Jungtinės Karalystės pasaulinis tarifas · prekės kodas · HS 8708.50
8708 50 55 91: Varantieji tiltai ir ašys, jų dalys: Specific pre-assembled or ready-to assemble sections for new mobile cranes
Varantieji tiltai ir ašys, jų dalys
✓ Galima naudoti muitinės deklaracijoje Duomenys: Jungtinės Karalystės pasaulinis tarifas · patikrinta 2026 m. spalio 24 d.
Šios eilutės oficialaus teksto lietuvių kalba nėra; ji rodoma jos tarifo kalba.
- 8708 Parts and accessories of the motor vehicles of headings 8701 to 8705
- 8708 50 00 00 Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof
- Other
- Parts
- 8708 50 55 00 Of closed-die forged steel
- Other
- 8708 50 55 91 Specific pre-assembled or ready-to assemble sections for new mobile cranes
Kiek mokėsite
Importas: JK
Papildomi muitai ir importo reikalavimai
Mokesčiai, imami be muito, ir reikalavimai, kuriuos prekės turi atitikti pasienyje.
Papildomi muitai ir mokesčiai 1
- Papildomas muitasPapildomi muitai 35 %
- Taikoma kilmės šalims
- Baltarusija, Rusija
- Teisės aktas
- 2022 No. 598
- Dokumentai
- 9014
Importo reikalavimai 5
- Draudimas arba apribojimasImporto draudimas
- Taikoma kilmės šalims
- Šiaurės Korėja
- Teisės aktas
- S.I. 2019/411
- Importo kontrolėIšleidimo į laisvą apyvartą ribojimas
- Taikoma kilmės šalims
- Baltarusija, Irakas, Rusija, Sirija, Ukraina
- Teisės aktas
- 2022 No. 748, S.I. 2020/707, S.I. 2019/792, S.I. 2022/395
- Dokumentai
- 9024
- 9032
- 9025
- 9009
- 9010
- 9017
- Importo kontrolėIšleidimo į laisvą apyvartą ribojimas
- Taikoma kilmės šalims
- visos šalys
- Teisės aktas
- S.I. 2019/583
- Dokumentai
- L100 Komisijos išduota importo licencija „kontroliuojamosios medžiagos“ (ozonas)
- Y902
- 9Y06
- Importo kontrolėApribotų prekių ir technologijų importo kontrolė
- Taikoma kilmės šalims
- Iranas, Libija, Rusija
- Teisės aktas
- S.I. 2019/461, 2020 No. 1665, S.I. 2019/855
- Importo kontrolėPrabangos prekių importo draudimas
- Taikoma kilmės šalims
- Šiaurės Korėja
- Teisės aktas
- S.I. 2019/411
- Dokumentai
- Y945 Keleivių asmeniniai daiktai arba nekomercinio pobūdžio prekės, skirtos keleivių asmeniniam naudojimui ir esančios jų bagaže (Reglamento (ES) 2017/1509 10 straipsnio 2 dalis)
- Y946 Prekės, būtinos valstybių narių diplomatinių ar konsulinių atstovybių KLDR arba tarptautinių organizacijų, turinčių imunitetus pagal tarptautinę teisę, oficialiems tikslams, taip pat tų atstovybių ar organizacijų darbuotojų asmeniniai daiktai (Reglamento (ES) 2017/1509 10 straipsnio 3 dalis)
- Y948 Prekės, neaprašytos Reglamento (ES) 2017/1509 VIII priede (Prabangos prekės)
Lengvatinės normos pagal šalis
| Susitarimas arba lengvatų sistema | Šalys | Norma |
|---|---|---|
| standartinė norma (be susitarimo) | — | 4 % |
| DCTS Comprehensive | Afganistanas, Angola, Bangladešas, Beninas ir dar 38Afganistanas, Angola, Bangladešas, Beninas, Bisau Gvinėja, Burkina Fasas, Burundis, Butanas, Centrinės Afrikos Respublika, Čadas, Džibutis, Eritrėja, Etiopija, Gambija, Gvinėja, Haitis, Jemenas, Kambodža, Kiribatis, Komorai, Kongas-Kinšasa, Laosas, Liberija, Malavis, Malis, Mauritanija, Mianmaras (Birma), Nepalas, Nigeris, Pietų Sudanas, Rytų Timoras, Ruanda, San Tomė ir Prinsipė, Senegalas, Siera Leonė, Somalis, Sudanas, Tanzanija, Togas, Tuvalu, Uganda, Zambija | Be muito |
| Europos Sąjunga (įskaitant kodą "EU") | Airija, Austrija, Belgija, Bulgarija ir dar 23Airija, Austrija, Belgija, Bulgarija, Čekija, Danija, Estija, Graikija, Ispanija, Italija, Kipras, Kroatija, Latvija, Lenkija, Lietuva, Liuksemburgas, Malta, Nyderlandai, Portugalija, Prancūzija, Rumunija, Slovakija, Slovėnija, Suomija, Švedija, Vengrija, Vokietija | Be muito |
| DCTS Enhanced | Alžyras, Bolivija, Filipinai, Kirgizija ir dar 13Alžyras, Bolivija, Filipinai, Kirgizija, Kongas-Brazavilis, Kuko Salos, Mikronezija, Mongolija, Nigerija, Niujė, Pakistanas, Sirija, Šri Lanka, Tadžikija, Uzbekistanas, Vanuatu, Žaliasis Kyšulys | Be muito |
