal or metal carbides: other
- 8480 50 00 00Moulding boxes for metal foundry: moulds for glass
- 8480 60 00 00Moulds for mineral materials
- 8480 71 00 00Injection or compression types
- 8480 79 00 00Moulds for rubber or plastics: other
8481 Haner, ventiler og lignende tilbehør til rørledninger, kedler, tanke, kar og lignende beholdere, herunder trykreguleringsventiler og termostatregulerede ventiler
- 8481 10 05 10For use in certain types of aircraft
- 8481 10 05 90Combined with filters or lubricators: other
- 8481 10 19 10For use in certain types of aircraft
- 8481 10 19 90Of cast iron or of steel: other
- 8481 10 99 10For use in certain types of aircraft
- 8481 10 99 40Pressure reducing valves in a brass case with: -a length of not more than 30 mm (± 1 mm), -a width of not more than 18 mm (± 1 mm), of a kind used for incorporation in fuel delivery modules of motor vehicles
- 8481 10 99 90Taps, cocks, valves and similar appliances for pipes: pressure-reducing valves, other, other, other
- 8481 20 10 20For use in certain types of aircraft
- 8481 20 10 90Valves for the control of oleohydraulic power transmission: other
- 8481 20 90 20For use in certain types of aircraft
- 8481 20 90 90Valves for the control of pneumatic power transmission: other
- 8481 30 91 20For use in certain types of aircraft
- 8481 30 91 30Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 mpa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1.2 mm or more, but not more than 1.6 mm, -made of steel
- 8481 30 91 91Steel check (non-return) valves with: - an opening pressure of not more than 800 kpa - an external diameter not more than 37 mm
- 8481 30 91 99Of cast iron or of steel: other, other
- 8481 30 99 20For use in certain types of aircraft
- 8481 30 99 50Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 mpa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1.2 mm or more, but not more than 1.6 mm, -made of steel
- 8481 30 99 90Taps, cocks, valves and similar appliances for pipes: check (non-return) valves, other, other
- 8481 40 10 50For use in certain types of aircraft
- 8481 40 10 90Of cast iron or of steel: other
- 8481 40 90 10For use in certain types of aircraft
- 8481 40 90 90Safety or relief valves: other, other
- 8481 80 11 10For use in certain types of aircraft
- 8481 80 11 90Taps, cocks and valves for sinks, washbasins, bidets, water: mixing valves, other
- 8481 80 19 10For use in certain types of aircraft
- 8481 80 19 90Taps, cocks and valves for sinks, washbasins, bidets, water: other, other
- 8481 80 31 00Central heating radiator valves: thermostatic valves
- 8481 80 39 00Central heating radiator valves: other
- 8481 80 40 10For use in certain types of aircraft
- 8481 80 40 90Valves for pneumatic tyres and inner tubes: other
- 8481 80 51 00Taps, cocks, valves and similar appliances for pipes: other appliances, other, process control valves, temperature regulators
- 8481 80 59 20Pressure regulating valve for incorporation into compressors of motor vehicle air condition units
- 8481 80 59 30Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0.05 mm, but not more than 0.5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 mpa operating pressure
- 8481 80 59 40Flow-control valve - made of steel, - with an outlet hole with a diameter of at least 0.05mm or more, but not more than 0.5 mm, - with an inlet hole with a diameter of at least 0.1 mm, but not more than 1.3 mm, - with chromium nitride coating, - with a surface roughness of rp 0.4
- 8481 80 59 50Electromagnetic valve for quantity control with - a plunger, - a solenoid with a of coil resistance of at least 1.85 ohm, but not more than 8.2 ohm
- 8481 80 59 60Electromagnetic valve for quantity control - with a solenoid with a coil resistance of at least 0.19 ohm, but not more than 0.66 ohm, and with an inductance of not more than 1 mh
- 8481 80 59 70Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0.05 mm, but not more than 0.5 mm, -with an inlet hole with a diameter of at least 0.1 mm, but not more than 1.3 mm
