Tariffa doganale del Canada
Tariffa doganale del Canada, capitolo 72: Ghisa, ferro e acciaio
- 550Linee tariffarie
- EsenteAliquota
Il capitolo 72 conta 550 linee nella tariffa doganale del Canada, distribuite in 29 voci.
Tutte le linee sono esenti da dazio.
La voce 7217, fili di ferro o di acciai non legati, è la più suddivisa: 82 linee.
L’aliquota più frequente è l’esenzione, su 550 linee.
7201 Ghise gregge e ghise specolari in pani, salmoni o altre forme primarie
7202 Ferro-leghe
- 7202.11.00.00Containing by weight more than 2% of carbon
- 7202.19.00.00Ferro-manganese, other, other
- 7202.21.00.00Containing by weight more than 55% of silicon
- 7202.29.00.00Ferro-silicon, other, other
- 7202.30.00.00Ferro-silico-manganese, ferro-silico-manganese
- 7202.41.00.00Containing by weight more than 4% of carbon Note: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies.
- 7202.49.00.00Other Note: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies.
- 7202.50.00.00Ferro-silico-chromium, ferro-silico-chromium
- 7202.60.00.00Ferro-nickel, ferro-nickel
- 7202.70.00.00Ferro-molybdenum, ferro-molybdenum
- 7202.80.00.00Ferro-tungsten and ferro-silico-tungsten, ferro-tungsten and ferro-silico-tungsten
- 7202.91.00.00Other, ferro-titanium and ferro-silico-titanium, ferro-titanium and ferro-silico-titanium
- 7202.92.00.00Other, ferro-vanadium, ferro-vanadium
- 7202.93.00.00Other, ferro-niobium, ferro-niobium
- 7202.99.00.00Other, other, other
7203 Prodotti ferrosi ottenuti per riduzione diretta di minerali di ferro ed altri prodotti ferrosi spugnosi, in pezzi, palline o forme simili; ferro di purezza minima, in peso, di 99,94 %, in pezzi, palline o forme simili
7204 Cascami ed avanzi di ghisa, di ferro o di acciaio (rottami); cascami lingottati di ferro o di acciaio
- 7204.10.00.00Waste and scrap of cast iron
- 7204.21.00.00Waste and scrap of alloy steel: of stainless steel, of stainless steel
- 7204.29.00.00Waste and scrap of alloy steel: other, other
- 7204.30.00.00Waste and scrap of tinned iron or steel
- 7204.41.00.10Turnings, shavings, chips, milling waste, sawdust, filings: no.1 in bundles
- 7204.41.00.20Other turnings and shavings
- 7204.41.00.90Turnings, shavings, chips, milling waste, sawdust, filings: other
- 7204.49.00.10No. 1 heavy melting
- 7204.49.00.20No. 2 heavy melting
- 7204.49.00.91Other waste and scrap: other, other, shredded
- 7204.49.00.99Other waste and scrap: other, other, other
- 7204.50.00.00Remelting scrap ingots, remelting scrap ingots
7205 Graniglie e polveri, di ghisa greggia, di ghisa specolare, di ferro o di acciaio
7206 Ferro ed acciai non legati in lingotti o in altre forme primarie, escluso il ferro della voce 7203
7207 Semiprodotti di ferro o di acciai non legati
- 7207.11.00.10Of rectangular: of iron
- 7207.11.00.21Of rectangular: of non-alloy steel, billets
- 7207.11.00.29Of rectangular: of non-alloy steel, other
- 7207.12.00.00Other, of rectangular (other than square) cross-section
- 7207.19.00.10Containing by weight less than 0.25% of carbon: other, rounds
- 7207.19.00.90Containing by weight less than 0.25% of carbon: other, other
- 7207.20.00.10Containing by weight 0.25% or more of carbon: blooms
- 7207.20.00.20Containing by weight 0.25% or more of carbon: billets
- 7207.20.00.30Slabs, sheet bars or rounds
- 7207.20.00.90Containing by weight 0.25% or more of carbon: other
7208 Prodotti laminati piatti, di ferro o di acciai non legati, di larghezza uguale o superiore a 600 mm, laminati a caldo, non placcati né rivestiti
- 7208.10.00.00In coils, not further worked than hot-rolled, with patterns in relief
- 7208.25.00.00Of a thickness of 4.75 mm or more
- 7208.26.00.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27.00.00Of a thickness of less than 3 mm
- 7208.36.00.00Of a thickness exceeding 10 mm
- 7208.37.00.10Of a width of 600 mm or more but not exceeding 1,525 mm
- 7208.37.00.20Of a width exceeding 1,525 mm but not exceeding 1,830 mm
- 7208.37.00.50Of a width exceeding 1,830 mm
- 7208.38.00.10Of a width of 600 mm or more but not exceeding 1,525 mm
- 7208.38.00.20Of a width exceeding 1,525 mm but not exceeding 1,830 mm
- 7208.38.00.50Of a width exceeding 1,830 mm
- 7208.39.00.00Of a thickness of less than 3 mm
- 7208.40.00.00Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.51.00.11Pressure vessel quality, vacuum-degassed
- 7208.51.00.12Pressure vessel quality, not vacuum-degassed
- 7208.51.00.19Of a thickness exceeding 10 mm: heat treated, other