| CARIFORUM | Antigva ir Barbuda, Bahamos, Barbadosas, Belizas ir dar 10Antigva ir Barbuda, Bahamos, Barbadosas, Belizas, Dominika, Dominikos Respublika, Gajana, Grenada, Jamaika, Sent Kitsas ir Nevis, Sent Lusija, Surinamas, Šventasis Vincentas ir Grenadinai, Trinidadas ir Tobagas | Be muito |
| UŠT (Užjūrio šalys ir teritorijos) | Angilija, Bermuda, Didžiosios Britanijos Mergelių Salos, Folklando salos ir dar 7Angilija, Bermuda, Didžiosios Britanijos Mergelių Salos, Folklando salos, Indijos Vandenyno Britų Sritis, Kaimanų Salos, Montseratas, Pietų Džordžija ir Pietų Sandvičo salos, Pitkerno salos, Šv. Elenos Sala, Terkso ir Kaikoso Salos | Be muito |
| Centrinė Amerika | Gvatemala, Hondūras, Kosta Rika, Nikaragva, Panama, Salvadoras | Be muito |
| SADC EPA | Botsvana, Lesotas, Mozambikas, Namibija, Svazilandas | Be muito |
| Rytų ir Pietų Afrikos valstybės | Madagaskaras, Mauricijus, Seišeliai, Zimbabvė | Be muito |
| CPTPP | Brunėjus, Malaizija | Be muito |
| susitarimas JK–Andora | Andora | Be muito |
| susitarimas JK–Albanija | Albanija | Be muito |
| susitarimas JK–Australija | Australija | Be muito |
| susitarimas JK–Kanada | Kanada | Be muito |
| susitarimas JK–Šveicarija | Šveicarija | Be muito |
| susitarimas JK–Dramblio Kaulo Krantas | Dramblio Kaulo Krantas | Be muito |
| susitarimas JK–Čilė | Čilė | Be muito |
| susitarimas JK–Kamerūnas | Kamerūnas | Be muito |
| susitarimas JK–Kolumbija | Kolumbija | Be muito |
| susitarimas JK–Seuta ir Melila | Seuta ir Melila | Be muito |
| susitarimas JK–Ekvadoras | Ekvadoras | Be muito |
| susitarimas JK–Egiptas | Egiptas | Be muito |
| susitarimas JK–Fidžis | Fidžis | Be muito |
| susitarimas JK–Farerų Salos | Farerų Salos | Be muito |
| susitarimas JK–Gruzija | Gruzija | Be muito |
| susitarimas JK–Gana | Gana | Be muito |
| DCTS Standard | Indonezija | Be muito |
| susitarimas JK–Izraelis | Izraelis | Be muito |
| susitarimas JK–Indija | Indija | Be muito |
| susitarimas JK–Islandija | Islandija | Be muito |
| susitarimas JK–Jordanija | Jordanija | Be muito |
| susitarimas JK–Japonija | Japonija | Be muito |
| susitarimas JK–Kenija | Kenija | Be muito |
| susitarimas JK–Pietų Korėja | Pietų Korėja | Be muito |
| susitarimas JK–Libanas | Libanas | Be muito |
| susitarimas JK–Lichtenšteinas | Lichtenšteinas | Be muito |
| susitarimas JK–Marokas | Marokas | Be muito |
| susitarimas JK–Moldova | Moldova | Be muito |
| susitarimas JK–Šiaurės Makedonija | Šiaurės Makedonija | Be muito |
| susitarimas JK–Meksika | Meksika | Be muito |
| susitarimas JK–Norvegija | Norvegija | Be muito |
| susitarimas JK–Naujoji Zelandija | Naujoji Zelandija | Be muito |
| susitarimas JK–Peru | Peru | Be muito |
| susitarimas JK–Papua Naujoji Gvinėja | Papua Naujoji Gvinėja | Be muito |
| susitarimas JK–Palestinos teritorija | Palestinos teritorija | Be muito |
| susitarimas JK–Serbija | Serbija | Be muito |
| susitarimas JK–Saliamono Salos | Saliamono Salos | Be muito |
| susitarimas JK–Singapūras | Singapūras | Be muito |
| susitarimas JK–San Marinas | San Marinas | Be muito |
| susitarimas JK–Tunisas | Tunisas | Be muito |
| susitarimas JK–Turkija | Turkija | Be muito |
| susitarimas JK–Ukraina | Ukraina | Be muito |
| susitarimas JK–Vietnamas | Vietnamas | Be muito |
| susitarimas JK–Samoa | Samoa | Be muito |
| susitarimas JK–Kosovas | Kosovas | Be muito |
| susitarimas JK–Pietų Afrika | Pietų Afrika | Be muito |
Išnašos
TN200 The export of these items may be controlled under the Export Control Order 2008 as amended…
TN207 The Democratic People’s Republic of Korea (Sanctions) (EU Exit) Regulations 2019 impose tr…
TN701 According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9), as retained in UK La…
The prohibition shall not apply in respect of:
(a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established.
