Kanada tollitariifistik (Customs Tariff)
Kanada tollitariifistik (Customs Tariff), grupp 72: Raud ja teras
- 550Kaubakoodid
- MaksuvabaMäär
Kanada tollitariifistikus on grupis 72 550 kaubakoodi 29 rubriigis.
Kõik grupi protsendimääraga koodid on tollimaksuvabad.
Kõige üksikasjalikumalt on jaotatud rubriik 7217, traat rauast või legeerimata terasest, milles on 82 kaubakoodi.
Kõige sagedasem määr on 0%; see kehtib 550 koodile.
7201 Toormalm ja peegelmalm kangide, plokkide või muude esmasvormidena
7202 Ferrosulamid
- 7202.11.00.00Containing by weight more than 2% of carbon
- 7202.19.00.00Ferro-manganese, other
- 7202.21.00.00Containing by weight more than 55% of silicon
- 7202.29.00.00Ferro-silicon, other
- 7202.30.00.00Ferro-silico-manganese
- 7202.41.00.00Containing by weight more than 4% of carbon Note: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies.
- 7202.49.00.00Other Note: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies.
- 7202.50.00.00Ferro-silico-chromium
- 7202.60.00.00Ferro-nickel
- 7202.70.00.00Ferro-molybdenum
- 7202.80.00.00Ferro-tungsten and ferro-silico-tungsten
- 7202.91.00.00Other, ferro-titanium and ferro-silico-titanium
- 7202.92.00.00Other, ferro-vanadium
- 7202.93.00.00Other, ferro-niobium
- 7202.99.00.00Other
7203 Rauamaagi jm käsnrauasaaduste otsesel redutseerimisel saadud raud, tükkidena, graanulitena vms kujul; raud minimaalse puhtusega 99,94 % massist, tükkidena, graanulitena vms kujul
7204 Malmi ja terase jäätmed ja jäägid; praagitud raua või terase valuplokid ümbersulatamiseks
- 7204.10.00.00Waste and scrap of cast iron
- 7204.21.00.00Waste and scrap of alloy steel: of stainless steel
- 7204.29.00.00Waste and scrap of alloy steel: other
- 7204.30.00.00Waste and scrap of tinned iron or steel
- 7204.41.00.10Turnings, shavings, chips, milling waste, sawdust, filings: no.1 in bundles
- 7204.41.00.20Other turnings and shavings
- 7204.41.00.90Turnings, shavings, chips, milling waste, sawdust, filings: other
- 7204.49.00.10No. 1 heavy melting
- 7204.49.00.20No. 2 heavy melting
- 7204.49.00.91Other waste and scrap: other, shredded
- 7204.49.00.99Other waste and scrap: other
- 7204.50.00.00Remelting scrap ingots
7205 Graanulid ja pulber toormalmist, peegelmalmist, rauast või terasest
7206 Raud ja legeerimata teras valuplokkidena või muude esmasvormidena (v.a rubriigi 7203 raud)
7207 Pooltooted rauast või legeerimata terasest
- 7207.11.00.10Of rectangular: of iron
- 7207.11.00.21Of rectangular: of non-alloy steel, billets
- 7207.11.00.29Of rectangular: of non-alloy steel, other
- 7207.12.00.00Other, of rectangular (other than square) cross-section
- 7207.19.00.10Containing by weight less than 0.25% of carbon: other, rounds
- 7207.19.00.90Containing by weight less than 0.25% of carbon: other
- 7207.20.00.10Containing by weight 0.25% or more of carbon: blooms
- 7207.20.00.20Containing by weight 0.25% or more of carbon: billets
- 7207.20.00.30Slabs, sheet bars or rounds
- 7207.20.00.90Containing by weight 0.25% or more of carbon: other
7208 Lehtvaltstooted rauast või legeerimata terasest, laiusega vähemalt 600 mm, kuumvaltsitud, plakeerimata, pindamata ja muul viisil katmata
- 7208.10.00.00In coils, not further worked than hot-rolled, with patterns in relief
- 7208.25.00.00Of a thickness of 4.75 mm or more
- 7208.26.00.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27.00.00Of a thickness of less than 3 mm
- 7208.36.00.00Of a thickness exceeding 10 mm
- 7208.37.00.10Of a width of 600 mm or more but not exceeding 1,525 mm
- 7208.37.00.20Of a width exceeding 1,525 mm but not exceeding 1,830 mm
- 7208.37.00.50Of a width exceeding 1,830 mm
- 7208.38.00.10Of a width of 600 mm or more but not exceeding 1,525 mm
- 7208.38.00.20Of a width exceeding 1,525 mm but not exceeding 1,830 mm
- 7208.38.00.50Of a width exceeding 1,830 mm
- 7208.39.00.00Of a thickness of less than 3 mm
- 7208.40.00.00Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.51.00.11Pressure vessel quality, vacuum-degassed
- 7208.51.00.12Pressure vessel quality, not vacuum-degassed
- 7208.51.00.19Of a thickness exceeding 10 mm: heat treated, other
- 7208.51.00.21Of a width less than 1,168.4 mm
- 7208.51.00.22Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.23Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.24Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.25Of a width exceeding 3,098.8 mm
