Subheading · Section XV

7211.13: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief

7211.13
  • 50%UK
  • FreeEU
  • 15%–30%Türkiye
  • FreeUSA
  • US$196.1mWorld trade in 2024

7211.13 is a six-digit subheading of heading 7211, flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, chapter 72.

In the UK Global Tariff, subheading 7211.13 covers 2 tariff lines and the duty is 50%.

The EU Combined Nomenclature has one tariff line for subheading 7211.13; the duty is duty-free.

In the Turkish Customs Tariff Schedule, subheading 7211.13 covers 3 tariff lines and the statutory rate is between 15% and 30%.

The Harmonized Tariff Schedule of the United States has one tariff line for subheading 7211.13; the duty is duty-free.

World trade in these goods reached US$196.1m in 2024, down 20.5% on 2023.

Italy was the largest exporter with 18.5% of the total, ahead of the Czechia.

Germany imported the most (US$41m).

The United Kingdom ranked 20th among 62 exporters with US$330.8k.

The United Kingdom imported US$7.5m, most of it from France.

Duty rates compared

UK 50% Third-country duty 2 tariff lines EU Free Third-country duty 1 tariff line Türkiye 15% – 30% Statutory rate (Law 474) 3 tariff lines · average 25% USA Free General (MFN) 1 tariff line

The Turkish schedule prints the statutory rate set under Customs Law 474. The rate applied at import is laid down in the Import Regime Decision and can be lower, or different by country of origin.

UK Global Tariff

UK lines →
  1. 7211 13 00 00 Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief 50%
  2. 7211 13 00 11 Of a width not exceeding 350 mm and of a thickness of 50 mm or more 50%
  3. 7211 13 00 19 Other 50%

EU Combined Nomenclature

EU lines →
  1. 7211 13 00 Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief Free—

Turkish Customs Tariff Schedule

Türkiye lines →

This line has no official text in this language; it is shown in the language of its tariff.

  1. 7211.13 Dört yüzeyi açık veya kapalı usul ile haddelenmiş, genişliği 150 mm.yi geçen ve kalınlığı 4 mm. den az olmayan (rulo halinde olmayan) ve üzerlerinde kabartmalı motifler bulunmayanlar:
  2. Geniş levhalar:
  3. 7211.13.00.11.00 Ağırlık itibariyle % 0,6 veya daha fazla karbon içerenler 30%
  4. 7211.13.00.19.00 Diğerleri 15%
  5. 7211.13.00.29.00 Diğerleri 30%

Harmonized Tariff Schedule of the United States

USA lines →
  1. 7211.13.00.00 Universal mill plate Freekg

World trade in 2024

7211.13 · US$196.1m

Trade value (US$) no reported trade < US$118.3kUS$118.3k+US$1.5m+US$13.6m+> US$28.3m

Exports: 62
  1. Italy: US$36.2m
  2. Czechia: US$28.3m
  3. France: US$22.2m
  4. Germany: US$21.7m
  5. United States: US$16m
  6. Sweden: US$13.6m
  7. Switzerland: US$12.9m
  8. Poland: US$12m
  9. Finland: US$6.2m
  10. China: US$5.3m
  11. Netherlands: US$4.6m
  12. Spain: US$4.5m
  13. Malaysia: US$2.6m
  14. Belgium: US$1.7m
  15. Austria: US$1.5m
  16. Denmark: US$1.4m
  17. Türkiye: US$1.2m
  18. Luxembourg: US$623.5k
  19. Japan: US$454.6k
  20. United Kingdom: US$330.8k
  21. Marshall Islands: US$259.4k
  22. Singapore: US$248k
  23. Oman: US$215.8k
  24. Saudi Arabia: US$207.2k
  25. Hungary: US$192.6k
  26. Senegal: US$186.2k
  27. Argentina: US$173.8k
  28. Portugal: US$146.9k
  29. Estonia: US$122.8k
  30. Ireland: US$118.3k
  31. Slovakia: US$111.5k
  32. Slovenia: US$110.5k
  33. Norway: US$95.5k
  34. Lithuania: US$89.6k
  35. India: US$65.2k
  36. Bulgaria: US$64.1k
  37. Thailand: US$61.6k
  38. Indonesia: US$57.7k
  39. Vietnam: US$50.1k
  40. South Korea: US$38.3k
  41. Mexico: US$32.8k
  42. Brunei: US$28.3k
  43. Greece: US$20.4k
  44. Australia: US$14.8k
  45. Russia: US$14.2k
  46. South Africa: US$12.4k
  47. United Arab Emirates: US$12k
  48. Canada: US$6.8k
  49. Serbia: US$5.8k
  50. Taiwan: US$5.7k
  51. Colombia: US$3.3k
  52. Brazil: US$3k
  53. Botswana: US$2.8k
  54. Latvia: US$2k
  55. Hong Kong SAR China: US$1.8k
  56. North Macedonia: US$1.5k
  57. Romania: US$1.5k
  58. Croatia: US$900
  59. Philippines: US$500
  60. Cyprus: US$0

Top exporters

RankCountryValueShare
1 Italy US$36.2m 18.5%
2 Czechia US$28.3m 14.4%
3 France US$22.2m 11.3%
4 Germany US$21.7m 11.1%
5 United States US$16m 8.1%
6 Sweden US$13.6m 7%
7 Switzerland US$12.9m 6.6%
8 Poland US$12m 6.1%
9 Finland US$6.2m 3.2%
10 China US$5.3m 2.7%

Top importers

RankCountryValueShare
1 Germany US$41m 20.9%
2 Denmark US$20.1m 10.3%
3 Netherlands US$15.8m 8.1%
4 Mexico US$12.9m 6.6%
5 France US$12.6m 6.4%
6 Italy US$8.1m 4.1%
7 United Kingdom US$7.5m 3.8%
8 Austria US$6.2m 3.2%
9 Belgium US$6m 3.1%
10 Switzerland US$5.9m 3%

Questions and answers

What is the HS code for rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief?

Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief fall under HS subheading 7211.13, part of heading 7211, in section XV of the Harmonized System.

What is the import duty on rolled on four faces or in a closed box pass, of… in the UK?

Under the UK Global Tariff, imports under 7211.13 from countries without a preferential agreement are charged at 50%. Preferential rates, anti-dumping duties and VAT are not included.

What is the import duty on rolled on four faces or in a closed box pass, of… in the EU?

Under the EU Combined Nomenclature, imports under 7211.13 from countries without a preferential agreement are free of duty. Preferential rates, anti-dumping duties and VAT are not included.

Which country exports the most rolled on four faces or in a closed box pass, of…?

Italy, with US$36.2m in 2024 (18.5% of world exports).