Swiss Customs Tariff (Tares)
Swiss Customs Tariff (Tares), chapter 72: Iron and steel
- 167Tariff lines
- FreeRate
Chapter 72 has 167 lines in the Swiss Customs Tariff (Tares), spread over 29 headings.
Rates run at duty-free; 167 lines are duty-free.
The most detailed heading is 7202 (ferro-alloys) with 15 lines.
The most common rate is zero, on 167 lines.
7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms
7202 Ferro-alloys
- 7202.11.00containing by weight more than 2% of carbon
- 7202.19.00Ferro-alloys, other
- 7202.21.00containing by weight more than 55% of silicon
- 7202.29.00Ferro-alloys, other
- 7202.30.00Ferro-alloys, ferro-silico-manganese
- 7202.41.00containing by weight more than 4% of carbon
- 7202.49.00Ferro-alloys, ferro-silico-manganese, other
- 7202.50.00Ferro-alloys, ferro-silico-chromium
- 7202.60.00Ferro-alloys, ferro-nickel
- 7202.70.00Ferro-alloys, ferro-molybdenum
- 7202.80.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten
- 7202.91.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-titanium and ferro-silico-titanium
- 7202.92.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-vanadium
- 7202.93.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, ferro-niobium
- 7202.99.00Ferro-alloys, ferro-tungsten and ferro-silico-tungsten, other
7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel
- 7204.10.00waste and scrap of cast iron
- 7204.21.00Waste and scrap of cast iron: of stainless steel
- 7204.29.00Waste and scrap of cast iron: other
- 7204.30.00waste and scrap of tinned iron or steel
- 7204.41.00turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
- 7204.49.00Waste and scrap of tinned iron or steel: other
- 7204.50.00Ferrous waste and scrap: remelting scrap ingots
7205 Granules and powders, of pig iron, spiegeleisen, iron or steel
7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)
7207 Semi-finished products of iron or non-alloy steel
7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
- 7208.10.00in coils, not further worked than hot-rolled, with patterns in relief
- 7208.25.00of a thickness of 4.75 mm or more
- 7208.26.00of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27.00of a thickness of less than 3 mm
- 7208.36.00of a thickness exceeding 10 mm
- 7208.37.00of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.38.00of a thickness of 3 mm or more but less than 4.75 mm
- 7208.39.00of a thickness of less than 3 mm
- 7208.40.00not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.51.00of a thickness exceeding 10 mm
- 7208.52.00of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.53.00of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54.00of a thickness of less than 3 mm
- 7208.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7209 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
- 7209.15.00of a thickness of 3 mm or more
- 7209.16.00of a thickness exceeding 1 mm but less than 3 mm
- 7209.17.00of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.18.00of a thickness of less than 0.5 mm
- 7209.25.00of a thickness of 3 mm or more
- 7209.26.00of a thickness exceeding 1 mm but less than 3 mm
- 7209.27.00of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7209.28.00of a thickness of less than 0.5 mm
- 7209.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
- 7210.11.00of a thickness of 0.5 mm or more
- 7210.12.00of a thickness of less than 0.5 mm
- 7210.20.00plated or coated with lead, including terne-plate
- 7210.30.00electrolytically plated or coated with zinc
- 7210.41.00Electrolytically plated or coated with zinc: corrugated
- 7210.49.00Electrolytically plated or coated with zinc: other
- 7210.50.00plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61.00plated or coated with aluminium-zinc alloys
- 7210.69.00Plated or coated with chromium oxides or with chromium: other
- 7210.70.00painted, varnished or coated with plastics
- 7210.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7211 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
- 7211.13.00rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- 7211.14.00other, of a thickness of 4.75 mm or more
- 7211.19.00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211.23.00containing by weight less than 0.25% of carbon
- 7211.29.00Flat-rolled products of iron or non-alloy steel, of a width: other
- 7211.90.00Flat-rolled products of iron or non-alloy steel, of a width: other
7212 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7214 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
- 7214.10.00Other bars and rods of iron or non-alloy steel, not further: forged
- 7214.20.00containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
- 7214.30.00other, of free-cutting steel
- 7214.91.00of rectangular (other than square) cross-section
- 7214.99.00Other, of free-cutting steel: other
7215 Other bars and rods of iron or non-alloy steel
7216 Angles, shapes and sections of iron or non-alloy steel
- 7216.10.00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.21.00U, I or H sections, not further worked than hot-rolled: l sections
- 7216.22.00U, I or H sections, not further worked than hot-rolled: t sections
- 7216.31.00U, I or H sections, not further worked than hot-rolled: u sections
- 7216.32.00U, I or H sections, not further worked than hot-rolled: i sections
- 7216.33.00U, I or H sections, not further worked than hot-rolled: h sections
- 7216.40.00L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
- 7216.50.00other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
- 7216.61.00obtained from flat-rolled products
- 7216.69.00Other angles, shapes and sections, not further worked than: other
- 7216.91.00cold-formed or cold-finished from flat-rolled products
- 7216.99.00Other angles, shapes and sections, not further worked than: other
7217 Wire of iron or non-alloy steel
7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7219 Flat-rolled products of stainless steel, of a width of 600 mm or more
- 7219.11.00of a thickness exceeding 10 mm
- 7219.12.00of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13.00of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.00of a thickness of less than 3 mm
- 7219.21.00of a thickness exceeding 10 mm
- 7219.22.00of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23.00of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.00of a thickness of less than 3 mm
- 7219.31.00of a thickness of 4.75 mm or more
- 7219.32.00of a thickness of 3 mm or more but less than 4.75 mm
- 7219.33.00of a thickness exceeding 1 mm but less than 3 mm
- 7219.34.00of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7219.35.00of a thickness of less than 0.5 mm
- 7219.90.00Flat-rolled products of stainless steel, of a width of 600: other
7220 Flat-rolled products of stainless steel, of a width of less than 600 mm
7221 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
7223 Wire of stainless steel
7224 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more
- 7225.11.00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7225.19.00Flat-rolled products of other alloy steel, of a width: other
- 7225.30.00other, not further worked than hot-rolled, in coils
- 7225.40.00other, not further worked than hot-rolled, not in coils
- 7225.50.00other, not further worked than cold-rolled (cold-reduced)
- 7225.91.00electrolytically plated or coated with zinc
- 7225.92.00otherwise plated or coated with zinc
- 7225.99.00Other, not further worked than cold-rolled (cold-reduced): other
7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm
- 7226.11.00Flat-rolled products of other alloy steel, of a width: grain-oriented
- 7226.19.00Flat-rolled products of other alloy steel, of a width: other
- 7226.20.00of high speed steel
- 7226.91.00not further worked than hot-rolled
- 7226.92.00not further worked than cold-rolled (cold-reduced)
- 7226.99.00Of high speed steel: other
7227 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
- 7228.10.00bars and rods, of high speed steel
- 7228.20.00bars and rods, of silico-manganese steel
- 7228.30.00other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
- 7228.40.00other bars and rods, not further worked than forged
- 7228.50.00other bars and rods, not further worked than cold-formed or cold-finished
- 7228.60.00other bars and rods
- 7228.70.00angles, shapes and sections
- 7228.80.00hollow drill bars and rods