- 7208.51.00.31Of a width less than 1,168.4 mm
- 7208.51.00.32Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.33Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.34Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.35Of a width exceeding 3,098.8 mm
- 7208.51.00.41Of a width less than 1,168.4 mm
- 7208.51.00.42Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.43Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.44Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.45Of a width exceeding 3,098.8 mm
- 7208.51.00.51Of a width less than 1,168.4 mm
- 7208.51.00.52Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.53Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.54Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.55Of a width exceeding 3,098.8 mm
- 7208.51.00.61Of a width less than 1,168.4 mm
- 7208.51.00.62Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.63Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.64Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.65Of a width exceeding 3,098.8 mm
- 7208.51.00.71Of a width less than 1,168.4 mm
- 7208.51.00.72Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.73Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.74Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.75Of a width exceeding 3,098.8 mm
- 7208.52.00.11Pressure vessel quality, vacuum-degassed
- 7208.52.00.12Pressure vessel quality, not vacuum-degassed
- 7208.52.00.19Of a thickness of 4.75 mm or more but not exceeding 10 mm: heat treated, other
- 7208.52.00.81Of a width less than 1,168.4 mm
- 7208.52.00.82Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.52.00.83Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.52.00.84Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.52.00.85Of a width exceeding 3,098.8 mm
- 7208.53.00.00Other, of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54.00.00Other, of a thickness of less than 3 mm
- 7208.90.00.00Other
7209 Lehtvaltstooted rauast või legeerimata terasest, laiusega vähemalt 600 mm, külmvaltsitud, plakeerimata, pindamata või muul viisil katmata
- 7209.15.00.00Of a thickness of 3 mm or more
- 7209.16.00.40Of a thickness exceeding 1 mm but less than 3 mm: annealed
- 7209.16.00.90Of a thickness exceeding 1 mm but less than 3 mm: other
- 7209.17.00.40Of a thickness of 0.5 mm or more but not exceeding 1 mm: annealed
- 7209.17.00.90Of a thickness of 0.5 mm or more but not exceeding 1 mm: other
- 7209.18.00.00Of a thickness of less than 0.5 mm
- 7209.25.00.00Of a thickness of 3 mm or more
- 7209.26.00.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.27.00.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.28.00.00Of a thickness of less than 0.5 mm
- 7209.90.00.00Other
7210 Lehtvaltstooted rauast ja legeerimata terasest, laiusega vähemalt 600 mm, plakeeritud, pinnatud või muul viisil kaetud
- 7210.11.00.00Of a thickness of 0.5 mm or more
- 7210.12.00.00Of a thickness of less than 0.5 mm
- 7210.20.00.00Plated or coated with lead, including terne-plate
- 7210.30.00.00Electrolytically plated or coated with zinc
- 7210.41.00.00Otherwise plated or coated with zinc: corrugated
- 7210.49.00.40Of a thickness less than 0.25 mm
- 7210.49.00.50Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7210.49.00.60Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7210.49.00.70Of a thickness exceeding 1 mm
- 7210.50.00.00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61.00.10Of a thickness of less than 1.44 mm
- 7210.61.00.20Of a thickness of 1.44 mm or more
- 7210.69.00.10Of a thickness of less than 1.44 mm
- 7210.69.00.20Of a thickness of 1.44 mm or more
- 7210.70.00.10Not plated or coated with metal and not clad
- 7210.70.00.21Plated or coated with zinc: electrolytically
- 7210.70.00.29Plated or coated with zinc: other
- 7210.70.00.90Painted, varnished or coated with plastics: other
- 7210.90.00.00Other
7211 Lehtvaltstooted rauast ja legeerimata terasest, laiusega alla 600 mm, plakeerimata, pindamata või muul viisil katmata
- 7211.13.00.00Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- 7211.14.00.10Other, of a thickness of 4.75 mm or more: not in coils
- 7211.14.00.90Other, of a thickness of 4.75 mm or more: other
- 7211.19.00.10Not further worked than hot-rolled: other, not in coils
- 7211.19.00.90Not further worked than hot-rolled: other
- 7211.23.00.00Containing by weight less than 0.25% of carbon