- 8481 80 59 80Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: -with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector, -with an operating pressure of not more than 5.5 bar, -with an operating voltage of 9 vdc or more but not more than 16 vdc, -with a valve's base width of 22 mm or more but not more than 27 mm, -with a valve's length of 55 mm or more but not more than 110 mm, for use in the manufacture of motor vehicle engines
- 8481 80 59 90Taps, cocks, valves and similar appliances for pipes: other appliances, other, process control valves, other, other
- 8481 80 61 00Taps, cocks, valves and similar appliances for pipes: other appliances, other, other, gate valves, of cast iron
- 8481 80 63 50For use in certain types of aircraft
- 8481 80 63 90Taps, cocks, valves and similar appliances for pipes: other appliances, other, other, gate valves, of steel, other
- 8481 80 69 50For use in certain types of aircraft
- 8481 80 69 60Four-way reversing valve for refrigerants, consisting of: - a solenoid pilot valve - a brass valve body including valve slider and copper connections with a working pressure up to 4.5 mpa
- 8481 80 69 99Taps, cocks, valves and similar appliances for pipes: other appliances, other, other, gate valves, other, other, other
- 8481 80 71 00Taps, cocks, valves and similar appliances for pipes: other appliances, other, other, globe valves, of cast iron
- 8481 80 73 10For use in certain types of aircraft
- 8481 80 73 20Pressure- and flow-control valve controlled by external electromagnet: - made of steel and/or steel alloy(s), - without integrated circuit, - of not more than 1000 kpa operating pressure, - with a flow quantity of not more than 5 l/min, - without an electromagnet
- 8481 80 73 90Taps, cocks, valves and similar appliances for pipes: other appliances, other, other, globe valves, of steel, other
- 8481 80 79 10For use in certain types of aircraft
- 8481 80 79 40Service valve which suits for r410a or r32 gas while connecting indoor and outdoor units with: -a withstanding pressure of the valve body of 6.3 mpa, -a leakage ratio of less than 1.6 g/a, -an impurity ratio of less than 1.2 mg/pcs, -an airtight pressure of the valve body of 4.2 mpa for use in the manufacture of air conditioners
- 8481 80 79 90Taps, cocks, valves and similar appliances for pipes: other appliances, other, other, globe valves, other, other
- 8481 80 81 30For use in certain types of aircraft
- 8481 80 81 90Ball and plug valves: other
- 8481 80 85 30For use in certain types of aircraft
- 8481 80 85 90Taps, cocks, valves and similar appliances for pipes: other appliances, other, other, butterfly valves, other
- 8481 80 87 30For use in certain types of aircraft
- 8481 80 87 90Taps, cocks, valves and similar appliances for pipes: other appliances, other, other, diaphragm valves, other
- 8481 80 99 40For use in certain types of aircraft
- 8481 80 99 70Pressure- and flow-control valve controlled by external electromagnet: - made of steel and/or steel alloy(s), - without integrated circuit, - of not more than 1000 kpa operating pressure, - with a flow quantity of not more than 5 l/min, - without an electromagnet
- 8481 80 99 80Solenoid valve for combustion engine continuous variable valve timing system to control oil flow as a function of engine speed and load: -in metal cover, -with electrical connector, -with a force of not more than 10 n, -with an operating voltage of 9 vdc or more but not more than 16 vdc, -with a length of 80 mm or more but not more than 110 mm, -with a width of 80 mm or more but not more than 110 mm, -with a height of 20 mm or more but not more than 30 mm, for use in the manufacture of engines of motor vehicles
- 8481 80 99 90Taps, cocks, valves and similar appliances for pipes: other appliances, other, other, other, other
- 8481 90 00 10For use in certain types of aircraft
- 8481 90 00 25Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features: -high-pressure die-cast aluminium en ac-46000, -shot-blasted and machined, -height of 100 mm or more but not exceeding 135 mm, -width of 115 mm or more but not exceeding 150 mm, -weight of 210 g or more but not more than 500 g
- 8481 90 00 40Valve armature: - for the opening and closing of the flow of fuel, - consisting of a shaft and a blade, - with at least 3 but not more than 8 holes on the blade, - made of metal and/or metal alloy(s)
- 8481 90 00 50Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