(b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014, as retained in UK Law, or in accordance with the EU-Ukraine Association Agreement
JK: mėnesinis importas · HS 8708.50
Pagrindiniai tiekėjai, paskutiniai 12 mėnesių
| Šalis | Vertė | Dalis | Pokytis |
|---|---|---|---|
| 249,2 mln. GBP | 28,3 % | +26,9 % | |
| 101,5 mln. GBP | 11,5 % | −9,6 % | |
| 98,2 mln. GBP | 11,1 % | +9,7 % | |
| 76,2 mln. GBP | 8,6 % | −13,8 % | |
| 72,3 mln. GBP | 8,2 % | +14,3 % | |
| 57,7 mln. GBP | 6,5 % | +32,6 % | |
| 50 mln. GBP | 5,7 % | +23 % | |
| 36,1 mln. GBP | 4,1 % | +36,2 % |
Ta pati subpozicija kituose tarifuose
JK: tarifinės eilutės: 8708.50
- 8708 50 20 15Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened
- 8708 50 20 18Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1.4 m or more but not more than 2.4 m, for use in the production of goods of chapter 87
- 8708 50 20 20Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
- 8708 50 20 25Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%, -forged, turned, milled and hardened
- 8708 50 20 35Inboard constant velocity joint tripod housing, with: -an outer diameter of 67.0 mm or more but not more than 99.0 mm, -3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
- 8708 50 20 50Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 20 55Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm, -forged, turned, broached and hardened
- 8708 50 20 70Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67.0 mm or more but not more than 84.5 mm, -3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm, - sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves
- 8708 50 20 75Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13.0mm or more but not more than 28.0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
- 8708 50 20 80Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 20 90For the industrial assembly of: other
- 8708 50 35 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 35 90Drive-axles with differential, whether or not provided with: other
- 8708 50 55 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 55 20Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 55 50Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened
- 8708 50 55 91Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 55 99Of closed-die forged steel: other
- 8708 50 91 10Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 91 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 91 90Drive-axles with differential, whether or not provided with: other, parts, other, for non-driving axles, other
- 8708 50 99 10Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
- 8708 50 99 25Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67.0 mm or more but not more than 84.5 mm, -3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm, - sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves
- 8708 50 99 35Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13.0mm or more but not more than 28.0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
- 8708 50 99 40Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 99 45Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%, -forged, turned, milled and hardened
- 8708 50 99 50Inboard constant velocity joint tripod housing, with: -an outer diameter of 67.0 mm or more but not more than 99.0 mm, -3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
- 8708 50 99 60Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm, -forged, turned, broached and hardened
- 8708 50 99 70Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 99 90Drive-axles with differential, whether or not provided with: other, parts, other
Privalomi sprendimai dėl panašių prekių
JAV muitinės (CBP, CROSS) ir JK HMRC (Advance Tariff Rulings) sprendimai dėl čia klasifikuojamų prekių. Sprendimas privalomas tik jo turėtojui, tačiau rodo, kaip institucijos klasifikuoja panašias prekes. Aprašymai yra institucijų tekstai anglų kalba.
