Customs Tariff of North Macedonia
Customs Tariff of North Macedonia, chapter 72: Iron and steel
- 344Tariff lines
- 0%–10%Rate
Chapter 72 has 344 lines in the Customs Tariff of North Macedonia, spread over 29 headings.
Rates run from 0% to 10%, averaging 0.4%; 303 lines are duty-free.
Heading 7228, other bars and rods of other alloy steel, is divided furthest: 25 lines.
The most common rate is zero, on 303 lines.
The highest is 10% on 7216 91 10 00 (cold-formed or cold-finished from flat-rolled products).
7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms
- 7201 10 11 00Containing by weight 1 % or less of silicon
- 7201 10 19 00Containing by weight more than 1 % of silicon
- 7201 10 30 00Containing by weight not less than 0,1 % but less than 0,4 % of manganese
- 7201 10 90 00Containing by weight less than 0,1 % of manganese
- 7201 20 00 00Non-alloy pig iron containing by weight more than 0,5 % of phosphorus
- 7201 50 10 00Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium
- 7201 50 90 00Alloy pig iron; spiegeleisen: other
7202 Ferro-alloys
- 7202 11 20 00With a granulometry not exceeding 5 mm and a manganese content by weight exceed- ing 65 %
- 7202 11 80 00Containing by weight more than 2 % of carbon: other
- 7202 19 00 00Ferro-alloys, other
- 7202 21 00 00Containing by weight more than 55 % of silicon
- 7202 29 10 00Containing by weight 4 % or more but not more than 10 % of magnesium
- 7202 29 90 00Ferro-alloys, other, other
- 7202 30 00 00Ferro-alloys, ferro-silico-manganese
- 7202 41 10 00Containing by weight more than 4 % but not more than 6 % of carbon
- 7202 41 90 00Containing by weight more than 6 % of carbon
- 7202 49 10 00Containing by weight not more than 0,05 % of carbon
- 7202 49 50 00Containing by weight more than 0,05 % but not more than 0,5 % of carbon
- 7202 49 90 00Containing by weight more than 0,5 % but not more than 4 % of carbon
- 7202 50 00 00Ferro-alloys, ferro-silico-chromium
- 7202 60 00 00Ferro-alloys, ferro-nickel
- 7202 70 00 00Ferro-alloys, ferro-molybdenum
- 7202 80 00 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten
- 7202 91 00 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-titanium and ferro-silico-titanium
- 7202 92 00 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-vanadium
- 7202 93 00 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-niobium
- 7202 99 10 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other, ferro-phosphorus
- 7202 99 30 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other, ferro-silico-magnesium
- 7202 99 80 00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other, other
7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel
- 7204 10 00 00Waste and scrap of cast iron
- 7204 21 10 00Containing by weight 8 % or more of nickel
- 7204 21 90 00Waste and scrap of cast iron: of stainless steel, other
- 7204 29 00 00Waste and scrap of cast iron: other
- 7204 30 00 00Waste and scrap of tinned iron or steel
- 7204 41 10 00Turnings, shavings, chips, milling waste, sawdust and filings
- 7204 41 91 00Turnings, shavings, chips, milling waste, sawdust: in bundles
- 7204 41 99 00Turnings, shavings, chips, milling waste, sawdust: other
- 7204 49 10 00Waste and scrap of tinned iron or steel: other, fragmentised (shredded)
- 7204 49 30 00Waste and scrap of tinned iron or steel: other, fragmentised (shredded), in bundles
- 7204 49 90 00Waste and scrap of tinned iron or steel: other, fragmentised (shredded), other
- 7204 50 00 00Ferrous waste and scrap: remelting scrap ingots
7205 Granules and powders, of pig iron, spiegeleisen, iron or steel
7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)
7207 Semi-finished products of iron or non-alloy steel
- 7207 11 11 00Of rectangular: of free-cutting steel
- 7207 11 14 00Of a thickness not exceeding 130 mm
- 7207 11 16 00Of a thickness exceeding 130 mm
- 7207 11 90 00Of rectangular: forged
- 7207 12 10 00Rolled or obtained by continuous casting
