8501.31 : d'une puissance n'excédant pas 750 W

Comparaison des droits de douane

UE 2,7 % Droit des pays tiers 1 ligne tarifaire Turquie 50 % Taux légal (loi n° 474) 4 lignes tarifaires États-Unis 2,4 % – 4 % Général (NPF) 5 lignes tarifaires · moyenne 3 % Royaume-Uni Exemption Droit des pays tiers 17 lignes tarifaires

Le tarif turc indique le taux légal fixé par la loi n° 474 sur le tarif douanier. Le taux appliqué à l’importation est fixé par la décision sur le régime d’importation : il peut être inférieur ou varier selon le pays d’origine.

1. 8501 31 00 d'une puissance n'excédant pas 750 W 2,7 %p/st

Cette ligne n’a pas de texte officiel en français ; elle est affichée dans la langue de son tarif.

1. 8501.31 Çıkış gücü 750 W.ı geçmeyenler:
2. 8501.31.00.10.11 Motorlar 50 %Adet
3. 8501.31.00.10.12 Jeneratörler 50 %Adet
4. 8501.31.00.90.11 Motorlar 50 %Adet
5. 8501.31.00.90.12 Jeneratörler 50 %Adet

Cette ligne n’a pas de texte officiel en français ; elle est affichée dans la langue de son tarif.

1. 8501.31 Of an output not exceeding 750 W:
2. 8501.31.20.00 Exceeding 37.5 W but not exceeding 74.6 W 2,8 %No.
3. 8501.31.40.00 Exceeding 74.6 W but not exceeding 735 W 4 %No.
4. 8501.31.50.00 Exceeding 735 W but under 746 W 3,3 %No.
5. 8501.31.60.00 Other 2,4 %No.
6. 8501.31.81.00 Generators 2,5 %No.

Spécial : taux réduits accordés au titre des accords commerciaux et des programmes préférentiels ; les lettres entre parenthèses désignent ces programmes (par exemple AU = accord de libre-échange avec l’Australie, KR = accord avec la Corée).

Cette ligne n’a pas de texte officiel en français ; elle est affichée dans la langue de son tarif.

