Birleşik Krallık Gümrük Tarifesi · eşya kodu · HS 8708.50
8708 50 55 91: Diferansiyelli akslar ve taşıyıcı akslar: Specific pre-assembled or ready-to assemble sections for new mobile cranes
Diferansiyelli akslar ve taşıyıcı akslar
✓ Gümrük beyannamesinde kullanılabilir Veri: Birleşik Krallık Gümrük Tarifesi · kontrol 24 Ekim 2026
Bu satırın Türkçe resmî metni yok; kendi tarifesinin dilinde gösteriliyor.
- 8708 Parts and accessories of the motor vehicles of headings 8701 to 8705
- 8708 50 00 00 Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof
- Other
- Parts
- 8708 50 55 00 Of closed-die forged steel
- Other
- 8708 50 55 91 Specific pre-assembled or ready-to assemble sections for new mobile cranes
Ne ödersiniz
İthalat: Birleşik Krallık
Ek vergiler ve ithalat kuralları
Gümrük vergisine eklenen yükler ve eşyanın sınırda karşılaması gereken kurallar.
Ek vergiler ve ücretler 1
- İlave gümrük vergisiEk vergiler %35
- Uygulandığı menşe
- Belarus, Rusya
- Hukuki dayanak
- 2022 No. 598
- Belgeler
- 9014
İthalat şartları 5
- Yasak veya kısıtlamaİthalat yasağı
- Uygulandığı menşe
- Kuzey Kore
- Hukuki dayanak
- S.I. 2019/411
- İthalat denetimiSerbest dolaşıma girişte kısıtlama
- Uygulandığı menşe
- Belarus, Irak, Rusya, Suriye, Ukrayna
- Hukuki dayanak
- 2022 No. 748, S.I. 2020/707, S.I. 2019/792, S.I. 2022/395
- Belgeler
- 9024
- 9032
- 9025
- 9009
- 9010
- 9017
- İthalat denetimiSerbest dolaşıma girişte kısıtlama
- Uygulandığı menşe
- tüm ülkeler
- Hukuki dayanak
- S.I. 2019/583
- Belgeler
- L100 Komisyon tarafından düzenlenen "kontrole tabi maddeler" (ozon) ithalat lisansı
- Y902
- 9Y06
- İthalat denetimiKısıtlamaya tabi eşya ve teknolojilere ilişkin ithalat kontrolü
- Uygulandığı menşe
- İran, Libya, Rusya
- Hukuki dayanak
- S.I. 2019/461, 2020 No. 1665, S.I. 2019/855
- İthalat denetimiLüks eşyaya ilişkin ithalat kontrolü
- Uygulandığı menşe
- Kuzey Kore
- Hukuki dayanak
- S.I. 2019/411
- Belgeler
- Y945 Yolcuların bagajında bulunan kişisel eşyaları veya yolcuların kişisel kullanımına yönelik ticari nitelikte olmayan eşya ((AB) 2017/1509 sayılı Tüzük madde 10.2)
- Y946 Üye devletlerin DPRK'deki diplomatik veya konsüler temsilciliklerinin ya da uluslararası hukuk uyarınca dokunulmazlıklardan yararlanan uluslararası kuruluşların resmî amaçları için gerekli eşya veya bunların personelinin kişisel eşyaları ((AB) 2017/1509 sayılı Tüzük madde 10.3)
- Y948 (AB) 2017/1509 sayılı Tüzük Ek VIII'de (Lüks eşya) tanımlananlar dışındaki eşya
Ülkelere göre tercihli oranlar
| Anlaşma veya rejim | Ülkeler | Oran |
|---|---|---|
| standart oran (anlaşma yok) | — | %4 |
| DCTS Comprehensive | Afganistan, Angola, Bangladeş, Benin ve 38 ülke dahaAfganistan, Angola, Bangladeş, Benin, Burkina Faso, Burundi, Butan, Cibuti, Çad, Eritre, Etiyopya, Gambiya, Gine, Gine-Bissau, Güney Sudan, Haiti, Kamboçya, Kiribati, Komorlar, Kongo - Kinşasa, Laos, Liberya, Malavi, Mali, Moritanya, Myanmar (Burma), Nepal, Nijer, Orta Afrika Cumhuriyeti, Ruanda, Sao Tome ve Principe, Senegal, Sierra Leone, Somali, Sudan, Tanzanya, Timor-Leste, Togo, Tuvalu, Uganda, Yemen, Zambiya | Muaf |
| European Union (including code "EU") | Almanya, Avusturya, Belçika, Bulgaristan ve 23 ülke dahaAlmanya, Avusturya, Belçika, Bulgaristan, Çekya, Danimarka, Estonya, Finlandiya, Fransa, Hırvatistan, Hollanda, İrlanda, İspanya, İsveç, İtalya, Kıbrıs, Letonya, Litvanya, Lüksemburg, Macaristan, Malta, Polonya, Portekiz, Romanya, Slovakya, Slovenya, Yunanistan | Muaf |
| DCTS Enhanced | Bolivya, Cabo Verde, Cezayir, Cook Adaları ve 13 ülke dahaBolivya, Cabo Verde, Cezayir, Cook Adaları, Filipinler, Kırgızistan, Kongo - Brazavil, Mikronezya, Moğolistan, Nijerya, Niue, Özbekistan, Pakistan, Sri Lanka, Suriye, Tacikistan, Vanuatu | Muaf |
| CARIFORUM | Antigua ve Barbuda, Bahamalar, Barbados, Belize ve 10 ülke dahaAntigua ve Barbuda, Bahamalar, Barbados, Belize, Dominik Cumhuriyeti, Dominika, Grenada, Guyana, Jamaika, Saint Kitts ve Nevis, Saint Lucia, Saint Vincent ve Grenadinler, Surinam, Trinidad ve Tobago | Muaf |