- 7207 12 90 00Other, of rectangular (other than square) cross-section: forged
- 7207 19 12 00Rolled or obtained by continuous casting
- 7207 19 19 00Semi-finished products of iron or non-alloy steel: other, forged
- 7207 19 80 00Semi-finished products of iron or non-alloy steel: other, other
- 7207 20 11 00Containing by weight 0,25 % or more of carbon: of free-cutting steel
- 7207 20 15 000,25 % or more but less than 0,6 % of carbon
- 7207 20 17 000,6 % or more of carbon
- 7207 20 19 00Containing by weight 0,25 % or more of carbon: forged
- 7207 20 32 00Rolled or obtained by continuous casting
- 7207 20 39 00Containing by weight 0,25 % or more of carbon: forged
- 7207 20 52 00Rolled or obtained by continuous casting
- 7207 20 59 00Containing by weight 0,25 % or more of carbon: forged
- 7207 20 80 00Containing by weight 0,25 % or more of carbon: other
7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
- 7208 10 00 00In coils, not further worked than hot-rolled, with patterns in relief
- 7208 25 00 00Of a thickness of 4,75 mm or more
- 7208 26 00 00Of a thickness of 3 mm or more but less than 4,75 mm
- 7208 27 00 00Of a thickness of less than 3 mm
- 7208 36 00 00Of a thickness exceeding 10 mm
- 7208 37 00 00Of a thickness of 4,75 mm or more but not exceeding 10 mm
- 7208 38 00 00Of a thickness of 3 mm or more but less than 4,75 mm
- 7208 39 00 00Of a thickness of less than 3 mm
- 7208 40 00 00Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208 51 20 00Of a thickness exceeding 15 mm
- 7208 51 91 002 050 mm or more
- 7208 51 98 00Less than 2 050 mm
- 7208 52 10 00Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
- 7208 52 91 002 050 mm or more
- 7208 52 99 00Less than 2 050 mm
- 7208 53 10 00Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more
- 7208 53 90 00Of a thickness of 3 mm or more but less than 4,75 mm: other
- 7208 54 00 00Of a thickness of less than 3 mm
- 7208 90 20 00Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7208 90 80 00Flat-rolled products of iron or non-alloy steel, of a width: other, other
7209 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
- 7209 15 00 00Of a thickness of 3 mm or more
- 7209 16 10 00Of a thickness exceeding 1 mm but less than 3 mm: 'Electrical'
- 7209 16 90 00Of a thickness exceeding 1 mm but less than 3 mm: other
- 7209 17 10 00Of a thickness of 0,5 mm or more but not exceeding 1 mm: 'Electrical'
- 7209 17 90 00Of a thickness of 0,5 mm or more but not exceeding 1 mm: other
- 7209 18 10 00Of a thickness of less than 0,5 mm: 'Electrical'
- 7209 18 91 00Of a thickness of 0,35 mm or more but less than 0,5 mm
- 7209 18 99 00Of a thickness of less than 0,35 mm
- 7209 25 00 00Of a thickness of 3 mm or more
- 7209 26 10 00Of a thickness exceeding 1 mm but less than 3 mm: 'Electrical'
- 7209 26 90 00Of a thickness exceeding 1 mm but less than 3 mm: other
- 7209 27 10 00Of a thickness of 0,5 mm or more but not exceeding 1 mm: 'Electrical'
- 7209 27 90 00Of a thickness of 0,5 mm or more but not exceeding 1 mm: other
- 7209 28 10 00Of a thickness of less than 0,5 mm: 'Electrical'
- 7209 28 90 00Of a thickness of less than 0,5 mm: other
- 7209 90 20 00Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7209 90 80 00Flat-rolled products of iron or non-alloy steel, of a width: other, other
7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
- 7210 11 00 00Of a thickness of 0,5 mm or more
- 7210 12 20 00Of a thickness of less than 0,5 mm: tinplate
- 7210 12 80 00Of a thickness of less than 0,5 mm: other
- 7210 20 00 00Plated or coated with lead, including terne-plate
- 7210 30 00 00Electrolytically plated or coated with zinc
- 7210 41 00 00Electrolytically plated or coated with zinc: corrugated
- 7210 49 00 00Electrolytically plated or coated with zinc: other
- 7210 50 00 00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210 61 00 00Plated or coated with aluminium-zinc alloys
