Gümrük vergisine eklenen yükler ve eşyanın sınırda karşılaması gereken kurallar.
Ek vergiler ve ücretler 16
Vergi askıya almaAskıya alma – belirli gemi, tekne ve diğer deniz taşıtları ile sondaj veya üretim platformlarına yönelik eşyaMuaf
Uygulandığı menşe
tüm ülkeler
Hukuki dayanak
Regulation 2658/87
Belgeler
C990 Gemiler ve platformlar için nihai kullanım izni ((AB) 2015/2446 sayılı Yetki Devrine Dayanan Tüzük Ek A, Sütun 8c)
Vergi askıya almaUçuşa elverişlilik kapsamında tarife askıya almaMuaf
Uygulandığı menşe
tüm ülkeler
Hukuki dayanak
Regulation 1517/18
Belgeler
C119 Yetkili Serbest Bırakma Sertifikası — EASA Form 1 ((AB) 748/2012 sayılı Tüzük Ek I'in Ek I'i) veya eşdeğer sertifika
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 05 Poly(ethylene terephthalate) film in rolls: -|with a thickness of 0,335|mm or more but not more than 0,365|mm, and -|coated with a gold layer with a|thickness of 0,03|μm or more but not more than 0,06|μm
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 2605/25
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 08 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 2605/25
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 28 Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 2605/25
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 32 Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 2605/25
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 38 Poly(ethylene terephthalate) film, of a thickness of not more than 12|µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35|nm
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 2605/25
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 48 Sheets or rolls of poly(ethylene terephthalate): -|coated on both sides with a layer of epoxy acrylic resin, -|of a total thickness of 37|μm (±|3|μm)
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 2605/25
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 52 Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257|method)
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 2605/25
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 60 Poly (ethylene terephtalate) film: -|of a thickness of not more than 20|µm, -|coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 2605/25
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 70 Poly(ethylene terephthalate) film in rolls with: -a thickness of 35 μm or more, but not more than 75 μm, -a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD), -an elongation at break of 400 % or more in MD and 30 % or more in TD, -a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %, -a dynamic heat shrinkage (between 55 °C and 70 °C) in TD of not more than 20 percentage points, -a light transmittance of 85 % or more, -a haze ratio of not more than 6 %, -a surface tension of 38 mN/m or more, -a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³, -a shelf life declared by the manufacturer of not less than 12 months
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 1463/26
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 79 Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 2605/25
Vergi askıya almaÖzerk tarife askıya almaMuaf
Yalnızca
3920 62 19 85 Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: -a total thickness of 300 µm or more, but not more than 330 µm, -a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882), -a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes, -a low water vapor permeability of 2,5 g/m²•d or less, and -a high breakdown voltage of 18 kV or more and -a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules
Uygulandığı menşe
Belarus, Rusya dışındaki tüm ülkeler
Hukuki dayanak
Regulation 2605/25
Düşük değerli gönderi vergisiDüşük değerli gönderilere uygulanan gümrük vergisi3 EUR
Uygulandığı menşe
tüm ülkeler
Geçerlilik
31 Ekim 2026 tarihine kadar
Hukuki dayanak
Regulation 0382/26
Düşük değerli gönderi vergisiDüşük değerli gönderilere uygulanan gümrük vergisi3 EUR
Y727 (AB) 765/2006 sayılı Konsey Tüzüğü madde 1ra fıkra 1'de tanımlanan yasaklar uygulanmaz (bkz. madde 1ra fıkra 3'teki istisnalar)
