Harmonized Tariff Schedule of the United States
Harmonized Tariff Schedule of the United States, chapter 72: Iron and steel
- 262Tariff lines
- 0%–10%Rate
Chapter 72 has 262 lines in the Harmonized Tariff Schedule of the United States, spread over 29 headings.
Rates run from 0% to 10%, averaging 0.3%; 240 lines are duty-free.
Heading 7202, ferro-alloys, is divided furthest: 24 lines.
The most common rate is zero, on 240 lines.
The highest is 10% on 7202.50.00 (ferroalloys, ferrosilicon chromium).
7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms
7202 Ferro-alloys
- 7202.11.10Containing by weight more than 2 percent but not more than 4 percent of carbon
- 7202.11.50Containing by weight more than 4 percent of carbon
- 7202.19.10Containing by weight not more than 1 percent of carbon
- 7202.19.50Containing by weight more than 1 percent but not more than 2 percent of carbon
- 7202.21.10Containing by weight more than 3 percent of calcium
- 7202.21.50Containing by weight more than 55 percent but not more than: other
- 7202.21.75Containing by weight more than 80 percent but not more than 90 percent of silicon
- 7202.21.90Containing by weight more than 90 percent of silicon
- 7202.29.00Ferroalloys, ferrosilicon, other
- 7202.30.00Ferroalloys, ferrosilicon manganese
- 7202.41.00Containing by weight more than 4 percent of carbon
- 7202.49.10Containing by weight more than 3 percent of carbon
- 7202.49.50Ferroalloys, ferrochromium, other, other
- 7202.50.00Ferroalloys, ferrosilicon chromium
- 7202.60.00Ferroalloys, ferronickel
- 7202.70.00Ferroalloys, ferromolybdenum
- 7202.80.00Ferrotungsten and ferrosilicon tungsten
- 7202.91.00Ferrotitanium and ferrosilicon titanium
- 7202.92.00Ferroalloys, other, ferrovanadium
- 7202.93.40Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon
- 7202.93.80Ferroalloys, other, ferroniobium, other
- 7202.99.10Ferroalloys, other, other, ferrozirconium
- 7202.99.20Ferroalloys, other, other, calcium silicon
- 7202.99.80Ferroalloys, other, other, other
7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel
- 7204.10.00Waste and scrap of cast iron
- 7204.21.00Waste and scrap of alloy steel: of stainless steel
- 7204.29.00Waste and scrap of alloy steel: other
- 7204.30.00Waste and scrap of tinned iron or steel
- 7204.41.00Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
- 7204.49.00Other waste and scrap: other
- 7204.50.00Ferrous waste and scrap: remelting scrap ingots
7205 Granules and powders, of pig iron, spiegeleisen, iron or steel
7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)
7207 Semi-finished products of iron or non-alloy steel
- 7207.11.00Of rectangular (including square) cross section, the width measuring less than twice the thickness
- 7207.12.00Other, of rectangular (other than square) cross section
- 7207.19.00Containing by weight less than 0.25 percent of carbon: other
- 7207.20.00Containing by weight 0.25 percent or more of carbon
7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
- 7208.10.15In coils, not further worked than hot-rolled, with patterns: pickled
- 7208.10.30Of a thickness of 4.75 mm or more
- 7208.10.60Of a thickness of less than 4.75 mm
- 7208.25.30Of a thickness of 4.75 mm or more: of high-strength steel
- 7208.25.60Of a thickness of 4.75 mm or more: other
- 7208.26.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27.00Of a thickness of less than 3 mm
- 7208.36.00Of a thickness exceeding 10 mm
- 7208.37.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.38.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.39.00Of a thickness of less than 3 mm
- 7208.40.30Of a thickness of 4.75 mm or more
- 7208.40.60Of a thickness of less than 4.75 mm
- 7208.51.00Of a thickness exceeding 10 mm
- 7208.52.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.53.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54.00Of a thickness of less than 3 mm
- 7208.90.00Flat-rolled products of iron or nonalloy steel, of a width: other
