Colný sadzobník Spojeného kráľovstva · kód tovaru UK · HS 8708.50
8708 50 20 80: Hnacie a nehnané nápravy a ich diely: Specific pre-assembled or ready-to assemble sections for new mobile cranes
Hnacie a nehnané nápravy a ich diely
✓ Možno použiť v colnom vyhlásení Údaje: Colný sadzobník Spojeného kráľovstva · overené 24. októbra 2026
Tento kód nemá úradné znenie v slovenčine; zobrazuje sa v jazyku svojho sadzobníka.
- 8708 Parts and accessories of the motor vehicles of headings 8701 to 8705
- 8708 50 00 00 Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof
- 8708 50 20 00 For the industrial assembly of: vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3; vehicles of heading 8705
- 8708 50 20 80 Specific pre-assembled or ready-to assemble sections for new mobile cranes
Koľko zaplatíte
Dovoz: Británia
Dodatočné clá a dovozné podmienky
Platby nad rámec cla a podmienky, ktoré musí tovar splniť na hranici.
Dodatočné clá a poplatky 2
- Dodatočné cloDoplnkové clo 35 %
- Platí pre krajinu pôvodu
- Bielorusko, Rusko
- Právny predpis
- 2022 No. 598
- Doklady
- 9014
- Pozastavenie claNepreferenčné clo pre konečné použitie 2 %
- Platí pre krajinu pôvodu
- všetky krajiny
- Právny predpis
- S.I. 2020/1430
- Doklady
- N990 EUS - Povolenie vo veci použitia colného režimu konečné použitie (stĺpec 8c, príloha A k delegovanému nariadeniu (EÚ) 2015/2446)
Dovozné podmienky 5
- Zákaz alebo obmedzenieZákaz dovozu
- Platí pre krajinu pôvodu
- Severná Kórea
- Právny predpis
- S.I. 2019/411
- Dovozná kontrolaObmedzenie prepustenia do voľného obehu
- Platí pre krajinu pôvodu
- Bielorusko, Irak, Rusko, Sýria, Ukrajina
- Právny predpis
- 2022 No. 748, S.I. 2020/707, S.I. 2019/792, S.I. 2022/395
- Doklady
- 9024
- 9032
- 9025
- 9009
- 9010
- 9017
- Dovozná kontrolaObmedzenie prepustenia do voľného obehu
- Platí pre krajinu pôvodu
- všetky krajiny
- Právny predpis
- S.I. 2019/583
- Doklady
- L100 Dovozná licencia “kontrolované látky” (ozón), vystavená Komisiou
- Y902
- 9Y06
- Dovozná kontrolaDovozná kontrola tovaru a technológií, ktoré sú predmetom obmedzenia
- Platí pre krajinu pôvodu
- Irán, Líbya, Rusko
- Právny predpis
- S.I. 2019/461, 2020 No. 1665, S.I. 2019/855
- Dovozná kontrolaDovozná kontrola luxusného tovaru
- Platí pre krajinu pôvodu
- Severná Kórea
- Právny predpis
- S.I. 2019/411
- Doklady
- Y945 Predmety osobnej potreby cestujúcich alebo tovar neobchodnej povahy určený na osobné použitie cestujúcich, ktorý sa nachádza v ich batožine (článok 10 ods. 2 nariadenia (EÚ) 2017/1509)
- Y946 Tovar potrebný na úradné účely diplomatických alebo konzulárnych misií členských štátov v KĽDR alebo medzinárodných organizácií, ktoré požívajú imunity v súlade s medzinárodným právom, alebo predmety osobnej potreby ich personálu (článok 10 ods. 3 nariadenia (EÚ) 2017/1509)
- Y948 Tovar iný ako uvedený v prílohe VIII (luxusný tovar) k nariadeniu (EÚ) 2017/1509
Preferenčné sadzby podľa krajín
| Dohoda alebo preferenčný systém | Krajiny | Sadzba |
|---|---|---|
| štandardná sadzba (bez dohody) | — | |
| DCTS Comprehensive | Afganistan, Angola, Bangladéš, Benin a 38 ďalšíchAfganistan, Angola, Bangladéš, Benin, Bhután, Burkina Faso, Burundi, Čad, Džibutsko, Eritrea, Etiópia, Gambia, Guinea, Guinea-Bissau, Haiti, Jemen, Južný Sudán, Kambodža, Kiribati, Komory, Konžská demokratická republika, Laos, Libéria, Malawi, Mali, Mauritánia, Mjanmarsko, Nepál, Niger, Rwanda, Senegal, Sierra Leone, Somálsko, Stredoafrická republika, Sudán, Svätý Tomáš a Princov ostrov, Tanzánia, Togo, Tuvalu, Uganda, Východný Timor, Zambia | Bez cla |
| Európska únia (vrátane kódu "EU") | Belgicko, Bulharsko, Cyprus, Česko a 23 ďalšíchBelgicko, Bulharsko, Cyprus, Česko, Dánsko, Estónsko, Fínsko, Francúzsko, Grécko, Holandsko, Chorvátsko, Írsko, Litva, Lotyšsko, Luxembursko, Maďarsko, Malta, Nemecko, Poľsko, Portugalsko, Rakúsko, Rumunsko, Slovensko, Slovinsko, Španielsko, Švédsko, Taliansko | Bez cla |
