EU Combined Nomenclature
EU Combined Nomenclature, chapter 72: Iron and steel
- 344Tariff lines
- 0%–7%Rate
Chapter 72 has 344 lines in the EU Combined Nomenclature, spread over 29 headings.
Rates run from 0% to 7%, averaging 0.2%; 321 lines are duty-free.
Heading 7228, other bars and rods of other alloy steel, is divided furthest: 25 lines.
The most common rate is zero, on 321 lines.
The highest is 7% on 7202 49 10 (containing by weight not more than 0,05 % of carbon).
7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms
- 7201 10 11Containing by weight 1 % or less of silicon
- 7201 10 19Containing by weight more than 1 % of silicon
- 7201 10 30Containing by weight not less than 0,1 % but less than 0,4 % of manganese
- 7201 10 90Containing by weight less than 0,1 % of manganese
- 7201 20 00Non-alloy pig iron containing by weight more than 0,5 % of phosphorus
- 7201 50 10Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium
- 7201 50 90Alloy pig iron; spiegeleisen: other
7202 Ferro-alloys
- 7202 11 20With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %
- 7202 11 80Containing by weight more than 2 % of carbon: other
- 7202 19 00Ferro-alloys, ferro-manganese, other
- 7202 21 00Containing by weight more than 55 % of silicon
- 7202 29 10Containing by weight 4 % or more but not more than 10 % of magnesium
- 7202 29 90Ferro-alloys, ferro-silicon, other, other
- 7202 30 00Ferro-alloys, ferro-silico-manganese
- 7202 41 10Containing by weight more than 4 % but not more than 6 % of carbon
- 7202 41 90Containing by weight more than 6 % of carbon
- 7202 49 10Containing by weight not more than 0,05 % of carbon
- 7202 49 50Containing by weight more than 0,05 % but not more than 0,5 % of carbon
- 7202 49 90Containing by weight more than 0,5 % but not more than 4 % of carbon
- 7202 50 00Ferro-alloys, ferro-silico-chromium
- 7202 60 00Ferro-alloys, ferro-nickel
- 7202 70 00Ferro-alloys, ferro-molybdenum
- 7202 80 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten
- 7202 91 00Ferro-alloys, other, ferro-titanium and ferro-silico-titanium
- 7202 92 00Ferro-alloys, other, ferro-vanadium
- 7202 93 00Ferro-alloys, other, ferro-niobium
- 7202 99 10Ferro-alloys, other, other, ferro-phosphorus
- 7202 99 30Ferro-alloys, other, other, ferro-silico-magnesium
- 7202 99 80Ferro-alloys, other, other, other
7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel
- 7204 10 00Waste and scrap of cast iron
- 7204 21 10Containing by weight 8 % or more of nickel
- 7204 21 90Waste and scrap of alloy steel: of stainless steel, other
- 7204 29 00Waste and scrap of alloy steel: other
- 7204 30 00Waste and scrap of tinned iron or steel
- 7204 41 10Turnings, shavings, chips, milling waste, sawdust and filings
- 7204 41 91Turnings, shavings, chips, milling waste, sawdust, filings: trimmings and stampings, in bundles
- 7204 41 99Turnings, shavings, chips, milling waste, sawdust, filings: trimmings and stampings, other
- 7204 49 10Other waste and scrap: other, fragmentised (shredded)
- 7204 49 30Other waste and scrap: other, other, in bundles
- 7204 49 90Other waste and scrap: other, other, other
- 7204 50 00Ferrous waste and scrap: remelting scrap ingots
7205 Granules and powders, of pig iron, spiegeleisen, iron or steel
7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)
7207 Semi-finished products of iron or non-alloy steel
- 7207 11 11Rolled or obtained by continuous casting: of free-cutting steel
- 7207 11 14Of a thickness not exceeding 130 mm
- 7207 11 16Of a thickness exceeding 130 mm
- 7207 11 90Of rectangular: forged
- 7207 12 10Rolled or obtained by continuous casting
- 7207 12 90Other, of rectangular (other than square) cross-section: forged
- 7207 19 12Rolled or obtained by continuous casting
