UK Global Tariff
UK Global Tariff, chapter 38: Miscellaneous chemical products
- 501Tariff lines
- 0%–8%Rate
Chapter 38 has 501 lines in the UK Global Tariff, spread over 27 headings.
Rates run from 0% to 8%, averaging 4.1%; 131 lines are duty-free.
4 lines carry a specific or compound duty.
The most detailed heading is 3824 (prepared binders for foundry moulds or cores) with 158 lines.
The most common rate is 6%, on 273 lines.
The highest is 8% on 3809 10 10 00 (containing by weight less than 55% of such substances).
3801 Artificial graphite; colloidal or semi-colloidal graphite; preparations based on graphite or other carbon in the form of pastes, blocks, plates or other semi-manufactures
- 3801 10 10 00Powders containing not more than 0.05% of ash by weight
- 3801 10 90 15In blocks or cylinders with an apparent density of 1.5 g/cm³ or more and an electrical resistivity of 7.0 μ.ω.m or less with a nominal diameter of more than 350 mm
- 3801 10 90 85Artificial graphite: artificial graphite, other, other
- 3801 20 10 00Colloidal graphite in suspension in oil; semi-colloidal graphite
- 3801 20 90 00Colloidal or semi-colloidal graphite: other
- 3801 30 00 00Carbonaceous pastes for electrodes and similar pastes for furnace linings
- 3801 90 00 10Expandable graphite (cas rn 90387-90-9 and cas rn 12777-87-6)
- 3801 90 00 80In blocks or cylinders with an apparent density of 1.5 g/cm³ or more and an electrical resistivity of 7.0 μ.ω.m or less with a nominal diameter of more than 350 mm
- 3801 90 00 85Artificial graphite: other, other, other
3802 Activated carbon; activated natural mineral products; animal black, including spent animal black
- 3802 10 00 10Mixture of activated carbon and polyethylene, in form of powder
- 3802 10 00 40Chemically activated carbon for the absorption and desorption of vapors, in a defined or irregular shape with an effective butane capacity of 5 g butane / 100 ml or more (according to astm d 5228)
- 3802 10 00 90Activated carbon: activated carbon, other
- 3802 90 00 11Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products
- 3802 90 00 19Soda flux calcinated diatomaceous earth: other
- 3802 90 00 90Activated carbon: other, other
3803 Tall oil, whether or not refined
3804 Residual lyes from the manufacture of wood pulp, whether or not concentrated, desugared or chemically treated, including lignin sulphonates, but excluding tall oil of heading 3803
3805 Gum, wood or sulphate turpentine and other terpenic oils produced by the distillation or other treatment of coniferous woods; crude dipentene; sulphite turpentine and other crude para-cymene; pine oil containing alpha-terpineol as the main constituent
- 3805 10 10 00Gum, wood or sulphate turpentine oils: gum turpentine
- 3805 10 30 00Gum, wood or sulphate turpentine oils: wood turpentine
- 3805 10 90 00Gum, wood or sulphate turpentine oils: sulphate turpentine
- 3805 90 10 00Gum, wood or sulphate turpentine and other terpenic oils: other, pine oil
- 3805 90 90 00Gum, wood or sulphate turpentine and other terpenic oils: other, other
3806 Rosin and resin acids, and derivatives thereof; rosin spirit and rosin oils; run gums
- 3806 10 00 10Obtained from fresh oleoresins
- 3806 10 00 90Rosin and resin acids: other
- 3806 20 00 00Salts of rosin, of resin acids or of derivatives of rosin or resin acids, other than salts of rosin adducts
- 3806 30 00 00Rosin and resin acids, and derivatives thereof: ester gums
- 3806 90 00 00Rosin and resin acids, and derivatives thereof: other
3807 Wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewers' pitch and similar preparations based on rosin, resin acids or on vegetable pitch
3808 Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms or packings for retail sale or as preparations or articles (for example, sulphur-treated bands, wicks and candles, and fly-papers)
- 3808 52 00 00Ddt (iso) (clofenotane (inn)), in packings of a net weight content not exceeding 300 g
- 3808 59 00 10Preparation containing perfluorooctanesulfonic acid and its salts, used as pesticide (cas 1763-23-1)
- 3808 59 00 15Camphechlor and its preparations (cas 8001-35-2)