| DCTS Enhanced | Alžírsko, Bolívia, Cookove ostrovy, Filipíny a 13 ďalšíchAlžírsko, Bolívia, Cookove ostrovy, Filipíny, Kapverdy, Kirgizsko, Konžská republika, Mikronézia, Mongolsko, Nigéria, Niue, Pakistan, Srí Lanka, Sýria, Tadžikistan, Uzbekistan, Vanuatu | Bez cla |
| CARIFORUM | Antigua a Barbuda, Bahamy, Barbados, Belize a 10 ďalšíchAntigua a Barbuda, Bahamy, Barbados, Belize, Dominika, Dominikánska republika, Grenada, Guyana, Jamajka, Surinam, Svätá Lucia, Svätý Krištof a Nevis, Svätý Vincent a Grenadíny, Trinidad a Tobago | Bez cla |
| ZKÚ (Zámorské krajiny a Ùzemia) | Anguilla, Bermudy, Britské indickooceánske územie, Britské Panenské ostrovy a 7 ďalšíchAnguilla, Bermudy, Britské indickooceánske územie, Britské Panenské ostrovy, Falklandy, Južná Georgia a Južné Sandwichove ostrovy, Kajmanie ostrovy, Montserrat, Pitcairnove ostrovy, Svätá Helena, Turks a Caicos | Bez cla |
| Stredná Amerika | Guatemala, Honduras, Kostarika, Nikaragua, Panama, Salvádor | Bez cla |
| SADC EPA | Botswana, Eswatini, Lesotho, Mozambik, Namíbia | Bez cla |
| Štáty východnej a južnej Afriky | Madagaskar, Maurícius, Seychely, Zimbabwe | Bez cla |
| CPTPP | Brunej, Malajzia | Bez cla |
| dohoda Británia–Andorra | Andorra | Bez cla |
| dohoda Británia–Albánsko | Albánsko | Bez cla |
| dohoda Británia–Austrália | Austrália | Bez cla |
| dohoda Británia–Kanada | Kanada | Bez cla |
| dohoda Británia–Švajčiarsko | Švajčiarsko | Bez cla |
| dohoda Británia–Pobrežie Slonoviny | Pobrežie Slonoviny | Bez cla |
| dohoda Británia–Čile | Čile | Bez cla |
| dohoda Británia–Kamerun | Kamerun | Bez cla |
| dohoda Británia–Kolumbia | Kolumbia | Bez cla |
| dohoda Británia–Ceuta a Melilla | Ceuta a Melilla | Bez cla |
| dohoda Británia–Ekvádor | Ekvádor | Bez cla |
| dohoda Británia–Egypt | Egypt | Bez cla |
| dohoda Británia–Fidži | Fidži | Bez cla |
| dohoda Británia–Faerské ostrovy | Faerské ostrovy | Bez cla |
| dohoda Británia–Gruzínsko | Gruzínsko | Bez cla |
| dohoda Británia–Ghana | Ghana | Bez cla |
| DCTS Standard | Indonézia | Bez cla |
| dohoda Británia–Izrael | Izrael | Bez cla |
| dohoda Británia–India | India | Bez cla |
| dohoda Británia–Island | Island | Bez cla |
| dohoda Británia–Jordánsko | Jordánsko | Bez cla |
| dohoda Británia–Japonsko | Japonsko | Bez cla |
| dohoda Británia–Keňa | Keňa | Bez cla |
| dohoda Británia–Južná Kórea | Južná Kórea | Bez cla |
| dohoda Británia–Libanon | Libanon | Bez cla |
| dohoda Británia–Lichtenštajnsko | Lichtenštajnsko | Bez cla |
| dohoda Británia–Maroko | Maroko | Bez cla |
| dohoda Británia–Moldavsko | Moldavsko | Bez cla |
| dohoda Británia–Severné Macedónsko | Severné Macedónsko | Bez cla |
| dohoda Británia–Mexiko | Mexiko | Bez cla |
| dohoda Británia–Nórsko | Nórsko | Bez cla |
| dohoda Británia–Nový Zéland | Nový Zéland | Bez cla |
| dohoda Británia–Peru | Peru | Bez cla |
| dohoda Británia–Papua-Nová Guinea | Papua-Nová Guinea | Bez cla |
| dohoda Británia–Palestínske územia | Palestínske územia | Bez cla |
| dohoda Británia–Srbsko | Srbsko | Bez cla |
| dohoda Británia–Šalamúnove ostrovy | Šalamúnove ostrovy | Bez cla |
| dohoda Británia–Singapur | Singapur | Bez cla |
| dohoda Británia–San Maríno | San Maríno | Bez cla |
| dohoda Británia–Tunisko | Tunisko | Bez cla |
| dohoda Británia–Turecko | Turecko | Bez cla |
| dohoda Británia–Ukrajina | Ukrajina | Bez cla |
| dohoda Británia–Vietnam | Vietnam | Bez cla |
| dohoda Británia–Samoa | Samoa | Bez cla |
| dohoda Británia–Kosovo | Kosovo | Bez cla |
| dohoda Británia–Južná Afrika | Južná Afrika | Bez cla |
Poznámky pod čiarou
TN200 The export of these items may be controlled under the Export Control Order 2008 as amended…
TN207 The Democratic People’s Republic of Korea (Sanctions) (EU Exit) Regulations 2019 impose tr…
TN701 According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9), as retained in UK La…
The prohibition shall not apply in respect of:
(a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established.