- 7207 19 19Of circular or polygonal cross-section: forged
- 7207 19 80Containing by weight less than 0,25 % of carbon: other, other
- 7207 20 11Rolled or obtained by continuous casting: of free-cutting steel
- 7207 20 150,25 % or more but less than 0,6 % of carbon
- 7207 20 170,6 % or more of carbon
- 7207 20 19Of rectangular: forged
- 7207 20 32Rolled or obtained by continuous casting
- 7207 20 39Other, of rectangular (other than square) cross-section: forged
- 7207 20 52Rolled or obtained by continuous casting
- 7207 20 59Of circular or polygonal cross-section: forged
- 7207 20 80Containing by weight 0,25 % or more of carbon: other
7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
- 7208 10 00In coils, not further worked than hot-rolled, with patterns in relief
- 7208 25 00Of a thickness of 4,75 mm or more
- 7208 26 00Of a thickness of 3 mm or more but less than 4,75 mm
- 7208 27 00Of a thickness of less than 3 mm
- 7208 36 00Of a thickness exceeding 10 mm
- 7208 37 00Of a thickness of 4,75 mm or more but not exceeding 10 mm
- 7208 38 00Of a thickness of 3 mm or more but less than 4,75 mm
- 7208 39 00Of a thickness of less than 3 mm
- 7208 40 00Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208 51 20Of a thickness exceeding 15 mm
- 7208 51 912050 mm or more
- 7208 51 98Less than 2050 mm
- 7208 52 10Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
- 7208 52 912050 mm or more
- 7208 52 99Less than 2050 mm
- 7208 53 10Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm and of a thickness of 4 mm or more
- 7208 53 90Of a thickness of 3 mm or more but less than 4,75 mm: other
- 7208 54 00Of a thickness of less than 3 mm
- 7208 90 20Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7208 90 80Flat-rolled products of iron or non-alloy steel, of a width: other, other
7209 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
- 7209 15 00Of a thickness of 3 mm or more
- 7209 16 10Of a thickness exceeding 1 mm but less than 3 mm: ‘Electrical’
- 7209 16 90Of a thickness exceeding 1 mm but less than 3 mm: other
- 7209 17 10Of a thickness of 0,5 mm or more but not exceeding 1 mm: ‘Electrical’
- 7209 17 90Of a thickness of 0,5 mm or more but not exceeding 1 mm: other
- 7209 18 10Of a thickness of less than 0,5 mm: ‘Electrical’
- 7209 18 91Of a thickness of 0,35 mm or more but less than 0,5 mm
- 7209 18 99Of a thickness of less than 0,35 mm
- 7209 25 00Of a thickness of 3 mm or more
- 7209 26 10Of a thickness exceeding 1 mm but less than 3 mm: ‘Electrical’
- 7209 26 90Of a thickness exceeding 1 mm but less than 3 mm: other
- 7209 27 10Of a thickness of 0,5 mm or more but not exceeding 1 mm: ‘Electrical’
- 7209 27 90Of a thickness of 0,5 mm or more but not exceeding 1 mm: other
- 7209 28 10Of a thickness of less than 0,5 mm: ‘Electrical’
- 7209 28 90Of a thickness of less than 0,5 mm: other
- 7209 90 20Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7209 90 80Flat-rolled products of iron or non-alloy steel, of a width: other, other
7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
- 7210 11 00Of a thickness of 0,5 mm or more
- 7210 12 20Of a thickness of less than 0,5 mm: tinplate
- 7210 12 80Of a thickness of less than 0,5 mm: other
- 7210 20 00Plated or coated with lead, including terne-plate
- 7210 30 00Electrolytically plated or coated with zinc
- 7210 41 00Otherwise plated or coated with zinc: corrugated
- 7210 49 00Otherwise plated or coated with zinc: other
- 7210 50 00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210 61 00Plated or coated with aluminium-zinc alloys
- 7210 69 00Plated or coated with aluminium: other
- 7210 70 10Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
- 7210 70 80Painted, varnished or coated with plastics: other