- 7210 69 00 00Plated or coated with chromium oxides or with chromium: other
- 7210 70 10 00Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
- 7210 70 80 00Painted, varnished or coated with plastics: other
- 7210 90 30 00Flat-rolled products of iron or non-alloy steel, of a width: other, clad
- 7210 90 40 00Flat-rolled products of iron or non-alloy steel, of a width: other, tinned and printed
- 7210 90 80 00Flat-rolled products of iron or non-alloy steel, of a width: other, other
7211 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
- 7211 13 00 00Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- 7211 14 00 00Other, of a thickness of 4,75 mm or more
- 7211 19 00 00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211 23 20 00Containing by weight less than 0,25 % of carbon: 'Electrical'
- 7211 23 30 00Of a thickness of 0,35 mm or more
- 7211 23 80 00Of a thickness of less than 0,35 mm
- 7211 29 00 00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211 90 20 00Flat-rolled products of iron or non-alloy steel, of a width: other, perforated
- 7211 90 80 00Flat-rolled products of iron or non-alloy steel, of a width: other, other
7212 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
- 7212 10 10 00Tinplate, not further worked than surface-treated
- 7212 10 90 00Plated or coated with tin: other
- 7212 20 00 00Electrolytically plated or coated with zinc
- 7212 30 00 00Otherwise plated or coated with zinc
- 7212 40 20 00Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
- 7212 40 80 00Painted, varnished or coated with plastics: other
- 7212 50 20 00Plated or coated with chromium oxides or with chromium and chromium oxides
- 7212 50 30 00Plated or coated with chromium or nickel
- 7212 50 40 00Plated or coated with copper
- 7212 50 61 00Plated or coated with aluminium-zinc alloys
- 7212 50 69 00Plated or coated with copper: other
- 7212 50 90 00Otherwise plated or coated: other
- 7212 60 00 00Flat-rolled products of iron or non-alloy steel, of a width: clad
7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
- 7213 10 00 00Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7213 20 00 00Other, of free-cutting steel
- 7213 91 10 00Of a type used for concrete reinforcement
- 7213 91 20 00Of a type used for tyre cord
- 7213 91 41 00Containing by weight 0,06 % or less of carbon
- 7213 91 49 00Containing by weight more than 0,06 % but less than 0,25 % of carbon
- 7213 91 70 00Containing by weight 0,25 % or more but not more than 0,75 % of carbon
- 7213 91 90 00Containing by weight more than 0,75 % of carbon
- 7213 99 10 00Containing by weight less than 0,25 % of carbon
- 7213 99 90 00Containing by weight 0,25 % or more of carbon
7214 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
- 7214 10 00 00Other bars and rods of iron or non-alloy steel, not further: forged
- 7214 20 00 00Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
- 7214 30 00 00Other, of free-cutting steel
- 7214 91 10 00Containing by weight less than 0,25 % of carbon
- 7214 91 90 00Containing by weight 0,25 % or more of carbon
- 7214 99 10 00Of a type used for concrete reinforcement
- 7214 99 31 0080 mm or more
- 7214 99 39 00Less than 80 mm
- 7214 99 50 00Other, of free-cutting steel: other, other
- 7214 99 71 0080 mm or more
- 7214 99 79 00Less than 80 mm
- 7214 99 95 00Other, of free-cutting steel: other, other
7215 Other bars and rods of iron or non-alloy steel
- 7215 10 00 00Of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215 50 11 00Of rectangular (other than square) cross-section
- 7215 50 19 00Other, not further worked than cold-formed or cold-finished: other
- 7215 50 80 00Containing by weight 0,25 % or more of carbon
- 7215 90 00 00Other bars and rods of iron or non-alloy steel: other
7216 Angles, shapes and sections of iron or non-alloy steel
- 7216 10 00 00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216 21 00 00U, I or H sections, not further worked than hot-rolled: l sections