- 7211.29.00.00Not further worked than cold-rolled (cold-reduced): other
- 7211.90.00.00Other
7212 Lehtvaltstooted rauast või legeerimata terasest, laiusega alla 600 mm, plakeeritud, pinnatud või muul viisil kaetud
- 7212.10.00.00Plated or coated with tin
- 7212.20.00.10Of a thickness less than 0.25 mm
- 7212.20.00.20Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7212.20.00.30Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7212.20.00.40Of a thickness exceeding 1 mm
- 7212.30.00.10Of a thickness less than 0.25 mm
- 7212.30.00.20Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7212.30.00.30Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7212.30.00.40Of a thickness exceeding 1 mm
- 7212.40.00.10Not plated or coated with metal and not clad
- 7212.40.00.21Painted, varnished or coated with plastics: electrolytically
- 7212.40.00.29Painted, varnished or coated with plastics: other
- 7212.40.00.90Painted, varnished or coated with plastics: other
- 7212.50.00.30Of a thickness less than 0.25 mm
- 7212.50.00.40Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7212.50.00.50Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7212.50.00.60Of a thickness exceeding 1 mm
- 7212.60.00.00Clad
7213 Kuumvaltsitud varbmaterjal rauast või legeerimata terasest, korrapäratult kokku keritud
- 7213.10.00.11Of a diameter of 12 mm or less
- 7213.10.00.12Of a diameter of more than 12 mm but not exceeding 17 mm
- 7213.10.00.13Of a diameter exceeding 17 mm
- 7213.10.00.90Containing indentations, ribs, grooves or other: other
- 7213.20.00.50Containing by weight 0.1% or more of lead
- 7213.20.00.90Other, of free-cutting steel: other
- 7213.91.00.41Tire cord-quality steel wire rod, as defined in Statistical Note 2 to this Chapter
- 7213.91.00.42Of cold heading quality (CHQ) steel, as defined in Statistical Note 3 to this Chapter
- 7213.91.00.43Of welding quality wire rods, as defined in Statistical Note 4 to this Chapter
- 7213.91.00.49Of circular cross-section measuring less than 14: other
- 7213.91.00.50Other, containing by weight less than 0.25% of carbon
- 7213.91.00.60Other, containing by weight 0.25% or more but less than 0.6% of carbon
- 7213.91.00.70Other, containing by weight 0.6% or more of carbon
- 7213.99.00.11Of a diameter of 14 mm or more but less than 19 mm
- 7213.99.00.12Of a diameter of 19 mm or more but not exceeding 25.5 mm
- 7213.99.00.13Of a diameter exceeding 25.5 mm
- 7213.99.00.31Of a diameter of 14 mm or more but less than 19 mm
- 7213.99.00.32Of a diameter of 19 mm or more but not exceeding 25.5 mm
- 7213.99.00.33Of a diameter exceeding 25.5 mm
- 7213.99.00.51Of a diameter of 14 mm or more but less than 19 mm
- 7213.99.00.52Of a diameter of 19 mm or more but not exceeding 25.5 mm
- 7213.99.00.53Of a diameter exceeding 25.5 mm
- 7213.99.00.90Other
7214 Muu varbmaterjal rauast või legeerimata terasest, sepistatud, kuumvaltsitud, -tõmmatud või -pressitud (k.a valtsimisjärgselt väänatud vardad), edasi töötlemata
- 7214.10.00.00Forged
- 7214.20.00.11With a maximum yield point of 400MPa
- 7214.20.00.12With a minimum yield point greater than 400MPa but not exceeding 500MPa
- 7214.20.00.13With a minimum yield point greater than 500MPa but not exceeding 600MPa
- 7214.20.00.14With a minimum yield point greater than 600MPa
- 7214.20.00.21With a maximum yield point of 400MPa
- 7214.20.00.22With a minimum yield point greater than 400MPa but not exceeding 500MPa
- 7214.20.00.23With a minimum yield point greater than 500MPa but not exceeding 600MPa
- 7214.20.00.24With a minimum yield point greater than 600MPa
- 7214.20.00.31With a maximum yield point of 400MPa
- 7214.20.00.32With a minimum yield point greater than 400MPa but not exceeding 500MPa
- 7214.20.00.33With a minimum yield point greater than 500MPa but not exceeding 600MPa
- 7214.20.00.34With a minimum yield point greater than 600MPa
- 7214.20.00.90Containing indentations, ribs, grooves or other: other
- 7214.30.00.10Containing by weight 0.15% or more but not exceeding 0.35% of lead or 0.05% or more but not exceeding 0.4% of bismuth, for use in Canadian manufactures
- 7214.30.00.24Of a width not exceeding 76 mm
- 7214.30.00.25Of a width exceeding 76 mm but less than 152 mm
- 7214.30.00.26Of a width of 152 mm or more
- 7214.30.00.33Of a diameter not exceeding 76 mm
- 7214.30.00.34Of a diameter exceeding 76 mm
- 7214.30.00.40Other, of free-cutting steel: hexagons