- 8481 90 00 60Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute
- 8481 90 00 70Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating
- 8481 90 00 80Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0.05 mm, but not more than 0.5 mm, -with an inlet hole with a diameter of at least 0.1 mm, but not more than 1.3 mm
- 8481 90 00 90Taps, cocks, valves and similar appliances for pipes: parts, other
8482 Kugle- og rullelejer
- 8482 10 10 15Ball bearings with: -an internal diameter of 4 mm or more but not more than 9 mm, -an external diameter of not more than 26 mm, -a width of not more than 8 mm, for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm
- 8482 10 10 90With greatest external diameter not exceeding 30 mm: other
- 8482 10 90 00Ball or roller bearings: ball bearings, other
- 8482 20 00 00Tapered roller bearings, including cone and tapered roller assemblies
- 8482 30 00 00Ball or roller bearings: spherical roller bearings
- 8482 40 00 00Needle roller bearings, including cage and needle roller assemblies
- 8482 50 00 20Axial roller bearing made of steel: -the retainer is made of cold-rolled steel with a carbon content of up to 0.25 percent, complying with standard astm a109-98, -the rollers are made of anti-friction steel according to astm 295-94, -with an external diameter of 63 mm or more but not more than 66 mm, -with an internal diameter of 44 mm or more but not more than 46 mm, -with a weight of 23 g or more but not more than 27 g, -with 36 rollers or more but not more than 38 rollers
- 8482 50 00 90Other cylindrical roller bearings, including cage: other
- 8482 80 00 10Connecting components for use in the production of helicopter tail rotor shafts
- 8482 80 00 90Other, including combined ball/roller bearings: other
- 8482 91 10 00Balls, needles and rollers: tapered rollers
- 8482 91 90 10Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, - made of 100cr6 steel or 100crmnsi6-4 steel (iso 3290), - with a deviation of 0.5 mm or less as determined with the fbhmethod for use in wind turbine industry
- 8482 91 90 90Balls, needles and rollers: other, other
- 8482 99 00 30Brass cages with the following characteristics: – continuously or centrifugally cast, – turned, – containing by weight 35% or more, but not more than 38% of zinc, – containing by weight 0.75% or more, but not more than 1.25% of lead, – containing by weight 1.0% or more, but not more than 1.4% of aluminium, and – with a tensile strength of 415 pa or more, of a kind used for the manufacture of ball bearings
- 8482 99 00 60Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: 14 mm or more but not more than 77 mm for the inner ring, 26 mm or more but not more than 101 mm for the outer ring for use in the manufacture of bearings
- 8482 99 00 70Male and female parts of cages, - made of flat-rolled steel, - with a diameter of 14.5 mm or more but not more than 420 mm, - the male part including rivets, - the female part including holes, used for manufacturing of deep grove ball bearings
- 8482 99 00 80Punched cages of various diameters, - made of flat rolled steel, - with tensile strength of 270 mpa or more, for the production of tapered roller bearings
- 8482 99 00 90Ball or roller bearings: parts, other, other
8483 Transmissionsaksler (herunder kamaksler og krumtapaksler) og krumtappe; lejehuse og aksellejer; tandhjulsudvekslinger og friktionsgear; kugle- og rulleskruer; gearkasser og andre regulerbare gear, herunder drejningsmomentomformere; svinghjul og remskiver, herunder taljeblokke; akselkoblinger og andre koblinger, herunder universalkoblinger
- 8483 10 21 10For use in civil aircraft
- 8483 10 21 90Of cast iron or cast steel: other
- 8483 10 25 10For use in civil aircraft
- 8483 10 25 90Of open-die forged steel: other
- 8483 10 29 10For use in civil aircraft
- 8483 10 29 90Cranks and crank shafts: other, other
- 8483 10 50 10For use in civil aircraft
- 8483 10 50 90Transmission shafts: articulated shafts, other
- 8483 10 95 10For use in civil aircraft
- 8483 10 95 30Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 hrc or more, but not more than 45 hrc
