Subheading · Section XV

7226.91: Not further worked than hot-rolled

7226.91
  • 50%UK
  • FreeEU
  • 30%Türkiye
  • FreeUSA
  • US$829.4mWorld trade in 2024

7226.91 is a six-digit subheading of heading 7226, flat-rolled products of other alloy steel, of a width of less than 600 mm, chapter 72.

In the UK Global Tariff, subheading 7226.91 covers 4 tariff lines and the duty is 50%.

The EU Combined Nomenclature divides subheading 7226.91 into 3 tariff lines; the duty is duty-free.

In the Turkish Customs Tariff Schedule, subheading 7226.91 covers 3 tariff lines and the statutory rate is 30%.

The Harmonized Tariff Schedule of the United States divides subheading 7226.91 into 6 tariff lines; the duty is duty-free.

World trade in these goods reached US$829.4m in 2024, down 0.4% on 2023.

Germany was the largest exporter with 27.5% of the total, ahead of the United States.

Germany imported the most (US$98.1m).

The United Kingdom ranked 11th among 66 exporters with US$16.2m; its largest buyer was Germany.

The United Kingdom imported US$8.2m, most of it from Sweden.

Duty rates compared

UK 50% Third-country duty 4 tariff lines EU Free Third-country duty 3 tariff lines Türkiye 30% Statutory rate (Law 474) 3 tariff lines USA Free General (MFN) 6 tariff lines

The Turkish schedule prints the statutory rate set under Customs Law 474. The rate applied at import is laid down in the Import Regime Decision and can be lower, or different by country of origin.

UK Global Tariff

UK lines →
  1. 7226 91 00 00 Not further worked than hot-rolled 50%
  2. 7226 91 20 00 Of tool steel 50%
  3. Other 50%
  4. 7226 91 91 00 Of a thickness of 4.75 mm or more 50%
  5. 7226 91 91 11 Of a width not exceeding 350 mm and of a thickness of 50 mm or more 50%
  6. 7226 91 91 19 Other 50%
  7. 7226 91 99 00 Of a thickness of less than 4.75 mm 50%

EU Combined Nomenclature

EU lines →
  1. 7226 91 Not further worked than hot-rolled:
  2. 7226 91 20 Of tool steel Free—
  3. Other:
  4. 7226 91 91 Of a thickness of 4,75 mm or more Free—
  5. 7226 91 99 Of a thickness of less than 4,75 mm Free—

Turkish Customs Tariff Schedule

Türkiye lines →

This line has no official text in this language; it is shown in the language of its tariff.

  1. 7226.91 Sadece sıcak haddelenmiş:
  2. 7226.91.20.00.00 Takım çeliğinden olanlar 30%
  3. Diğerleri:
  4. 7226.91.91.00.00 Kalınlığı 4,75 mm. veya daha fazla olanlar 30%
  5. 7226.91.99.00.00 Kalınlığı 4,75 mm.'den az olanlar 30%

Harmonized Tariff Schedule of the United States

USA lines →
  1. 7226.91 Not further worked than hot-rolled:
  2. Of tool steel (other than high-speed steel):
  3. 7226.91.05.00 Of chipper knife steel Freekg
  4. Other:
  5. 7226.91.15 Of a width of 300 mm or more Free
  6. 7226.91.15.30 Of ball-bearing steel kg
  7. 7226.91.15.60 Other kg
  8. 7226.91.25 Of a width of less than 300 mm Free
  9. 7226.91.25.30 Of ball-bearing steel kg
  10. 7226.91.25.60 Other kg
  11. Other:
  12. 7226.91.50.00 Of a thickness of 4.75 mm or more Freekg
  13. Of a thickness of less than 4.75 mm:
  14. 7226.91.70.00 Of a width of 300 mm or more Freekg
  15. 7226.91.80.00 Of a width of less than 300 mm Freekg

World trade in 2024

7226.91 · US$829.4m

Trade value (US$) no reported trade < US$164kUS$164k+US$4.6m+US$43m+> US$114.3m

Exports: 66
  1. Germany: US$228m
  2. United States: US$114.3m
  3. Austria: US$94.1m
  4. China: US$74.5m
  5. Japan: US$53.9m
  6. Slovakia: US$49m
  7. Sweden: US$43m
  8. Spain: US$23.2m
  9. France: US$21m
  10. Czechia: US$19.5m
  11. United Kingdom: US$16.2m
  12. South Korea: US$15.8m
  13. Italy: US$15.8m
  14. Canada: US$14.4m
  15. Poland: US$11.6m
  16. Slovenia: US$7.8m
  17. Netherlands: US$4.6m
  18. Türkiye: US$4.1m
  19. Finland: US$3.9m
  20. Taiwan: US$2.4m
  21. Denmark: US$2m
  22. Switzerland: US$1.8m
  23. India: US$1.5m
  24. Belgium: US$1.5m
  25. Singapore: US$1.4m
  26. Mexico: US$551.1k
  27. Malaysia: US$514.6k
  28. Hong Kong SAR China: US$481.5k
  29. Ukraine: US$473.6k
  30. Thailand: US$403.4k
  31. Hungary: US$327.7k
  32. Brazil: US$180.8k
  33. Serbia: US$164k
  34. Colombia: US$135.5k
  35. Kenya: US$130.6k
  36. Romania: US$87.5k
  37. Russia: US$78.5k
  38. Luxembourg: US$73.1k
  39. Egypt: US$70.7k
  40. Vietnam: US$65.5k
  41. Indonesia: US$53.2k
  42. Croatia: US$38.4k
  43. Peru: US$32.7k
  44. Bulgaria: US$32k
  45. Guatemala: US$31k
  46. South Africa: US$29.3k
  47. Latvia: US$27.6k
  48. Australia: US$26.8k
  49. North Macedonia: US$19.2k
  50. Chile: US$17.4k
  51. New Zealand: US$15.6k
  52. Macao SAR China: US$15.4k
  53. Israel: US$13.3k
  54. Portugal: US$10.8k
  55. Ireland: US$4.6k
  56. Norway: US$4.4k
  57. Malawi: US$4.2k
  58. Lithuania: US$2.4k
  59. Nicaragua: US$2k
  60. Greece: US$1.2k