- 7214.30.00.50Other, of free-cutting steel: squares
- 7214.30.00.90Other, of free-cutting steel: other
- 7214.91.00.11Of a width not exceeding 76 mm
- 7214.91.00.12Of a width exceeding 76 mm but less than 152 mm
- 7214.91.00.13Of a width of 152 mm or more
- 7214.91.00.21Of a width not exceeding 76 mm
- 7214.91.00.22Of a width exceeding 76 mm but less than 152 mm
- 7214.91.00.23Of a width of 152 mm or more
- 7214.91.00.31Of a width not exceeding 76 mm
- 7214.91.00.32Of a width exceeding 76 mm but less than 152 mm
- 7214.91.00.33Of a width of 152 mm or more
- 7214.99.00.20Other, hexagons
- 7214.99.00.30Other, squares
- 7214.99.00.41Rounds, of a diameter of less than 76 mm
- 7214.99.00.42Rounds, of a diameter of 76 mm or more but not exceeding 152 mm
- 7214.99.00.43Rounds, of a diameter exceeding 152 mm
- 7214.99.00.49Other
- 7214.99.00.51Rounds, of a diameter of less than 76 mm
- 7214.99.00.52Rounds, of a diameter of 76 mm or more but not exceeding 152 mm
- 7214.99.00.53Rounds, of a diameter exceeding 152 mm
- 7214.99.00.59Other
- 7214.99.00.60Other, containing by weight 0.6% or more of carbon
7215 Muu varbmaterjal rauast või legeerimata terasest
- 7215.10.00.20Of free-cutting steel, not further worked than cold-formed: rounds
- 7215.10.00.90Of free-cutting steel, not further worked than cold-formed: other
- 7215.50.00.10Other, not further worked than cold-formed or cold-finished: flat bars
- 7215.50.00.21Ground, turned or polished
- 7215.50.00.29Other, not further worked than cold-formed or cold-finished: rounds, other
- 7215.50.00.90Other, not further worked than cold-formed or cold-finished: other
- 7215.90.00.10Other, chrome plated
- 7215.90.00.20Corrosion resistant concrete reinforcing bars
- 7215.90.00.30Other concrete reinforcing bars
- 7215.90.00.90Other
7216 Kujuprofiilid rauast või legeerimata terasest
- 7216.10.00.11U, I or H sections, not further worked than hot-rolled: u sections, american standard
- 7216.10.00.19U, I or H sections, not further worked than hot-rolled: u sections, other
- 7216.10.00.21U, I or H sections, not further worked than hot-rolled: i sections, american standard
- 7216.10.00.29U, I or H sections, not further worked than hot-rolled: i sections, other
- 7216.10.00.30U, I or H sections, not further worked than hot-rolled: h sections
- 7216.21.00.10L or T sections, not further worked than hot-rolled: l sections, equal legs
- 7216.21.00.20L or T sections, not further worked than hot-rolled: l sections, unequal legs
- 7216.22.00.00L or T sections, not further worked than hot-rolled: t sections
- 7216.31.00.11Of a height of 80 mm or more but not exceeding 152.4 mm: american standard
- 7216.31.00.12Of a height of 80 mm or more but not exceeding 152.4 mm: for motor vehicles
- 7216.31.00.19Of a height of 80 mm or more but not exceeding 152.4 mm: other
- 7216.31.00.21Of a height exceeding 152.4 mm: american standard
- 7216.31.00.22Of a height exceeding 152.4 mm: for motor vehicles
- 7216.31.00.29Of a height exceeding 152.4 mm: other
- 7216.32.00.10Of a height of 80 mm or more but not exceeding 152.4 mm
- 7216.32.00.20Of a height exceeding 152.4 mm
- 7216.33.00.11Of a height not exceeding 150 mm
- 7216.33.00.12Of a height exceeding 150 mm but not exceeding 355 mm
- 7216.33.00.13Of a height exceeding 355 mm but not exceeding 635 mm
- 7216.33.00.14Of a height exceeding 635 mm
- 7216.33.00.20U, I or H sections, not further worked than hot-rolled: h sections, bearing pile
- 7216.33.00.91Of a height of 80 mm or more but not exceeding 152.4 mm
- 7216.33.00.92Of a height exceeding 152.4 mm
- 7216.40.00.11Of a height of 80 mm or more but not exceeding 152.4 mm
- 7216.40.00.12Of a height exceeding 152.4 mm
- 7216.40.00.21Large leg, of a height of 80 mm or more but not exceeding 152.4 mm
- 7216.40.00.22Large leg, of a height exceeding 152.4 mm
- 7216.40.00.30L or T sections, not further worked than hot-rolled: t sections
- 7216.50.00.10For use in ships, boats or floating structures
- 7216.50.00.20Shapes or sections, with bevelled edge or edges, of a length of more than 3.65 m and either of a width of more than 25.4 cm or of a thickness of more than 3.5 cm, for use in the manufacture of cutting edges for bulldozer or angledozer blades, front-end shovel loader buckets, combination excavating and transporting scrapers, road graders or road scrapers