(b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014, as retained in UK Law, or in accordance with the EU-Ukraine Association Agreement
Británia: mesačný dovoz · HS 8708.50
Hlavní dodávatelia, posledných 12 mesiacov
| Krajina | Hodnota | Podiel | Zmena |
|---|---|---|---|
| 249,2 mil. GBP | 28,3 % | +26,9 % | |
| 101,5 mil. GBP | 11,5 % | -9,6 % | |
| 98,2 mil. GBP | 11,1 % | +9,7 % | |
| 76,2 mil. GBP | 8,6 % | -13,8 % | |
| 72,3 mil. GBP | 8,2 % | +14,3 % | |
| 57,7 mil. GBP | 6,5 % | +32,6 % | |
| 50 mil. GBP | 5,7 % | +23 % | |
| 36,1 mil. GBP | 4,1 % | +36,2 % |
Rovnaká podpoložka v iných sadzobníkoch
Kódy – Británia: 8708.50
- 8708 50 20 15Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened
- 8708 50 20 18Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1.4 m or more but not more than 2.4 m, for use in the production of goods of chapter 87
- 8708 50 20 20Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
- 8708 50 20 25Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%, -forged, turned, milled and hardened
- 8708 50 20 35Inboard constant velocity joint tripod housing, with: -an outer diameter of 67.0 mm or more but not more than 99.0 mm, -3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
- 8708 50 20 50Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 20 55Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm, -forged, turned, broached and hardened
- 8708 50 20 70Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67.0 mm or more but not more than 84.5 mm, -3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm, - sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves
- 8708 50 20 75Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13.0mm or more but not more than 28.0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
- 8708 50 20 80Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 20 90For the industrial assembly of: other
- 8708 50 35 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 35 90Drive-axles with differential, whether or not provided with: other
- 8708 50 55 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 55 20Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 55 50Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened
- 8708 50 55 91Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 55 99Of closed-die forged steel: other
- 8708 50 91 10Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 91 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 91 90Drive-axles with differential, whether or not provided with: other, parts, other, for non-driving axles, other
- 8708 50 99 10Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
- 8708 50 99 25Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67.0 mm or more but not more than 84.5 mm, -3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm, - sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves
- 8708 50 99 35Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13.0mm or more but not more than 28.0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
- 8708 50 99 40Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 99 45Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%, -forged, turned, milled and hardened
- 8708 50 99 50Inboard constant velocity joint tripod housing, with: -an outer diameter of 67.0 mm or more but not more than 99.0 mm, -3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
- 8708 50 99 60Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm, -forged, turned, broached and hardened
- 8708 50 99 70Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 99 90Drive-axles with differential, whether or not provided with: other, parts, other
Záväzné rozhodnutia pre podobný tovar
Rozhodnutia colnej správy USA (CBP, CROSS) a britskej HMRC (Advance Tariff Rulings) o tovare zaradenom sem. Rozhodnutie zaväzuje len svojho držiteľa, ale ukazuje, ako úrady zaraďujú podobný tovar. Opisy sú anglické texty úradov.