- 7208.51.00.21Of a width less than 1,168.4 mm
- 7208.51.00.22Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.23Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.24Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.25Of a width exceeding 3,098.8 mm
- 7208.51.00.31Of a width less than 1,168.4 mm
- 7208.51.00.32Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.33Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.34Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.35Of a width exceeding 3,098.8 mm
- 7208.51.00.41Of a width less than 1,168.4 mm
- 7208.51.00.42Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.43Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.44Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.45Of a width exceeding 3,098.8 mm
- 7208.51.00.51Of a width less than 1,168.4 mm
- 7208.51.00.52Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.53Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.54Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.55Of a width exceeding 3,098.8 mm
- 7208.51.00.61Of a width less than 1,168.4 mm
- 7208.51.00.62Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.63Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.64Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.65Of a width exceeding 3,098.8 mm
- 7208.51.00.71Of a width less than 1,168.4 mm
- 7208.51.00.72Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.51.00.73Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.51.00.74Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.51.00.75Of a width exceeding 3,098.8 mm
- 7208.52.00.11Pressure vessel quality, vacuum-degassed
- 7208.52.00.12Pressure vessel quality, not vacuum-degassed
- 7208.52.00.19Of a thickness of 4.75 mm or more but not exceeding 10 mm: heat treated, other
- 7208.52.00.81Of a width less than 1,168.4 mm
- 7208.52.00.82Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
- 7208.52.00.83Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
- 7208.52.00.84Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
- 7208.52.00.85Of a width exceeding 3,098.8 mm
- 7208.53.00.00Other, of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54.00.00Other, of a thickness of less than 3 mm
- 7208.90.00.00Other, other
7209 Prodotti laminati piatti, di ferro o di acciai non legati, di larghezza uguale o superiore a 600 mm laminati a freddo, non placcati né rivestiti
- 7209.15.00.00Of a thickness of 3 mm or more
- 7209.16.00.40Of a thickness exceeding 1 mm but less than 3 mm: annealed
- 7209.16.00.90Of a thickness exceeding 1 mm but less than 3 mm: other
- 7209.17.00.40Of a thickness of 0.5 mm or more but not exceeding 1 mm: annealed
- 7209.17.00.90Of a thickness of 0.5 mm or more but not exceeding 1 mm: other
- 7209.18.00.00Of a thickness of less than 0.5 mm
- 7209.25.00.00Of a thickness of 3 mm or more
- 7209.26.00.00Of a thickness exceeding 1 mm but less than 3 mm
- 7209.27.00.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.28.00.00Of a thickness of less than 0.5 mm
- 7209.90.00.00Other, other
7210 Prodotti laminati piatti, di ferro o di acciai non legati, di larghezza uguale o superiore a 600 mm, placcati o rivestiti
- 7210.11.00.00Of a thickness of 0.5 mm or more
- 7210.12.00.00Of a thickness of less than 0.5 mm
- 7210.20.00.00Plated or coated with lead, including terne-plate
- 7210.30.00.00Electrolytically plated or coated with zinc
- 7210.41.00.00Otherwise plated or coated with zinc: corrugated, corrugated
- 7210.49.00.40Of a thickness less than 0.25 mm
- 7210.49.00.50Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7210.49.00.60Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7210.49.00.70Of a thickness exceeding 1 mm
- 7210.50.00.00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61.00.10Of a thickness of less than 1.44 mm
- 7210.61.00.20Of a thickness of 1.44 mm or more
- 7210.69.00.10Of a thickness of less than 1.44 mm
- 7210.69.00.20Of a thickness of 1.44 mm or more
- 7210.70.00.10Not plated or coated with metal and not clad
- 7210.70.00.21Plated or coated with zinc: electrolytically
- 7210.70.00.29Plated or coated with zinc: other
- 7210.70.00.90Painted, varnished or coated with plastics: other
- 7210.90.00.00Other, other
7211 Prodotti laminati piatti, di ferro o di acciai non legati, di larghezza inferiore a 600 mm, non placcati né rivestiti
- 7211.13.00.00Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- 7211.14.00.10Other, of a thickness of 4.75 mm or more: not in coils
