Subheading · Section XV

7306.30: Other, welded, of circular cross-section, of iron or non-alloy steel

7306.30
  • 50%UK
  • FreeEU
  • 30%Türkiye
  • FreeUSA
  • US$7.8bnWorld trade in 2024

7306.30 is a six-digit subheading of heading 7306, other tubes, pipes and hollow profiles, chapter 73.

In the UK Global Tariff, subheading 7306.30 covers 11 tariff lines and the duty is 50%.

The EU Combined Nomenclature divides subheading 7306.30 into 7 tariff lines; the duty is duty-free.

In the Turkish Customs Tariff Schedule, subheading 7306.30 covers 14 tariff lines and the statutory rate is 30%.

The Harmonized Tariff Schedule of the United States divides subheading 7306.30 into 3 tariff lines; the duty is duty-free.

World trade in these goods reached US$7.8bn in 2024, down 7.1% on 2023.

Italy was the largest exporter with 15.1% of the total, ahead of China.

The United States imported the most (US$1.2bn).

The United Kingdom ranked 23rd among 133 exporters with US$66.6m; its largest buyer was Ireland.

The United Kingdom imported US$175.4m, most of it from Türkiye.

Duty rates compared

UK 50% Third-country duty 11 tariff lines EU Free Third-country duty 7 tariff lines Türkiye 30% Statutory rate (Law 474) 14 tariff lines USA Free General (MFN) 3 tariff lines

The Turkish schedule prints the statutory rate set under Customs Law 474. The rate applied at import is laid down in the Import Regime Decision and can be lower, or different by country of origin.

UK Global Tariff

UK lines →
  1. 7306 30 00 00 Other, welded, of circular cross-section, of iron or non-alloy steel 50%
  2. Precision tubes 50%
  3. 7306 30 12 00 Cold-drawn or cold-rolled (cold-reduced) 50%
  4. 7306 30 18 00 Other 50%
  5. Other 50%
  6. Threaded or threadable tubes (gas pipe) 50%
  7. 7306 30 41 00 Plated or coated with zinc 50%
  8. 7306 30 41 20 Tubes and pipes of an external diameter not exceeding 168.3 mm 50%
  9. 7306 30 41 90 Other 50%
  10. 7306 30 49 00 Other 50%
  11. 7306 30 49 20 Tubes and pipes of an external diameter not exceeding 168.3 mm 50%
  12. 7306 30 49 90 Other 50%
  13. Other, of an external diameter 50%
  14. Not exceeding 168.3 mm 50%
  15. 7306 30 72 00 Plated or coated with zinc 50%
  16. 7306 30 72 80 Tubes and pipes 50%
  17. 7306 30 72 90 Other 50%
  18. 7306 30 77 00 Other 50%
  19. 7306 30 77 80 Tubes and pipes 50%
  20. 7306 30 77 90 Other 50%
  21. 7306 30 80 00 Exceeding 168.3 mm but not exceeding 406.4 mm 50%

EU Combined Nomenclature

EU lines →
  1. 7306 30 Other, welded, of circular cross-section, of iron or non-alloy steel:
  2. Precision tubes:
  3. 7306 30 12 Cold-drawn or cold-rolled (cold-reduced) Free—
  4. 7306 30 18 Other Free—
  5. Other:
  6. Threaded or threadable tubes (gas pipe):
  7. 7306 30 41 Plated or coated with zinc Free—
  8. 7306 30 49 Other Free—
  9. Other, of an external diameter:
  10. Not exceeding 168,3 mm:
  11. 7306 30 72 Plated or coated with zinc Free—
  12. 7306 30 77 Other Free—
  13. 7306 30 80 Exceeding 168,3 mm but not exceeding 406,4 mm Free—

Turkish Customs Tariff Schedule

Türkiye lines →

This line has no official text in this language; it is shown in the language of its tariff.

  1. 7306.30 Demir veya alaşımsız çelikten kesiti daire şeklinde olan diğerleri (kaynaklı):
  2. Hassas borular:
  3. Soğuk çekilmiş veya soğuk haddelenmiş:
  4. 7306.30.12.10.00 Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış) 30%
  5. 7306.30.12.90.00 Diğerleri 30%
  6. Diğerleri:
  7. 7306.30.18.10.00 Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış) 30%
  8. 7306.30.18.90.00 Diğerleri 30%
  9. Diğerleri:
  10. Diş açılmış veya diş açılabilir borular (gaz boruları):
  11. Çinko ile kaplanmış olanlar:
  12. 7306.30.41.10.00 Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış) 30%
  13. 7306.30.41.90.00 Diğerleri 30%
  14. Diğerleri:
  15. 7306.30.49.10.00 Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış) 30%
  16. 7306.30.49.90.00 Diğerleri 30%
  17. Diğerleri:
  18. Dış çapı 168,3 mm. yi geçmeyenler:
  19. Çinko ile kaplanmış olanlar:
  20. 7306.30.72.10.00 Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış) 30%
  21. 7306.30.72.90.00 Diğerleri 30%
  22. Diğerleri:
  23. 7306.30.77.10.00 Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış) 30%
  24. 7306.30.77.90.00 Diğerleri 30%
  25. Dış çapı 168,3 mm. yi geçen fakat 406,4 mm. yi geçmeyenler:
  26. 7306.30.80.10.00 Sivil hava taşıtlarında kullanılmaya mahsus, gaz ve sıvıların naklinde kullanılan türde olanlar (bağlantı parçaları takılmış) 30%
  27. 7306.30.80.90.00 Diğerleri 30%

