3920.99: Other plates, sheets, film, foil and strip, of plastics: of other plastics, of other plastics

Duty rates compared

UK Free – 6% Third-country duty 13 tariff lines · average 5% EU Free – 6.5% Third-country duty 6 tariff lines · average 3.3% Türkiye 50% Statutory rate (Law 474) 7 tariff lines USA 4.2% – 6% General (MFN) 3 tariff lines · average 5.3%

The Turkish schedule prints the statutory rate set under Customs Law 474. The rate applied at import is laid down in the Import Regime Decision and can be lower, or different by country of origin.

1. 3920 99 00 00 Of other plastics
2. Of condensation or rearrangement polymerisation products, whether or not chemically modified
3. 3920 99 21 00 Polyimide foil and strip, uncoated, or coated or covered solely with plastic Free
4. 3920 99 28 00 Other 6%
5. 3920 99 28 40 Polymer film containing the following monomers:<br>- poly (tetramethylene ether glycol),<br>- bis (4-isocyanotocyclohexyl) methane,<br>- 1.4-butanediol or 1.3-butanediol,<br>- with a thickness of 0.25 mm or more but not more than 5.0 mm,<br>- embossed with a regular pattern on one surface,<br>- and covered with a release sheet<br> 6%
6. 3920 99 28 50 Thermoplastic polyurethane film (tpu) based on an aliphatic polycaprolactone (pcl), transparently backed on one side with a removable protective film (pet film), with a light transmission of more than 93% (according to din en iso 13468-1), with a thickness of 25μm or more but not more than 500μm 6%
7. 3920 99 28 65 Matt, thermoplastic polyurethane foil in rolls with:<br>- a width of 1640 mm (± 10 mm),<br>- a gloss of 3.3 degrees or more but not more than 3.8 (as determined by the method astm d2457),<br>- a surface roughness of 1.9 ra or more but not more than 2.8 ra (as determined by the method iso 4287),<br>- a thickness of more than 365 µm but not more than 760 µm,<br>- a hardness of 90 (± 4) (as determined by the method: shore a (astm d2240)),<br>- an elongation to break of 470% (as determined by the method: en iso 527)<br> 6%
8. 3920 99 28 70 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:<br>- microspheres with a coating of metal, whether or not alloyed with gold,<br>- an adhesive layer,<br>- with a protective layer of silicone or poly(ethylene terephthalate) on one side, <br>- with a protective layer of poly(ethylene terephthalate) on the other side, and<br>- with a width of 5 cm or more but not more than 100 cm<br>- with a length of not more than 2 000 m 6%
9. 3920 99 28 90 Other 6%
10. Of addition polymerisation products
11. 3920 99 52 00 Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97% or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm Free
12. 3920 99 53 00 Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells
13. 3920 99 59 00 Other 6%
14. 3920 99 59 10 For use in certain types of aircraft 6%
15. Other 6%
16. 3920 99 59 25 Poly(1-chlorotrifluoroethylene) film 6%
17. 3920 99 59 65 Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or more but not more than 90 µm, a tensile strength at break of 20 mpa or more but not more than 55 mpa and an elongation at break of 250% or more but not more than 900% 6%
18. 3920 99 59 90 Other 6%
19. 3920 99 90 00 Other 6%

1. 3920 99 Of other plastics:
2. Of condensation or rearrangement polymerisation products, whether or not chemically modified:
3. 3920 99 21 Polyimide foil and strip, uncoated, or coated or covered solely with plastic Free—
4. 3920 99 28 Other 6.5%—
5. Of addition polymerisation products:
6. 3920 99 52 Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm Free—
7. 3920 99 53 Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells Free—
8. 3920 99 59 Other 6.5%—
9. 3920 99 90 Other 6.5%—

This line has no official text in this language; it is shown in the language of its tariff.

1. 3920.99 Diğer plastiklerden olanlar:
2. Kondensasyon veya çevrilme polimerizasyonu ürünlerinden olanlar (kimyasal olarak tadil edilmiş olsun olmasın):
3. 3920.99.21.00.00 Poliimid folyo ve şerit (sıvanmamış veya sadece plastikle sıvanmış ya da kaplanmış) 50%
4. 3920.99.28.00.00 Diğerleri 50%
5. Katılma polimerizasyonu ürünlerinden olanlar:
6. 3920.99.52.00.00 Bioryante poli(vinil alkol) film (ağırlık itibariyle % 97 veya daha fazla poli(vinil alkol) içeren, kaplanmamış kalınlığı 1 mm'yi geçmeyen) 50%
7. 3920.99.53.00.00 İyon değiştirici membranlar (kloralkali elektrolitik pillerde kullanıl- maya mahsus florlanmış plastik malzemeden) 50%
8. 3920.99.59.00.00 Diğerleri 50%
9. Diğerleri :
10. 3920.99.90.10.00 Sertleştirilmiş proteinlerden olanlar 50%
11. 3920.99.90.90.00 Diğerleri 50%

1. 3920.99 Of other plastics:
2. Film, strip and sheets, all the foregoing which are flexible:
3. 3920.99.10.00 Over 0.152 mm in thickness, and not in rolls 6%kg
4. 3920.99.20.00 Other 4.2%kg
5. 3920.99.50.00 Other 5.8%kg

Special: reduced rates under trade agreements and preference programmes; the letters in brackets name the programmes (for example AU = Australia FTA, KR = Korea FTA).

World trade in 2024

Top exporters

Rank	Country	Value	Share
1	Japan	US$1.9bn	26.4%
2	United States	US$1.3bn	18.7%
3	China	US$1.2bn	16.4%
4	Germany	US$437.6m	6.1%
5	South Korea	US$382.5m	5.4%
6	Taiwan	US$338.7m	4.7%
7	Italy	US$208.6m	2.9%
8	United Kingdom	US$207.5m	2.9%
9	Netherlands	US$127.2m	1.8%
10	France	US$126.1m	1.8%

Top importers

Rank	Country	Value	Share
1	China	US$1.9bn	26.2%
2	India	US$388.1m	5.4%
3	Vietnam	US$370.3m	5.2%
4	South Korea	US$355.4m	5%
5	United States	US$345m	4.8%
6	Germany	US$343.7m	4.8%
7	Mexico	US$272.8m	3.8%
8	Taiwan	US$218.9m	3.1%
9	Japan	US$215.9m	3%
10	France	US$212.9m	3%

Questions and answers