Subheading · Section XV

7304.29: Casing, tubing and drill pipe, of a kind used in drilling: other

7304.29

Official description Other

  • FreeUK
  • FreeEU
  • 15%–30%Türkiye
  • FreeUSA
  • US$6.9bnWorld trade in 2024

7304.29 is a six-digit subheading of heading 7304, tubes, pipes and hollow profiles, seamless, of iron, chapter 73.

In the UK Global Tariff, subheading 7304.29 covers 6 tariff lines and the duty is duty-free.

The EU Combined Nomenclature divides subheading 7304.29 into 3 tariff lines; the duty is duty-free.

In the Turkish Customs Tariff Schedule, subheading 7304.29 covers 7 tariff lines and the statutory rate is between 15% and 30%.

The Harmonized Tariff Schedule of the United States divides subheading 7304.29 into 6 tariff lines; the duty is duty-free.

World trade in these goods reached US$6.9bn in 2024, down 25.3% on 2023.

China was the largest exporter with 28.2% of the total, ahead of Mexico.

The United States imported the most (US$1.2bn).

The United Kingdom ranked 22nd among 104 exporters with US$42.4m; its largest buyer was the Netherlands.

The United Kingdom imported US$79.8m, most of it from Japan.

Duty rates compared

UK Free Third-country duty 6 tariff lines EU Free Third-country duty 3 tariff lines Türkiye 15% – 30% Statutory rate (Law 474) 7 tariff lines · average 23.6% USA Free General (MFN) 6 tariff lines

The Turkish schedule prints the statutory rate set under Customs Law 474. The rate applied at import is laid down in the Import Regime Decision and can be lower, or different by country of origin.

UK Global Tariff

UK lines →
  1. 7304 29 00 00 Other Free
  2. 7304 29 10 00 Of an external diameter not exceeding 168.3 mm Free
  3. 7304 29 10 20 Of circular cross-section and with a carbon equivalent value (cev) not exceeding 0.86 according to the international institute of welding (iiw) formula and chemical analysis Free
  4. 7304 29 10 80 Other Free
  5. 7304 29 30 00 Of an external diameter exceeding 168.3 mm but not exceeding 406.4 mm Free
  6. 7304 29 30 20 Of circular cross-section and with a carbon equivalent value (cev) not exceeding 0.86 according to the international institute of welding (iiw) formula and chemical analysis Free
  7. 7304 29 30 80 Other Free
  8. 7304 29 90 00 Of an external diameter exceeding 406.4 mm Free
  9. 7304 29 90 10 Casings Free
  10. 7304 29 90 90 Other Free

EU Combined Nomenclature

EU lines →
  1. 7304 29 Other:
  2. 7304 29 10 Of an external diameter not exceeding 168,3 mm Free—
  3. 7304 29 30 Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm Free—
  4. 7304 29 90 Of an external diameter exceeding 406,4 mm Free—

Turkish Customs Tariff Schedule

Türkiye lines →

This line has no official text in this language; it is shown in the language of its tariff.

  1. 7304.29 Diğerleri:
  2. Dış çapı 168,3 mm. yi geçmeyenler:
  3. 7304.29.10.10.00 Borular 30%
  4. 7304.29.10.90.00 Aksam ve parçalar 15%
  5. Dış çapı 168,3mm.yi geçen, fakat 406,4 mm.yi geçmeyenler:
  6. Borular
  7. 7304.29.30.10.11 Dış çapı 244,5 mm.yi geçmeyenler 30%
  8. 7304.29.30.10.12 Dış çapı 244,5 mm.yi geçen, fakat 406,4 mm.yi geçmeyenler 30%
  9. 7304.29.30.90.00 Aksam ve parçalar 15%
  10. Dış çapı 406,4 mm. yi geçenler:
  11. 7304.29.90.10.00 Borular 30%
  12. 7304.29.90.90.00 Aksam ve parçalar 15%

