Norveç Gümrük Tarifesi
Norveç Gümrük Tarifesi, 72. fasıl: Demir ve çelik
- 169Tarife pozisyonları
- MuafOran
Norveç Gümrük Tarifesi’nde 72. fasıl 29 pozisyon altında 169 tarife pozisyonu içerir.
Oranlar vergisiz; 169 pozisyonda vergi yok.
7202 pozisyonu (ferro -alyajlar) 15 pozisyona ayrılarak faslın en ayrıntılı bölümünü oluşturur.
En sık görülen oran sıfır; 169 pozisyonda uygulanır.
7201 Dökme demir (pik demir) ve aynalı demir (kütle, külçe, blok veya diğer ilk şekillerde)
7202 Ferro -alyajlar
- 7202.11.00Containing by weight more than 2 % of carbon
- 7202.19.00Ferro-alloys, other
- 7202.21.00Containing by weight more than 55 % of silicon
- 7202.29.00Ferro-alloys, other
- 7202.30.00Ferro-alloys, ferro-silico-manganese
- 7202.41.00Containing by weight more than 4 % of carbon
- 7202.49.00Ferro-alloys, ferro-silico-manganese, other
- 7202.50.00Ferro-alloys, ferro-silico-chromium
- 7202.60.00Ferro-alloys, ferro-nickel
- 7202.70.00Ferro-alloys, ferro-molybdenum
- 7202.80.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten
- 7202.91.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-titanium and ferro-silico-titanium
- 7202.92.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-vanadium
- 7202.93.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-niobium
- 7202.99.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other
7203 Demir cevherinin doğrudan indirgenmesi ile elde edilen demirli ürünler ve diğer sünger görünüşlü demirli ürünler (parça, pellet veya benzeri şekillerde); minimum saflığı ağırlık itibariyle % 99,94 olan demir (parça, pellet veya benzeri şekillerde)
7204 Dökme demirin, demirin veya çeliğin döküntü ve hurdaları; demir veya çelik döküntü ve hurdalarının yeniden ergitilmesi suretiyle elde edilen külçeler
- 7204.10.00Waste and scrap of cast iron
- 7204.21.00Waste and scrap of cast iron: of stainless steel
- 7204.29.00Waste and scrap of cast iron: other
- 7204.30.00Waste and scrap of tinned iron or steel
- 7204.41.00Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
- 7204.49.00Waste and scrap of tinned iron or steel: other
- 7204.50.00Ferrous waste and scrap: remelting scrap ingots
7205 Dökme demir, aynalı demir, demir veya çelikten granül ve tozlar
7206 Külçe veya diğer ilk şekillerde demir ve alaşımsız çelik (72.03 pozisyonuna giren demir hariç)
7207 Demir veya alaşımsız çelikten yarı mamuller
7208 Demir veya alaşımsız çelikten yassı hadde ürünleri (genişlikleri 600 mm veya daha fazla) (sıcak haddelenmiş) (kaplanmamış)
- 7208.10.00In coils, not further worked than hot-rolled, with patterns in relief
- 7208.25.00Of a thickness of 4.75 mm or more
- 7208.26.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27.00Of a thickness of less than 3 mm
- 7208.36.00Of a thickness exceeding 10 mm
- 7208.37.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.38.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.39.00Of a thickness of less than 3 mm
- 7208.40.00Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.51.00Of a thickness exceeding 10 mm
- 7208.52.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.53.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54.00Of a thickness of less than 3 mm
- 7208.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7209 Demir veya alaşımsız çelikten yassı hadde mamulleri (genişliği 600 mm. veya daha fazla, soğuk haddelenmiş, kaplanmamış)
- 7209.15.00Of a thickness of 3 mm or more
- 7209.16.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.17.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.18.00Of a thickness of less than 0.5 mm
- 7209.25.00Of a thickness of 3 mm or more
- 7209.26.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.27.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.28.00Of a thickness of less than 0.5 mm
- 7209.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7210 Demir veya alaşımsız çelikten yassı hadde mamulleri, genişliği 600 mm veya daha fazla olanlar (kaplanmış olanlar)
- 7210.11.00Of a thickness of 0.5 mm or more
- 7210.12.00Of a thickness of less than 0.5 mm
- 7210.20.00Plated or coated with lead, including terne-plate
- 7210.30.00Electrolytically plated or coated with zinc
- 7210.41.00Electrolytically plated or coated with zinc: corrugated
- 7210.49.00Electrolytically plated or coated with zinc: other
- 7210.50.00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61.00Plated or coated with aluminium-zinc alloys
- 7210.69.00Plated or coated with chromium oxides or with chromium: other
- 7210.70.00Painted, varnished or coated with plastics
- 7210.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7211 Demir ve alaşımsız çelikten yassı hadde mamulleri (genişlikleri 600 mm.den az ve kaplanmamış olanlar)