Top exporters

RankCountryValueShare
1 Germany US$228m 27.5%
2 United States US$114.3m 13.8%
3 Austria US$94.1m 11.3%
4 China US$74.5m 9%
5 Japan US$53.9m 6.5%
6 Slovakia US$49m 5.9%
7 Sweden US$43m 5.2%
8 Spain US$23.2m 2.8%
9 France US$21m 2.5%
10 Czechia US$19.5m 2.4%

Top importers

RankCountryValueShare
1 Germany US$98.1m 11.8%
2 Canada US$97.9m 11.8%
3 Czechia US$96.5m 11.6%
4 Poland US$60.3m 7.3%
5 Switzerland US$50.3m 6.1%
6 Italy US$38.9m 4.7%
7 China US$33.3m 4%
8 United States US$32.2m 3.9%
9 France US$26.4m 3.2%
10 Vietnam US$24.2m 2.9%

Legal notes

Additional note

1. The following expressions have the meanings hereby assigned to them:

  • ‘Electrical’: for the purposes of subheadings 72091610, 72091710, 72091810, 72092610, 72092710, 72092810 and 72112320, flat-rolled products which under a current at 50 Hz and a magnetic flux of 1 T have a watt-loss per kilogram, calculated by the Epstein method, of:

    • 2,1 W or less, when their thickness does not exceed 0,20 mm,

    • 3,6 W or less, when their thickness is not less than 0,20 mm but less than 0,60 mm,

    • 6 W or less, when their thickness is not less than 0,60 mm but not greater than 1,50 mm.

  • ‘Tinplate’: for the purposes of subheadings 72101220, 72107010, 72121010 and 72124020, flat-rolled products (of a thickness of less than 0,5 mm) coated with a layer of metal containing, by weight, 97 % or more of tin.

  • ‘Tool steel’: for the purposes of subheadings 72241010, 72249002, 72253010, 72254012, 72269120, 72283020, 72284010, 72285020 and 72286020, alloy steels, other than stainless or high-speed steel, containing, by weight, one of the following compositions, with or without other elements:

    • less than 0,6 % of carbon

      and

      0,7 % or more of silicon and 0,05 % or more of vanadium

      or

      4 % or more of tungsten,

    • 0,8 % or more of carbon

      and

      0,05 % or more of vanadium,

    • more than 1,2 % of carbon

      and

      not less than 11 % but not more than 15 % of chromium,

    • 0,16 % or more but not more than 0,5 % of carbon

      and

      3,8 % or more but not more than 4,3 % of nickel

      and

      1,1 % or more but not more than 1,5 % of chromium

      and

      0,15 % or more but not more than 0,5 % of molybdenum,

    • 0,3 % or more but not more than 0,5 % of carbon

      and

      1,4 % or more but not more than 2,1 % of chromium

      and

      0,15 % or more but not more than 0,5 % of molybdenum

      and

      less than 1,2 % of nickel,

    • 0,3 % or more of carbon

      and

      less than 5,2 % of chromium

      and

      0,65 % or more of molybdenum or 0,4 % or more of tungsten,

    • 0,5 % or more but not more than 0,6 % of carbon

      and

      1,25 % or more but not more than 1,8 % of nickel

      and

      0,5 % or more but not more than 1,2 % of chromium

      and

      0,15 % or more but not more than 0,5 % of molybdenum.

Questions and answers

What is the HS code for not further worked than hot-rolled?

Not further worked than hot-rolled fall under HS subheading 7226.91, part of heading 7226, in section XV of the Harmonized System.

What is the import duty on not further worked than hot-rolled in the UK?

Under the UK Global Tariff, imports under 7226.91 from countries without a preferential agreement are charged at 50%. Preferential rates, anti-dumping duties and VAT are not included.

What is the import duty on not further worked than hot-rolled in the EU?

Under the EU Combined Nomenclature, imports under 7226.91 from countries without a preferential agreement are free of duty. Preferential rates, anti-dumping duties and VAT are not included.

Which country exports the most not further worked than hot-rolled?

Germany, with US$228m in 2024 (27.5% of world exports).