- 8483 10 95 40Stepped shaft made of carbon steel with: -rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15.5' but not more than 0° 21.5', -a largest diameter of 16 mm or more, but not more than 18 mm, -a length of 137 mm or more, but not more than 155 mm, -a weight of 0.12 kg or more, but not more than 0.28 kg
- 8483 10 95 50Drum shaft for torque transmission, in steel (to sm45c for shaft standard and sts430 for ring standard) with: -a length of 137.8 mm or more but not more than 138.2 mm, -an outer diameter of 23 mm or more but not more than 48.025 mm, -a weight of 1.0245 kg or more but not more than 1.0445 kg, -a hardness of the shaft of 40 or more on the rockwell c hardness scale (hrc), but not more than 50 hrc, -a ring hardness of 90 or more on the rockwell b hardness scale (hrb), but not more than 120 hrb, -an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm
- 8483 10 95 90Transmission shafts: other, other
- 8483 20 00 00Bearing housings, incorporating ball or roller bearings
- 8483 30 32 10For use in civil aircraft
- 8483 30 32 30Bearing housing of a kind used in turbochargers: - of precision-cast grey cast iron complying with standard din en 1561 or precision-cast ductile cast iron complying with din en 1560, - with oil chambers, - without bearings, - with a diameter of 50 mm or more, but not more than 250 mm, - with a height of 40 mm or more, but not more than 150 mm, - whether or not with water chambers and connectors
- 8483 30 32 90For ball or roller bearings: other
- 8483 30 38 10For use in civil aircraft
- 8483 30 38 60Bearing housing of a kind used in turbochargers: - of precision-cast grey cast iron complying with standard din en 1561 or precision-cast ductile cast iron complying with din en 1560, - with oil chambers, - without bearings, - with a diameter of 50 mm or more, but not more than 250 mm, - with a height of 40 mm or more, but not more than 150 mm, - whether or not with water chambers and connectors
- 8483 30 38 99Bearing housings, not incorporating ball or roller bearings: bearing housings, other, other, other
- 8483 30 80 10For use in civil aircraft
- 8483 30 80 30Commutator end shield (bearing housing with plain shaft bearing) for starter motors of passenger cars and commercial vehicles -produced with high pressure precision die casting technology, -made of aluminium alloy (en ac-46000 or en ac-46000 s, according to the din en 1706 and gb/t 16116 standards), -with sintered plain bearing
- 8483 30 80 90Bearing housings, not incorporating ball or roller bearings: plain shaft bearings, other
- 8483 40 21 10For use in civil aircraft
- 8483 40 21 90Gears and gearing (other than friction gears): spur and helical, other
- 8483 40 23 10For use in civil aircraft
- 8483 40 23 20Bevel gear: -made of lightweight alloys and steel, -built on straight or helical bevel gears, -with an angle between the shafts of 30 degrees or more but not more than 90 degrees -with a gear 1:1.3 ratio or more but not more than 1:1.46, for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery
- 8483 40 23 30Bevel gear: -made of lightweight alloys and steel, -built on straight bevel gears, -with an angle between the shafts of 24 degrees or more but not more than 35 degrees, for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery
- 8483 40 23 90Gears and gearing (other than friction gears): bevel and bevel/spur, other
- 8483 40 25 10For use in civil aircraft
- 8483 40 25 20Worm gearbox -in an aluminium alloy housing, -with a plastic or steel worm, -with mounting holes, -with a 90 degree reversible drive direction, -with a 4:19 transmission ratio, -equipped with a lead screw with a length of 310 mm or more but not more than 380 mm, -with a guide nut incorporated into the assembly bracket, -with or without a lead screw support, for indirect connection to the drive motor of a car seat guide system
- 8483 40 25 90Gears and gearing (other than friction gears): worm gear, other
- 8483 40 29 10For use in civil aircraft
- 8483 40 29 50Gear set of cycloid gear type with: - a rated torque of 50 nm or more but not more than 9 000 nm, - standard ratios of 1:50 or more but not more than 1:475, - lost motion of not more than one arc minute, - an efficiency of more than 80% of a kind used in robot arms