- 7211.14.00.90Other, of a thickness of 4.75 mm or more: other
- 7211.19.00.10Not further worked than hot-rolled: other, not in coils
- 7211.19.00.90Not further worked than hot-rolled: other, other
- 7211.23.00.00Containing by weight less than 0.25% of carbon
- 7211.29.00.00Not further worked than cold-rolled (cold-reduced): other, other
- 7211.90.00.00Other, other
7212 Prodotti laminati piatti, di ferro o di acciai non legati, di larghezza inferiore a 600 mm, placcati o rivestiti
- 7212.10.00.00Plated or coated with tin
- 7212.20.00.10Of a thickness less than 0.25 mm
- 7212.20.00.20Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7212.20.00.30Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7212.20.00.40Of a thickness exceeding 1 mm
- 7212.30.00.10Of a thickness less than 0.25 mm
- 7212.30.00.20Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7212.30.00.30Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7212.30.00.40Of a thickness exceeding 1 mm
- 7212.40.00.10Not plated or coated with metal and not clad
- 7212.40.00.21Painted, varnished or coated with plastics: electrolytically
- 7212.40.00.29Painted, varnished or coated with plastics: other
- 7212.40.00.90Painted, varnished or coated with plastics: other
- 7212.50.00.30Of a thickness less than 0.25 mm
- 7212.50.00.40Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7212.50.00.50Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7212.50.00.60Of a thickness exceeding 1 mm
- 7212.60.00.00Clad, clad
7213 Vergella o bordione di ferro o di acciai non legati
- 7213.10.00.11Of a diameter of 12 mm or less
- 7213.10.00.12Of a diameter of more than 12 mm but not exceeding 17 mm
- 7213.10.00.13Of a diameter exceeding 17 mm
- 7213.10.00.90Containing indentations, ribs, grooves or other: other
- 7213.20.00.50Containing by weight 0.1% or more of lead
- 7213.20.00.90Other, of free-cutting steel: other
- 7213.91.00.41Tire cord-quality steel wire rod, as defined in Statistical Note 2 to this Chapter
- 7213.91.00.42Of cold heading quality (CHQ) steel, as defined in Statistical Note 3 to this Chapter
- 7213.91.00.43Of welding quality wire rods, as defined in Statistical Note 4 to this Chapter
- 7213.91.00.49Of circular cross-section measuring less than 14: other
- 7213.91.00.50Other, containing by weight less than 0.25% of carbon
- 7213.91.00.60Other, containing by weight 0.25% or more but less than 0.6% of carbon
- 7213.91.00.70Other, containing by weight 0.6% or more of carbon
- 7213.99.00.11Of a diameter of 14 mm or more but less than 19 mm
- 7213.99.00.12Of a diameter of 19 mm or more but not exceeding 25.5 mm
- 7213.99.00.13Of a diameter exceeding 25.5 mm
- 7213.99.00.31Of a diameter of 14 mm or more but less than 19 mm
- 7213.99.00.32Of a diameter of 19 mm or more but not exceeding 25.5 mm
- 7213.99.00.33Of a diameter exceeding 25.5 mm
- 7213.99.00.51Of a diameter of 14 mm or more but less than 19 mm
- 7213.99.00.52Of a diameter of 19 mm or more but not exceeding 25.5 mm
- 7213.99.00.53Of a diameter exceeding 25.5 mm
- 7213.99.00.90Other, other, other
7214 Barre di ferro o di acciai non legati, semplicemente fucinate, laminate o estruse a caldo, nonché quelle che hanno subito una torsione dopo la laminazione
- 7214.10.00.00Forged, forged
- 7214.20.00.11With a maximum yield point of 400MPa
- 7214.20.00.12With a minimum yield point greater than 400MPa but not exceeding 500MPa
- 7214.20.00.13With a minimum yield point greater than 500MPa but not exceeding 600MPa
- 7214.20.00.14With a minimum yield point greater than 600MPa
- 7214.20.00.21With a maximum yield point of 400MPa
- 7214.20.00.22With a minimum yield point greater than 400MPa but not exceeding 500MPa
- 7214.20.00.23With a minimum yield point greater than 500MPa but not exceeding 600MPa
- 7214.20.00.24With a minimum yield point greater than 600MPa
- 7214.20.00.31With a maximum yield point of 400MPa
- 7214.20.00.32With a minimum yield point greater than 400MPa but not exceeding 500MPa
- 7214.20.00.33With a minimum yield point greater than 500MPa but not exceeding 600MPa
- 7214.20.00.34With a minimum yield point greater than 600MPa
- 7214.20.00.90Containing indentations, ribs, grooves or other: other
- 7214.30.00.10Containing by weight 0.15% or more but not exceeding 0.35% of lead or 0.05% or more but not exceeding 0.4% of bismuth, for use in Canadian manufactures
- 7214.30.00.24Of a width not exceeding 76 mm
- 7214.30.00.25Of a width exceeding 76 mm but less than 152 mm