Harmonized Tariff Schedule of the United States

USA lines →
  1. 7306.30 Other, welded, of circular cross section, of iron or nonalloy steel:
  2. 7306.30.10 Having a wall thickness of less than 1.65 mm Free
  3. 7306.30.10.10 Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit kg
  4. 7306.30.10.90 Other kg
  5. Having a wall thickness of 1.65 mm or more:
  6. 7306.30.30.00 Tapered steel pipes and tubes principally used as parts of illuminating articles Freekg
  7. 7306.30.50 Other Free
  8. 7306.30.50.10 Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn kg
  9. 7306.30.50.15 Other, cold-drawn kg
  10. 7306.30.50.20 Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm kg
  11. Other:
  12. With an outside diameter not exceeding 114.3 mm:
  13. Galvanized:
  14. Imported with coupling:
  15. 7306.30.50.26 With an outside diameter not exceeding 50.8 mm kg
  16. 7306.30.50.27 With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm kg
  17. 7306.30.50.28 Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit kg
  18. Other:
  19. 7306.30.50.31 With an outside diameter not exceeding 50.8 mm kg
  20. 7306.30.50.33 With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm kg
  21. Other:
  22. 7306.30.50.35 Tube and pipe hollows for redrawing kg
  23. Imported with coupling:
  24. 7306.30.50.41 With an outside diameter not exceeding 50.8 mm kg
  25. 7306.30.50.43 With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm kg
  26. Other:
  27. 7306.30.50.56 With an outside diameter not exceeding 50.8 mm kg
  28. 7306.30.50.57 With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm kg
  29. With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm:
  30. 7306.30.50.85 Galvanized kg
  31. 7306.30.50.90 Other kg

World trade in 2024

7306.30 · US$7.8bn

Trade value (US$) no reported trade < US$2.1mUS$2.1m+US$34.9m+US$168.1m+> US$505.2m

Exports: 133
  1. Italy: US$1.2bn
  2. China: US$1.1bn
  3. Türkiye: US$556.2m
  4. United States: US$505.2m
  5. Germany: US$415.1m
  6. India: US$357.6m
  7. Mexico: US$328.8m
  8. Spain: US$295.6m
  9. South Korea: US$276.7m
  10. Canada: US$248m
  11. United Arab Emirates: US$247.7m
  12. Vietnam: US$170.2m
  13. Poland: US$168.1m
  14. Thailand: US$162m
  15. Russia: US$157.2m
  16. Japan: US$127.3m
  17. Netherlands: US$122.4m
  18. Czechia: US$95.1m
  19. Austria: US$82.6m
  20. Oman: US$77.6m
  21. Portugal: US$75.8m
  22. France: US$72m
  23. United Kingdom: US$66.6m
  24. Romania: US$58.6m
  25. Cambodia: US$55.7m
  26. Taiwan: US$53.2m
  27. Bulgaria: US$49.2m
  28. Lithuania: US$47.8m
  29. Switzerland: US$46.1m
  30. Belgium: US$44.9m
  31. Finland: US$36.4m
  32. North Macedonia: US$35m
  33. Brazil: US$34.9m
  34. Slovakia: US$27.7m
  35. Guatemala: US$24.4m
  36. Sweden: US$23.8m
  37. Malaysia: US$23.8m
  38. Latvia: US$23.2m
  39. Ireland: US$22.4m
  40. Serbia: US$19.7m
  41. Costa Rica: US$16.6m
  42. Indonesia: US$16m
  43. Saudi Arabia: US$14.4m
  44. Hungary: US$13m
  45. Brunei: US$12.4m
  46. Kazakhstan: US$12m
  47. Greece: US$11.5m
  48. Slovenia: US$10.9m
  49. Denmark: US$10.3m
  50. Ukraine: US$10.3m
  51. Pakistan: US$10.1m
  52. South Africa: US$9.6m
  53. Ecuador: US$8.8m
  54. Dominican Republic: US$7.4m
  55. Tunisia: US$5.7m
  56. Hong Kong SAR China: US$5.5m
  57. Croatia: US$4.8m
  58. Luxembourg: US$4.3m
  59. Nepal: US$3.8m
  60. El Salvador: US$3.5m

Top exporters

RankCountryValueShare
1 Italy US$1.2bn 15.1%
2 China US$1.1bn 14.7%
3 Türkiye US$556.2m 7.1%
4 United States US$505.2m 6.5%
5 Germany US$415.1m 5.3%
6 India US$357.6m 4.6%
7 Mexico US$328.8m 4.2%
8 Spain US$295.6m 3.8%
9 South Korea US$276.7m 3.6%
10 Canada US$248m 3.2%

Top importers

RankCountryValueShare
1 United States US$1.2bn 15.6%
2 Germany US$651.7m 8.4%
3 Canada US$482.5m 6.2%
4 Mexico US$355.9m 4.6%
5 France US$313.1m 4%
6 Poland US$303.7m 3.9%
7 Netherlands US$191.4m 2.5%
8 United Arab Emirates US$185.7m 2.4%
9 United Kingdom US$175.4m 2.2%
10 Czechia US$173.4m 2.2%

Questions and answers

What is the HS code for other, welded, of circular cross-section, of iron or non-alloy steel?

Other, welded, of circular cross-section, of iron or non-alloy steel fall under HS subheading 7306.30, part of heading 7306, in section XV of the Harmonized System.

What is the import duty on other, welded, of circular cross-section, of iron… in the UK?

Under the UK Global Tariff, imports under 7306.30 from countries without a preferential agreement are charged at 50%. Preferential rates, anti-dumping duties and VAT are not included.

What is the import duty on other, welded, of circular cross-section, of iron… in the EU?

Under the EU Combined Nomenclature, imports under 7306.30 from countries without a preferential agreement are free of duty. Preferential rates, anti-dumping duties and VAT are not included.

Which country exports the most other, welded, of circular cross-section, of iron…?

Italy, with US$1.2bn in 2024 (15.1% of world exports).