1. 8501 31 00 00 Of an output not exceeding 750 w p/st
2. 8501 31 00 10 Motors of an output exceeding 735 w, dc generators, for use in civil aircraft Exemptionp/st
3. 8501 31 00 20 For use in certain types of aircraft Exemptionp/st
4. 8501 31 00 45 Dc motors, brushless, with:<br>- an external diameter of 90 mm or more, but not more than 110 mm,<br>- a rated speed of not more than 3 680 rpm,<br>- an output of 600 w or more but not more than 740 w at 2 300 rpm and at 80 °c,<br>- a supply voltage of 12 v,<br>- a torque of not more than 5.67 nm,<br>- a rotor position sensor,<br>- an electronic star-point relay, and<br>- for use with an electric power steering control module<br> Exemptionp/st
5. 8501 31 00 47 Motor for automotive electric seat adjustment applications: -with a shaft output on both motor sides, -consisting of a permanently excited dc motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 120 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car's seats Exemptionp/st
6. 8501 31 00 48 Brushless dc electric motors: <br>-with a rated power of 240 w or more, but not more than 260 w, <br>-with a voltage of 36 v or higher, but not higher than 52 v <br>-with a torque of 20 nm or more, but not more than 140 nm, <br>-with a housing made of aluminum, aluminum alloy or plastic, <br>-with or without a built-in controller, <br>-with a communication function in the lin or uart interface, <br>-weighing 1.5 kg or more, but not more than 5.0 kg, <br>-adapted for mounting in a bicycle frame <br>for use in the manufacture of e-bikes Exemptionp/st
7. 8501 31 00 49 Brushless dc electric motors:<br>- with a rated power of 240 w or more, but not more than 260 w,<br>- with a voltage of 24 v or higher, but not higher than 52 v,<br>- with a torque of 30 nm or more, but not more than 62 nm,<br>- with a lin, uart or can communication interface,<br>- with an internal planetary gearbox with fixed or variable ratio or direct drive,<br>- with a housing made of aluminum or aluminium alloy,<br>- with a weight of 1.5kg or more, but not more than 6kg,<br>- adapted for mounting in the front or rear bicycle wheel,<br>for use in the manufacture of e-bikes<br> Exemptionp/st
8. 8501 31 00 50 Dc motors, brushless, with: <br>- an external diameter of 80 mm or more, but not more than 200 mm,<br>- a supply voltage of 4 v or more, but not more than 16 v,<br>- an output at 20 °c of 200 w or more, but not more than 750 w,<br>- a torque at 20 °c of 2.00 nm or more, but not more than 7.00 nm,<br>- a rated speed at 20 °c of 600 rpm or more, but not more than 3 100 rpm,<br>- with or without a pulley,<br>- with or without an electronic power steering sensor/controller Exemptionp/st
9. 8501 31 00 52 Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 ph or type 303, 316l, 400 with:<br>-a three-phase winding,<br>-an output power not exceeding 280 w,<br>-a length with gearhead of 116.1 mm or more but not more than 117.2 mm,<br>-an external diameter of 13.86 mm or more but no more than 13.92 mm,<br>-a maximum torque of motor with gearhead 246.6 mnm in 25℃,<br>-a no-load radial speed of motor with gearhead with 9 900 rpm, at 24v in 25°c,<br>-a weight of motor with gearhead of 70.5 g or more but not more than 71.5 g, a resistance to peak temperature of 140°c or more (non-operating), a maximal air leak between shaft and shaft seals of 15 pa/s at given 2 bars of pressure,<br>-14 functional pins for power and control purpose,<br>-a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector<br>for use in the manufacture of medical devices with right-left rotation and oscillation function Exemptionp/st
10. 8501 31 00 54 Brushless dc electric motor, with:<br>-a rated voltage of 310 v,<br>-a rated power of 350 w or more but not more than 368 w,<br>-an input power of 500 w or more but not more than 550 w,<br>-output power of 350 w or more but not more than 400 w,<br>-an external diameter without bracket connector and pulley of 143.2 mm or more but not more than 143.8 mm,<br>-a rated speed of 16300 rpm or more but not more than 16500 rpm,<br>-a weight of 2.33 kg or more but not more than 2.40 kg,<br>-a pulley <br> Exemptionp/st
11. 8501 31 00 55 Dc motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:<br>-an external diameter of 24.2 mm or more, but not more than 140 mm,<br>-a rated speed of 3300 rpm or more, but not more than 26200 rpm,<br>-a rated supply voltage of 3.6 v or more, but not more than 230 v,<br>-an output power of more than 37.5 w , but not more than 2400 w,<br>-a free load current of not more than 20.1 a,<br>-a maximum efficiency of 50% or more, Exemptionp/st