Y728 (AB) 765/2006 sayılı Konsey Tüzüğü madde 1ra fıkra 1'de tanımlanan yasaklar uygulanmaz (bkz. madde 1ra fıkra 4'teki istisnalar)
L152 (AB) 765/2006 sayılı Konsey Tüzüğü madde 1ra fıkra 10 uyarınca ithalat izni
Y870 Söz konusu yaptırımın yürürlüğe giriş veya uygulanma tarihinden (hangisi daha sonra ise) önce AB gümrük birliği topraklarına girmiş ve gümrük makamlarına sunulmuş eşya (bkz. (AB) 765/2006 sayılı Tüzük madde 8f)
Y997 Kırım veya Sivastopol menşeli olmayan ya da bu bölgelere gönderilmeyen eşya ((AB) 692/2014 sayılı Konsey Tüzüğü madde 2 ve 2b.1)
N864 Herhangi bir ihracatçı tarafından fatura veya başka bir ticari belge üzerinde düzenlenen fatura beyanı veya menşe beyanı
L142 (AB) 833/2014 sayılı Konsey Tüzüğü madde 3i fıkra 3c uyarınca ithalat izni
Y874 (AB) 833/2014 sayılı Konsey Tüzüğü madde 3i.1'de tanımlanan yasaklar uygulanmaz (bkz. madde 3i.3aa'daki istisnalar)
L143 (AB) 833/2014 sayılı Konsey Tüzüğü madde 12b.2 uyarınca ithalat izni
Y859 Söz konusu yaptırımın yürürlüğe giriş veya uygulanma tarihinden (hangisi daha sonra ise) önce AB gümrük birliği topraklarına girmiş ve gümrük makamlarına sunulmuş eşya (bkz. (AB) 833/2014 sayılı Tüzük madde 12e)
İthalat denetimiİthalat kontrolü
Uygulandığı menşe
Ukrayna
Hukuki dayanak
Regulation 0263/22
Belgeler
Y984 Ukrayna'nın Donetsk, Herson, Luhansk ve Zaporijya oblastlarındaki hükümet kontrolü dışındaki bölgelerinden menşe almayan veya bu bölgelere gönderilmeyen eşya
N864 Herhangi bir ihracatçı tarafından fatura veya başka bir ticari belge üzerinde düzenlenen fatura beyanı veya menşe beyanı
TARIC alt kırılımları
Eşyaya uyan 10 haneli TARIC kodunu beyan edin: önlemler alt kırılımlar arasında farklı olabilir.
3920 62 19 05
Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm
3920 62 19 08
Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: - only dyed in the mass, or - dyed in the mass and metallised on one side
3920 62 19 28
Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites
3920 62 19 32
Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm
3920 62 19 38
Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm
3920 62 19 48
Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 μm (± 3 μm)
3920 62 19 52
Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257 method)
3920 62 19 60
Poly (ethylene terephtalate) film: - of a thickness of not more than 20 µm, - coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm
3920 62 19 70
Poly(ethylene terephthalate) film in rolls with: -a thickness of 35 μm or more, but not more than 75 μm, -a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD), -an elongation at break of 400 % or more in MD and 30 % or more in TD, -a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %, -a dynamic heat shrinkage (between 55 °C and 70 °C) in TD of not more than 20 percentage points, -a light transmittance of 85 % or more, -a haze ratio of not more than 6 %, -a surface tension of 38 mN/m or more, -a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³, -a shelf life declared by the manufacturer of not less than 12 months
3920 62 19 79
Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm
3920 62 19 85
Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: -a total thickness of 300 µm or more, but not more than 330 µm, -a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882), -a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes, -a low water vapor permeability of 2,5 g/m²•d or less, and -a high breakdown voltage of 18 kV or more and -a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules
3920 62 19 99
Other
İhracat önlemleri 2
Bu eşya AB’den çıkarken uygulanan yasaklar, lisanslar, kontroller ve yaptırımlar.
İhracat önlemleri
Varış yeri
Hukuki dayanak
Geçerlilik
Export controlYaptırım rejimi: Russia
Rusya
Regulation 0833/14
24 Nisan 2026
Export controlYaptırım rejimi: Belarus
Belarus
Regulation 0765/06
25 Şubat 2025
TARIC verisi: 26 Ekim 2026
AB üye devletlerinde ithalat KDV’si
Her üye devletin bu koddaki eşyaya uyguladığı oran (Komisyonun Taxes in Europe veritabanından). İndirimli oran bir kodun yalnızca bazı eşyalarını kapsayabilir; ulusal KDV mevzuatını kontrol edin.