- 7214.30.00.26Of a width of 152 mm or more
- 7214.30.00.33Of a diameter not exceeding 76 mm
- 7214.30.00.34Of a diameter exceeding 76 mm
- 7214.30.00.40Other, of free-cutting steel: hexagons
- 7214.30.00.50Other, of free-cutting steel: squares
- 7214.30.00.90Other, of free-cutting steel: other
- 7214.91.00.11Of a width not exceeding 76 mm
- 7214.91.00.12Of a width exceeding 76 mm but less than 152 mm
- 7214.91.00.13Of a width of 152 mm or more
- 7214.91.00.21Of a width not exceeding 76 mm
- 7214.91.00.22Of a width exceeding 76 mm but less than 152 mm
- 7214.91.00.23Of a width of 152 mm or more
- 7214.91.00.31Of a width not exceeding 76 mm
- 7214.91.00.32Of a width exceeding 76 mm but less than 152 mm
- 7214.91.00.33Of a width of 152 mm or more
- 7214.99.00.20Other, other, hexagons
- 7214.99.00.30Other, other, squares
- 7214.99.00.41Rounds, of a diameter of less than 76 mm
- 7214.99.00.42Rounds, of a diameter of 76 mm or more but not exceeding 152 mm
- 7214.99.00.43Rounds, of a diameter exceeding 152 mm
- 7214.99.00.49Other, other, other
- 7214.99.00.51Rounds, of a diameter of less than 76 mm
- 7214.99.00.52Rounds, of a diameter of 76 mm or more but not exceeding 152 mm
- 7214.99.00.53Rounds, of a diameter exceeding 152 mm
- 7214.99.00.59Other, other, other
- 7214.99.00.60Other, containing by weight 0.6% or more of carbon
7215 Altre barre di ferro o di acciai non legati
- 7215.10.00.20Of free-cutting steel, not further worked than cold-formed: rounds
- 7215.10.00.90Of free-cutting steel, not further worked than cold-formed: other
- 7215.50.00.10Other, not further worked than cold-formed or cold-finished: flat bars
- 7215.50.00.21Ground, turned or polished
- 7215.50.00.29Other, not further worked than cold-formed or cold-finished: rounds, other
- 7215.50.00.90Other, not further worked than cold-formed or cold-finished: other
- 7215.90.00.10Other, chrome plated
- 7215.90.00.20Corrosion resistant concrete reinforcing bars
- 7215.90.00.30Other concrete reinforcing bars
- 7215.90.00.90Other, other
7216 Profilati di ferro o di acciai non legati
- 7216.10.00.11U, I or H sections, not further worked than hot-rolled: u sections, american standard
- 7216.10.00.19U, I or H sections, not further worked than hot-rolled: u sections, other
- 7216.10.00.21U, I or H sections, not further worked than hot-rolled: i sections, american standard
- 7216.10.00.29U, I or H sections, not further worked than hot-rolled: i sections, other
- 7216.10.00.30U, I or H sections, not further worked than hot-rolled: h sections
- 7216.21.00.10L or T sections, not further worked than hot-rolled: l sections, equal legs
- 7216.21.00.20L or T sections, not further worked than hot-rolled: l sections, unequal legs
- 7216.22.00.00L or T sections, not further worked than hot-rolled: t sections, t sections
- 7216.31.00.11Of a height of 80 mm or more but not exceeding 152.4 mm: american standard
- 7216.31.00.12Of a height of 80 mm or more but not exceeding 152.4 mm: for motor vehicles
- 7216.31.00.19Of a height of 80 mm or more but not exceeding 152.4 mm: other
- 7216.31.00.21Of a height exceeding 152.4 mm: american standard
- 7216.31.00.22Of a height exceeding 152.4 mm: for motor vehicles
- 7216.31.00.29Of a height exceeding 152.4 mm: other
- 7216.32.00.10Of a height of 80 mm or more but not exceeding 152.4 mm
- 7216.32.00.20Of a height exceeding 152.4 mm
- 7216.33.00.11Of a height not exceeding 150 mm
- 7216.33.00.12Of a height exceeding 150 mm but not exceeding 355 mm
- 7216.33.00.13Of a height exceeding 355 mm but not exceeding 635 mm
- 7216.33.00.14Of a height exceeding 635 mm
- 7216.33.00.20U, I or H sections, not further worked than hot-rolled: h sections, bearing pile
- 7216.33.00.91Of a height of 80 mm or more but not exceeding 152.4 mm
- 7216.33.00.92Of a height exceeding 152.4 mm
- 7216.40.00.11Of a height of 80 mm or more but not exceeding 152.4 mm
- 7216.40.00.12Of a height exceeding 152.4 mm
- 7216.40.00.21Large leg, of a height of 80 mm or more but not exceeding 152.4 mm
- 7216.40.00.22Large leg, of a height exceeding 152.4 mm
- 7216.40.00.30L or T sections, not further worked than hot-rolled: t sections
- 7216.50.00.10For use in ships, boats or floating structures
- 7216.50.00.20Shapes or sections, with bevelled edge or edges, of a length of more than 3.65 m and either of a width of more than 25.4 cm or of a thickness of more than 3.5 cm, for use in the manufacture of cutting edges for bulldozer or angledozer blades, front-end shovel loader buckets, combination excavating and transporting scrapers, road graders or road scrapers
