7607.11: Rolled but not further worked

Duty rates compared

UK 6% – 7.5% Third-country duty 36 tariff lines · average 6.1% EU 7.5% Third-country duty 3 tariff lines Türkiye 50% Statutory rate (Law 474) 3 tariff lines USA 3% – 5.8% General (MFN) 3 tariff lines · average 4.7%

The Turkish schedule prints the statutory rate set under Customs Law 474. The rate applied at import is laid down in the Import Regime Decision and can be lower, or different by country of origin.

1. 7607 11 00 00 Rolled but not further worked
2. Of a thickness of less than 0.021 mm
3. 7607 11 11 00 In rolls of a weight not exceeding 10 kg
4. Of a thickness of 0.007 mm or more but less than 0.021 mm
5. 7607 11 11 11 Consigned from Thailand 7.5%
6. 7607 11 11 19 Other 7.5%
7. 7607 11 11 90 Other 6%
8. 7607 11 19 00 Other 6%
9. 7607 11 19 10 For household use, of a thickness of not less than 0.008 mm and not more than 0.018 mm, in rolls of a width not exceeding 650 mm 6%
10. 7607 11 19 30 For household use, of a thickness of not less than 0.007 mm and less than 0.008 mm, whether or not annealed 6%
11. 7607 11 19 40 For household use, of a thickness of not less than 0.008 mm and not more than 0.018 mm, in rolls of a width exceeding 650 mm, whether or not annealed 6%
12. 7607 11 19 50 For household use, of a thickness of more than 0.018 mm and less than 0.021 mm, whether or not annealed 6%
13. 7607 11 19 60 For other uses than household aluminium foil,<br>- of a thickness of not less than 0.007 mm and less than 0.008 mm, whether or not annealed, or,<br>- of a thickness of not less than 0.008 mm and not more than 0.018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or,<br>- of a thickness of more than 0.018 mm and less than 0.021 mm, whether or not annealed 6%
14. Other 6%
15. 7607 11 19 91 Aluminium converter foil 6%
16. 7607 11 19 94 Household aluminium foil 6%
17. 7607 11 19 96 Other 6%
18. 7607 11 90 00 Of a thickness of not less than 0.021 mm but not more than 0.2 mm 6%
19. Aluminium foil in rolls:<br>- having a purity of 99.99% by weight, <br>- of a thickness of 0.021 mm or more but not more than 0.2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95% 6%
20. Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers 6%
21. 7607 11 90 44 Of a thickness of not less than 0.03 mm, without internal layers of other material 6%
22. 7607 11 90 46 Other 6%
23. Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil 6%
24. 7607 11 90 48 Of a thickness of not less than 0.03 mm, without internal layers of other material 6%
25. 7607 11 90 49 Other 6%
26. Other 6%
27. 7607 11 90 51 Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips 6%
28. Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles 6%
29. Without internal layers of other material 6%
30. 7607 11 90 52 Alloyed, for use as body panels in the car industry 6%
31. 7607 11 90 53 Other 6%
32. 7607 11 90 54 Other 6%
33. 7607 11 90 56 Other 6%
34. Plain aluminium foil with the following parameters:<br>- an aluminium content of 99.98% or more<br>- a thickness of 0.070 mm or more but not more than 0.125 mm<br>- with a cubic texture of a kind used for high voltage etching 6%
35. 7607 11 90 65 Plain aluminium foil with the following parameters:<br>-an aluminium content of 99.98% or more,<br>-a thickness of 0.070 mm or more but not more than 0.125 mm,<br>-with a cubic texture,<br>of a kind used for high voltage etching 6%
36. 7607 11 90 67 Plain aluminium foil with the following parameters:<br>-an aluminium content of 99.98% or more,<br>-a thickness of 0.070 mm or more but not more than 0.125 mm,<br>-with a cubic texture,<br>of a kind used for high voltage etching 6%
37. Other 6%
38. Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers 6%
39. 7607 11 90 71 Of a thickness of not less than 0.03 mm, without internal layers of other material 6%
40. 7607 11 90 72 Other 6%
41. Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil 6%
42. 7607 11 90 73 Of a thickness of not less than 0.03 mm, without internal layers of other material 6%
43. 7607 11 90 74 Other 6%
44. Aluminium and magnesium alloy strip or foil:<br>- of an alloy conforming to standards 5182-h19 or 5052-h19,<br>- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,<br>- of a thickness (tolerance - 0.006 mm) of 0.15 mm, 0.16 mm, 0.18 mm or 0.20 mm,<br>- of a width ( tolerance ± 0.3 mm) of 12.5 mm, 15.0 mm, 16.0 mm, 25.0 mm, 35.0 mm, 50.0 mm or 356 mm, <br>- having a camber tolerance of not more than 0.4 mm/750 mm,<br>- of a flatness measurement: i-unit ±4,<br>- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,<br>- of an elongation a50 of more than (5182-h19) 3% or (5052-h19) 2.5%<br>for use in the manufacture of slats for blinds<br> 6%
45. 7607 11 90 75 Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips 6%
46. Of a thickness of 0.2 mm 6%
47. Without internal layers of other material 6%
48. 7607 11 90 76 For use as body panels in the car industry 6%
49. 7607 11 90 77 Other 6%
50. 7607 11 90 78 Other 6%
51. 7607 11 90 79 Other 6%
52. Other 6%
53. 7607 11 90 91 Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips 6%
54. Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles 6%
55. Without internal layers of other material 6%
56. 7607 11 90 92 Alloyed, for use as body panels in the car industry 6%
57. 7607 11 90 93 Other 6%
58. 7607 11 90 94 Other 6%
59. 7607 11 90 96 Other 6%