- 3808 59 00 20Preparation containing ddt (iso), used as pesticide (cas 50-29-3)
- 3808 59 00 30Preparation containing chlordane (iso), used as pesticide (cas 57-74-9)
- 3808 59 00 40Preparation containing lindane (iso, inn) (γ-hch (iso)), used as pesticide (cas 58-89-9)
- 3808 59 00 50Preparation containing dieldrin (iso), used as pesticide (cas 60-57-1)
- 3808 59 00 60Preparation containing endosulfan (iso), used as pesticide (cas 115-29-7)
- 3808 59 00 70Preparation containing hexachlorobenzene, used as pesticide (cas 118-74-1)
- 3808 59 00 90Goods specified in subheading note 1 to this chapter: other, other
- 3808 61 00 00In packings of a net weight content not exceeding 300 g
- 3808 62 00 00In packings of a net weight content exceeding 300 g but not exceeding 7.5 kg
- 3808 69 00 00Goods specified in subheading note 2 to this chapter: other
- 3808 91 10 10Technical aerosols that contain hydrofluorocarbons (hfcs) with global warming potential (gwp) of 150 or more
- 3808 91 10 90Insecticides, rodenticides, fungicides, herbicides: other, insecticides, based on pyrethroids, other
- 3808 91 20 10Preparation containing mirex, used as insecticide (cas 2385-85-5)
- 3808 91 20 90Based on chlorinated hydrocarbons: other
- 3808 91 30 00Insecticides, rodenticides, fungicides, herbicides: other, insecticides, based on carbamates
- 3808 91 40 00Based on organophosphorus compounds
- 3808 91 90 15Preparation containing endrin (iso), used as insecticide (cas 72-20-8)
- 3808 91 90 25Preparation containing chlordecone (iso), used as insecticide (cas 143-50-0)
- 3808 91 90 30Preparation containing endospores or spores and protein crystals derived from either: - bacillus thuringiensis berliner subsp. aizawai and kurstaki or, - bacillus thuringiensis subsp. kurstaki or, - bacillus thuringiensis subsp. israelensis or, - bacillus thuringiensis subsp. aizawai or, - bacillus thuringiensis subsp. tenebrionis
- 3808 91 90 40Insecticides, rodenticides, fungicides, herbicides: other, insecticides, other, spinosad (iso)
- 3808 91 90 60Spinetoram (iso) (cas rn 935545-74-7), preparation of two spinosyn components (3'-ethoxy-5.6-dihydro spinosyn j) and (3'-ethoxy- spinosyn l)
- 3808 91 90 90Insecticides, rodenticides, fungicides, herbicides: other, insecticides, other, other
- 3808 92 10 00Preparations based on copper compounds
- 3808 92 20 00Insecticides, rodenticides, fungicides, herbicides: other, fungicides, inorganic, other
- 3808 92 30 00Insecticides, rodenticides, fungicides, herbicides: other, fungicides, other, based on dithiocarbamates
- 3808 92 40 00Insecticides, rodenticides, fungicides, herbicides: other, fungicides, other, based on benzimidazoles
- 3808 92 50 00Based on diazoles or triazoles
- 3808 92 60 00Based on diazines or morpholines
- 3808 92 90 00Insecticides, rodenticides, fungicides, herbicides: other, fungicides, other, other
- 3808 93 11 00Herbicides, anti-sprouting products and plant-growth: herbicides, based on phenoxy-phytohormones
- 3808 93 13 00Herbicides, anti-sprouting products and plant-growth: herbicides, based on triazines
- 3808 93 15 00Herbicides, anti-sprouting products and plant-growth: herbicides, based on amides
- 3808 93 17 00Herbicides, anti-sprouting products and plant-growth: herbicides, based on carbamates
- 3808 93 21 00Based on dinitroaniline derivatives
- 3808 93 23 00Based on derivatives of urea, of uracil or of sulphonylurea
- 3808 93 27 00Herbicides, anti-sprouting products and plant-growth: herbicides, other
- 3808 93 30 00Herbicides, anti-sprouting products and plant-growth: anti-sprouting products
- 3808 93 90 10Preparation, in the form of granules, containing by weight: - 38.8% or more but not more than 41.2% of gibberellin a3, or - 9.5% or more but not more than 10.5% of gibberellin a4 and a7
- 3808 93 90 70Preparation in the form of powder, containing by weight 90% or more of gibberellin a4 and gibberellin a7 combined (cas rn 8030-53-3)
- 3808 93 90 90Herbicides, anti-sprouting products and plant-growth: plant-growth regulators, other
- 3808 94 10 00Based on quaternary ammonium salts
- 3808 94 20 20Trichloroisocyanuric acid and preparations thereof, also referred to as ‘symclosene’ under the international non-propriatory name (inn)
