Turkish Customs Tariff Schedule · GTİP code · HS 8481.80

8481.80.69.00.00

8481.80.69.00.00: Other taps, cocks and valves: Borular, kazanlar, tanklar, depolar ve benzeri diğer kaplar: diğer cihazlar, diğerleri, sürgülü valfler, diğerleri

Other taps, cocks and valves

✓ Can be used in a customs declaration Data: Turkish Customs Tariff Schedule, in force from 1 January 2026 · checked on 24 October 2026

This line has no official text in this language; it is shown in the language of its tariff.

  1. 8481 Borular, kazanlar, tanklar, depolar ve benzeri diğer kaplar için musluklar, valfler (vanalar) ve benzeri cihazlar (basınç düşürücü valfler ile termostatik kontrollü valfler dahil):
  2. 8481.80 Diğer cihazlar:
  3. Diğerleri:
  4. Diğerleri:
  5. Sürgülü valfler:
  6. 8481.80.69.00.00 Diğerleri

What you pay

Importing into Türkiye

Customs duty 2.2% standard rate
Additional duties and charges 1 additional measure Import requirements: 1
VAT 20 % standard rate; 10 % or 1 % for some goods
Duty calculatorCalculate duty and taxes →

Rates for Türkiye are the applied duties of the 2026 Import Regime Decision, as consolidated by the Ministry of Trade (amendments to August 2026). The additional customs duty (İGV) and, for some farm goods, the additional financial liability (EMY) come on top. Footnotes can lower a rate for named countries or periods: see the line page.

Additional duties and import rules

Charges on top of the customs duty, and rules the goods must meet at the border.

Additional duties and charges 1

  • Additional customs duty (İGV) 25%
    Applies to goods from
    all countries except United Arab Emirates, Austria, Belgium, Bulgaria, Cyprus, Czechia, Germany, Denmark, Estonia, Spain, Finland, France, Greece, Croatia, Hungary, Ireland, Italy, Lithuania, Luxembourg, Latvia, Malta, Netherlands, Poland, Portugal, Romania, Sweden, Slovenia, Slovakia, Switzerland, Iceland, Liechtenstein, Norway, Albania, Venezuela, United Kingdom, Bosnia & Herzegovina, Morocco, Faroe Islands, Palestinian Territories, Georgia, South Korea, Israel, Montenegro, Kosovo, North Macedonia, Malaysia, Egypt, Mauritius, Moldova, Serbia, Singapore, Chile, Tunisia, Qatar
    Legal act
    Karar 3351 (İGV), 2026

Import requirements 1

  • Import surveillanceDiğerleri · 10 ABD Doları/ (birim gümrük kıymeti; *Kg: Brüt ağırlık)
    Applies to goods from
    all countries
    In force
    from 9 April 2026
    Legal act
    Gözetim Tebliği 2026/37 (RG 09.04.2026, 33219)

Preferential rates by country

Agreement or schemeCountriesRate
standard rate (no agreement)—2.2%
Türkiye’s free trade agreements
Albania, Austria, Belgium, Bosnia & Herzegovina and 48 more

Albania, Austria, Belgium, Bosnia & Herzegovina, Bulgaria, Chile, Croatia, Cyprus, Czechia, Denmark, Egypt, Estonia, Faroe Islands, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Malaysia, Malta, Mauritius, Moldova, Montenegro, Morocco, Netherlands, North Macedonia, Norway, Palestinian Territories, Poland, Portugal, Romania, Serbia, Singapore, Slovakia, Slovenia, South Korea, Spain, Sweden, Switzerland, Tunisia, United Kingdom, Venezuela

 Free
GSP (least developed countries)
Afghanistan, Angola, Bangladesh, Benin and 44 more

Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Congo - Kinshasa, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mongolia, Mozambique, Myanmar (Burma), Nepal, Niger, Rwanda, São Tomé & Príncipe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Yemen, Zambia

 Free
GSP (developing countries)
Bolivia, Cape Verde, Congo - Brazzaville, Cook Islands and 10 more

Bolivia, Cape Verde, Congo - Brazzaville, Cook Islands, Kenya, Kyrgyzstan, Micronesia, Nigeria, Niue, Pakistan, Philippines, Sri Lanka, Tajikistan, Uzbekistan

 Free
Türkiye–United Arab Emirates agreement United Arab Emirates Free
Türkiye–Qatar agreement Qatar Free
GSP+ Free

