8708.99: Other parts and accessories: other

Duty rates compared

UK 2% – 4% Third-country duty 15 tariff lines · average 2.3% EU 3% – 4.5% Third-country duty 3 tariff lines · average 3.7% Türkiye 30% – 70% Statutory rate (Law 474) 22 tariff lines · average 61.8% USA Free – 2.5% General (MFN) 13 tariff lines · average 0.8%

The Turkish schedule prints the statutory rate set under Customs Law 474. The rate applied at import is laid down in the Import Regime Decision and can be lower, or different by country of origin.

1. 8708 99 00 00 Other
2. 8708 99 10 00 For the industrial assembly of:<br>pedestrian-controlled tractors of subheading 8701 10;<br>vehicles of heading 8703;<br>vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm³ or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm³;<br>vehicles of heading 8705
3. 8708 99 10 55 Silicone or plastic keyboards, comprising:<br>-parts of common metal, and<br>-whether or not comprising parts of plastic,<br>-epoxy resin reinforced with fiberglass or wood,<br>-whether or not printed or surface-treated,<br>-with or without electrical conductors,<br>-with or without a membrane bonded to the keyboard,<br>-with or without mono or multilayer protective film<br> 2%
4. 8708 99 10 60 Aluminium engine bracket, with dimensions of:<br>-height of more than 10 mm but not more than 200 mm,<br>-width of more than 10 mm but not more than 250 mm,<br>-length of more than 10 mm but not more than 200 mm,<br>equipped with at least two fixing holes, made of aluminium alloys enac-46100 or enac-42100 (based on the norm en:1706) with following characteristics:<br>-internal porosity not more than 1 mm,<br>-outer porosity not more than 2 mm,<br>-rockwell hardness hrb 10 or more,<br>of a kind used in the production of suspensions systems for engines in motor vehicles
5. 8708 99 10 80 Specific pre-assembled or ready-to assemble sections for new mobile cranes
6. 8708 99 10 90 Other
7. Other
8. 8708 99 93 00 Of closed-die forged steel 4%
9. 8708 99 93 11 Specific pre-assembled or ready-to assemble sections for new mobile cranes 4%
10. 8708 99 93 90 Other 4%
11. 8708 99 97 00 Other 2%
12. 8708 99 97 22 Silicone or plastic keyboards, comprising:<br>-parts of common metal, and<br>-whether or not comprising parts of plastic,<br>-epoxy resin reinforced with fiberglass or wood,<br>-whether or not printed or surface-treated,<br>-with or without electrical conductors,<br>-with or without a membrane bonded to the keyboard,<br>-with or without mono or multilayer protective film<br> 2%
13. 8708 99 97 27 Inner pole electromagnet core used in magneto-rheological engine mounts to reduce shocks and for isolation and damping in passenger cars:<br>-of a powder metal assembly,<br>-with a diameter of not more than 90.95 mm,<br>-with an overall height of 24.5 mm,<br>-impregnated with sealant,<br>-zinc plated<br> 2%
14. 8708 99 97 43 Outer tie rod with a housing made of aisi 4137 (scm435) steel or en10083/2- c45r n steel or jis g4053-scm435 low alloy steel, with:<br>-a ball stud made of en 10263/4 - 41crs4 q t steel or aisi 4137 (scm435) steel or en10083/3-42crmos4q t steel or jis g4053-scm435 low alloy steel,<br>-a polyoxymethylene plastic ball seat,<br>-a distance between the end of the threaded hole and the centre of the ball stud of 124 mm or more but not more than 194 mm,<br>-a ball stud diameter of 21.98 mm or more but no more than 22 mm,<br>-a threaded hole depth of 40.5 mm or more but no more than 52 mm with dimensions m14x1.5,<br>-a boot seal,<br>-a boot seal protector and retaining ring,<br>-lubricant,<br>for use in the manufacture of vehicle's steering system 2%
15. 8708 99 97 50 Aluminium engine bracket, with dimensions of:<br>-height of more than 10 mm but not more than 200 mm,<br>-width of more than 10 mm but not more than 250 mm,<br>-length of more than 10 mm but not more than 200 mm,<br>equipped with at least two fixing holes, made of aluminium alloys enac-46100 or enac-42100 (based on the norm en:1706) with following characteristics:<br>-internal porosity not more than 1 mm,<br>-outer porosity not more than 2 mm,<br>-rockwell hardness hrb 10 or more,<br>of a kind used in the production of suspensions systems for engines in motor vehicles 2%
16. 8708 99 97 53 Roll rod assembly for the front suspension in vehicles for connecting the stabilizer to the suspension components:<br>-made of aluminum, rubber, and plastic,<br>-with a height of 270 mm or more, but not more than 300 mm,<br>-with a width of 50 mm or more, but not more than 65 mm,<br>-with a length of 150 mm or more, but not more than 170 mm,<br>for use in the manufacture of motor vehicles 2%
17. 8708 99 97 58 Mounting bracket of front radiator or intercooler:<br>-made of iron or steel or of plastics,<br>-whether or not with rubber cushioning,<br>for use in the manufacture of goods of heading 8708 2%
18. 8708 99 97 75 Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of chapter 87 2%
19. 8708 99 97 80 Specific pre-assembled or ready-to assemble sections for new mobile cranes 2%
20. 8708 99 97 90 Other 2%