- 7210 90 30Flat-rolled products of iron or non-alloy steel, of a width: other, clad
- 7210 90 40Flat-rolled products of iron or non-alloy steel, of a width: other, tinned and printed
- 7210 90 80Flat-rolled products of iron or non-alloy steel, of a width: other, other
7211 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
- 7211 13 00Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- 7211 14 00Other, of a thickness of 4,75 mm or more
- 7211 19 00Not further worked than hot-rolled: other
- 7211 23 20Containing by weight less than 0,25 % of carbon: ‘Electrical’
- 7211 23 30Of a thickness of 0,35 mm or more
- 7211 23 80Of a thickness of less than 0,35 mm
- 7211 29 00Not further worked than cold-rolled (cold-reduced): other
- 7211 90 20Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7211 90 80Flat-rolled products of iron or non-alloy steel, of a width: other, other
7212 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
- 7212 10 10Tinplate, not further worked than surface-treated
- 7212 10 90Plated or coated with tin: other
- 7212 20 00Electrolytically plated or coated with zinc
- 7212 30 00Otherwise plated or coated with zinc
- 7212 40 20Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
- 7212 40 80Painted, varnished or coated with plastics: other
- 7212 50 20Plated or coated with chromium oxides or with chromium and chromium oxides
- 7212 50 30Plated or coated with chromium or nickel
- 7212 50 40Plated or coated with copper
- 7212 50 61Plated or coated with aluminium-zinc alloys
- 7212 50 69Plated or coated with aluminium: other
- 7212 50 90Otherwise plated or coated: other
- 7212 60 00Flat-rolled products of iron or non-alloy steel, of a width: clad
7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
- 7213 10 00Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7213 20 00Other, of free-cutting steel
- 7213 91 10Of a type used for concrete reinforcement
- 7213 91 20Of a type used for tyre cord
- 7213 91 41Containing by weight 0,06 % or less of carbon
- 7213 91 49Containing by weight more than 0,06 % but less than 0,25 % of carbon
- 7213 91 70Containing by weight 0,25 % or more but not more than 0,75 % of carbon
- 7213 91 90Containing by weight more than 0,75 % of carbon
- 7213 99 10Containing by weight less than 0,25 % of carbon
- 7213 99 90Containing by weight 0,25 % or more of carbon
7214 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
- 7214 10 00Other bars and rods of iron or non-alloy steel, not further: forged
- 7214 20 00Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
- 7214 30 00Other, of free-cutting steel
- 7214 91 10Containing by weight less than 0,25 % of carbon
- 7214 91 90Containing by weight 0,25 % or more of carbon
- 7214 99 10Of a type used for concrete reinforcement
- 7214 99 3180 mm or more
- 7214 99 39Less than 80 mm
- 7214 99 50Containing by weight less than 0,25 % of carbon: other
- 7214 99 7180 mm or more
- 7214 99 79Less than 80 mm
- 7214 99 95Containing by weight 0,25 % or more of carbon: other
7215 Other bars and rods of iron or non-alloy steel
- 7215 10 00Of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215 50 11Of rectangular (other than square) cross-section
- 7215 50 19Containing by weight less than 0,25 % of carbon: other
- 7215 50 80Containing by weight 0,25 % or more of carbon
- 7215 90 00Other bars and rods of iron or non-alloy steel: other
7216 Angles, shapes and sections of iron or non-alloy steel
- 7216 10 00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216 21 00L or T sections, not further worked than hot-rolled: l sections
- 7216 22 00L or T sections, not further worked than hot-rolled: t sections
- 7216 31 10Of a height of 80 mm or more but not exceeding 220 mm
- 7216 31 90Of a height exceeding 220 mm