- 7216 22 00 00U, I or H sections, not further worked than hot-rolled: t sections
- 7216 31 10 00Of a height of 80 mm or more but not exceeding 220 mm
- 7216 31 90 00Of a height exceeding 220 mm
- 7216 32 11 00With parallel flange faces
- 7216 32 19 00U, I or H sections, not further worked than hot-rolled: i sections, other
- 7216 32 91 00With parallel flange faces
- 7216 32 99 00U, I or H sections, not further worked than hot-rolled: i sections, other
- 7216 33 10 00Of a height of 80 mm or more but not exceeding 180 mm
- 7216 33 90 00Of a height exceeding 180 mm
- 7216 40 10 00L or T sections, not further worked than hot-rolled: l sections
- 7216 40 90 00L or T sections, not further worked than hot-rolled: t sections
- 7216 50 10 00With a cross-section which is capable of being enclosed in a square the side of which is 80 mm
- 7216 50 91 00With a cross-section which is capable of being enclosed: bulb flats
- 7216 50 99 00With a cross-section which is capable of being enclosed: other
- 7216 61 10 00C, L, U, Z, omega or open-ended sections
- 7216 61 90 00Obtained from flat-rolled products: other
- 7216 69 00 00Other angles, shapes and sections, not further worked than: other
- 7216 91 10 00Cold-formed or cold-finished from flat-rolled products: profiled (ribbed) sheets
- 7216 91 80 00Cold-formed or cold-finished from flat-rolled products: other
- 7216 99 00 00Other angles, shapes and sections, not further worked than: other
7217 Wire of iron or non-alloy steel
- 7217 10 10 00With a maximum cross-sectional dimension of less than 0,8 mm
- 7217 10 31 00Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7217 10 39 00With a maximum cross-sectional dimension of less than 0,8 mm: other
- 7217 10 50 00Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 10 90 00Containing by weight 0,6 % or more of carbon
- 7217 20 10 00With a maximum cross-sectional dimension of less than 0,8 mm
- 7217 20 30 00With a maximum cross-sectional dimension of 0,8 mm or more
- 7217 20 50 00Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 20 90 00Containing by weight 0,6 % or more of carbon
- 7217 30 41 00Plated or coated with other base metals: copper-coated
- 7217 30 49 00Plated or coated with other base metals: other
- 7217 30 50 00Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 30 90 00Containing by weight 0,6 % or more of carbon
- 7217 90 20 00Containing by weight less than 0,25 % of carbon
- 7217 90 50 00Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217 90 90 00Containing by weight 0,6 % or more of carbon
7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
- 7218 10 00 00Ingots and other primary forms
- 7218 91 10 00Containing by weight 2,5 % or more of nickel
- 7218 91 80 00Containing by weight less than 2,5 % of nickel
- 7218 99 11 00Rolled or obtained by continous casting
- 7218 99 19 00Ingots and other primary forms: other, forged
- 7218 99 20 00Rolled or obtained by continuous casting
- 7218 99 80 00Ingots and other primary forms: other, forged
7219 Flat-rolled products of stainless steel, of a width of 600 mm or more
- 7219 11 00 00Of a thickness exceeding 10 mm
- 7219 12 10 00Containing by weight 2,5 % or more of nickel
- 7219 12 90 00Containing by weight less than 2,5 % of nickel
- 7219 13 10 00Containing by weight 2,5 % or more of nickel
- 7219 13 90 00Containing by weight less than 2,5 % of nickel
- 7219 14 10 00Containing by weight 2,5 % or more of nickel
- 7219 14 90 00Containing by weight less than 2,5 % of nickel
- 7219 21 10 00Containing by weight 2,5 % or more of nickel
- 7219 21 90 00Containing by weight less than 2,5 % of nickel
- 7219 22 10 00Containing by weight 2,5 % or more of nickel
- 7219 22 90 00Containing by weight less than 2,5 % of nickel
- 7219 23 00 00Of a thickness of 3 mm or more but less than 4,75 mm
- 7219 24 00 00Of a thickness of less than 3 mm
- 7219 31 00 00Of a thickness of 4,75 mm or more
- 7219 32 10 00Containing by weight 2,5 % or more of nickel