| Denizaşırı Ülke ve Topraklar (OCT) | Anguilla, Bermuda, Britanya Hint Okyanusu Toprakları, Britanya Virjin Adaları ve 7 ülke dahaAnguilla, Bermuda, Britanya Hint Okyanusu Toprakları, Britanya Virjin Adaları, Cayman Adaları, Falkland Adaları, Güney Georgia ve Güney Sandwich Adaları, Montserrat, Pitcairn Adaları, Saint Helena, Turks ve Caicos Adaları | Muaf |
| Orta Amerika | El Salvador, Guatemala, Honduras, Kosta Rika, Nikaragua, Panama | Muaf |
| SADC Ekonomik Ortaklık Anlaşması (EPA) | Botsvana, Esvatini, Lesotho, Mozambik, Namibya | Muaf |
| Doğu ve Güney Afrika Devletleri | Madagaskar, Mauritius, Seyşeller, Zimbabve | Muaf |
| CPTPP | Brunei, Malezya | Muaf |
| Birleşik Krallık–Andorra anlaşması | Andorra | Muaf |
| Birleşik Krallık–Arnavutluk anlaşması | Arnavutluk | Muaf |
| Birleşik Krallık–Avustralya anlaşması | Avustralya | Muaf |
| Birleşik Krallık–Kanada anlaşması | Kanada | Muaf |
| Birleşik Krallık–İsviçre anlaşması | İsviçre | Muaf |
| Birleşik Krallık–Côte d’Ivoire anlaşması | Côte d’Ivoire | Muaf |
| Birleşik Krallık–Şili anlaşması | Şili | Muaf |
| Birleşik Krallık–Kamerun anlaşması | Kamerun | Muaf |
| Birleşik Krallık–Kolombiya anlaşması | Kolombiya | Muaf |
| Birleşik Krallık–Ceuta ve Melilla anlaşması | Ceuta ve Melilla | Muaf |
| Birleşik Krallık–Ekvador anlaşması | Ekvador | Muaf |
| Birleşik Krallık–Mısır anlaşması | Mısır | Muaf |
| Birleşik Krallık–Fiji anlaşması | Fiji | Muaf |
| Birleşik Krallık–Faroe Adaları anlaşması | Faroe Adaları | Muaf |
| Birleşik Krallık–Gürcistan anlaşması | Gürcistan | Muaf |
| Birleşik Krallık–Gana anlaşması | Gana | Muaf |
| DCTS Standard | Endonezya | Muaf |
| Birleşik Krallık–İsrail anlaşması | İsrail | Muaf |
| Birleşik Krallık–Hindistan anlaşması | Hindistan | Muaf |
| Birleşik Krallık–İzlanda anlaşması | İzlanda | Muaf |
| Birleşik Krallık–Ürdün anlaşması | Ürdün | Muaf |
| Birleşik Krallık–Japonya anlaşması | Japonya | Muaf |
| Birleşik Krallık–Kenya anlaşması | Kenya | Muaf |
| Birleşik Krallık–Güney Kore anlaşması | Güney Kore | Muaf |
| Birleşik Krallık–Lübnan anlaşması | Lübnan | Muaf |
| Birleşik Krallık–Liechtenstein anlaşması | Liechtenstein | Muaf |
| Birleşik Krallık–Fas anlaşması | Fas | Muaf |
| Birleşik Krallık–Moldova anlaşması | Moldova | Muaf |
| Birleşik Krallık–Kuzey Makedonya anlaşması | Kuzey Makedonya | Muaf |
| Birleşik Krallık–Meksika anlaşması | Meksika | Muaf |
| Birleşik Krallık–Norveç anlaşması | Norveç | Muaf |
| Birleşik Krallık–Yeni Zelanda anlaşması | Yeni Zelanda | Muaf |
| Birleşik Krallık–Peru anlaşması | Peru | Muaf |
| Birleşik Krallık–Papua Yeni Gine anlaşması | Papua Yeni Gine | Muaf |
| Birleşik Krallık–Filistin Bölgeleri anlaşması | Filistin Bölgeleri | Muaf |
| Birleşik Krallık–Sırbistan anlaşması | Sırbistan | Muaf |
| Birleşik Krallık–Solomon Adaları anlaşması | Solomon Adaları | Muaf |
| Birleşik Krallık–Singapur anlaşması | Singapur | Muaf |
| Birleşik Krallık–San Marino anlaşması | San Marino | Muaf |
| Birleşik Krallık–Tunus anlaşması | Tunus | Muaf |
| Birleşik Krallık–Türkiye anlaşması | Türkiye | Muaf |
| Birleşik Krallık–Ukrayna anlaşması | Ukrayna | Muaf |
| Birleşik Krallık–Vietnam anlaşması | Vietnam | Muaf |
| Birleşik Krallık–Samoa anlaşması | Samoa | Muaf |
| Birleşik Krallık–Kosova anlaşması | Kosova | Muaf |
| Birleşik Krallık–Güney Afrika anlaşması | Güney Afrika | Muaf |
Dipnotlar
TN200 The export of these items may be controlled under the Export Control Order 2008 as amended…
TN207 The Democratic People’s Republic of Korea (Sanctions) (EU Exit) Regulations 2019 impose tr…
TN701 According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9), as retained in UK La…
The prohibition shall not apply in respect of:
(a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established.
(b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014, as retained in UK Law, or in accordance with the EU-Ukraine Association Agreement