- 7216.50.00.30Track shoe profile bars of steel, of a width of 190 mm or more but not exceeding 350 mm and of a height not exceeding 150 mm, for use in the manufacture of track shoes for track-laying machinery or vehicles
- 7216.50.00.90Other angles, shapes and sections, not further worked than: other
- 7216.61.00.00Obtained from flat-rolled products
- 7216.69.00.00Angles, shapes and sections, not further worked than: other
- 7216.91.00.10Cold-formed or cold-finished from flat-rolled products: l sections
- 7216.91.00.20I or H sections
- 7216.91.00.30Cold-formed or cold-finished from flat-rolled products: u sections
- 7216.91.00.91Cold-formed or cold-finished from flat-rolled products: other, ribbed shapes
- 7216.91.00.99Cold-formed or cold-finished from flat-rolled products: other
- 7216.99.00.10Other, l sections
- 7216.99.00.20I or H sections
- 7216.99.00.30Other, u sections
- 7216.99.00.91Other, ribbed shapes
- 7216.99.00.99Other
7217 Traat rauast või legeerimata terasest
- 7217.10.00.41Of a diameter of less than 1.5 mm, in coils weighing not more than 2 kg
- 7217.10.00.42Other, of a diameter of less than 1 mm
- 7217.10.00.43Other, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.44Other, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.45Other, of a diameter of 3 mm or more
- 7217.10.00.51Round, of a diameter of less than 1 mm
- 7217.10.00.52Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.53Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.54Round, of a diameter of 3 mm or more
- 7217.10.00.55Not plated or coated, whether or not polished: flat
- 7217.10.00.59Not plated or coated, whether or not polished: other
- 7217.10.00.61Heat treated, of a diameter of less than 1 mm
- 7217.10.00.62Heat treated, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.63Heat treated, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.64Heat treated, of a diameter of 3 mm or more
- 7217.10.00.65Other, of a diameter of less than 1 mm
- 7217.10.00.66Other, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.67Other, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.68Other, of a diameter of 3 mm or more
- 7217.10.00.71Not plated or coated, whether or not polished: flat
- 7217.10.00.79Not plated or coated, whether or not polished: other
- 7217.10.00.81Heat treated, of a diameter of less than 1 mm
- 7217.10.00.82Heat treated, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.83Heat treated, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.84Heat treated, of a diameter of 3 mm or more
- 7217.10.00.85Other, of a diameter of less than 1 mm
- 7217.10.00.86Other, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.87Other, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.88Other, of a diameter of 3 mm or more
- 7217.10.00.91Not plated or coated, whether or not polished: flat
- 7217.10.00.99Not plated or coated, whether or not polished: other
- 7217.20.00.10Plated or coated with zinc: flat
- 7217.20.00.41Round, of a diameter of less than 1 mm
- 7217.20.00.42Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.43Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.44Round, of a diameter of 3 mm or more
- 7217.20.00.49Plated or coated with zinc: other
- 7217.20.00.51Round, of a diameter of less than 1 mm
- 7217.20.00.52Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.53Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.54Round, of a diameter of 3 mm or more
- 7217.20.00.59Plated or coated with zinc: other
- 7217.20.00.61Round, of a diameter of less than 1 mm
- 7217.20.00.62Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.63Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.64Round, of a diameter of 3 mm or more
- 7217.20.00.69Plated or coated with zinc: other
- 7217.20.00.71Round, of a diameter of less than 1 mm
- 7217.20.00.72Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.73Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.74Round, of a diameter of 3 mm or more
- 7217.20.00.79Plated or coated with zinc: other
- 7217.20.00.81Round, of a diameter of less than 1 mm
- 7217.20.00.82Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.83Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.84Round, of a diameter of 3 mm or more
- 7217.20.00.89Plated or coated with zinc: other
- 7217.20.00.91Round, of a diameter of less than 1 mm