1. 8708 99 Other:
2. 8708 99 10 For the industrial assembly of:

   Pedestrian-controlled tractors of subheading 870110;

   Vehicles of heading 8703;

   Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2500 cm³ or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2800 cm³;

   Vehicles of heading 8705

   3%—
3. Other:
4. 8708 99 93 Of closed-die forged steel 4.5%—
5. 8708 99 97 Other 3.5%—

This line has no official text in this language; it is shown in the language of its tariff.

1. 8708.99 Diğerleri:
2. Montaj sanayiinde kullanılanlar: 8701.10 Alt pozisyonundaki moto- kültörlere ait olanlar; 87. 03 pozisyonunda yer alan motorlu taşıtlara ait olanlar; silindir hacmi 2500 cm3.ü geçmeyen sıkıştırma ateşle- meli içten yanmalı pistonlu motorlu (dizel veya yarı dizel) veya silin- dir hacmi 2800 cm3.ü geçmeyen kıvılcım ateşlemeli içten yanmalı pistonlu motorlu 87.04 pozisyonundaki motorlu taşıtlara ait olanlar; 87.05 pozisyonundaki özel amaçlı motorlu taşıtlara ait olanlar:
3. 8708.99.10.11.00 8701.10 Alt posizyonundaki motokültörlere ait şasi aksamı 30%
4. 8708.99.10.12.00 Diğer şasi aksamı 50%
5. Diğerleri:
6. 8708.99.10.19.11 Motorsuz şasiler 70%
7. 8708.99.10.19.17 Rot, rotbaşı ve rotiller 70%
8. 8708.99.10.19.19 Diğerleri 70%
9. Diğerleri:
10. Kapalı kalıpta dövülmüş çelikten olanlar:
11. 87.01 Pozisyonundaki traktörlere ait olanlar:
12. 8708.99.93.11.00 Şasi aksamı 30%
13. Diğerleri:
14. 8708.99.93.19.11 Motorsuz şasiler 70%
15. 8708.99.93.19.17 Rot, rotbaşı ve rotiller 70%
16. 8708.99.93.19.19 Diğerleri 70%
17. Diğerleri:
18. 8708.99.93.91.00 Şasi aksamı 50%
19. Diğerleri:
20. 8708.99.93.99.11 Motorsuz şasiler 70%
21. 8708.99.93.99.17 Rot, rotbaşı ve rotiller 70%
22. 8708.99.93.99.19 Diğerleri 70%
23. Diğerleri:
24. 87.01 Pozisyonundaki traktörlere ait olanlar:
25. 8708.99.97.11.00 Şasi aksamı 30%
26. Diğerleri:
27. 8708.99.97.19.11 Motorsuz şasiler 70%
28. 8708.99.97.19.17 Rot, rotbaşı ve rotiller 70%
29. 8708.99.97.19.19 Diğerleri 70%
30. Diğerleri:
31. 8708.99.97.91.00 Şasi aksamı 50%
32. Diğerleri:
33. 8708.99.97.99.11 Motorsuz şasiler 70%
34. 8708.99.97.99.17 Rot, rotbaşı ve rotiller 70%
35. Diğerleri
36. 8708.99.97.99.21 Metal dökümden olanlar 70%
37. 8708.99.97.99.29 Diğerleri 70%