- 8483 40 29 60Epicyclic gearing, of a kind used in driving hand-held power tools with: - a rated torque of 25 nm or more, but not more than 70 nm, - standard gear ratios of 1:12.7 or more, but not more than 1:65.3
- 8483 40 29 70Cast steel planetary cage, with: -external or internal toothing in a diametral pitch standard, -27 teeth or more, but not more than 70 teeth, -a diameter of 300 mm or more, but not more than 725 mm, -a length of 225 mm or more, but not more than 800 mm, -3 or 4 planetary gears, -a hardness of 40 hrc or more, but not more than 45 hrc
- 8483 40 29 89Gears and gearing (other than friction gears): other, other, other
- 8483 40 30 10For use in civil aircraft
- 8483 40 30 90Ball or roller screws: other
- 8483 40 51 10For use in civil aircraft
- 8483 40 51 90Gear boxes and other speed changers: gear boxes, other
- 8483 40 59 10For use in civil aircraft
- 8483 40 59 30Hydrostatic speed changer: -with a hydro pump and a differential with wheel axle, -whether or not with a fan impeller and/or a pulley, for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 20
- 8483 40 59 90Gear boxes and other speed changers: other, other
- 8483 40 90 10For use in civil aircraft
- 8483 40 90 80Transmission gearbox, with: - not more than 3 gears, - an automatic deceleration system and - a power reversal system, for use in the manufacture of goods of heading 8427
- 8483 40 90 99Gears and gearing, other than toothed wheels, chain: other, other
- 8483 50 20 10For use in civil aircraft
- 8483 50 20 90Of cast iron or cast steel: other
- 8483 50 80 10For use in civil aircraft
- 8483 50 80 20Pulley blocks of non-cast steel: - made of structural carbon steel complying with standard jis g4051, - with an external diameter of 104mm or more but not more than 142mm, - with an internal diameter of 33mm or more but not more than 37mm, - with a width of 22mm or more but not more than 40mm, - with a weight of 0.4kg or more but not more than 1.6kg, - with 6 trapezoidal grooves
- 8483 50 80 30Mechanical tensioner for maintaining the tension of the drive belts of a passenger car engine: -with two pulleys made of polyamide, each of them with a diameter of 50 mm or more but not more than 70 mm, -with a spring made of a steel alloy containing chromium and silicon, -with two arms made of aluminum, -with a holder made of aluminum, for use in the manufacture of motor vehicle engines
- 8483 50 80 40Flywheel designed for damping torsional vibrations and oscillations within a vehicle drivetrain with: -a total moment of inertia of 0.082 kg⋅m², -a weight of 7 kg or more, but not more than 8 kg, -a diameter of 250 mm or more, but not more than 280 mm, for use in the manufacture of motor vehicles
- 8483 50 80 50Metal spinned single or double pulley: -made of dc03 steel or similar non alloy steel or free cutting steel, -with a pitch diameter of 67 mm or more but not more than 145 mm, -with an inner hole designed for bearing mounting or key mounting
- 8483 50 80 60Metal spinned triple pulley: -made of dc03 steel or similar non-alloy steel or free cutting steel, -with a pitch diameter of 60 mm or more, but not more than 130 mm, -with an inner hole designed for bearing mounting
- 8483 50 80 90Flywheels and pulleys, including pulley blocks: other, other
- 8483 60 20 10For use in civil aircraft
- 8483 60 20 90Of cast iron or cast steel: other
- 8483 60 80 10For use in civil aircraft
- 8483 60 80 20Overrunning clutch for passenger car and commercial vehicle starter motors with: -a total length of 49.4 mm or more but not more than 210 mm, -a starter motor pinion with 9 or more but not more than 16 teeth
- 8483 60 80 90Clutches and shaft couplings (including universal joints): other, other
- 8483 90 20 10For use in civil aircraft
- 8483 90 20 90Parts of bearing housings: other
- 8483 90 81 10For use in civil aircraft
- 8483 90 81 90Of cast iron or cast steel: other
- 8483 90 89 10For use in civil aircraft
- 8483 90 89 20Sprocket for continuous variable valve timing to optimize the process of filling the cylinders of an internal combustion engine with: -case, -rotor, -at least 4 screws, -spring, -of an external diameter of 80 mm or more but not exceeding 95 mm, -of a thickness of 25 mm or more but not more than 35 mm, for use in the manufacture of engines of motor vehicles