- 7217.20.00.92Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.93Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.94Round, of a diameter of 3 mm or more
- 7217.20.00.99Plated or coated with zinc: other
- 7217.30.00.10Plated or coated with other base metals: flat
- 7217.30.00.21Round, of a diameter of less than 1 mm
- 7217.30.00.22Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.30.00.23Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.30.00.24Round, of a diameter of 3 mm or more
- 7217.30.00.29Plated or coated with other base metals: other
- 7217.30.00.31Round, of a diameter of less than 1 mm
- 7217.30.00.32Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.30.00.33Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.30.00.34Round, of a diameter of 3 mm or more
- 7217.30.00.39Plated or coated with other base metals: other
- 7217.30.00.41Round, of a diameter of less than 1 mm
- 7217.30.00.42Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.30.00.43Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.30.00.44Round, of a diameter of 3 mm or more
- 7217.30.00.49Plated or coated with other base metals: other
- 7217.90.00.20Other, coated with plastics
- 7217.90.00.91Containing by weight less than 0.25% of carbon
- 7217.90.00.92Containing by weight 0.25% or more but less than 0.6% of carbon
- 7217.90.00.93Containing by weight 0.6% or more of carbon
7218 Roostevaba teras valuplokkidena või muude esmasvormidena; roostevabast terasest pooltooted
7219 Lehtvaltstooted roostevabast terasest, laiusega vähemalt 600 mm
- 7219.11.00.00Of a thickness exceeding 10 mm
- 7219.12.00.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13.00.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.00.00Of a thickness of less than 3 mm
- 7219.21.00.10Of a width of 600 mm or more but not exceeding 1,830 mm
- 7219.21.00.20Of a width exceeding 1,830 mm
- 7219.22.00.10Of a width of 600 mm or more but not exceeding 1,830 mm
- 7219.22.00.20Of a width exceeding 1,830 mm
- 7219.23.00.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.00.00Of a thickness of less than 3 mm
- 7219.31.00.00Of a thickness of 4.75 mm or more
- 7219.32.00.10Of a thickness of 3 mm or more but less than 4.75 mm: 300 Series
- 7219.32.00.90Of a thickness of 3 mm or more but less than 4.75 mm: other
- 7219.33.00.10Of a thickness exceeding 1 mm but less than 3 mm: 300 Series
- 7219.33.00.90Of a thickness exceeding 1 mm but less than 3 mm: other
- 7219.34.00.10Of a thickness of 0.5 mm or more but not exceeding 1 mm: 300 Series
- 7219.34.00.90Of a thickness of 0.5 mm or more but not exceeding 1 mm: other
- 7219.35.00.10Of a thickness of less than 0.5 mm: 300 Series
- 7219.35.00.90Of a thickness of less than 0.5 mm: other
- 7219.90.00.00Other
7220 Lehtvaltstooted roostevabast terasest, laiusega alla 600 mm
7221 Kuumvaltsitud varbmaterjal roostevabast terasest, korrapäratult kokku keritud
- 7221.00.00.30Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7221.00.00.40Bars and rods, hot-rolled, in irregularly wound coils: rounds, 300 series
- 7221.00.00.50Bars and rods, hot-rolled, in irregularly wound coils: other rounds
- 7221.00.00.60Bars and rods, hot-rolled, in irregularly wound coils: other wire rods
- 7221.00.00.90Bars and rods, hot-rolled, in irregularly wound coils: other
7222 Muu varbmaterjal roostevabast terasest; kujuprofiilid roostevabast terasest
- 7222.11.00.10Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7222.11.00.31Of a diameter of 25 mm or more
- 7222.11.00.32Of a diameter of less than 25 mm
- 7222.11.00.91Of a diameter of 25 mm or more
- 7222.11.00.92Of a diameter of less than 25 mm
- 7222.19.00.11High nickel alloy steel: flat bars
- 7222.19.00.19High nickel alloy steel: other
- 7222.19.00.21Bars and rods, not further worked than hot-rolled: other, flat bars
- 7222.19.00.29Bars and rods, not further worked than hot-rolled: other
- 7222.20.00.20Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7222.20.00.31Rounds, of a diameter of 25 mm or more
- 7222.20.00.32Rounds, of a diameter of less than 25 mm
- 7222.20.00.39Bars and rods, not further worked than cold-formed: other
- 7222.20.00.91Rounds, of a diameter of 25 mm or more
- 7222.20.00.92Rounds, of a diameter of less than 25 mm
- 7222.20.00.93Bars and rods, not further worked than cold-formed: other, flat bars
- 7222.20.00.99Bars and rods, not further worked than cold-formed: other