1. 8708.99 Other:
2. Parts of tractors suitable for agricultural use:
3. 8708.99.03.00 Vibration control goods containing rubber FreeNo.
4. 8708.99.06.00 Double flanged wheel hub units incorporating ball bearings FreeNo.
5. 8708.99.16.00 Other parts for power trains FreeNo.
6. 8708.99.23.00 Other FreeNo.
7. Parts of other tractors (except road tractors):
8. 8708.99.27.00 Vibration control goods containing rubber FreeNo.
9. 8708.99.31.00 Double flanged wheel hub units incorporating ball bearings FreeNo.
10. 8708.99.41.00 Other parts for power trains FreeNo.
11. 8708.99.48 Other Free
12. 8708.99.48.10 Tracklinks for track-laying tractors No., kg
13. 8708.99.48.50 Other No.
14. Other:
15. 8708.99.53.00 Of cast-iron Freekg
16. Other:
17. 8708.99.55.00 Vibration control goods containing rubber 2.5%No.
18. 8708.99.58.00 Double flanged wheel hub units incorporating ball bearings 2.5%No., kg
19. Other:
20. 8708.99.68 Other parts for power trains 2.5%
21. 8708.99.68.05 Drive shafts No.
22. 8708.99.68.10 Forged universal joints for vehicles of heading 8703 No.
23. 8708.99.68.20 Forged universal joints for vehicles of heading 8704 No.
24. 8708.99.68.90 Other No.
25. 8708.99.81 Other 2.5%
26. 8708.99.81.05 Brake hoses of plastics, with attached fittings No.
27. 8708.99.81.15 Double flanged wheel hub units not incorporating ball bearings No., kg
28. 8708.99.81.30 Slide-in campers No.
29. 8708.99.81.60 Cable traction devices kg
30. 8708.99.81.80 Other No.

Special: reduced rates under trade agreements and preference programmes; the letters in brackets name the programmes (for example AU = Australia FTA, KR = Korea FTA).

World trade in 2024

Top exporters

Rank	Country	Value	Share
1	United States	US$11.2bn	11%
2	Germany	US$10.4bn	10.2%
3	China	US$10bn	9.8%
4	Mexico	US$7.5bn	7.4%
5	South Korea	US$6.4bn	6.3%
6	Italy	US$4.7bn	4.6%
7	Spain	US$4.5bn	4.4%
8	Japan	US$4.4bn	4.4%
9	France	US$4.4bn	4.3%
10	Poland	US$4.1bn	4%

Top importers

Rank	Country	Value	Share
1	United States	US$18.5bn	18.2%
2	Germany	US$9bn	8.9%
3	Mexico	US$8bn	7.9%
4	France	US$6.1bn	6%
5	Canada	US$4.5bn	4.5%
6	Spain	US$4.2bn	4.1%
7	Italy	US$3.1bn	3.1%
8	Poland	US$2.7bn	2.6%
9	China	US$2.5bn	2.4%
10	United Kingdom	US$2.4bn	2.3%

Products classified here

• hand grip, mobility scooter
• rear chassis cover, mobility scooter
• tiller rear cover assembly, mobility scooter
• delta handlebar frame assembly, mobility scooter
• transaxle/motor/brake assembly, mobility scooter

Questions and answers