7209 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
- 7209.15.00Of a thickness of 3 mm or more
- 7209.16.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.17.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.18.15Of a thickness of less than 0.5 mm: of high-strength steel
- 7209.18.25Of a thickness of less than 0.361 mm (blackplate)
- 7209.18.60Of a thickness of less than 0.5 mm: other, other
- 7209.25.00Of a thickness of 3 mm or more
- 7209.26.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.27.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.28.00Of a thickness of less than 0.5 mm
- 7209.90.00Flat-rolled products of iron or nonalloy steel, of a width: other
7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
- 7210.11.00Of a thickness of 0.5 mm or more
- 7210.12.00Of a thickness of less than 0.5 mm
- 7210.20.00Plated or coated with lead, including terne-plate
- 7210.30.00Electrolytically plated or coated with zinc
- 7210.41.00Otherwise plated or coated with zinc: corrugated
- 7210.49.00Otherwise plated or coated with zinc: other
- 7210.50.00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61.00Plated or coated with aluminum-zinc alloys
- 7210.69.00Plated or coated with aluminum: other
- 7210.70.30Not coated or plated with metal and not clad
- 7210.70.60Painted, varnished or coated with plastics: other
- 7210.90.10Flat-rolled products of iron or nonalloy steel, of a width: other, clad
- 7210.90.60Electrolytically coated or plated with base metal
- 7210.90.90Flat-rolled products of iron or nonalloy steel, of a width: other, other, other
7211 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
- 7211.13.00Not further worked than hot-rolled: universal mill plate
- 7211.14.00Other, of a thickness of 4.75 mm or more
- 7211.19.15Of a width of less than 300 mm: of high-strength steel
- 7211.19.20Of a thickness exceeding 1.25 mm
- 7211.19.30Of a width of less than 300 mm: other, other
- 7211.19.45Not further worked than hot-rolled: other, other, of high-strength steel
- 7211.19.60Not further worked than hot-rolled: other, other, other, pickled
- 7211.19.75Not further worked than hot-rolled: other, other, other, other
- 7211.23.15Of a thickness exceeding 1.25 mm: of high-strength steel
- 7211.23.20Of a thickness exceeding 1.25 mm: other
- 7211.23.30Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
- 7211.23.45Of a thickness not exceeding 0.25 mm
- 7211.23.60Containing by weight less than 0.25 percent of carbon: other
- 7211.29.20Of a thickness exceeding 0.25 mm
- 7211.29.45Of a width of less than 300 mm: other
- 7211.29.60Not further worked than cold-rolled (cold-reduced): other, other
- 7211.90.00Flat-rolled products of iron or nonalloy steel, of a width: other
7212 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
- 7212.10.00Plated or coated with tin
- 7212.20.00Electrolytically plated or coated with zinc
- 7212.30.10Of a thickness exceeding 0.25 mm or more
- 7212.30.30Of a width of less than 300 mm: other
- 7212.30.50Otherwise plated or coated with zinc: other
- 7212.40.10Of a width of less than 300 mm
- 7212.40.50Painted, varnished or coated with plastics: other
- 7212.50.00Otherwise plated or coated
- 7212.60.00Flat-rolled products of iron or nonalloy steel, of a width: clad
7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
- 7213.10.00Concrete reinforcing bars and rods
- 7213.20.00Other, of free-cutting steel
- 7213.91.30Not tempered, not treated and not partly manufactured
- 7213.91.45Containing by weight 0.6 percent or more of carbon
- 7213.91.60Of circular cross section measuring less than 14: other, other
- 7213.99.00Bars and rods, hot-rolled, in irregularly wound coils: other, other
7214 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7215 Other bars and rods of iron or non-alloy steel
- 7215.10.00Of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215.50.00Other, not further worked than cold-formed or cold-finished
- 7215.90.10Plated or coated with metal: not cold-formed