Harmonized Tariff Schedule of the United States

USA lines →
  1. 7304.29 Other:
  2. Casing:
  3. Of iron or nonalloy steel:
  4. 7304.29.10 Threaded or coupled Free
  5. Having an outside diameter less than 215.9 mm:
  6. 7304.29.10.10 Having a wall thickness less than 12.7 mm kg
  7. 7304.29.10.20 Having a wall thickness of 12.7 mm or more kg
  8. Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
  9. 7304.29.10.30 Having a wall thickness less than 12.7 mm kg
  10. 7304.29.10.40 Having a wall thickness of 12.7 mm or more kg
  11. Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
  12. 7304.29.10.50 Having a wall thickness less than 12.7 mm kg
  13. 7304.29.10.60 Having a wall thickness of 12.7 mm or more kg
  14. 7304.29.10.80 Having an outside diameter exceeding 406.4 mm kg
  15. 7304.29.20 Other Free
  16. Having an outside diameter less than 215.9 mm:
  17. 7304.29.20.10 Having a wall thickness less than 12.7 mm kg
  18. 7304.29.20.20 Having a wall thickness of 12.7 mm or more kg
  19. Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
  20. 7304.29.20.30 Having a wall thickness less than 12.7 mm kg
  21. 7304.29.20.40 Having a wall thickness of 12.7 mm or more kg
  22. Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
  23. 7304.29.20.50 Having a wall thickness less than 12.7 mm kg
  24. 7304.29.20.60 Having a wall thickness of 12.7 mm or more kg
  25. 7304.29.20.80 Having an outside diameter exceeding 406.4 mm kg
  26. Of other alloy steel:
  27. 7304.29.31 Threaded or coupled Free
  28. Having an outside diameter less than 215.9 mm:
  29. 7304.29.31.10 Having a wall thickness less than 12.7 mm kg
  30. 7304.29.31.20 Having a wall thickness of 12.7 mm or more kg
  31. Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
  32. 7304.29.31.30 Having a wall thickness less than 12.7 mm kg
  33. 7304.29.31.40 Having a wall thickness of 12.7 mm or more kg
  34. Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
  35. 7304.29.31.50 Having a wall thickness less than 12.7 mm kg
  36. 7304.29.31.60 Having a wall thickness of 12.7 mm or more kg
  37. 7304.29.31.80 Having an outside diameter exceeding 406.4 mm kg
  38. 7304.29.41 Other Free
  39. Having an outside diameter less than 215.9 mm:
  40. 7304.29.41.10 Having a wall thickness less than 12.7 mm kg
  41. 7304.29.41.20 Having a wall thickness of 12.7 mm or more kg
  42. Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
  43. 7304.29.41.30 Having a wall thickness less than 12.7 mm kg
  44. 7304.29.41.40 Having a wall thickness of 12.7 mm or more kg
  45. Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
  46. 7304.29.41.50 Having a wall thickness less than 12.7 mm kg
  47. 7304.29.41.60 Having a wall thickness of 12.7 mm or more kg
  48. 7304.29.41.80 Having an outside diameter exceeding 406.4 mm kg
  49. Tubing:
  50. 7304.29.50 Of iron or nonalloy steel Free
  51. Having an outside diameter not exceeding 114.3 mm:
  52. 7304.29.50.15 Having a wall thickness not exceeding 9.5 mm kg
  53. 7304.29.50.30 Having a wall thickness exceeding 9.5 mm kg
  54. 7304.29.50.45 Having an outside diameter exceeding 114.3 mm but less than 215.9 mm kg
  55. 7304.29.50.60 Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm kg
  56. 7304.29.50.75 Having an outside diameter exceeding 406.4 mm kg
  57. 7304.29.61 Of other alloy steel Free
  58. Having an outside diameter not exceeding 114.3 mm:
  59. 7304.29.61.15 Having a wall thickness not exceeding 9.5 mm kg
  60. 7304.29.61.30 Having a wall thickness exceeding 9.5 mm kg
  61. 7304.29.61.45 Having an outside diameter exceeding 114.3 mm but less than 215.9 mm kg
  62. 7304.29.61.60 Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm kg
  63. 7304.29.61.75 Having an outside diameter exceeding 406.4 mm kg

World trade in 2024

7304.29 · US$6.9bn

Trade value (US$) no reported trade < US$575.8kUS$575.8k+US$16.4m+US$137.4m+> US$614.2m