- N364933 U.S. CBP
The tariff classification of an automotive shim from South Korea
- N344019 U.S. CBP
The tariff classification of power train flanges from Japan
- N342419 U.S. CBP
The tariff classification of differential components from China
- N336861 U.S. CBP
The tariff classification and country of origin of half-shafts
- 600015867 HMRC
This is a third generation double angular contact flanged bearing used on the non-driving axles of motor vehicles. It contains an outer ring, inner ring, inner shaft, 22-28 steel balls, retainer, pulsar ring and seal. These are all separate finished products that are third generation double…
- 600016887 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
- 600016888 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
- 600015859 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
spolu rozhodnutí k tomuto kódu: 13
Poznámky
Poznámka k podpoložkám
1. Podpoložka 870822 zahŕňa:
a) predné sklá (čelné sklá), zadné sklá a ostatné sklá, zarámované; a
b) predné sklá (čelné sklá), zadné sklá a ostatné sklá, tiež zarámované, so zabudovanými ohrievacími zariadeniami alebo ostatnými elektrickými alebo elektronickými zariadeniami
ak sú vhodné výlučne alebo hlavne na použitie s motorovými vozidlami položiek 8701 až 8705.
Kód tovaru UK 8708 50 20 80 patrí pod podpoložku HS 8708.50 (hnacie nápravy s diferenciálom).
Priamo pri tomto kóde nie je uvedená sadzba.
V Spojenom kráľovstve sa na tovar z krajín: Bielorusko a Rusko navyše uplatňuje dodatočné clo vo výške 35 %.
Dovoz do Spojeného kráľovstva v podpoložke HS 8708.50 – hnacie a nehnané nápravy a ich diely – (september 2025 – august 2026): 881,9 mil. GBP, o 5 % viac ako v predchádzajúcich 12 mesiacoch; najväčší dodávateľ: Taliansko (28 %), za ním Nemecko.
Rovnaká podpoložka v iných sadzobníkoch: EÚ 3 % – 4,5 %; Turecko 3 % – 4,5 %; USA 0 % – 2,5 %; Kanada 0 % – 6 %; Mexiko 0 % – 25 %; Brazília 7,2 % – 18 %; Argentína 0 % – 18 %; Peru bez cla; Nový Zéland 0 % – 5 %; Japonsko bez cla; Taiwan 2,5 % – 15 %; GCC 5 %; Švajčiarsko bez cla; Nórsko bez cla; Severné Macedónsko 0 % – 15 %; Nigéria 10 %.
Dovoz tovaru podpoložky 8708.50 do Spojeného kráľovstva dosiahol v roku 2024 hodnotu 1,1 mld. USD; najväčší dodávateľ: Taliansko.
Otázky a odpovede
Odkiaľ sa tento tovar dováža do Spojeného kráľovstva?
Najväčší dodávateľ celej podpoložky 8708.50 v roku 2024: Taliansko (242 mil. USD), na druhom mieste Belgicko.
Platí pre 8708 50 20 80 antidumpingové alebo iné dodatočné clo?
Dodatočné clo vo výške 35 % na tovar z krajín: Bielorusko a Rusko. Tieto clá sa vyberajú popri bežnom cle.