- 7211.13.00Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- 7211.14.00Other, of a thickness of 4.75 mm or more
- 7211.19.00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211.23.00Containing by weight less than 0.25 % of carbon
- 7211.29.00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7212 Demir veya alaşımsız çelikten yassı hadde ürünleri (genişlikleri 600 mm.den az ve kaplanmış olanlar)
7213 Demir veya alaşımsız çelikten filmaşin (sıcak haddelenmiş, kangal halinde)
7214 Demir veya alaşımsız çelikten çubuklar (sadece dövülmüş, sıcak haddelenmiş veya sıcak çekilmiş, haddeleme işleminden sonra burulmuş olanIar dahil)
- 7214.10.00Other bars and rods of iron or non-alloy steel, not further: forged
- 7214.20.00Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
- 7214.30.00Other, of free-cutting steel
- 7214.91.00Of rectangular (other than square) cross-section
- 7214.99.00Other, of free-cutting steel: other
7215 Demir veya alaşımsız çelikten diğer çubukIar
7216 Demir veya alaşımsız çelikten profiller
- 7216.10.00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.21.00U, I or H sections, not further worked than hot-rolled: l sections
- 7216.22.00U, I or H sections, not further worked than hot-rolled: t sections
- 7216.31.00U, I or H sections, not further worked than hot-rolled: u sections
- 7216.32.00U, I or H sections, not further worked than hot-rolled: i sections
- 7216.33.00U, I or H sections, not further worked than hot-rolled: h sections
- 7216.40.00L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
- 7216.50.00Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
- 7216.61.00Obtained from flat-rolled products
- 7216.69.00Other angles, shapes and sections, not further worked than: other
- 7216.91.00Cold-formed or cold-finished from flat-rolled products
- 7216.99.00Other angles, shapes and sections, not further worked than: other
7217 Demir veya alaşımsız çelikten teller
7218 Külçe veya diğer ilk şekillerde paslanmaz çeIik; paslanmaz çelikten yarı mamuller
7219 Paslanmaz çelikten yassı hadde mamulleri (genişliği 600 mm. veya fazla olanlar
- 7219.11.00Of a thickness exceeding 10 mm
- 7219.12.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.00Of a thickness of less than 3 mm
- 7219.21.00Of a thickness exceeding 10 mm
- 7219.22.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.00Of a thickness of less than 3 mm
- 7219.31.00Of a thickness of 4.75 mm or more
- 7219.32.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.33.00Of a thickness exceeding 1 mm but less than 3 mm
- 7219.34.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7219.35.00Of a thickness of less than 0.5 mm
- 7219.90.00Flat-rolled products of stainless steel, of a width of 600: other
7220 Paslanmaz çelikten yassı hadde mamulleri (genişliği 600 mm. den az olanlar)
7221 Paslanmaz çelikten filmaşin (sıcak haddelenmiş, kangal halinde)
7222 Paslanmaz çelikten çubuk ve profiller
7223 Paslanmaz çelikten teller
7224 Külçe veya diğer ilk şekillerde diğer alaşımlı çelikler; diğer alaşımlı çelikten yarı mamuller
7225 Diğer alaşımlı çelikten yassı hadde mamulleri (genişliği 600 mm.veya daha fazla)
- 7225.11.00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7225.19.00Flat-rolled products of other alloy steel, of a width: other
- 7225.30.00Other, not further worked than hot-rolled, in coils
- 7225.40.00Other, not further worked than hot-rolled, not in coils
- 7225.50.00Other, not further worked than cold-rolled (cold-reduced)
- 7225.91.00Electrolytically plated or coated with zinc
- 7225.92.00Otherwise plated or coated with zinc
- 7225.99.00Other, not further worked than cold-rolled (cold-reduced): other
7226 Diğer alaşımlı çelikten yassı hadde mamulleri (genişliği 600 mm. den az olanlar)
- 7226.11.00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7226.19.00Flat-rolled products of other alloy steel, of a width: other
- 7226.20.00Of high speed steel
- 7226.91.00Not further worked than hot-rolled
- 7226.92.00Not further worked than cold-rolled (cold-reduced)
- 7226.99.00Of high speed steel: other
7227 Diğer alaşımlı çelikten filmaşin (sıcak haddelenmiş, kangal halinde)
7228 Diğer alaşımlı çelikten çubuk ve profiller; alaşımlı veya alaşımsız çelikten sondaj işlerinde kullanılan içi boş çubuklar
- 7228.10.00Bars and rods, of high speed steel
- 7228.20.00Bars and rods, of silico-manganese steel
- 7228.30.00Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
- 7228.40.00Other bars and rods, not further worked than forged
- 7228.50.00Other bars and rods, not further worked than cold-formed or cold-finished
- 7228.60.00Other bars and rods
- 7228.70.00Angles, shapes and sections
- 7228.80.10Of alloy steel or high carbon steel
- 7228.80.90Hollow drill bars and rods: other