Same subheading in other tariffs

8481.80 Taps, cocks, valves and similar appliances for pipes: other appliances

UK 2% Third-country duty 40 tariff lines EU 2.2% Third-country duty 17 tariff lines USA 2% – 5.6% General (MFN) 4 tariff lines · average 3.7% Canada Free General (MFN) 33 tariff lines Mexico Free – 15% General (MFN) 26 tariff lines · average 1.9% Brazil 12.6% – 20% General (MFN) 14 tariff lines · average 15.7% Argentina 12.6% – 18% General (MFN) 49 tariff lines · average 15.1% Peru Free General (MFN) 11 tariff lines New Zealand Free – 5% General (MFN) 25 tariff lines · average 4.4% Japan Free General (MFN) 3 tariff lines Taiwan Free – 5% General (MFN) 9 tariff lines · average 2.6% GCC 5% General (MFN) 11 tariff lines Switzerland Free General (MFN) 1 tariff line Norway Free General (MFN) 7 tariff lines North Macedonia 2.2% – 3% General (MFN) 17 tariff lines · average 3% Nigeria 10% General (MFN) 1 tariff line

Türkiye lines: 8481.80

Binding rulings for similar goods

Decisions of U.S. Customs and Border Protection (CROSS) and HMRC (Advance Tariff Rulings) on goods classified here. A ruling binds only its holder, but shows how the authorities classify similar goods. The descriptions are the authorities’ own, in English.

  • N364408 U.S. CBP 2 September 2026 · 8481.80.50.90

    The tariff classification and country of origin of a tire inflator

  • N364056 U.S. CBP 28 August 2026 · 8481.80.50.90

    The tariff classification of a ball valve and a duct band from Vietnam

  • N362925 U.S. CBP 31 July 2026 · 8481.80.90.50

    The tariff classification of a gas-line system from Canada

  • N360522 U.S. CBP 5 May 2026 · 8481.80.90.25

    The tariff classification of an active grille shutter from Thailand

  • 600016009 HMRC 17 September 2026 – 16 September 2029 · 8481 80 99 90

    A stainless steel marine air pipe head for fitting to ballast or fuel tanks on ships. The product is forged in a foundry and then machined. It incorporates an automatic closure mechanism which allows normal tank venting but closes to prevent seawater from entering the tank. Packaged - it will be…

  • 600014607 HMRC 23 January 2026 – 22 January 2029 · 8481 80 99 90

    The product is a cart, hose, reel, and spray gun set which is made plastic (Polyvinyl Chloride (PVC)) and steel. The cart has a height-adjustable handle and is green in colour. The spray gun has five different settings, from light mist to a jet spray for cars or windows. The spray gun allows the…

  • 600012766 HMRC 2 July 2025 – 1 July 2028 · 8481 80 99 90

    A Compact Auto Gas Control is typically a valve designed for controlling the flow of gas in appliances like boilers, furnaces, and water heaters. These valves are often used to manage the gas supply for lighting and supervising the main burner. They can be automatic, meaning they control gas flow…

  • 600012763 HMRC 11 June 2025 – 10 June 2028 · 8481 80 99 90

    A 1/2 inch Gas Valve. The gas valve is a device used to control the flow of gas to the burner. A signal is sent from the printed circuit board which opens the gas valve and allows the gas to flow through the valve and into the burner or pilot assembly depending on the model of appliance being used…

100 rulings in total for this code

Legal notes

Subheading notes

1. For the purposes of subheading 846520, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.

2. For the purposes of subheading 847149, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).

3. For the purposes of subheading 848120, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 848120 takes precedence over all other subheadings of heading 8481.

4. Subheading 848240 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Chapter notes: Chapter 84 →

GTİP code 8481.80.69.00.00 is a line of the Turkish Customs Tariff Schedule under HS subheading 8481.80 (taps, cocks, valves and similar appliances for pipes: other appliances).

The statutory rate is 2.2%.

For the same subheading, the UK duty is 2%, the EU duty is 2.2%, the US duty is 2%–5.6%, the Canada duty is free, the Mexico duty is 0%–15%, the Brazil duty is 12.6%–20%, the Argentina duty is 12.6%–18%, the Peru duty is free, the New Zealand duty is 0%–5%, the Japan duty is free, the Taiwan duty is 0%–5%, the GCC duty is 5%, the Switzerland duty is free, the Norway duty is free, the North Macedonia duty is 2.2%–3% and the Nigeria duty is 10%.

Türkiye imported goods of subheading 8481.80 worth US$1bn in 2024; the largest supplier was China.

Questions and answers

What is the Türkiye import duty for GTİP code 8481.80.69.00.00?

The statutory rate in the Turkish Customs Tariff Schedule is 2.2%. Preferential rates for goods from agreement countries, anti-dumping duties and VAT are not included.

Where does Türkiye import these goods from?

For subheading 8481.80 as a whole, the largest supplier in 2024 was China (US$181m), followed by Germany.

Download as CSV Follow changes (RSS)

Typical products

Everyday names, not part of the legal text.