Birleşik Krallık: aylık ithalat · HS 8708.50
Başlıca tedarikçiler, son 12 ay
| Ülke | Değer | Pay | Değişim |
|---|---|---|---|
| £249,2 Mn | %28,3 | +%26,9 | |
| £101,5 Mn | %11,5 | -%9,6 | |
| £98,2 Mn | %11,1 | +%9,7 | |
| £76,2 Mn | %8,6 | -%13,8 | |
| £72,3 Mn | %8,2 | +%14,3 | |
| £57,7 Mn | %6,5 | +%32,6 | |
| £50 Mn | %5,7 | +%23 | |
| £36,1 Mn | %4,1 | +%36,2 |
Aynı alt pozisyon diğer tarifelerde
Birleşik Krallık pozisyonları: 8708.50
- 8708 50 20 15Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened
- 8708 50 20 18Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1.4 m or more but not more than 2.4 m, for use in the production of goods of chapter 87
- 8708 50 20 20Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
- 8708 50 20 25Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%, -forged, turned, milled and hardened
- 8708 50 20 35Inboard constant velocity joint tripod housing, with: -an outer diameter of 67.0 mm or more but not more than 99.0 mm, -3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
- 8708 50 20 50Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 20 55Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm, -forged, turned, broached and hardened
- 8708 50 20 70Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67.0 mm or more but not more than 84.5 mm, -3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm, - sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves
- 8708 50 20 75Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13.0mm or more but not more than 28.0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
- 8708 50 20 80Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 20 90For the industrial assembly of: other
- 8708 50 35 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 35 90Drive-axles with differential, whether or not provided with: other
- 8708 50 55 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 55 20Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 55 50Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened
- 8708 50 55 91Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 55 99Of closed-die forged steel: other
- 8708 50 91 10Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 91 11Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 91 90Drive-axles with differential, whether or not provided with: other, parts, other, for non-driving axles, other
- 8708 50 99 10Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
- 8708 50 99 25Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67.0 mm or more but not more than 84.5 mm, -3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm, - sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves
- 8708 50 99 35Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13.0mm or more but not more than 28.0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
- 8708 50 99 40Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (abs) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
- 8708 50 99 45Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%, -forged, turned, milled and hardened
- 8708 50 99 50Inboard constant velocity joint tripod housing, with: -an outer diameter of 67.0 mm or more but not more than 99.0 mm, -3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
- 8708 50 99 60Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm, -forged, turned, broached and hardened
- 8708 50 99 70Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 50 99 90Drive-axles with differential, whether or not provided with: other, parts, other
Benzer eşya için bağlayıcı tarife kararları
ABD Gümrük ve Sınır Koruma Teşkilatı (CROSS) ve İngiltere vergi idaresi HMRC (Advance Tariff Rulings) tarafından bu koda giren eşya için verilmiş kararlar. Karar yalnızca sahibini bağlar, ama idarelerin benzer eşyayı nasıl sınıflandırdığını gösterir. Eşya tanımları idarelerin kendi İngilizce metinleridir.