- 7216 32 11With parallel flange faces
- 7216 32 19Of a height of 80 mm or more but not exceeding 220 mm: other
- 7216 32 91With parallel flange faces
- 7216 32 99Of a height exceeding 220 mm: other
- 7216 33 10Of a height of 80 mm or more but not exceeding 180 mm
- 7216 33 90Of a height exceeding 180 mm
- 7216 40 10L or T sections, not further worked than hot-rolled: l sections
- 7216 40 90L or T sections, not further worked than hot-rolled: t sections
- 7216 50 10With a cross-section which is capable of being enclosed in a square the side of which is 80 mm
- 7216 50 91Other angles, shapes and sections, not further worked than: other, bulb flats
- 7216 50 99Other angles, shapes and sections, not further worked than: other, other
- 7216 61 10C, L, U, Z, omega or open-ended sections
- 7216 61 90Obtained from flat-rolled products: other
- 7216 69 00Angles, shapes and sections, not further worked than: other
- 7216 91 10Cold-formed or cold-finished from flat-rolled products: profiled (ribbed) sheets
- 7216 91 80Cold-formed or cold-finished from flat-rolled products: other
- 7216 99 00Angles, shapes and sections of iron or non-alloy steel: other, other
7217 Wire of iron or non-alloy steel
- 7217 10 10With a maximum cross-sectional dimension of less than 0,8 mm
- 7217 10 31Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7217 10 39With a maximum cross-sectional dimension of 0,8 mm or more: other
- 7217 10 50Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 10 90Containing by weight 0,6 % or more of carbon
- 7217 20 10With a maximum cross-sectional dimension of less than 0,8 mm
- 7217 20 30With a maximum cross-sectional dimension of 0,8 mm or more
- 7217 20 50Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 20 90Containing by weight 0,6 % or more of carbon
- 7217 30 41Containing by weight less than 0,25 % of carbon: copper-coated
- 7217 30 49Containing by weight less than 0,25 % of carbon: other
- 7217 30 50Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 30 90Containing by weight 0,6 % or more of carbon
- 7217 90 20Containing by weight less than 0,25 % of carbon
- 7217 90 50Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 90 90Containing by weight 0,6 % or more of carbon
7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
- 7218 10 00Ingots and other primary forms
- 7218 91 10Containing by weight 2,5 % or more of nickel
- 7218 91 80Containing by weight less than 2,5 % of nickel
- 7218 99 11Rolled or obtained by continous casting
- 7218 99 19Stainless steel in ingots or other primary forms: other, other, of square cross-section, forged
- 7218 99 20Rolled or obtained by continuous casting
- 7218 99 80Stainless steel in ingots or other primary forms: other, other, other, forged
7219 Flat-rolled products of stainless steel, of a width of 600 mm or more
- 7219 11 00Of a thickness exceeding 10 mm
- 7219 12 10Containing by weight 2,5 % or more of nickel
- 7219 12 90Containing by weight less than 2,5 % of nickel
- 7219 13 10Containing by weight 2,5 % or more of nickel
- 7219 13 90Containing by weight less than 2,5 % of nickel
- 7219 14 10Containing by weight 2,5 % or more of nickel
- 7219 14 90Containing by weight less than 2,5 % of nickel
- 7219 21 10Containing by weight 2,5 % or more of nickel
- 7219 21 90Containing by weight less than 2,5 % of nickel
- 7219 22 10Containing by weight 2,5 % or more of nickel
- 7219 22 90Containing by weight less than 2,5 % of nickel
- 7219 23 00Of a thickness of 3 mm or more but less than 4,75 mm
- 7219 24 00Of a thickness of less than 3 mm
- 7219 31 00Of a thickness of 4,75 mm or more
- 7219 32 10Containing by weight 2,5 % or more of nickel
- 7219 32 90Containing by weight less than 2,5 % of nickel
- 7219 33 10Containing by weight 2,5 % or more of nickel
