Subheading · Section XV

7208.52: Of a thickness of 4,75 mm or more but not exceeding 10 mm

7208.52
  • 0%–50%UK
  • FreeEU
  • 30%Türkiye
  • FreeUSA
  • US$4.5bnWorld trade in 2024

Subheading 7208.52 belongs to heading 7208 (flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more…) in chapter 72.

The UK Global Tariff divides subheading 7208.52 into 4 tariff lines; the duty is between 0% and 50% (average 25%). 2 of them are duty-free.

In the EU Combined Nomenclature, subheading 7208.52 covers 3 tariff lines and the duty is duty-free.

The Turkish Customs Tariff Schedule divides subheading 7208.52 into 6 tariff lines; the statutory rate is 30%.

Subheading 7208.52 is a single line in the Harmonized Tariff Schedule of the United States, where the duty is duty-free.

In 2024, countries exported these goods worth US$4.5bn (−12.6% year on year).

The largest exporter was China (US$1.1bn), followed by Japan.

The biggest buyer was Germany, with imports of US$405.1m.

The United Kingdom ranked 26th among 110 exporters with US$28.3m; its largest buyer was Ireland.

The United Kingdom imported US$66.6m, most of it from the Netherlands.

Duty rates compared

UK Free – 50% Third-country duty 4 tariff lines · average 25% EU Free Third-country duty 3 tariff lines Türkiye 30% Statutory rate (Law 474) 6 tariff lines USA Free General (MFN) 1 tariff line

The Turkish schedule prints the statutory rate set under Customs Law 474. The rate applied at import is laid down in the Import Regime Decision and can be lower, or different by country of origin.

UK Global Tariff

UK lines →
  1. 7208 52 00 00 Of a thickness of 4.75 mm or more but not exceeding 10 mm
  2. 7208 52 10 00 Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm 50%
  3. Other, of a width of
  4. 7208 52 91 00 2 050 mm or more Free
  5. 7208 52 91 10 Of non-alloy steel, excluding tool steel<br> Free
  6. 7208 52 91 90 Other Free
  7. 7208 52 99 00 Less than 2 050 mm 50%

EU Combined Nomenclature

EU lines →
  1. 7208 52 Of a thickness of 4,75 mm or more but not exceeding 10 mm:
  2. 7208 52 10 Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm Free—
  3. Other, of a width of:
  4. 7208 52 91 2050 mm or more Free—
  5. 7208 52 99 Less than 2050 mm Free—

Turkish Customs Tariff Schedule

Türkiye lines →

This line has no official text in this language; it is shown in the language of its tariff.

  1. 7208.52 Kalınlığı 4,75 mm.veya daha fazla fakat 10 mm.yi geçmeyenler :
  2. Kapalı usulle veya dört yüzü haddelenmiş, genişliği 1250 mm.yi geçmeyenler :
  3. 7208.52.10.10.00 Ağırlık itibariyle % 0,6 veya daha fazla karbon içerenler 30%
  4. 7208.52.10.90.00 Diğerleri 30%
  5. Diğerleri
  6. Genişlikleri 2050 mm. veya daha fazla olanlar
  7. 7208.52.91.10.00 Ağırlık itibariyle % 0,6 veya daha fazla karbon içerenler 30%
  8. 7208.52.91.90.00 Diğerleri 30%
  9. Genişlikleri 2050 mm.den az olanlar
  10. 7208.52.99.10.00 Ağırlık itibariyle % 0,6 veya daha fazla karbon içerenler 30%
  11. 7208.52.99.90.00 Diğerleri 30%

Harmonized Tariff Schedule of the United States

USA lines →
  1. 7208.52.00.00 Of a thickness of 4.75 mm or more but not exceeding 10 mm Freekg

World trade in 2024

7208.52 · US$4.5bn

Trade value (US$) no reported trade < US$1.5mUS$1.5m+US$21.2m+US$140.5m+> US$234.1m