- N364933 U.S. CBP
The tariff classification of an automotive shim from South Korea
- N344019 U.S. CBP
The tariff classification of power train flanges from Japan
- N342419 U.S. CBP
The tariff classification of differential components from China
- N336861 U.S. CBP
The tariff classification and country of origin of half-shafts
- 600015867 HMRC
This is a third generation double angular contact flanged bearing used on the non-driving axles of motor vehicles. It contains an outer ring, inner ring, inner shaft, 22-28 steel balls, retainer, pulsar ring and seal. These are all separate finished products that are third generation double…
- 600016887 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
- 600016888 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
- 600015859 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
iš viso sprendimų dėl šio kodo: 13
Teisinės pastabos
Subpozicijų pastaba
1. 870822 subpozicijai priskiriami:
a) priekiniai stiklai, galiniai ir kiti stiklai, su rėmais; ir
b) priekiniai stiklai, galiniai ir kiti stiklai, su rėmais arba be jų, su šildymo arba kitais elektros ar elektroniniais įrenginiais,
kai jie tinkami vien tik arba daugiausia 8701–8705 pozicijoms priskiriamoms autotransporto priemonėms.
Prekės kodas 8708 50 55 91 – tai Jungtinės Karalystės pasaulinio tarifo tarifinė eilutė, priklausanti HS subpozicijai 8708.50 (varančiosios ašys su diferencialu ir su kitomis transmisijos detalėmis arba be…).
Trečiųjų šalių muito norma yra 4 %.
Dėl prekybos susitarimų ir lengvatų sistemų (pvz., DCTS Comprehensive ir Europos Sąjunga) 174 šalių kilmės prekėms Jungtinėje Karalystėje muitas netaikomas; standartinė norma – 4 %.
Į Jungtinę Karalystę importuojamoms prekėms, kurių kilmės šalys: Baltarusija ir Rusija, papildomai taikomas papildomas muitas – 35 %.
HS subpozicijos 8708.50 – varantieji tiltai ir ašys, jų dalys – prekių importas į Jungtinę Karalystę (2025 m. rugsėjis – 2026 m. rugpjūtis): 881,9 mln. GBP – 5 % daugiau nei per ankstesnius 12 mėnesių; didžiausias tiekėjas – Italija (28 %), antras – Vokietija.
Tos pačios HS subpozicijos normos kituose tarifuose: ES 3 %–4,5 %, Turkija 3 %–4,5 %, JAV 0 %–2,5 %, Kanada 0 %–6 %, Meksika 0 %–25 %, Brazilija 7,2 %–18 %, Argentina 0 %–18 %, Peru be muito, Naujoji Zelandija 0 %–5 %, Japonija be muito, Taivanas 2,5 %–15 %, GCC 5 %, Šveicarija be muito, Norvegija be muito, Šiaurės Makedonija 0 %–15 % ir Nigerija 10 %.
2024 m. Jungtinė Karalystė importavo HS subpozicijos 8708.50 prekių už 1,1 mlrd. USD; didžiausias tiekėjas – Italija.
Klausimai ir atsakymai
Koks importo muitas kodui 8708 50 55 91 Jungtinėje Karalystėje?
Jungtinės Karalystės pasauliniame tarife trečiųjų šalių muito norma yra 4 %. Lengvatinės normos prekėms iš susitarimų šalių, antidempingo muitai ir PVM neįtraukti.
Iš kurių šalių Jungtinė Karalystė importuoja šias prekes?
Visoje 8708.50 subpozicijoje 2024 m. didžiausias tiekėjas buvo Italija (242 mln. USD), antroje vietoje – Belgija.
Kurioms šalims kodui 8708 50 55 91 taikoma mažesnė muito norma?
Šiai eilutei lengvatinė norma taikoma 174 šalių kilmės prekėms, iš jų 174 šalių – nulinė (lengvatų pagrindas, be kita ko: DCTS Comprehensive, Europos Sąjunga, DCTS Enhanced). Ji taikoma tik prekėms, atitinkančioms susitarimo kilmės taisykles ir turinčioms kilmės įrodymą. Konkrečios šalies normą pamatysite šiame puslapyje pasirinkę kilmės šalį.
Ar kodui 8708 50 55 91 taikomi antidempingo ar kiti papildomi muitai?
Papildomas muitas – 35 % prekėms, kurių kilmės šalys: Baltarusija ir Rusija. Šie muitai mokami kartu su įprastu muitu.