- 7219 32 90 00Containing by weight less than 2,5 % of nickel
- 7219 33 10 00Containing by weight 2,5 % or more of nickel
- 7219 33 90 00Containing by weight less than 2,5 % of nickel
- 7219 34 10 00Containing by weight 2,5 % or more of nickel
- 7219 34 90 00Containing by weight less than 2,5 % of nickel
- 7219 35 10 00Containing by weight 2,5 % or more of nickel
- 7219 35 90 00Containing by weight less than 2,5 % of nickel
- 7219 90 20 00Flat-rolled products of stainless steel, of a width of 600: other, perforated
- 7219 90 80 00Flat-rolled products of stainless steel, of a width of 600: other, other
7220 Flat-rolled products of stainless steel, of a width of less than 600 mm
- 7220 11 00 00Of a thickness of 4,75 mm or more
- 7220 12 00 00Of a thickness of less than 4,75 mm
- 7220 20 21 002,5 % or more of nickel
- 7220 20 29 00Less than 2,5 % of nickel
- 7220 20 41 002,5 % or more of nickel
- 7220 20 49 00Less than 2,5 % of nickel
- 7220 20 81 002,5 % or more of nickel
- 7220 20 89 00Less than 2,5 % of nickel
- 7220 90 20 00Flat-rolled products of stainless steel, of a width of less: other, perforated
- 7220 90 80 00Flat-rolled products of stainless steel, of a width of less: other, other
7221 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
- 7222 11 11 002,5 % or more of nickel
- 7222 11 19 00Less than 2,5 % of nickel
- 7222 11 81 002,5 % or more of nickel
- 7222 11 89 00Less than 2,5 % of nickel
- 7222 19 10 00Containing by weight 2,5 % or more of nickel
- 7222 19 90 00Containing by weight less than 2,5 % of nickel
- 7222 20 11 002,5 % or more of nickel
- 7222 20 19 00Less than 2,5 % of nickel
- 7222 20 21 002,5 % or more of nickel
- 7222 20 29 00Less than 2,5 % of nickel
- 7222 20 31 002,5 % or more of nickel
- 7222 20 39 00Less than 2,5 % of nickel
- 7222 20 81 002,5 % or more of nickel
- 7222 20 89 00Less than 2,5 % of nickel
- 7222 30 51 002,5 % or more of nickel
- 7222 30 91 00Less than 2,5 % of nickel
- 7222 30 97 00Other bars and rods: other
- 7222 40 10 00Not further worked than hot-rolled, hot-drawn or extruded
- 7222 40 50 00Not further worked than cold-formed or cold-finished
- 7222 40 90 00Angles, shapes and sections: other
7223 Wire of stainless steel
- 7223 00 11 00Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium
- 7223 00 19 00Wire of stainless steel: other
- 7223 00 91 00Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium
- 7223 00 99 00Wire of stainless steel: other
7224 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
- 7224 10 10 00Ingots and other primary forms: of tool steel
- 7224 10 90 00Ingots and other primary forms: other
- 7224 90 02 00Other alloy steel in ingots or other primary forms: other, of tool steel
- 7224 90 03 00Other alloy steel in ingots or other primary forms: other, of tool steel, of high-speed steel
- 7224 90 05 00Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
- 7224 90 07 00Other alloy steel in ingots or other primary forms: other, of tool steel, other
- 7224 90 14 00Other alloy steel in ingots or other primary forms: other, of tool steel, other
- 7224 90 18 00Other alloy steel in ingots or other primary forms: other, of tool steel, forged
- 7224 90 31 00Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7224 90 38 00Other alloy steel in ingots or other primary forms: other, of tool steel, forged, other
- 7224 90 90 00Other alloy steel in ingots or other primary forms: other, of tool steel, forged
7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more
- 7225 11 00 00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7225 19 10 00Flat-rolled products of other alloy steel, of a width: other, hot-rolled
- 7225 19 90 00Flat-rolled products of other alloy steel, of a width: other, cold-rolled
- 7225 30 10 00Other, not further worked than hot-rolled, in coils: of tool steel
- 7225 30 30 00Other, not further worked than hot-rolled, in coils: of high-speed steel