Exports: 110
  1. China: US$1.1bn
  2. Japan: US$391.6m
  3. Belgium: US$241m
  4. South Korea: US$234.1m
  5. Italy: US$230.1m
  6. Slovakia: US$216.2m
  7. United States: US$206.8m
  8. Netherlands: US$171.7m
  9. Austria: US$163.4m
  10. Germany: US$157.5m
  11. Türkiye: US$140.5m
  12. Sweden: US$110.2m
  13. North Macedonia: US$106.1m
  14. Spain: US$98m
  15. Finland: US$88.5m
  16. Poland: US$78.6m
  17. Denmark: US$73.4m
  18. Indonesia: US$67.7m
  19. Serbia: US$59m
  20. Czechia: US$49.1m
  21. India: US$48.4m
  22. Russia: US$44.3m
  23. Bulgaria: US$40.2m
  24. Canada: US$39.2m
  25. Romania: US$34.6m
  26. United Kingdom: US$28.3m
  27. Malaysia: US$26m
  28. Ukraine: US$21.2m
  29. Hungary: US$20.6m
  30. Singapore: US$20.5m
  31. Brazil: US$19m
  32. Portugal: US$18.9m
  33. France: US$18.7m
  34. Luxembourg: US$17.3m
  35. Taiwan: US$15.6m
  36. Kazakhstan: US$13.7m
  37. Australia: US$12.6m
  38. South Africa: US$12.3m
  39. Slovenia: US$11.1m
  40. Hong Kong SAR China: US$10.4m
  41. Latvia: US$7m
  42. Lithuania: US$5.5m
  43. El Salvador: US$5.2m
  44. Saudi Arabia: US$4.5m
  45. Ireland: US$3.7m
  46. Guatemala: US$3.4m
  47. Vietnam: US$3.4m
  48. Estonia: US$3.1m
  49. Thailand: US$3m
  50. United Arab Emirates: US$2.9m
  51. Greece: US$2.6m
  52. Switzerland: US$2.3m
  53. New Zealand: US$2.1m
  54. Egypt: US$1.8m
  55. Morocco: US$1.5m
  56. Senegal: US$1.4m
  57. Mexico: US$1.4m
  58. Croatia: US$1.2m
  59. Colombia: US$818.1k
  60. Kyrgyzstan: US$800.5k

Top exporters

RankCountryValueShare
1 China US$1.1bn 24.7%
2 Japan US$391.6m 8.6%
3 Belgium US$241m 5.3%
4 South Korea US$234.1m 5.2%
5 Italy US$230.1m 5.1%
6 Slovakia US$216.2m 4.8%
7 United States US$206.8m 4.6%
8 Netherlands US$171.7m 3.8%
9 Austria US$163.4m 3.6%
10 Germany US$157.5m 3.5%

Top importers

RankCountryValueShare
1 Germany US$405.1m 8.9%
2 Vietnam US$240.7m 5.3%
3 France US$224.4m 4.9%
4 Mexico US$190.7m 4.2%
5 Indonesia US$181.2m 4%
6 United Arab Emirates US$164m 3.6%
7 Poland US$159.8m 3.5%
8 Czechia US$150.6m 3.3%
9 Netherlands US$138.8m 3.1%
10 South Korea US$130.8m 2.9%

Questions and answers

What is the HS code for of a thickness of 4,75 mm or more but not exceeding 10 mm?

Of a thickness of 4,75 mm or more but not exceeding 10 mm fall under HS subheading 7208.52, part of heading 7208, in section XV of the Harmonized System.

What is the import duty on of a thickness of 4,75 mm or more but not… in the UK?

Under the UK Global Tariff, imports under 7208.52 from countries without a preferential agreement are charged at 0% to 50%, depending on the line. Preferential rates, anti-dumping duties and VAT are not included.

What is the import duty on of a thickness of 4,75 mm or more but not… in the EU?

Under the EU Combined Nomenclature, imports under 7208.52 from countries without a preferential agreement are free of duty. Preferential rates, anti-dumping duties and VAT are not included.

Which country exports the most of a thickness of 4,75 mm or more but not…?

China, with US$1.1bn in 2024 (24.7% of world exports).