- 8483 90 89 30Forged steel sprockets with external toothing, whether or not with internal splines in a diametral pitch standard, with: -a diameter of 400 mm or more, but not more than 630 mm, -7 teeth or more, but not more than 15 teeth, -a tooth core hardness of 28 hrc or more, but not more than 45 hrc, -a tooth surface hardness of 50 hrc or more, but not more than 60 hrc, -whether or not, a spline hardness of 30 hrc or more, but not more than 45 hrc, -an effective carburised case depth of 4 mm or more, but not more than 5 mm
- 8483 90 89 40Steel alloy gear wheels with straight teeth and involute profile, with: -external and/or internal toothing in a diametral pitch standard, -a diameter of 35 mm or more, but not more than 600 mm, -13 teeth or more, but not more than 80 teeth, -a tooth core hardness of 28 hrc or more, but not more than 45 hrc, -a tooth surface hardness of 50 hrc or more, but not more than 65 hrc, -an effective carburised case depth of 1.00 mm or more, but not more than 3.1 mm, -a spline hardness of 27 hrc or more, but not more than 62 hrc, -whether or not in combination with a shaft with a spline hardness of 27 hrc or more, but not more than 62 hrc
- 8483 90 89 90Toothed wheels, chain sprockets and other transmission: other, other, other
8484 Pakninger og lign. af metalplader i forbindelse med andet materiale eller af to eller flere lag metal; sæt og assortimenter af pakninger og lign. af forskellig beskaffenhed i poser, hylstre eller lignende emballager; mekaniske pakninger
- 8484 10 00 10For use in civil aircraft
- 8484 10 00 90Gaskets and similar joints of metal sheeting combined with: other
- 8484 20 00 10Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units
- 8484 20 00 90Gaskets and similar joints of metal sheeting combined with: mechanical seals, other
- 8484 90 00 10For use in civil aircraft
- 8484 90 00 90Gaskets and similar joints of metal sheeting combined with: other, other
8485 Maskiner til additiv fremstilling
- 8485 10 00 00Machines for additive manufacturing: by metal deposit
- 8485 20 00 00By plastics or rubber deposit
- 8485 30 10 00By plaster, cement, or ceramic deposit
- 8485 30 90 00By plaster, cement, ceramics or glass deposit: other
- 8485 80 10 00Machines for additive manufacturing by sand, concrete or other mineral products deposit
- 8485 80 90 00Machines for additive manufacturing: other, other
- 8485 90 10 00Parts of machines of subheadings 8485 30 10 or 8485 80 10
- 8485 90 90 30Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
- 8485 90 90 90Machines for additive manufacturing: parts, other, other
8486 Maskiner og apparater, der udelukkende eller hovedsagelig anvendes til fremstilling af halvlederstave, -skiver og -komponenter samt elektroniske integrerede kredsløb og fladskærme; maskiner og apparater som nævnt i bestemmelse 11 C til dette kapitel; dele og tilbehør
- 8486 10 00 00Machines and apparatus for the manufacture of boules or wafers
- 8486 20 00 00Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits
- 8486 30 00 00Machines and apparatus for the manufacture of flat panel displays
- 8486 40 00 00Machines and apparatus specified in note 11(c) to this chapter
- 8486 90 00 00Machines and apparatus of a kind used solely or principally: parts and accessories
8487 Dele til maskiner, apparater og mekaniske redskaber ikke andetsteds tariferet i dette kapitel og ikke forsynet med elektriske forbindelsesdele, isolatorer, spoler, kontakter eller andre elektriske dele
- 8487 10 10 00Ships' or boats' propellers and blades therefor: of bronze
- 8487 10 90 00Ships' or boats' propellers and blades therefor: other
- 8487 90 40 10For use in certain types of aircraft
- 8487 90 40 90Machinery parts, not containing electrical connectors: other, of cast iron, other
- 8487 90 51 10For use in certain types of aircraft
- 8487 90 51 90Of iron or steel: of cast steel, other
- 8487 90 57 10For use in certain types of aircraft
- 8487 90 57 90Of open-die forged or closed-die forged iron or steel: other
- 8487 90 59 10For use in certain types of aircraft
- 8487 90 59 90Of iron or steel: other, other
- 8487 90 90 10For use in certain types of aircraft
- 8487 90 90 90Machinery parts, not containing electrical connectors: other, other, other