Exports: 104
  1. China: US$1.9bn
  2. Mexico: US$804.8m
  3. Japan: US$744.8m
  4. Brazil: US$614.2m
  5. Austria: US$489.2m
  6. Italy: US$344.7m
  7. Argentina: US$241m
  8. Canada: US$197.4m
  9. United States: US$167.9m
  10. Russia: US$138.3m
  11. Indonesia: US$137.4m
  12. Romania: US$137.1m
  13. France: US$122.1m
  14. Ukraine: US$104.6m
  15. Thailand: US$83.8m
  16. Spain: US$75.3m
  17. Colombia: US$71.8m
  18. Germany: US$66.9m
  19. Saudi Arabia: US$63.1m
  20. South Korea: US$61.9m
  21. Singapore: US$44.2m
  22. United Kingdom: US$42.4m
  23. Azerbaijan: US$22.5m
  24. Norway: US$20.5m
  25. Kazakhstan: US$19.5m
  26. India: US$16.4m
  27. Czechia: US$10.8m
  28. Netherlands: US$10.3m
  29. Belgium: US$9.2m
  30. United Arab Emirates: US$7.2m
  31. Uruguay: US$6.4m
  32. Senegal: US$4.7m
  33. South Africa: US$4.2m
  34. Serbia: US$3.9m
  35. Tunisia: US$3.5m
  36. Türkiye: US$3m
  37. Slovakia: US$2.8m
  38. Poland: US$2.7m
  39. Denmark: US$2.5m
  40. Taiwan: US$2.2m
  41. Malaysia: US$2.1m
  42. Ecuador: US$2.1m
  43. Switzerland: US$1.9m
  44. Australia: US$1.6m
  45. Philippines: US$1.5m
  46. Georgia: US$1.3m
  47. Zambia: US$1.1m
  48. Sweden: US$984.2k
  49. Pakistan: US$935.8k
  50. Egypt: US$627.5k
  51. Bahrain: US$575.8k
  52. Peru: US$515.7k
  53. Israel: US$413k
  54. Côte d’Ivoire: US$350.6k
  55. Luxembourg: US$298.4k
  56. Portugal: US$297.6k
  57. Brunei: US$283.1k
  58. Hungary: US$243.5k
  59. Bulgaria: US$238.1k
  60. Kuwait: US$229.2k

Top exporters

RankCountryValueShare
1 China US$1.9bn 28.2%
2 Mexico US$804.8m 11.7%
3 Japan US$744.8m 10.9%
4 Brazil US$614.2m 8.9%
5 Austria US$489.2m 7.1%
6 Italy US$344.7m 5%
7 Argentina US$241m 3.5%
8 Canada US$197.4m 2.9%
9 United States US$167.9m 2.4%
10 Russia US$138.3m 2%

Top importers

RankCountryValueShare
1 United States US$1.2bn 17.3%
2 Saudi Arabia US$549.9m 8%
3 Canada US$452m 6.6%
4 United Arab Emirates US$363.1m 5.3%
5 Oman US$348.8m 5.1%
6 Kuwait US$343.9m 5%
7 Norway US$261.4m 3.8%
8 Indonesia US$231.9m 3.4%
9 Türkiye US$199.8m 2.9%
10 Iraq US$189.1m 2.8%

Questions and answers

What is the HS code for casing, tubing and drill pipe, of a kind used in drilling: other?

Casing, tubing and drill pipe, of a kind used in drilling: other fall under HS subheading 7304.29, part of heading 7304, in section XV of the Harmonized System.

What is the import duty on casing, tubing and drill pipe in the UK?

Under the UK Global Tariff, imports under 7304.29 from countries without a preferential agreement are free of duty. Preferential rates, anti-dumping duties and VAT are not included.

What is the import duty on casing, tubing and drill pipe in the EU?

Under the EU Combined Nomenclature, imports under 7304.29 from countries without a preferential agreement are free of duty. Preferential rates, anti-dumping duties and VAT are not included.

Which country exports the most casing, tubing and drill pipe?

China, with US$1.9bn in 2024 (28.2% of world exports).