- N364933 U.S. CBP
The tariff classification of an automotive shim from South Korea
- N344019 U.S. CBP
The tariff classification of power train flanges from Japan
- N342419 U.S. CBP
The tariff classification of differential components from China
- N336861 U.S. CBP
The tariff classification and country of origin of half-shafts
- 600015867 HMRC
This is a third generation double angular contact flanged bearing used on the non-driving axles of motor vehicles. It contains an outer ring, inner ring, inner shaft, 22-28 steel balls, retainer, pulsar ring and seal. These are all separate finished products that are third generation double…
- 600016887 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
- 600016888 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
- 600015859 HMRC
Hub Unit Bearing This is a 3rd generation double angular contact flanged hub bearing for the use on the drive axle of a motor vehicle. It has a double rows of between 22-30 steel balls, an inner ring, shaft, outer ring, retainers, pulsar and seals. This product does contain parts that have been…
bu kod için toplam 13 karar
Hukuki notlar
8708 50 55 91, Birleşik Krallık Gümrük Tarifesi’nde 8708.50 alt pozisyonu (diferansiyelli hareket ettirici akslar) altındaki bir tarife pozisyonudur.
Üçüncü ülke vergisi %4.
Birleşik Krallık tarifesinde standart oran %4; ancak ticaret anlaşmaları ve tercih rejimleri sayesinde 174 ülke bu eşyayı vergisiz gönderebilir — örneğin DCTS Comprehensive ya da European Union kapsamında.
Birleşik Krallık’ta Belarus ve Rusya menşeli eşyaya gümrük vergisine ek olarak %35 ilave gümrük vergisi uygulanır.
Eylül 2025–Ağustos 2026 döneminde Birleşik Krallık’ın bu eşyadaki ithalatı £881,9 Mn oldu; bir önceki 12 aya göre artış %5. İthalatın %28 kadarı İtalya’dan geldi.
Aynı alt pozisyon için Türkiye vergisi %3–%4,5, AB vergisi %3–%4,5, ABD vergisi %0–%2,5, Kanada vergisi %0–%6, Meksika vergisi %0–%25, Brezilya vergisi %7,2–%18, Arjantin vergisi %0–%18, Peru vergisi vergisiz, Yeni Zelanda vergisi %0–%5, Japonya vergisi vergisiz, Tayvan vergisi %2,5–%15, KİK vergisi %5, İsviçre vergisi vergisiz, Norveç vergisi vergisiz, Kuzey Makedonya vergisi %0–%15 ve Nijerya vergisi %10.
Birleşik Krallık 2024 yılında 8708.50 alt pozisyonunda $1,1 Mr değerinde ithalat yaptı; en büyük tedarikçi İtalya oldu.
Sık sorulan sorular
8708 50 55 91 eşya kodu için gümrük vergisi ne kadar?
Birleşik Krallık Gümrük Tarifesi’nde üçüncü ülke vergisi %4. Anlaşma ülkelerine tanınan tercihli oranlar, anti-damping vergileri ve KDV bu orana dahil değildir.
8708 50 55 91 için hangi ülkelere daha düşük oran uygulanır?
174 ülkenin bu pozisyonda tercihli oranı var; 174 tanesinde oran sıfır (DCTS Comprehensive, European Union, DCTS Enhanced ve diğerleri). Oran yalnızca anlaşmanın menşe kurallarını karşılayan ve menşe ispat belgesi bulunan eşyaya uygulanır. Sayfada menşe ülkeyi seçerek oranı görebilirsiniz.
8708 50 55 91 için anti-damping veya ek vergi var mı?
Belarus ve Rusya menşeli eşyaya %35 ilave gümrük vergisi. Bu vergiler gümrük vergisine ek olarak alınır.