1. 7607 11 Rolled but not further worked:
2. Of a thickness of less than 0,021 mm:
3. 7607 11 11 In rolls of a weight not exceeding 10 kg 7.5%—
4. 7607 11 19 Other 7.5%—
5. 7607 11 90 Of a thickness of not less than 0,021 mm but not more than 0,2 mm 7.5%—

This line has no official text in this language; it is shown in the language of its tariff.

1. 7607.11 Haddelenmiş fakat daha ileri bir işleme tabi tutulmamış:
2. Kalınlığı 0,021 mm. den az olanlar :
3. 7607.11.11.00.00 Ağırlığı 10 kg'yi geçmeyen rulolar halinde olanlar 50%
4. 7607.11.19.00.00 Diğerleri 50%
5. 7607.11.90.00.00 Kalınlığı 0,021 mm. veya daha fazla,fakat 0,2 mm. yi geçmeyenler 50%

1. 7607.11 Rolled but not further worked:
2. Of a thickness not exceeding 0.15 mm:
3. 7607.11.30.00 Of a thickness not exceeding 0.01 mm 5.8%kg
4. 7607.11.60 Of a thickness exceeding 0.01 mm 5.3%
5. 7607.11.60.10 Boxed aluminum foil weighing not more than 11.3 kg kg, m2
6. 7607.11.60.90 Other kg, m2
7. 7607.11.90 Other 3%
8. Aluminum can stock:
9. 7607.11.90.30 Body stock kg
10. 7607.11.90.60 Lid stock kg
11. 7607.11.90.90 Other kg

Special: reduced rates under trade agreements and preference programmes; the letters in brackets name the programmes (for example AU = Australia FTA, KR = Korea FTA).

World trade in 2024

Top exporters

Rank	Country	Value	Share
1	China	US$3.2bn	42.1%
2	Germany	US$802.8m	10.6%
3	Türkiye	US$441.3m	5.8%
4	Italy	US$350m	4.6%
5	United States	US$346.1m	4.6%
6	South Korea	US$300.3m	4%
7	Greece	US$233.1m	3.1%
8	Thailand	US$159.9m	2.1%
9	Slovenia	US$147.7m	2%
10	Japan	US$138.2m	1.8%

Top importers

Rank	Country	Value	Share
1	United States	US$854.7m	11.3%
2	Mexico	US$566.4m	7.5%
3	Germany	US$426.4m	5.6%
4	India	US$331.1m	4.4%
5	Italy	US$319.3m	4.2%
6	Thailand	US$312.9m	4.1%
7	Poland	US$277.6m	3.7%
8	France	US$270m	3.6%
9	Indonesia	US$208.9m	2.8%
10	Japan	US$204.2m	2.7%

Questions and answers