Almanya%19
Avusturya%0 indirimli oran
Belçika%21
Bulgaristan%20
Çekya%21
Danimarka%25
Estonya%9 indirimli oran
Finlandiya%25,5
Fransa%20
Hırvatistan%25
Hollanda%21
İrlanda%23
İspanya%21
İsveç%25
İtalya%22
Kıbrıs%19
Letonya%21
Litvanya%21
Lüksemburg%17
Macaristan%27
Malta%18
Polonya%23
Portekiz%23
Romanya%21
Slovakya%23
Slovenya%22
Yunanistan%24
TEDB · 26 Ekim 2026
Ülkelere göre tercihli oranlar
Anlaşma veya rejim
Ülkeler
Oran
standart oran (anlaşma yok)
—
%6,5
GTS-EBA (En az gelişmiş ülkelere yönelik özel düzenleme – Silah Dışında Her Şey)
Afganistan, Angola, Bangladeş, Benin ve 42 ülke daha
Bir tarafta Avrupa Toplulukları ve üye devletleri ile diğer tarafta Fas Krallığı arasında bir ortaklık kuran Avrupa-Akdeniz Anlaşması'nın 1 ve 4 No'lu Protokollerinin değiştirilmesine ilişkin, Avrupa Birliği ile Fas Krallığı arasında mektup teatisi şeklindeki Anlaşma uyarınca tercihli menşe
ABD Gümrük ve Sınır Koruma Teşkilatı (CROSS) ve İngiltere vergi idaresi HMRC (Advance Tariff Rulings) tarafından bu koda giren eşya için verilmiş kararlar. Karar yalnızca sahibini bağlar, ama idarelerin benzer eşyayı nasıl sınıflandırdığını gösterir. Eşya tanımları idarelerin kendi İngilizce metinleridir.
The tariff classification of metallized polyethylene terephthalate (PET) film from China
600013389HMRC8 Eylül 2025 – 7 Eylül 2028 · 3920 62 90 90
Goods are used as electromagnetic interference (EMI) shielding Polycarbonate (Polyethylene terephthalate) sheet incorporating a fine woven copper wire mesh acting as an embedded conductive grid. The goods works as a shield to any EMI passively dissipating any electromagnetic threat. Machine cut to…
600012462HMRC31 Mart 2025 – 30 Mart 2028 · 3920 62 19 52
Product is a polyethylene terephthalate (polyester) film with gold metal. It is a miscellaneous manufactured article which is then used, along with others, in the manufacture of blood glucose testing strips. Product is made from a 170-180µm thick polyester film and coated on one side only with a…
600012463HMRC19 Mart 2025 – 18 Mart 2028 · 3920 62 19 52
The Palladium Film is a miscellaneous article, manufactured from polyester film and metal and used, along with others, in the manufacture of blood glucose testing strips. It is comprised of a 170-180 micrometre thick polyester film. The product is presented in 613-630m rolls, coated on one side…
600011831HMRC10 Ocak 2025 – 9 Ocak 2028 · 3920 62 19 99
polyethylene terephthalate film coated with silicone between 12 and 160 microns in thickness, silicone coating between 0.2 and 5 microns Packaging - in reels or coils down to 14mm wide
Avrupa Komisyonu'nun bu KN kodlarında eşyanın nasıl sınıflandırılacağına dair açıklayıcı notları. Hukuken bağlayıcı değildir ama gümrük idareleri bunlara uyar; Dünya Gümrük Örgütü'nün HS İzahnamelerini tamamlar. Türkçe resmî metni olmadığı için İngilizce gösterilir.
3920 · Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
See note 10 to this chapter.
This heading does not include strip of an apparent width not exceeding 5 mm (Chapter 54).
This heading includes ‘stone paper’ consisting of rock powder (approx. 80 % by weight of calcium carbonate) and plastic (approx. 20 % by weight of plastic resin) where the plastic gives the product its essential character because of its flexibility as the rock powder acts only as a filler material. Stone paper is a paper-like material that can be processed like paper (i.e. through printing, cutting, folding and affixing) as it has a density range similar to paper made from cellulose. It is suitable for instance for stationery, bags, packaging, adhesives, grease proof paper, wrappers and containers.
Fasla ilişkin genel notlar
PLASTICS AND ARTICLES THEREOF
General
The HS Explanatory Note to Chapter 39, General, ‘Combinations of plastics and materials other than textiles’, point (d), applies, mutatis mutandis, to combinations of carbon fibres and plastics.
Note 4
Calculation of mass ratios of monomer units in copolymers:
The mass ratios of the respective monomer units in copolymer chains are calculated based on the molecular structure of the copolymer (not the starting materials), taking into account the formation reaction of the polymer. When applicable, the atom linking two adjacent monomer units is attributed to the monomer unit from which the atom originates.
The following examples illustrate the calculation of the monomer unit content in copolymers:
In poly(ethylene terephthalate), which is a polyester comprised of terephthalic acid and ethylene glycol moieties, both alcoholic oxygens are attributed to the glycol monomer unit. Hence, ethylene glycol is calculated as C2H4O2, and terephthalate is calculated as C8H4O2.