- 7216.50.00.30Track shoe profile bars of steel, of a width of 190 mm or more but not exceeding 350 mm and of a height not exceeding 150 mm, for use in the manufacture of track shoes for track-laying machinery or vehicles
- 7216.50.00.90Other angles, shapes and sections, not further worked than: other
- 7216.61.00.00Obtained from flat-rolled products
- 7216.69.00.00Angles, shapes and sections, not further worked than: other, other
- 7216.91.00.10Cold-formed or cold-finished from flat-rolled products: l sections
- 7216.91.00.20I or H sections
- 7216.91.00.30Cold-formed or cold-finished from flat-rolled products: u sections
- 7216.91.00.91Cold-formed or cold-finished from flat-rolled products: other, ribbed shapes
- 7216.91.00.99Cold-formed or cold-finished from flat-rolled products: other, other
- 7216.99.00.10Other, other, l sections
- 7216.99.00.20I or H sections
- 7216.99.00.30Other, other, u sections
- 7216.99.00.91Other, other, other, ribbed shapes
- 7216.99.00.99Other, other, other, other
7217 Fili di ferro o di acciai non legati
- 7217.10.00.41Of a diameter of less than 1.5 mm, in coils weighing not more than 2 kg
- 7217.10.00.42Other, of a diameter of less than 1 mm
- 7217.10.00.43Other, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.44Other, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.45Other, of a diameter of 3 mm or more
- 7217.10.00.51Round, of a diameter of less than 1 mm
- 7217.10.00.52Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.53Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.54Round, of a diameter of 3 mm or more
- 7217.10.00.55Not plated or coated, whether or not polished: flat
- 7217.10.00.59Not plated or coated, whether or not polished: other
- 7217.10.00.61Heat treated, of a diameter of less than 1 mm
- 7217.10.00.62Heat treated, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.63Heat treated, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.64Heat treated, of a diameter of 3 mm or more
- 7217.10.00.65Other, of a diameter of less than 1 mm
- 7217.10.00.66Other, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.67Other, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.68Other, of a diameter of 3 mm or more
- 7217.10.00.71Not plated or coated, whether or not polished: flat
- 7217.10.00.79Not plated or coated, whether or not polished: other
- 7217.10.00.81Heat treated, of a diameter of less than 1 mm
- 7217.10.00.82Heat treated, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.83Heat treated, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.84Heat treated, of a diameter of 3 mm or more
- 7217.10.00.85Other, of a diameter of less than 1 mm
- 7217.10.00.86Other, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.10.00.87Other, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.10.00.88Other, of a diameter of 3 mm or more
- 7217.10.00.91Not plated or coated, whether or not polished: flat
- 7217.10.00.99Not plated or coated, whether or not polished: other
- 7217.20.00.10Plated or coated with zinc: flat
- 7217.20.00.41Round, of a diameter of less than 1 mm
- 7217.20.00.42Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.43Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.44Round, of a diameter of 3 mm or more
- 7217.20.00.49Plated or coated with zinc: other
- 7217.20.00.51Round, of a diameter of less than 1 mm
- 7217.20.00.52Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.53Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.54Round, of a diameter of 3 mm or more
- 7217.20.00.59Plated or coated with zinc: other
- 7217.20.00.61Round, of a diameter of less than 1 mm
- 7217.20.00.62Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.63Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.64Round, of a diameter of 3 mm or more
- 7217.20.00.69Plated or coated with zinc: other
- 7217.20.00.71Round, of a diameter of less than 1 mm
- 7217.20.00.72Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.73Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.74Round, of a diameter of 3 mm or more
- 7217.20.00.79Plated or coated with zinc: other
- 7217.20.00.81Round, of a diameter of less than 1 mm
- 7217.20.00.82Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.83Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.84Round, of a diameter of 3 mm or more
- 7217.20.00.89Plated or coated with zinc: other