- 7215.90.30Plated or coated with metal: cold-formed
- 7215.90.50Other bars and rods of iron or nonalloy steel: other, other
7216 Angles, shapes and sections of iron or non-alloy steel
- 7216.10.00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.21.00L or T sections, not further worked than hot-rolled: l sections
- 7216.22.00L or T sections, not further worked than hot-rolled: t sections
- 7216.31.00U, I or H sections, not further worked than hot-rolled: u sections
- 7216.32.00I sections (standard beams)
- 7216.33.00U, I or H sections, not further worked than hot-rolled: h sections
- 7216.40.00L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
- 7216.50.00Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
- 7216.61.00Obtained from flat-rolled products
- 7216.69.00Angles, shapes and sections, not further worked than: other
- 7216.91.00Cold-formed or cold-finished from flat-rolled products
- 7216.99.00Angles, shapes and sections of iron or nonalloy steel: other, other
7217 Wire of iron or non-alloy steel
- 7217.10.10Of a thickness not exceeding 0.25 mm
- 7217.10.20Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
- 7217.10.30Of a thickness exceeding 1.25 mm
- 7217.10.40With a diameter of less than 1.5 mm
- 7217.10.50With a diameter of 1.5 mm or more
- 7217.10.60Containing by weight less than 0.25 percent of carbon: other wire
- 7217.10.70Not plated or coated, whether or not polished: other, flat wire
- 7217.10.80Not plated or coated, whether or not polished: other, round wire
- 7217.10.90Not plated or coated, whether or not polished: other, other wire
- 7217.20.15Plated or coated with zinc: flat wire
- 7217.20.30With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
- 7217.20.45Plated or coated with zinc: round wire, other
- 7217.20.60Containing by weight less than 0.25 percent of carbon
- 7217.20.75Plated or coated with zinc: other, other
- 7217.30.15Plated or coated with other base metals: flat wire
- 7217.30.30With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
- 7217.30.45Plated or coated with other base metals: round wire, other
- 7217.30.60Containing by weight less than 0.25 percent of carbon
- 7217.30.75Plated or coated with other base metals: other, other
- 7217.90.10Wire of iron or nonalloy steel: other, coated with plastics
- 7217.90.50Wire of iron or nonalloy steel: other, other
7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7219 Flat-rolled products of stainless steel, of a width of 600 mm or more
- 7219.11.00Of a thickness exceeding 10 mm
- 7219.12.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.00Of a thickness of less than 3 mm
- 7219.21.00Of a thickness exceeding 10 mm
- 7219.22.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.00Of a thickness of less than 3 mm
- 7219.31.00Of a thickness of 4.75 mm or more
- 7219.32.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.33.00Of a thickness exceeding 1 mm but less than 3 mm
- 7219.34.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7219.35.00Of a thickness of less than 0.5 mm
- 7219.90.00Flat-rolled products of stainless steel, of a width of 600: other
7220 Flat-rolled products of stainless steel, of a width of less than 600 mm
- 7220.11.00Of a thickness of 4.75 mm or more
- 7220.12.10Of a width of 300 mm or more
- 7220.12.50Of a width of less than 300 mm
- 7220.20.10Of a width of 300 mm or more
- 7220.20.60Of a thickness exceeding 1.25 mm
- 7220.20.70Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
- 7220.20.80Of a thickness not exceeding 0.25 mm: razor blade steel
- 7220.20.90Of a thickness not exceeding 0.25 mm: other
- 7220.90.00Flat-rolled products of stainless steel, of a width of less: other
7221 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
- 7222.11.00Bars and rods, not further worked than hot-rolled: of circular cross-section
- 7222.19.00Bars and rods, not further worked than hot-rolled: other
- 7222.20.00Bars and rods, not further worked than cold-formed or cold-finished