- 7219 33 90Containing by weight less than 2,5 % of nickel
- 7219 34 10Containing by weight 2,5 % or more of nickel
- 7219 34 90Containing by weight less than 2,5 % of nickel
- 7219 35 10Containing by weight 2,5 % or more of nickel
- 7219 35 90Containing by weight less than 2,5 % of nickel
- 7219 90 20Flat-rolled products of stainless steel, of a width of 600: other, perforated
- 7219 90 80Flat-rolled products of stainless steel, of a width of 600: other, other
7220 Flat-rolled products of stainless steel, of a width of less than 600 mm
- 7220 11 00Of a thickness of 4,75 mm or more
- 7220 12 00Of a thickness of less than 4,75 mm
- 7220 20 212,5 % or more of nickel
- 7220 20 29Less than 2,5 % of nickel
- 7220 20 412,5 % or more of nickel
- 7220 20 49Less than 2,5 % of nickel
- 7220 20 812,5 % or more of nickel
- 7220 20 89Less than 2,5 % of nickel
- 7220 90 20Flat-rolled products of stainless steel, of a width of less: other, perforated
- 7220 90 80Flat-rolled products of stainless steel, of a width of less: other, other
7221 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
- 7222 11 112,5 % or more of nickel
- 7222 11 19Less than 2,5 % of nickel
- 7222 11 812,5 % or more of nickel
- 7222 11 89Less than 2,5 % of nickel
- 7222 19 10Containing by weight 2,5 % or more of nickel
- 7222 19 90Containing by weight less than 2,5 % of nickel
- 7222 20 112,5 % or more of nickel
- 7222 20 19Less than 2,5 % of nickel
- 7222 20 212,5 % or more of nickel
- 7222 20 29Less than 2,5 % of nickel
- 7222 20 312,5 % or more of nickel
- 7222 20 39Less than 2,5 % of nickel
- 7222 20 812,5 % or more of nickel
- 7222 20 89Less than 2,5 % of nickel
- 7222 30 512,5 % or more of nickel
- 7222 30 91Less than 2,5 % of nickel
- 7222 30 97Other bars and rods: other
- 7222 40 10Not further worked than hot-rolled, hot-drawn or extruded
- 7222 40 50Not further worked than cold-formed or cold-finished
- 7222 40 90Angles, shapes and sections: other
7223 Wire of stainless steel
- 7223 00 11Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium
- 7223 00 19Containing by weight 2,5 % or more of nickel: other
- 7223 00 91Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium
- 7223 00 99Containing by weight less than 2,5 % of nickel: other
7224 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
- 7224 10 10Ingots and other primary forms: of tool steel
- 7224 10 90Ingots and other primary forms: other
- 7224 90 02Other alloy steel in ingots or other primary forms: other, of tool steel
- 7224 90 03The width measuring less than twice the thickness: of high-speed steel
- 7224 90 05Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
- 7224 90 07The width measuring less than twice the thickness: other
- 7224 90 14Hot-rolled or obtained by continuous casting: other
- 7224 90 18Of rectangular (including square) cross-section: forged
- 7224 90 31Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7224 90 38Hot-rolled or obtained by continuous casting: other
- 7224 90 90Other alloy steel in ingots or other primary forms: other, other, other, forged
7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more
- 7225 11 00Flat-rolled products of other alloy steel, of a width: of silicon-electrical steel, grain-oriented
- 7225 19 10Flat-rolled products of other alloy steel, of a width: of silicon-electrical steel, other, hot-rolled
- 7225 19 90Flat-rolled products of other alloy steel, of a width: of silicon-electrical steel, other, cold-rolled
- 7225 30 10Other, not further worked than hot-rolled, in coils: of tool steel
- 7225 30 30Other, not further worked than hot-rolled, in coils: of high-speed steel
- 7225 30 90Other, not further worked than hot-rolled, in coils: other
- 7225 40 12Other, not further worked than hot-rolled, not in coils: of tool steel