- 7225 30 90 00Other, not further worked than hot-rolled, in coils: other
- 7225 40 12 00Other, not further worked than hot-rolled, not in coils: of tool steel
- 7225 40 15 00Other, not further worked than hot-rolled, not in coils: of high-speed steel
- 7225 40 40 00Of a thickness exceeding 10 mm
- 7225 40 60 00Of a thickness of 4,75 mm or more but not exceeding 10 mm
- 7225 40 90 00Of a thickness of less than 4,75 mm
- 7225 50 20 00Other, not further worked than cold-rolled (cold-reduced): of high-speed steel
- 7225 50 80 00Other, not further worked than cold-rolled (cold-reduced): other
- 7225 91 00 00Electrolytically plated or coated with zinc
- 7225 92 00 00Otherwise plated or coated with zinc
- 7225 99 00 00Other, not further worked than cold-rolled (cold-reduced): other
7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm
- 7226 11 00 00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7226 19 10 00Not further worked than hot-rolled
- 7226 19 80 00Flat-rolled products of other alloy steel, of a width: other, other
- 7226 20 00 00Flat-rolled products of other alloy steel, of a width: of high-speed steel
- 7226 91 20 00Not further worked than hot-rolled: of tool steel
- 7226 91 91 00Of a thickness of 4,75 mm or more
- 7226 91 99 00Of a thickness of less than 4,75 mm
- 7226 92 00 00Not further worked than cold-rolled (cold-reduced)
- 7226 99 10 00Electrolytically plated or coated with zinc
- 7226 99 30 00Otherwise plated or coated with zinc
- 7226 99 70 00Flat-rolled products of other alloy steel, of a width: of high-speed steel, other, other
7227 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
- 7227 10 00 00Bars and rods, hot-rolled, in irregularly wound coils: of high-speed steel
- 7227 20 00 00Bars and rods, hot-rolled, in irregularly wound coils: of silico-manganese steel
- 7227 90 10 00Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
- 7227 90 50 00Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7227 90 95 00Bars and rods, hot-rolled, in irregularly wound coils: other, other
7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
- 7228 10 20 00Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 10 50 00Bars and rods, of high-speed steel: forged
- 7228 10 90 00Bars and rods, of high-speed steel: other
- 7228 20 10 00Of rectangular (other than square) cross-section, hot-rolled on four faces
- 7228 20 91 00Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228 20 99 00Of rectangular: other
- 7228 30 20 00Other bars and rods, not further worked than hot-rolled: of tool steel
- 7228 30 41 00Of circular cross-section of a diameter of 80 mm or more
- 7228 30 49 00Other bars and rods, not further worked than hot-rolled: of tool steel, other
- 7228 30 61 0080 mm or more
- 7228 30 69 00Less than 80 mm
- 7228 30 70 00Of rectangular (other than square) cross-section, hot-rolled on four faces
- 7228 30 89 00Other bars and rods, not further worked than hot-rolled: of tool steel, other
- 7228 40 10 00Other bars and rods, not further worked than forged: of tool steel
- 7228 40 90 00Other bars and rods, not further worked than forged: other
- 7228 50 20 00Other bars and rods, not further worked than cold-formed: of tool steel
- 7228 50 40 00Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7228 50 61 0080 mm or more
- 7228 50 69 00Less than 80 mm
- 7228 50 80 00Containing by weight 0,9 % or more but not more than 1,15 %: other
- 7228 60 20 00Other bars and rods: of tool steel
- 7228 60 80 00Other bars and rods: other
- 7228 70 10 00Not further worked than hot-rolled, hot-drawn or extruded
- 7228 70 90 00Angles, shapes and sections: other
- 7228 80 00 00Hollow drill bars and rods
7229 Wire of other alloy steel
- 7229 20 00 00Wire of other alloy steel: of silico-manganese steel
- 7229 90 20 00Wire of other alloy steel: other, of high-speed steel
- 7229 90 50 00Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7229 90 90 00Wire of other alloy steel: other, other