- 7222.30.00Other bars and rods
- 7222.40.30Hot-rolled, not drilled, not punched and not otherwise advanced
- 7222.40.60Angles, shapes and sections: other
7223 Wire of stainless steel
7224 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more
- 7225.11.00Of silicon electrical steel: grain-oriented
- 7225.19.00Of silicon electrical steel: other
- 7225.30.11Of a thickness of 4.75 mm or more: of tool steel
- 7225.30.30Of a thickness of 4.75 mm or more: other
- 7225.30.51Of a thickness of less than 4.75 mm: of tool steel
- 7225.30.70Of a thickness of less than 4.75 mm: other
- 7225.40.11Of a thickness of 4.75 mm or more: of tool steel
- 7225.40.30Of a thickness of 4.75 mm or more: other
- 7225.40.51Of a thickness of less than 4.75 mm: of tool steel
- 7225.40.70Of a thickness of less than 4.75 mm: other
- 7225.50.11Other, not further worked than cold-rolled (cold-reduced): of tool steel
- 7225.50.60Of a thickness of 4.75 mm or more
- 7225.50.70Of a thickness of less than 4.75 mm: heat-resisting steel
- 7225.50.80Of a thickness of less than 4.75 mm: other
- 7225.91.00Electrolytically plated or coated with zinc
- 7225.92.00Otherwise plated or coated with zinc
- 7225.99.00Flat-rolled products of other alloy steel, of a width: other, other
7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm
- 7226.11.10Of a width of 300 mm or more
- 7226.11.90Of a width of less than 300 mm
- 7226.19.10Of a width of 300 mm or more
- 7226.19.90Of a width of less than 300 mm
- 7226.20.00Flat-rolled products of other alloy steel, of a width: of high-speed steel
- 7226.91.05Of chipper knife steel
- 7226.91.15Of a width of 300 mm or more
- 7226.91.25Of a width of less than 300 mm
- 7226.91.50Of a thickness of 4.75 mm or more
- 7226.91.70Of a width of 300 mm or more
- 7226.91.80Of a width of less than 300 mm
- 7226.92.10Of a width of 300 mm or more
- 7226.92.30Of a width of less than 300 mm
- 7226.92.50Of a width of 300 mm or more
- 7226.92.70Of a thickness not exceeding 0.25 mm
- 7226.92.80Of a thickness exceeding 0.25 mm
- 7226.99.01Flat-rolled products of other alloy steel, of a width: other, other
7227 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
- 7227.10.00Bars and rods, hot-rolled, in irregularly wound coils: of high-speed steel
- 7227.20.00Bars and rods, hot-rolled, in irregularly wound coils: of silico-manganese steel
- 7227.90.10Not tempered, not treated, and not partly manufactured
- 7227.90.20Of tool steel (other than high-speed steel): other
- 7227.90.60Bars and rods, hot-rolled, in irregularly wound coils: other, other
7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
- 7228.10.00Bars and rods, of high-speed steel
- 7228.20.10Bars and rods, of silico-manganese steel: not cold-formed
- 7228.20.50Bars and rods, of silico-manganese steel: cold-formed
- 7228.30.20Of tool steel (other than high-speed steel): of ball-bearing steel
- 7228.30.40Of chipper knife steel, not cold-formed
- 7228.30.60Of tool steel (other than high-speed steel): other
- 7228.30.80Other bars and rods, not further worked than hot-rolled: other
- 7228.40.00Other bars and rods, not further worked than forged
- 7228.50.10Of tool steel (other than high-speed steel)
- 7228.50.50Other bars and rods, not further worked than cold-formed: other
- 7228.60.10Of tool steel (other than high-speed steel)
- 7228.60.60Other bars and rods: other, not cold-formed
- 7228.60.80Other bars and rods: other, cold-formed
- 7228.70.30Hot-rolled, not drilled, not punched and not otherwise advanced
- 7228.70.60Angles, shapes and sections: other
- 7228.80.00Hollow drill bars and rods
7229 Wire of other alloy steel
- 7229.20.00Wire of other alloy steel: of silico-manganese steel
- 7229.90.05Wire of other alloy steel: other, of high-speed steel
- 7229.90.10Wire of other alloy steel: other, other, flat wire
- 7229.90.50Wire of other alloy steel: other, other, round wire
- 7229.90.90Wire of other alloy steel: other, other, other wire