- 3808 94 20 30Bromochloro-5.5-dimethylimidazolidine-2.4-dione (cas rn 32718-18-6) containing: - 1.3-dichloro-5.5-dimethylimidazolidine-2.4-dione (cas rn 118-52-5), - 1.3-dibromo-5.5-dimethylimidazolidine-2.4-dione (cas rn 77-48-5), - 1-bromo,3-chloro-5.5-dimethylimidazolidine-2.4-dione (cas rn 16079-88-2), and/or - 1-chloro,3-bromo-5.5-dimethylimidazolidine-2.4-dione (cas rn 126-06-7)
- 3808 94 20 40Aqueous solution containing by weight: - 10.0% or more but not more than 11.3% of 5-chloro-2-methyl-2h-isothiazol-3-one, - 3.0% or more but not more than 4.1% of 2-methyl-2h-isothiazol-3-one, - a combined concentration of isothiazolones (cas rn 55965-84-9) of 13.0% or more but not more than 15.4%, - 18% or more but not more than 22% of nitrates, calculated as sodium nitrate, and - 5% or more but not more than 8% of chlorides, calculated as sodium chloride
- 3808 94 20 90Based on halogenated compounds: other
- 3808 94 90 10Technical aerosols that contain hydrofluorocarbons (hfcs) with global warming potential (gwp) of 150 or more
- 3808 94 90 90Insecticides, rodenticides, fungicides, herbicides: other, disinfectants, other, other
- 3808 99 10 00Insecticides, rodenticides, fungicides, herbicides: other, other, rodenticides
- 3808 99 90 10Preparation containing dicofol (iso) (cas 115-32-2)
- 3808 99 90 30Milbemycin oxime (cas rn 129496-10-2), mixture of methyl analogue and ethyl analogue, with a purity by weight of 95% or more
- 3808 99 90 90Insecticides, rodenticides, fungicides, herbicides: other, other, other, other
3809 Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included
- 3809 10 10 00Containing by weight less than 55% of such substances
- 3809 10 30 00Containing by weight 55% or more but less than 70% of such substances
- 3809 10 50 00Containing by weight 70% or more but less than 83% of such substances
- 3809 10 90 00Containing by weight 83% or more of such substances
- 3809 91 00 30Aqueous antimony pentoxide mixture containing by weight: -46% or more but not more than 55% of antimony pentoxide (cas rn 1314-60-9), and -1% or more but not more than 10% of triethanolamine (cas rn 102-71-6), or -1% or more but not more than 10% of triethanolamine phosphate (cas rn 10017-56-8)
- 3809 91 00 90Of a kind used in the textile or like industries: other
- 3809 92 00 00Of a kind used in the paper or like industries
- 3809 93 00 00Of a kind used in the leather or like industries
3810 Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods
- 3810 10 00 10Tin or zinc based, halide free, surface mount technology processing solder paste: -with metal contents of 87.5% or more, but not more than 90.1% by weight, -with an alloy solidus temperature of 210°c or more, -with a viscosity of 178 pa·s or more, but not more than 235 pa·s, -with a particle size of 40 µm or less, -with a silver content either of 3.15% or more, but not more than 3.5% by weight for tin based paste or of 0.25% or more, but not more than 0.28% by weight for zinc based paste, -with or without bismuth content of 2.55% or more, but not more than 2.71% by weight, -with or without copper content of 0.6% or more, but not more than 0.7% by weight
- 3810 10 00 90Pickling preparations for metal surfaces: other
- 3810 90 10 00Preparations of a kind used as cores or coatings for welding electrodes and rods
- 3810 90 90 00Pickling preparations for metal surfaces: other, other
3811 Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils
- 3811 11 10 00Based on lead compounds: based on tetraethyl-lead
- 3811 11 90 00Based on lead compounds: other
- 3811 19 00 10Solution of more than 61% but not more than 63% by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than: - 4.9% of 1.2,4-trimethyl-benzene, - 4.9% of naphthalene, and - 0.5% of 1.3,5-trimethyl-benzene
- 3811 19 00 90Anti-knock preparations, oxidation inhibitors: anti-knock preparations, other, other
- 3811 21 00 11Dispersing agent and oxidation inhibitor containing: - o-amino polyisobutylenephenol (cas rn 78330-13-9), - more than 30% by weight but not more than 50% by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils
- 3811 21 00 12Dispersing agent containing: - esters of polyisobutenyl succinic acid and pentaerythritol (cas rn 103650-95-9), - 35% or more but not more than 55% by weight of mineral oils and - with a chlorine content of not more than 0.05% by weight, used in the manufacture of blends of additives for lubricating oils
- 3811 21 00 13Additives containing: - borated magnesium (c16-c24) alkylbenzene sulphonates and - mineral oils, having a total base number (tbn) of more than 250, but not more than 350, for use in the manufacture of lubricating oils
- 3811 21 00 14Dispersing agent: - containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (cas rn 147880-09-9), - containing 35% or more but not more than 55% by weight of mineral oils, - with a chlorine content by weight of not more than 0.05%, - having a total base number of less than 15, used in the manufacture of blends of additives for lubricating oils
- 3811 21 00 16Detergent containing: - calcium salt of beta-aminocarbonyl alkylphenol (reaction product mannich base of alkylphenol) - 40% or more but not more than 60% by weight of mineral oils and - having a total base number more than 120 used in the manufacture of blends of additives for lubricating oils
- 3811 21 00 19Additives containing: - a polyisobutylene succinimide based mixture, and - more than 30% but not more than 50% by weight of mineral oils, having a total base number of more than 40, for use in the manufacture of lubricating oils
- 3811 21 00 20Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil
- 3811 21 00 21Additive containing by weight: -90% or more but not more than 97% of reaction products of butyl-cyclohex-3-enecarboxylate and sulphur (cas rn 160305-95-3), -3% or more but not more than 10% of mineral oil, for use in the manufacture of blends of additives for lubricating oils
- 3811 21 00 22Additive consisting essentially of: -polyisobutenyl succinic anhydride (cas rn 192662-34-3) reaction product with n,n-diethylaminoethanol (cas rn 100-37-8), -25% or more by weight, but not more than 40% by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils
- 3811 21 00 24Additive consisting essentially of: -polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (cas rn 134758-95-5), with a chlorine content by weight of 0.05% or more but not more than 0.25% and a total base number (tbn) of more than 20, -45% and more by weight and no more than 55% by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils
- 3811 21 00 25Additives containing: - a (c8-18) alkyl polymethacrylate copolymer with n-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (mw) of more than 10.000 but not more than 20.000, and - more than 15% , but not more than 30% by weight of mineral oils, for use in the manufacture of lubricating oils
- 3811 21 00 26Additive consisting essentially of: -phosphorodithioic acid, mixed o,o-bis (1.3-dimethylbutyl and isopropyl) esters, zinc salts (cas rn 84605-29-8), -7% or more by weight but not more than 12% by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils
- 3811 21 00 27Additives containing: -10% or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and -mineral oils, for use in the manufacture of lubricating oils
- 3811 21 00 28Additive consisting essentially of: -zinc bis(o,o-bis(2-ethylhexyl)) bis (dithiophosphate) (cas rn 4259-15-8); -triphenyl phosphite (cas rn 101-02-0) more than 0.5% by weight but not more than 6% by weight, -o,o,o-triphenyl phosphorothioate (cas rn 597-82-0) more than 0.5% by weight but not more than 6% by weight, and not more than 7.5% by weight of the combination of triphenylphosphorus compounds -10% or more by weight but not more than 20% by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils
- 3811 21 00 29Additive containing by weight: -25% or more but not more than 40% of calcium c16-24 alkylbenzenesulphonates (cas rn 70024-69-0), -30% or more but not more than 65% of mineral oils, for use in the manufacture of blends of additives for lubricating oils
- 3811 21 00 30Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process