- 7225 40 15Other, not further worked than hot-rolled, not in coils: of high-speed steel
- 7225 40 40Of a thickness exceeding 10 mm
- 7225 40 60Of a thickness of 4,75 mm or more but not exceeding 10 mm
- 7225 40 90Of a thickness of less than 4,75 mm
- 7225 50 20Other, not further worked than cold-rolled (cold-reduced): of high-speed steel
- 7225 50 80Other, not further worked than cold-rolled (cold-reduced): other
- 7225 91 00Electrolytically plated or coated with zinc
- 7225 92 00Otherwise plated or coated with zinc
- 7225 99 00Flat-rolled products of other alloy steel, of a width: other, other
7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm
- 7226 11 00Flat-rolled products of other alloy steel, of a width: of silicon-electrical steel, grain-oriented
- 7226 19 10Not further worked than hot-rolled
- 7226 19 80Flat-rolled products of other alloy steel, of a width: of silicon-electrical steel, other, other
- 7226 20 00Flat-rolled products of other alloy steel, of a width: of high-speed steel
- 7226 91 20Not further worked than hot-rolled: of tool steel
- 7226 91 91Of a thickness of 4,75 mm or more
- 7226 91 99Of a thickness of less than 4,75 mm
- 7226 92 00Not further worked than cold-rolled (cold-reduced)
- 7226 99 10Electrolytically plated or coated with zinc
- 7226 99 30Otherwise plated or coated with zinc
- 7226 99 70Flat-rolled products of other alloy steel, of a width: other, other, other
7227 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
- 7227 10 00Bars and rods, hot-rolled, in irregularly wound coils: of high-speed steel
- 7227 20 00Bars and rods, hot-rolled, in irregularly wound coils: of silico-manganese steel
- 7227 90 10Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
- 7227 90 50Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7227 90 95Bars and rods, hot-rolled, in irregularly wound coils: other, other
7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
- 7228 10 20Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 10 50Bars and rods, of high-speed steel: forged
- 7228 10 90Bars and rods, of high-speed steel: other
- 7228 20 10Of rectangular (other than square) cross-section, hot-rolled on four faces
- 7228 20 91Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 20 99Bars and rods, of silico-manganese steel: other, other
- 7228 30 20Other bars and rods, not further worked than hot-rolled: of tool steel
- 7228 30 41Of circular cross-section of a diameter of 80 mm or more
- 7228 30 49Containing by weight 0,9 % or more but not more than 1,15 %: other
- 7228 30 6180 mm or more
- 7228 30 69Less than 80 mm
- 7228 30 70Of rectangular (other than square) cross-section, hot-rolled on four faces
- 7228 30 89Other bars and rods, not further worked than hot-rolled: other, other
- 7228 40 10Other bars and rods, not further worked than forged: of tool steel
- 7228 40 90Other bars and rods, not further worked than forged: other
- 7228 50 20Other bars and rods, not further worked than cold-formed: of tool steel
- 7228 50 40Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7228 50 6180 mm or more
- 7228 50 69Less than 80 mm
- 7228 50 80Other bars and rods, not further worked than cold-formed: other, other
- 7228 60 20Other bars and rods: of tool steel
- 7228 60 80Other bars and rods: other
- 7228 70 10Not further worked than hot-rolled, hot-drawn or extruded
- 7228 70 90Angles, shapes and sections: other
- 7228 80 00Hollow drill bars and rods
7229 Wire of other alloy steel
- 7229 20 00Wire of other alloy steel: of silico-manganese steel
- 7229 90 20Wire of other alloy steel: other, of high-speed steel
- 7229 90 50Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7229 90 90Wire of other alloy steel: other, other