- 7222.30.00.20Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7222.30.00.30Other, of high nickel alloy steel
- 7222.30.00.90Other bars and rods: other
- 7222.40.00.10Profile wire, cold drawn or cold drawn and annealed, up to 0.787 mm² in maximum solid cross-sectional area
- 7222.40.00.20Angles, shapes and sections: other wire
- 7222.40.00.90Angles, shapes and sections: other
7223 Roostevabast terasest traat
- 7223.00.00.30Profile wire, cold drawn or cold drawn and annealed, up to 0.787 mm² in maximum solid cross-sectional area
- 7223.00.00.41Other, coated or covered: round spring
- 7223.00.00.42Other, coated or covered: other round
- 7223.00.00.49Other, coated or covered: other
- 7223.00.00.51Wire of stainless steel: other round, spring
- 7223.00.00.52Other, of a diameter of less than 0.25 mm
- 7223.00.00.53Other, of a diameter of 0.25 mm or more but less than 0.76 mm
- 7223.00.00.54Other, of a diameter of 0.76 mm or more but less than 1.52 mm
- 7223.00.00.55Other, of a diameter of 1.52 mm or more but less than 5.1 mm
- 7223.00.00.56Other, of a diameter of 5.1 mm or more but less than 6.5 mm
- 7223.00.00.57Other, of a diameter of 6.5 mm or more
- 7223.00.00.90Wire of stainless steel: other
7224 Muu legeerteras valuplokkidena vm esmasvormidena; muust legeerterasest pooltooted
7225 Lehtvaltstooted muust legeerterasest, laiusega vähemalt 600 mm
- 7225.11.00.00Of silicon-electrical steel, grain-oriented
- 7225.19.00.00Of silicon-electrical steel, other
- 7225.30.00.00Other, not further worked than hot-rolled, in coils
- 7225.40.00.10Other, not further worked than hot-rolled, not in coils: heat treated
- 7225.40.00.20Other, of a width of 600 mm or more but not exceeding 1,525 mm
- 7225.40.00.30Other, of a width exceeding 1,525 mm but not exceeding 1,830 mm
- 7225.40.00.40Other, of a width exceeding 1,830 mm but not exceeding 2,450 mm
- 7225.40.00.50Other, of a width exceeding 2,450 mm
- 7225.50.00.10Of a thickness of less than 0.5 mm
- 7225.50.00.20Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7225.50.00.30Of a thickness exceeding 1 mm but less than 3 mm
- 7225.50.00.40Of a thickness of 3 mm or more
- 7225.91.00.10Of a thickness of less than 0.25 mm
- 7225.91.00.20Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7225.91.00.30Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7225.91.00.40Of a thickness exceeding 1 mm
- 7225.92.00.10Of a thickness less than 0.25 mm
- 7225.92.00.20Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7225.92.00.30Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7225.92.00.40Of a thickness exceeding 1 mm
- 7225.99.00.20Plated or coated with aluminum or aluminum alloys
- 7225.99.00.90Other
7226 Lehtvaltstooted muust legeerterasest, laiusega alla 600 mm
- 7226.11.00.00Of silicon-electrical steel, grain-oriented
- 7226.19.00.00Of silicon-electrical steel, other
- 7226.20.00.00Of high speed steel
- 7226.91.00.00Not further worked than hot-rolled
- 7226.92.00.00Not further worked than cold-rolled (cold-reduced)
- 7226.99.00.11Of a thickness of less than 0.25 mm
- 7226.99.00.12Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7226.99.00.13Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7226.99.00.19Of a thickness exceeding 1 mm
- 7226.99.00.91Of a thickness of less than 0.25 mm
- 7226.99.00.92Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7226.99.00.93Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7226.99.00.99Of a thickness exceeding 1 mm
7227 Kuumvaltsitud varbmaterjal muust legeerterasest, korrapäratult kokku keritud
- 7227.10.00.00Of high speed steel
- 7227.20.00.20Of welding quality wire rods, as defined in statistical note 4 to this chapter
- 7227.20.00.90Of silico-manganese steel, other
- 7227.90.00.11Other, of ball-bearing steel
- 7227.90.00.19Other
- 7227.90.00.21Other, of ball-bearing steel
- 7227.90.00.29Other
- 7227.90.00.50Other, containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7227.90.00.60Other, of cold heading quality (CHQ) steel, as defined in Statistical Note 3 to this Chapter
- 7227.90.00.70Other, of welding quality wire rods, as defined in Statistical Note 4 to this Chapter
- 7227.90.00.81Of a diameter of less than 14 mm
- 7227.90.00.82Of a diameter of 14 mm or more but not exceeding 19 mm
- 7227.90.00.83Of a diameter of 19 mm or more
- 7227.90.00.90Other
7228 Muust legeerterasest varbmaterjal; muust legeerterasest kujuprofiilid; legeeritud või legeerimata terasest puurtorud