- 3811 21 00 32Additive consisting essentially of: -zinc o,o,o',o'-tetrakis (1.3-dimethylbutyl) bis(phosphorodithioate) (cas rn 2215-35-2), -4% or more by weight but not more than 12% by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils
- 3811 21 00 33Additives containing: - calcium salts of heptylphenol reaction products with formaldehyde (cas rn 84605-23-2), and - mineral oils, having a total base number (tbn) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils
- 3811 21 00 34Detergent containing: -benzenesulfonic acid, methyl-, mono-c20-24-branched alkyl derivs., calcium salts (cas rn 722503-68-6), -more than 30% but not more than 60% by weight of mineral oils, and, -having a total base number of more than 310 but not more than 340, used in the manufacture of blends of additives for lubricating oils
- 3811 21 00 37Additives containing: - a styrene-maleic anhydride copolymer esterified with c4-c20 alcohols, modified by aminopropylmorpholine, and - more than 50% but not more than 75% by weight of mineral oils, for use in the manufacture of lubricating oils
- 3811 21 00 38Solution of mineral oils (cas rn 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight: -25% or more but not more than 55% of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (cas rn 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3) -whether or not, not more than 25% of the barium, calcium, magnesium or zinc salt of a mixture of c3-c24 carboxylic acids (cas rn 68990-37-4)
- 3811 21 00 48Additives containing: - overbased magnesium (c20-c24) alkylbenzenesulphonates (cas rn 231297-75-9) and - by weight more than 25% but not more than 50% of mineral oils, - having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils
- 3811 21 00 53Additives containing: - overbased calcium petroleum sulphonates (cas 68783-96-0) with a sulphonate content by weight of 15% or more, but not more than 30% and - by weight more than 40% but not more than 60% of mineral oil, having a total base number of 280 or more but not more than 420,for use in the manufacture of lubricating oils
- 3811 21 00 55Additives containing: - low base number calcium polypropylbenzenesulphonate (cas rn 75975-85-8) and - by weight more than 40% but not more than 60% mineral oils, having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils
- 3811 21 00 60Additives for lubricating oils, containing mineral oils, - based on calcium polypropylenyl substituted benzenesulphonate (cas rn 75975-85-8) with a content by weight of 25% or more but not more than 35%, - with a total base number (tbn) of 280 or more but not more than 320, used as a concentrated additive for the manufacture of engine oils through a blending process
- 3811 21 00 63Additives containing: - an overbased mixture of calcium petroleum sulphonates (cas rn 61789-86-4) and synthetic calcium alkylbenzenesulphonates (cas rn 68584-23-6 and cas rn 70024-69-0) with a total sulphonate content by weight of 15% or more, but not more than 25% and - by weight more than 40% but not more than 60% of mineral oils, having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils
- 3811 21 00 65Additives containing: - a polyisobutylene succinimide based mixture (cas rn 160610-76-4), and - more than 35% but not more than 50% by weight of mineral oils, having a sulphur content of more than 0.7% but not more than 1.3% by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils
- 3811 21 00 70Additives for lubricating oils, - containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (cas rn 84605-20-9), - containing mineral oils, - with a chlorine content by weight of 0.05% or more but not more than 0.25%, - with a total base number (tbn) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process
- 3811 21 00 73Additives containing: - borated succinimide compounds (cas rn 134758-95-5), - mineral oils, and - having a total base number (tbn) greater than 40, for use in the manufacture of additive mixtures for lubricating oils
- 3811 21 00 75Additives containing: - calcium (c10-c14) dialkylbenzenesulfonates, - more than 40%, but not more than 60% by weight of mineral oils, with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils
- 3811 21 00 77Antifoam additives consisting of: - a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and - more than 50% but not more than 80% by weight of mineral oils for use in the manufacture of additive blends for lubricating oils
- 3811 21 00 80Additives containing: - polyisobutylene aromatic polyamine succinimide, - more than 40% but not more than 60% by weight of mineral oils, with a nitrogen content of more than 0.6% but not more than 0.9% by weight, for use in the manufacture of additive blends for lubricating oils
- 3811 21 00 83Additives containing: - polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (cas rn 84605-20-9), - containing more than 31.9% but not more than 43.3% by weight of mineral oils, - not more than 0.05% by weight chlorine, and - having a total base number (tbn) greater than 20, for use in the manufacture of additives blends for lubricating oils
- 3811 21 00 85Additives, - containing more than 20% but not more than 45% by weight of mineral oils, - based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated, for use in the manufacture of blends of additives
- 3811 21 00 90Containing petroleum oils or oils obtained from bituminous: other
- 3811 29 00 20Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with c12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils
- 3811 29 00 23Additive for lubricating oils consisting of molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurised (cas rn 68412-26-0)
- 3811 29 00 30Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (cas rn 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process
- 3811 29 00 33Additives for lubricating oils, consisting of a mixture of n,n-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (cas rn 866259-61-2), used in the manufacture of blends of additives for lubricating oils
- 3811 29 00 38Additives consisting of the c12-c14-tert-alkylamine salts of the esters of c14-c18 saturated and c18 unsaturated alcohols with phosphorus pentoxide (cas rn 1471315-74-8), for use in the manufacture of blends of additives for lubricating oils or greases
- 3811 29 00 40Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (cas rn 68511-50-2), with a chlorine content by weight of 0.01% or more but not more than 0.5%, used as a concentrated additive for the manufacture of lubricating oils
- 3811 29 00 43Reaction products of c14-c18 (branched and linear) and c18 (unsaturated) fatty acids with tetraethylenepentamine (linear, branched, cyclic) (cas rn 68784-17-8), for use in the manufacture of lubricating oils
- 3811 29 00 45Additives consisting of a mixture of (c7-c9) dialkyl adipates, in which diisooctyl adipate (cas rn 1330-86-5) is more than 85% by weight of the mixture, for use in the manufacture of lubricating oils
- 3811 29 00 48Mixed c12-c20-alkyl and c14-c18-unsaturated alkyl derivates of phosphonic acid (cas rn 93925-25-8), containing by weight more than 80% of oleyl, palmityl and stearyl groups, for use in the manufacture of lubricating oils
- 3811 29 00 57Additives consisting of reaction products of diphenylamine and branched nonenes with: - more than 20% but not more than 50% by weight 4-monononyldiphenylamine, and - more than 50% but not more than 80% by weight 4.4'-dinonyldiphenylamine, - a total percentage of 2.4-dinonyldiphenylamine and 2.4'-dinonyldiphenylamine of not more than 15% by weight, used for the manufacture of lubricating oils
- 3811 29 00 75Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (cas rn 67124-09-8), used in the manufacture of blends of additives for lubricating oils
- 3811 29 00 79Additives, consisting of the reaction products of 1.3,4-thiadiazolidine-2.5-dithione with hydrogen peroxide and tert-nonanethiol, containing by weight: - 70% or more of 2.5-bis(tert-nonyldithio)-[1.3,4]-thiadiazole (cas rn 89347-09-1), and - 10% or more of 5-(tert-nonyldithio)-1.3,4-thiadiazole-2(3h)-thione (cas rn 97503-12-3), for use in the manufacture of blends of additives for lubricating oils
- 3811 29 00 85Additives consisting of a mixture of 3-((c9-11)-isoalkyloxy)tetrahydrothiophene 1.1-dioxide, c10-rich (cas rn 398141-87-2), for use in the manufacture of lubricating oils
- 3811 29 00 90Additives for lubricating oils: other, other