- 7217.20.00.91Round, of a diameter of less than 1 mm
- 7217.20.00.92Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.20.00.93Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.20.00.94Round, of a diameter of 3 mm or more
- 7217.20.00.99Plated or coated with zinc: other
- 7217.30.00.10Plated or coated with other base metals: flat
- 7217.30.00.21Round, of a diameter of less than 1 mm
- 7217.30.00.22Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.30.00.23Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.30.00.24Round, of a diameter of 3 mm or more
- 7217.30.00.29Plated or coated with other base metals: other
- 7217.30.00.31Round, of a diameter of less than 1 mm
- 7217.30.00.32Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.30.00.33Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.30.00.34Round, of a diameter of 3 mm or more
- 7217.30.00.39Plated or coated with other base metals: other
- 7217.30.00.41Round, of a diameter of less than 1 mm
- 7217.30.00.42Round, of a diameter of 1 mm or more but less than 1.5 mm
- 7217.30.00.43Round, of a diameter of 1.5 mm or more but less than 3 mm
- 7217.30.00.44Round, of a diameter of 3 mm or more
- 7217.30.00.49Plated or coated with other base metals: other
- 7217.90.00.20Other, coated with plastics
- 7217.90.00.91Containing by weight less than 0.25% of carbon
- 7217.90.00.92Containing by weight 0.25% or more but less than 0.6% of carbon
- 7217.90.00.93Containing by weight 0.6% or more of carbon
7218 Acciai inossidabili in lingotti o in altre forme primarie; semiprodotti di acciai inossidabili
7219 Prodotti laminati piatti, di acciai inossidabili, di larghezza uguale o superiore a 600 mm
- 7219.11.00.00Of a thickness exceeding 10 mm
- 7219.12.00.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13.00.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.00.00Of a thickness of less than 3 mm
- 7219.21.00.10Of a width of 600 mm or more but not exceeding 1,830 mm
- 7219.21.00.20Of a width exceeding 1,830 mm
- 7219.22.00.10Of a width of 600 mm or more but not exceeding 1,830 mm
- 7219.22.00.20Of a width exceeding 1,830 mm
- 7219.23.00.00Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.00.00Of a thickness of less than 3 mm
- 7219.31.00.00Of a thickness of 4.75 mm or more
- 7219.32.00.10Of a thickness of 3 mm or more but less than 4.75 mm: 300 Series
- 7219.32.00.90Of a thickness of 3 mm or more but less than 4.75 mm: other
- 7219.33.00.10Of a thickness exceeding 1 mm but less than 3 mm: 300 Series
- 7219.33.00.90Of a thickness exceeding 1 mm but less than 3 mm: other
- 7219.34.00.10Of a thickness of 0.5 mm or more but not exceeding 1 mm: 300 Series
- 7219.34.00.90Of a thickness of 0.5 mm or more but not exceeding 1 mm: other
- 7219.35.00.10Of a thickness of less than 0.5 mm: 300 Series
- 7219.35.00.90Of a thickness of less than 0.5 mm: other
- 7219.90.00.00Other, other
7220 Prodotti laminati piatti di acciai inossidabili, di larghezza inferiore a 600 mm
7221 Vergella o bordione di acciai inossidabili
- 7221.00.00.30Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7221.00.00.40Bars and rods, hot-rolled, in irregularly wound coils: rounds, 300 series
- 7221.00.00.50Bars and rods, hot-rolled, in irregularly wound coils: other rounds
- 7221.00.00.60Bars and rods, hot-rolled, in irregularly wound coils: other wire rods
- 7221.00.00.90Bars and rods, hot-rolled, in irregularly wound coils: other
7222 Barre e profilati di acciai inossidabili
- 7222.11.00.10Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7222.11.00.31Of a diameter of 25 mm or more
- 7222.11.00.32Of a diameter of less than 25 mm
- 7222.11.00.91Of a diameter of 25 mm or more
- 7222.11.00.92Of a diameter of less than 25 mm
- 7222.19.00.11High nickel alloy steel: flat bars
- 7222.19.00.19High nickel alloy steel: other
- 7222.19.00.21Bars and rods, not further worked than hot-rolled: other, other, flat bars
- 7222.19.00.29Bars and rods, not further worked than hot-rolled: other, other, other
- 7222.20.00.20Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7222.20.00.31Rounds, of a diameter of 25 mm or more
- 7222.20.00.32Rounds, of a diameter of less than 25 mm
- 7222.20.00.39Bars and rods, not further worked than cold-formed: other
- 7222.20.00.91Rounds, of a diameter of 25 mm or more
- 7222.20.00.92Rounds, of a diameter of less than 25 mm
- 7222.20.00.93Bars and rods, not further worked than cold-formed: other, flat bars
- 7222.20.00.99Bars and rods, not further worked than cold-formed: other, other