In polyamide-6,6, which is a polyamide comprised of hexamethylenediamine and adipic acid, both nitrogen atoms are attributed to the diamine monomer unit. Hence, hexamethylenediamine is calculated as C6H14N2 and adipic acid is calculated as C6H8O2.
Note 6
The term ‘solutions’, used both in this note and in note 4 to Chapter 32, does not apply to colloidal solutions.
For the definition of the term ‘primary forms’, see note 6 to this chapter and the HS General Explanatory Note to this chapter, ‘Primary Forms’.
Her yılın Resmî Gazete’de yayımlanan Kombine Nomenklatürü: tanım, üçüncü ülke vergisi ve tamamlayıcı birim.
Yıl
Tanım
Üçüncü ülke vergisi
İlave ölçü birimi
2026
Diğerleri
%6,5
—
2025
aynı
%6,5
—
2024
aynı
%6,5
—
2023
aynı
%6,5
—
2022
aynı
%6,5
—
2021
aynı
%6,5
—
2020
aynı
%6,5
—
2019
Other
%6,5
—
AB Kombine Nomenklatürü, 3920.62 alt pozisyonunu 3 pozisyona ayırır; 3920 62 19 bunlardan biridir.
Üçüncü ülke vergisi %6,5; miktar — olarak beyan edilir.
152 ülkeden gelen eşya AB’ye %6,5 yerine tercihli oranla girebilir; bunların 140 tanesinde hiç vergi ödenmez (ör. GTS-EBA, CARIFORUM).
Ağustos 2026 dönemine kadarki 12 ayda AB bu eşyadan €796,2 Mn değerinde ithalat yaptı; bir önceki 12 aya göre düşüş %4; ortalama fiyat kg başına €2,38. En büyük tedarikçi %22 payla Türkiye.
Aynı alt pozisyon için Türkiye vergisi %0–%6,5, ABD vergisi %4,2, Birleşik Krallık vergisi %6, Kanada vergisi vergisiz, Meksika vergisi %18–%25, Brezilya vergisi %0–%14,4, Arjantin vergisi %0–%16, Peru vergisi vergisiz, Yeni Zelanda vergisi %0–%5, Japonya vergisi %4,8, Tayvan vergisi %0–%5, KİK vergisi %5, İsviçre vergisi vergisiz, Norveç vergisi vergisiz, Kuzey Makedonya vergisi vergisiz ve Nijerya vergisi %10.
AB üye ülkeleri 2024 yılında 3920.62 alt pozisyonunda $2 Mr değerinde ithalat yaptı; AB dışından en büyük tedarikçi Türkiye oldu, Türkiye $174 Mn ile 1. sıradaydı.
Sık sorulan sorular
3920 62 19 KN kodu için gümrük vergisi ne kadar?
AB Kombine Nomenklatürü’nde üçüncü ülke vergisi %6,5; ilave ölçü birimi —. Anlaşma ülkelerine tanınan tercihli oranlar, anti-damping vergileri ve KDV bu orana dahil değildir.
3920 62 19 için hangi ülkelere daha düşük oran uygulanır?
152 ülkenin bu pozisyonda tercihli oranı var; 140 tanesinde oran sıfır (GTS-EBA, CARIFORUM, Denizaşırı Ülke ve Topraklar ve diğerleri). Oran yalnızca anlaşmanın menşe kurallarını karşılayan ve menşe ispat belgesi bulunan eşyaya uygulanır. Sayfada menşe ülkeyi seçerek oranı görebilirsiniz.
Türkiye menşeli eşya AB’ye bu vergiyle mi girer?
Gümrük Birliği kapsamındaki sanayi ürünleri A.TR dolaşım belgesiyle AB’ye gümrük vergisi ödemeden girebilir. Tarım ürünleri ve AKÇT ürünleri için ayrı tercihli rejimler uygulanır.
AB üye ülkeleri bu ürünü Türkiye’den ne kadar ithal ediyor?
3920.62 alt pozisyonunun tamamında 2024 yılında Türkiye $174 Mn ile tedarikçiler arasında 1. sıradaydı.
Tarifbase, sitenin nasıl kullanıldığını görüp geliştirebilmek için Google Analytics ve Yandex Metrica çerezleri kullanır. Kapatmak için “Reddet”i seçin. Gizlilik politikası