12. 8501 31 00 56 Dc motor, brushless, integrated with an electronic control unit (ecu), defined as a power pack with:<br>-a safety feature and mechanism designed for prevention of critical hazards like self-steer by single failure,<br>-a can-communication interface,<br>-an external sensor interface,<br>-operating temperature range of -40℃ to 95℃ or broader,<br>-compliance with standard ip6k9k for water and dustproofness,<br>-supply voltage of 9 v or more, but not more than 16 v,<br>-rated power output of 500 w or more, but not higher than 750 w,<br>-rated torque of 3 nm or more, but not more than 6 nm,<br>-length of 150 mm or more, but not more than 250 mm,<br>-width of 100 mm or more, but not more than 150 mm,<br>-height of 80 mm or more, but not more than 120 mm<br> Exemptionp/st
13. 8501 31 00 57 Brushless dc electric motor with lcd control indicator and/or control unit with buttons:<br>-with an output power of 200 w or more, but not more than 700 w,<br>-with a supply voltage of 30 v or more, but not more than 60 v,<br>-with a torque of 30 nm or more, but not more than 200 nm,<br>-with a height of 117 mm or more, but not more than 146 mm,<br>-with a length of 117 mm or more, but not more than 223 mm,<br>-with a width of 135 mm or more, but not more than 190 mm,<br>-with a weight of 2 kg or more but not more than 5 kg,<br>-designed to be mounted in a frame, front or rear bicycle wheel,<br>-equipped with sockets, at least for cable connection with lcd control indicator,<br>for use in the manufacture of electric bicycles Exemptionp/st
14. 8501 31 00 58 Permanently excited dc motor with:<br>-an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,<br>-a rated speed of not more than 25 000 rpm,<br>-an output of 45 w or more but not more than 400 w, and<br>-a supply voltage of 9 v or more but not more than 50 v,<br>-whether or not a multiple-phase winding,<br>-whether or not with a drive disc,<br>-whether or not with a crankcase,<br>-whether or not with a fan,<br>-whether or not with a cap assembly,<br>-whether or not with a sun gear,<br>-whether or not with a speed and rotational direction encoder,<br>-whether or not with or without a speed or rotational direction sensor of resolver type or hall effect type,<br>-whether or not with a mounting flange<br>for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture <br> Exemptionp/st
15. 8501 31 00 63 Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:<br>- a specified speed of not more than 6000rpm,<br>- a minimum output of 400w, but not more than 1.3kw (at 12 v), or with a minimum output of 750w but not more than 1.55kw (at 36 v),<br>- a flange diameter of 85mm or more but not more than 200mm,<br>- a maximum length of 335mm, measured from the beginning of the shaft to the outer ending,<br>- a housing length of not more than 265mm, measured from the flange to the outer ending,<br>- a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease),<br>- a stator with single t-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and<br>- surface magnets,<br>- whether or not with electronic power steering controller,<br>- whether or not with pulley or coupling,<br>- whether or not with rotor position sensor<br> Exemptionp/st
16. 8501 31 00 68 Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:<br>-a length of 110 mm or more but not more than 140 mm,<br>-a width of 90 mm or more but not more than 130 mm,<br>-a height of 80 mm or more but not more than 110 mm<br>for use in the manufacture of engines of motor vehicles Exemptionp/st
17. 8501 31 00 85 Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:<br>- a dc motor of an output not exceeding 600 w,<br>- for usage with a supply voltage of 8 v or more but no more than 48 v,<br>- with motor connection (plug-in connection),<br>- whether or not with position sensor,<br>- whether or not with integrated control and power electronics,<br>- whether or not with spring mechanism for resetting the lever,<br>- built in a housing with reduction gear and lever attached to the motor drive shaft, or<br>- built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod<br> Exemptionp/st
18. 8501 31 00 99 Other Exemptionp/st

Commerce mondial en 2024

Principaux exportateurs

Rang	Pays	Valeur	Part
1	Chine	3,9 Md $US	27,7 %
2	Allemagne	1,5 Md $US	10,4 %
3	Mexique	1,1 Md $US	7,6 %
4	Hongrie	962,4 M $US	6,9 %
5	Japon	952,8 M $US	6,8 %
6	États-Unis	832,6 M $US	6 %
7	Corée du Sud	566,4 M $US	4 %
8	Italie	339,3 M $US	2,4 %
9	Pologne	320,2 M $US	2,3 %
10	Viêt Nam	264,3 M $US	1,9 %

Principaux importateurs

Rang	Pays	Valeur	Part
1	États-Unis	2,7 Md $US	19,2 %
2	Allemagne	1,6 Md $US	11,2 %
3	Mexique	893 M $US	6,4 %
4	Chine	717,7 M $US	5,1 %
5	Japon	567,5 M $US	4,1 %
6	Pologne	460 M $US	3,3 %
7	France	382,3 M $US	2,7 %
8	Corée du Sud	365,1 M $US	2,6 %
9	Tchéquie	362,7 M $US	2,6 %
10	Thaïlande	357,4 M $US	2,6 %

Questions fréquentes