8501.51: Of an output not exceeding 750 W

Duty rates compared

UK Free Third-country duty 9 tariff lines EU 2.7% Third-country duty 1 tariff line Türkiye 50% Statutory rate (Law 474) 2 tariff lines USA 2.5% – 3.3% General (MFN) 4 tariff lines · average 2.7%

The Turkish schedule prints the statutory rate set under Customs Law 474. The rate applied at import is laid down in the Import Regime Decision and can be lower, or different by country of origin.

1. 8501 51 00 00 Of an output not exceeding 750 w p/st
2. 8501 51 00 10 Of an output exceeding 735 w, for use in civil aircraft Freep/st
3. 8501 51 00 20 Of an output of less than 750 w, for use in certain types of aircraft Freep/st
4. 8501 51 00 25 Electric permanent magnet synchronous motor with:<br>-an output power of 550 w,<br>-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per gb/t 13560 standard) enclosed in polyethylene cover,<br>-an outer diameter of motor magnet shaft end with dimension of 10.001 mm or more but no more than 10.007 mm,<br>-terminals located across the radius 32.5 mm and separated by an angle of 21.8°,<br>-a motor housing made of adc12 or ac46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per jis h5302 or en1706 standard),<br>-a back electromotive force constant (ke) of 0.03306 v-sec/rad or more but no more than 0.03654 v-sec/rad,<br>-a back electromotive force harmonic order - 5th of no more than 0.38% (of fundamental) and 7th of no more than 0.25% (of fundamental),<br>-a cogging torque of no more than 13 mnm,<br>-a friction torque in ambient temperature of no more than 22 mnm,<br>-a maximum temperature of motor operation of no more than 200 °c<br> Freep/st
5. 8501 51 00 30 Ac synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,with:<br>- an output of 340w or more but not more than 7.4kw,<br>- a flange of dimensions of not more than 180mm × 180mm, and<br>- a length from flange to extreme end of resolver of not more than 271mm Freep/st
6. 8501 51 00 35 Electric permanent magnet synchronous motor with:<br>-an output power of 600 w,<br>-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron and dysprosium enclosed in aluminium cover,<br>-an outer diameter of motor magnet shaft end with dimension of 10.001 mm or more but no more than 10.007 mm,<br>-terminals located across the diameter 59.2 mm and separated by an angle 30.0°,<br>-a housing made of electrogalvanised steel (per jis g3313 grade sece standard) using a deep-drawing stamping process,<br>-a diameter of 88.600 mm or less but no less than 88.546 mm at the motor-system assembly interface,<br>-a back electromotive force constant (ke) of 0.03277 v-sec/rad or more but no more than 0.03623 v-sec/rad,<br>-a back electromotive force harmonic order - 5th of no more than 0.35% (of fundamental) and 7th of no more than 0.30% (of fundamental),<br>-a cogging torque of no more than 12 mnm,<br>-a friction torque in ambient temperature of no more than 23 mnm,<br>-a maximum temperature of motor operation of no more than 200 °c<br> Freep/st
7. 8501 51 00 40 Electric ac motor, three-phase, with:<br>-a rated power of 280 w or more but not more than 320 w,<br>-an output power of 480 w or more but not more than 540 w,<br>-an input power of 800 w or more but not more than 900 w,<br>-an external diameter of 150 mm or more but not more than 170 mm,<br>-a rated speed of 15 000 rpm or more but not more than 20 000 rpm,<br>-a weight of 6 kg or more but not more than 6.4 kg,<br>-a pulley and a tachometer,<br>for use in the manufacture of home appliance products Freep/st
8. 8501 51 00 45 Automotive-ready brushless permanently excited magnet synchronous alternating current motor with:<br>-a specified speed of not more than 7000 rpm,<br>-an output of 400 w or more but not more than 750 w (at 12 v),<br>-a flange diameter of 80 mm or more, but not more than 200 mm,<br>-a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end,<br>-a housing length of not more than 265 mm, measured from the flange to the outer end,<br>-a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with o-ring and protective grease or liquid seal interface),<br>-a stator with single t-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets,<br>-whether or not with electronic power steering controller,<br>-whether or not with pulley or coupling,<br>-whether or not with rotor position sensor<br> Freep/st
9. 8501 51 00 50 Three phase ac synchronous brushless permanent magnet motor with:<br>-an output of 500 w or more but not more than 700 w, <br>-an external diameter of 129.7 mm or more but not more than 180.3 mm, <br>-a rated speed of 16 000 rpm or more but not more than 17 000 rpm,<br>-a weight of 2.5 kg or more but not more than 3.1 kg, and<br>-with a pulley,<br>for use in the manufacture of home appliance products Freep/st
10. 8501 51 00 90 Other Freep/st

1. 8501 51 00 Of an output not exceeding 750 W 2.7%p/st

This line has no official text in this language; it is shown in the language of its tariff.

1. 8501.51 Çıkış gücü 750 W.ı geçmeyenler:
2. 8501.51.00.10.00 Sivil hava taşıtlarında kullanılmaya mahsus, Çıkış gücü 735 W.ı geçenler 50%Adet
3. 8501.51.00.90.00 Diğerleri 50%Adet

1. 8501.51 Of an output not exceeding 750 W:
2. 8501.51.20 Exceeding 37.5 W but not exceeding 74.6 W 2.5%
3. 8501.51.20.20 Gear motors No.
4. 8501.51.20.40 Other No.
5. 8501.51.40 Exceeding 74.6 W but not exceeding 735 W 2.5%
6. 8501.51.40.20 Gear motors No.
7. 8501.51.40.40 Other No.
8. 8501.51.50 Exceeding 735 W but under 746 W 3.3%
9. 8501.51.50.20 Gear motors No.
10. 8501.51.50.40 Other No.
11. 8501.51.60 Other 2.5%
12. 8501.51.60.20 Gear motors No.
13. 8501.51.60.40 Other No.

Special: reduced rates under trade agreements and preference programmes; the letters in brackets name the programmes (for example AU = Australia FTA, KR = Korea FTA).

World trade in 2024

Top exporters

Rank	Country	Value	Share
1	Germany	US$1.1bn	24.9%
2	China	US$698.1m	16.1%
3	Japan	US$501.1m	11.6%
4	France	US$258.4m	6%
5	Italy	US$212.1m	4.9%
6	Mexico	US$172.4m	4%
7	United States	US$155.5m	3.6%
8	Poland	US$139.7m	3.2%
9	Hungary	US$132.2m	3.1%
10	Austria	US$91.2m	2.1%

Top importers

Rank	Country	Value	Share
1	Germany	US$608.3m	14%
2	United States	US$549.3m	12.7%
3	China	US$398.6m	9.2%
4	Poland	US$207.7m	4.8%
5	Mexico	US$180.5m	4.2%
6	Italy	US$171.6m	4%
7	France	US$131.2m	3%
8	Netherlands	US$128m	3%
9	Japan	US$115.3m	2.7%
10	Austria	US$111.5m	2.6%

Questions and answers