- 7228.10.00.10Bars and rods, of high speed steel: cold-formed
- 7228.10.00.20Bars and rods, of high speed steel: not cold-formed
- 7228.20.00.40Bars and rods, of silico-manganese steel: cold-formed
- 7228.20.00.50Bars and rods, of silico-manganese steel: not cold-formed
- 7228.30.00.41Of ball bearing steel
- 7228.30.00.42Of chipper knife steel, not cold-formed
- 7228.30.00.49Of tool steel (other than high-speed steel): other
- 7228.30.00.51With a diameter of 12 mm or less
- 7228.30.00.52With a diameter of more than 12 mm but not exceeding 39 mm
- 7228.30.00.53With a diameter exceeding 39 mm
- 7228.30.00.60Other, of high-nickel alloy steel
- 7228.30.00.71With a diameter of less than 76 mm
- 7228.30.00.72With a diameter of 76 mm or more but not exceeding 152 mm
- 7228.30.00.73With a diameter of 152 mm or more but not exceeding 228 mm
- 7228.30.00.74With a diameter exceeding 228 mm
- 7228.30.00.81With a minimum cross section less than 152mm
- 7228.30.00.82With a maximum cross section of 152mm or more
- 7228.30.00.90Other bars and rods, not further worked than hot-rolled: other
- 7228.40.00.10Other bars and rods, not further worked than forged: mold steel
- 7228.40.00.20Other bars and rods, not further worked than forged: tool steel
- 7228.40.00.90Other bars and rods, not further worked than forged: other
- 7228.50.00.10Other bars and rods, not further worked than cold-formed: mold steel
- 7228.50.00.20Other bars and rods, not further worked than cold-formed: tool steel
- 7228.50.00.90Other bars and rods, not further worked than cold-formed: other
- 7228.60.00.00Other bars and rods
- 7228.70.00.11L sections, not further worked than hot-rolled: equal legs
- 7228.70.00.12L sections, not further worked than hot-rolled: unequal legs
- 7228.70.00.21Of a height not exceeding 150 mm
- 7228.70.00.22Of a height exceeding 150 mm
- 7228.70.00.30Other H sections, not further worked than hot-rolled, cold-rolled, drawn or extruded
- 7228.70.00.41American standard, of a height not exceeding 150 mm
- 7228.70.00.42American standard, of a height exceeding 150 mm
- 7228.70.00.49I sections, not further worked than hot-rolled: other
- 7228.70.00.50U sections, not further worked than hot-rolled, cold-rolled, drawn or extruded
- 7228.70.00.60T sections, not further worked than hot-rolled, cold-rolled, drawn or extruded
- 7228.70.00.70Z sections, not further worked than hot-rolled, cold-rolled, drawn or extruded
- 7228.70.00.81Other shapes or sections, not further worked than: bearing pile
- 7228.70.00.82Curved grader blade sections
- 7228.70.00.83Track shoe profile bars of steel, of a width of 190 mm or more but not exceeding 350 mm and of a height not exceeding 150 mm, for use in the manufacture of track shoes for track-laying machinery or vehicles
- 7228.70.00.89Other shapes or sections, not further worked than: other
- 7228.70.00.91Angles, shapes and sections: other, l sections
- 7228.70.00.92H or I sections
- 7228.70.00.93Angles, shapes and sections: other, u sections
- 7228.70.00.99Angles, shapes and sections: other
- 7228.80.00.11Not further worked than hot-rolled: round, alloy steel
- 7228.80.00.12Not further worked than hot-rolled: round, non-alloy steel
- 7228.80.00.18Not further worked than hot-rolled: other, alloy steel
- 7228.80.00.19Not further worked than hot-rolled: other
- 7228.80.00.91Hollow drill bars and rods: other, round, alloy steel
- 7228.80.00.92Hollow drill bars and rods: other, round, non-alloy steel
- 7228.80.00.98Hollow drill bars and rods: other, alloy steel
- 7228.80.00.99Hollow drill bars and rods: other
7229 Legeerterasest traat
- 7229.20.00.11Plated or coated with copper
- 7229.20.00.19Of silico-manganese steel, other
- 7229.20.00.90Of silico-manganese steel, other
- 7229.90.00.30Other, of high-speed steel
- 7229.90.00.40Other, other flat
- 7229.90.00.51Plated or coated with copper
- 7229.90.00.59Other
- 7229.90.00.61Of a diameter of less than 1 mm
- 7229.90.00.62Of a diameter of 1 mm or more but less than 1.5 mm
- 7229.90.00.63Of a diameter of 1.5 mm or more but less than 3 mm
- 7229.90.00.64Of a diameter of 3 mm or more
- 7229.90.00.71Of a diameter of less than 1 mm
- 7229.90.00.72Of a diameter of 1 mm or more but less than 1.5 mm
- 7229.90.00.73Of a diameter of 1.5 mm or more but less than 3 mm
- 7229.90.00.74Of a diameter of 3 mm or more
- 7229.90.00.90Other