- 7222.30.00.20Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7222.30.00.30Other, of high nickel alloy steel
- 7222.30.00.90Other bars and rods: other
- 7222.40.00.10Profile wire, cold drawn or cold drawn and annealed, up to 0.787 mm² in maximum solid cross-sectional area
- 7222.40.00.20Angles, shapes and sections: other wire
- 7222.40.00.90Angles, shapes and sections: other
7223 Fili di acciai inossidabili
- 7223.00.00.30Profile wire, cold drawn or cold drawn and annealed, up to 0.787 mm² in maximum solid cross-sectional area
- 7223.00.00.41Other, coated or covered: round spring
- 7223.00.00.42Other, coated or covered: other round
- 7223.00.00.49Other, coated or covered: other
- 7223.00.00.51Wire of stainless steel: other round, spring
- 7223.00.00.52Other, of a diameter of less than 0.25 mm
- 7223.00.00.53Other, of a diameter of 0.25 mm or more but less than 0.76 mm
- 7223.00.00.54Other, of a diameter of 0.76 mm or more but less than 1.52 mm
- 7223.00.00.55Other, of a diameter of 1.52 mm or more but less than 5.1 mm
- 7223.00.00.56Other, of a diameter of 5.1 mm or more but less than 6.5 mm
- 7223.00.00.57Other, of a diameter of 6.5 mm or more
- 7223.00.00.90Wire of stainless steel: other
7224 Altri acciai legati in lingotti o in altre forme primarie; semiprodotti di altri acciai legati
7225 Prodotti laminati piatti di altri acciai legati, di larghezza uguale o superiore a 600 mm
- 7225.11.00.00Of silicon-electrical steel, grain-oriented, grain-oriented
- 7225.19.00.00Of silicon-electrical steel, other, other
- 7225.30.00.00Other, not further worked than hot-rolled, in coils
- 7225.40.00.10Other, not further worked than hot-rolled, not in coils: heat treated
- 7225.40.00.20Other, of a width of 600 mm or more but not exceeding 1,525 mm
- 7225.40.00.30Other, of a width exceeding 1,525 mm but not exceeding 1,830 mm
- 7225.40.00.40Other, of a width exceeding 1,830 mm but not exceeding 2,450 mm
- 7225.40.00.50Other, of a width exceeding 2,450 mm
- 7225.50.00.10Of a thickness of less than 0.5 mm
- 7225.50.00.20Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7225.50.00.30Of a thickness exceeding 1 mm but less than 3 mm
- 7225.50.00.40Of a thickness of 3 mm or more
- 7225.91.00.10Of a thickness of less than 0.25 mm
- 7225.91.00.20Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7225.91.00.30Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7225.91.00.40Of a thickness exceeding 1 mm
- 7225.92.00.10Of a thickness less than 0.25 mm
- 7225.92.00.20Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7225.92.00.30Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7225.92.00.40Of a thickness exceeding 1 mm
- 7225.99.00.20Plated or coated with aluminum or aluminum alloys
- 7225.99.00.90Other, other, other
7226 Prodotti laminati piatti di altri acciai legati, di larghezza inferiore a 600 mm
- 7226.11.00.00Of silicon-electrical steel, grain-oriented, grain-oriented
- 7226.19.00.00Of silicon-electrical steel, other, other
- 7226.20.00.00Of high speed steel
- 7226.91.00.00Not further worked than hot-rolled
- 7226.92.00.00Not further worked than cold-rolled (cold-reduced)
- 7226.99.00.11Of a thickness of less than 0.25 mm
- 7226.99.00.12Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7226.99.00.13Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7226.99.00.19Of a thickness exceeding 1 mm
- 7226.99.00.91Of a thickness of less than 0.25 mm
- 7226.99.00.92Of a thickness of 0.25 mm or more but less than 0.5 mm
- 7226.99.00.93Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7226.99.00.99Of a thickness exceeding 1 mm
7227 Vergella o bordione di altri acciai legati
- 7227.10.00.00Of high speed steel
- 7227.20.00.20Of welding quality wire rods, as defined in statistical note 4 to this chapter
- 7227.20.00.90Of silico-manganese steel, other
- 7227.90.00.11Other, of ball-bearing steel
- 7227.90.00.19Other, other
- 7227.90.00.21Other, of ball-bearing steel
- 7227.90.00.29Other, other
- 7227.90.00.50Other, containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7227.90.00.60Other, of cold heading quality (CHQ) steel, as defined in Statistical Note 3 to this Chapter
- 7227.90.00.70Other, of welding quality wire rods, as defined in Statistical Note 4 to this Chapter
- 7227.90.00.81Of a diameter of less than 14 mm
- 7227.90.00.82Of a diameter of 14 mm or more but not exceeding 19 mm
- 7227.90.00.83Of a diameter of 19 mm or more
- 7227.90.00.90Other, other
7228 Barre e profilati di altri acciai legati; barre forate per la perforazione, di acciai legati o non legati
- 7228.10.00.10Bars and rods, of high speed steel: cold-formed
- 7228.10.00.20Bars and rods, of high speed steel: not cold-formed
- 7228.20.00.40Bars and rods, of silico-manganese steel: cold-formed
- 7228.20.00.50Bars and rods, of silico-manganese steel: not cold-formed
- 7228.30.00.41Of ball bearing steel
- 7228.30.00.42Of chipper knife steel, not cold-formed
- 7228.30.00.49Of tool steel (other than high-speed steel): other
- 7228.30.00.51With a diameter of 12 mm or less
- 7228.30.00.52With a diameter of more than 12 mm but not exceeding 39 mm
- 7228.30.00.53With a diameter exceeding 39 mm
- 7228.30.00.60Other, of high-nickel alloy steel
- 7228.30.00.71With a diameter of less than 76 mm
- 7228.30.00.72With a diameter of 76 mm or more but not exceeding 152 mm
- 7228.30.00.73With a diameter of 152 mm or more but not exceeding 228 mm
- 7228.30.00.74With a diameter exceeding 228 mm
- 7228.30.00.81With a minimum cross section less than 152mm
- 7228.30.00.82With a maximum cross section of 152mm or more
- 7228.30.00.90Other bars and rods, not further worked than hot-rolled: other
- 7228.40.00.10Other bars and rods, not further worked than forged: mold steel
- 7228.40.00.20Other bars and rods, not further worked than forged: tool steel
- 7228.40.00.90Other bars and rods, not further worked than forged: other
- 7228.50.00.10Other bars and rods, not further worked than cold-formed: mold steel
- 7228.50.00.20Other bars and rods, not further worked than cold-formed: tool steel
- 7228.50.00.90Other bars and rods, not further worked than cold-formed: other
- 7228.60.00.00Other bars and rods
- 7228.70.00.11L sections, not further worked than hot-rolled: equal legs
- 7228.70.00.12L sections, not further worked than hot-rolled: unequal legs
- 7228.70.00.21Of a height not exceeding 150 mm
- 7228.70.00.22Of a height exceeding 150 mm
- 7228.70.00.30Other H sections, not further worked than hot-rolled, cold-rolled, drawn or extruded
- 7228.70.00.41American standard, of a height not exceeding 150 mm
- 7228.70.00.42American standard, of a height exceeding 150 mm
- 7228.70.00.49I sections, not further worked than hot-rolled: other
- 7228.70.00.50U sections, not further worked than hot-rolled, cold-rolled, drawn or extruded
- 7228.70.00.60T sections, not further worked than hot-rolled, cold-rolled, drawn or extruded
- 7228.70.00.70Z sections, not further worked than hot-rolled, cold-rolled, drawn or extruded
- 7228.70.00.81Other shapes or sections, not further worked than: bearing pile
- 7228.70.00.82Curved grader blade sections
- 7228.70.00.83Track shoe profile bars of steel, of a width of 190 mm or more but not exceeding 350 mm and of a height not exceeding 150 mm, for use in the manufacture of track shoes for track-laying machinery or vehicles
- 7228.70.00.89Other shapes or sections, not further worked than: other
- 7228.70.00.91Angles, shapes and sections: other, l sections
- 7228.70.00.92H or I sections
- 7228.70.00.93Angles, shapes and sections: other, u sections
- 7228.70.00.99Angles, shapes and sections: other, other
- 7228.80.00.11Not further worked than hot-rolled: round, alloy steel
- 7228.80.00.12Not further worked than hot-rolled: round, non-alloy steel
- 7228.80.00.18Not further worked than hot-rolled: other, alloy steel
- 7228.80.00.19Not further worked than hot-rolled: other
- 7228.80.00.91Hollow drill bars and rods: other, round, alloy steel
- 7228.80.00.92Hollow drill bars and rods: other, round, non-alloy steel
- 7228.80.00.98Hollow drill bars and rods: other, other, alloy steel
- 7228.80.00.99Hollow drill bars and rods: other, other
7229 Fili di altri acciai legati
- 7229.20.00.11Plated or coated with copper
- 7229.20.00.19Of silico-manganese steel, other
- 7229.20.00.90Of silico-manganese steel, other
- 7229.90.00.30Other, of high-speed steel
- 7229.90.00.40Other, other flat
- 7229.90.00.51Plated or coated with copper
- 7229.90.00.59Other, other
- 7229.90.00.61Of a diameter of less than 1 mm
- 7229.90.00.62Of a diameter of 1 mm or more but less than 1.5 mm
- 7229.90.00.63Of a diameter of 1.5 mm or more but less than 3 mm
- 7229.90.00.64Of a diameter of 3 mm or more
- 7229.90.00.71Of a diameter of less than 1 mm
- 7229.90.00.72Of a diameter of 1 mm or more but less than 1.5 mm
- 7229.90.00.73Of a diameter of 1.5 mm or more but less than 3 mm
- 7229.90.00.74Of a diameter of 3 mm or more
- 7229.90.00.90Other, other