- 3811 90 00 40Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10% or more but not more than 29.9% of 2-ethylhexanol
- 3811 90 00 50Corrosion inhibitor containing: - polyisobutenyl succinic acid and - more than 5% and not more than 20% by weight of mineral oils for use in the manufacture of blends of additives for fuels
- 3811 90 00 60Solution of mineral oils (cas rn 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight: -25% or more but not more than 55% of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (cas rn 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3) -whether or not, not more than 25% of the barium, calcium, magnesium or zinc salt of a mixture of c3-c24 carboxylic acids (cas rn 68990-37-4)
- 3811 90 00 90Anti-knock preparations, oxidation inhibitors: other, other
3812 Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilisers for rubber or plastics
- 3812 10 00 10Rubber accelerator based on diphenyl guanidine granules (cas rn 102-06-7)
- 3812 10 00 30Vulcanisation accelerator, consisting by weight of: -98% or more of n-tert-butyl bis(2-benzothiazolesulfen) amide (cas rn 3741-80-8) -not more than 2% of white mineral oil (cas rn 8042-47-5)
- 3812 10 00 90Prepared rubber accelerators: prepared rubber accelerators, other
- 3812 20 10 00Reaction mixture containing benzyl 3-isobutyryloxy-1-isopropyl-2.2-dimethylpropyl phthalate and benzyl 3-isobutyryloxy-2.2,4-trimethylpentyl phthalate
- 3812 20 90 10Plasticizer, containing: - bis(2-ethylhexyl)-1.4-benzene dicarboxylate (cas rn 6422-86-2) - more than 10% but not more than 60% by weight of dibutylterephthalate (cas rn 1962-75-0)
- 3812 20 90 201.2-benzenedicarboxylic acid, di-c6-8-branched alkyl esters, c7-rich (cas rn 71888-89-6) (cas rn 71888-89-6)
- 3812 20 90 301.2-benzenedicarboxylic acid, di-c7-11-branched and linear alkyl esters (cas rn 68515-42-4)
- 3812 20 90 40N-pentyl-isopentylphthalate (cas rn 776297-69-9)
- 3812 20 90 90Compound plasticisers for rubber or plastics: other, other
- 3812 31 00 00Mixtures of oligomers of 2.2,4-trimethyl-1.2-dihydroquinoline (tmq)
- 3812 39 10 00Anti-oxidising preparations and other compound stabilisers: other, anti-oxidising preparations
- 3812 39 90 23Uv stabilizer, containing by weight: -more than 97% but not more than 99.8% of bis(2.4-dicumylphenyl)pentaerythritol diphosphite (cas rn 154862-43-8) and -more than 0.2% but not more than 2% of triisopropanolamine (cas rn 122-20-3)
- 3812 39 90 25Uv photo stabiliser containing: - α-[3-[3-(2h-benzotriazol-2-yl)-5-(1.1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1.2-ethanediyl) (cas rn 104810-48-2); - α-[3-[3-(2h-benzotriazol-2-yl)-5-(1.1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2h-benzotriazol-2-yl)-5-(1.1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1.2-ethanediyl) (cas rn 104810-47-1); - polyethylene glycol of a weight average molecular weight (mw) of 300 (cas rn 25322-68-3) - bis (1.2,2.6,6-pentamethyl-4-piperidyl)sebacate (cas rn 41556-26-7), and - methyl-1.2,2.6,6-pentamethyl-4- piperidyl sebacate (cas rn 82919-37-7)
- 3812 39 90 28Uv stabilizer based on a mixture of -reaction mass of poly(oxy-1.2-ethanediyl), .alpha.-[3-[3-(2h-benzotriazol-2-yl)-5-(1.1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-.omega.-hydroxy- and poly(oxy-1.2-ethanediyl), .alpha.-[3-[3-(2h-benzotriazol-2-yl)-5-(1.1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-.omega.-[3-[3-(2h-benzotriazol-2-yl)-5-(1.1-dimethylethyl)-4-hydroxyphenyl]-1- oxopropoxy] (ec number 400-830-7) with a purity by weight of 60% or more, but not more than 80%, and -reaction mass of bis(1.2,2.6,6-pentamethyl-4-piperidyl) sebacate and methyl 1.2,2.6,6-pentamethyl-4-piperidyl sebacate (cas rn 1065336-91-5) with a purity by weight of 25% or more, but not more than 40%
- 3812 39 90 33Uv stabilizer based on: -a mixture of branched and linear c7-c9 alkyl 3-[3-(2h-benzotriazol-2-yl)-5-(1.1-dimethylethyl)-4-hydroxyphenyl]propionates (cas rn 127519-17-9) with a content by weight of 40% or more, but not more than 60%, and -a mixture of: bis(2.2,6.6-tetramethyl-1-octyloxypiperidin-4-yl)-1.10-decanedioate and 1.8-bis[(2.2,6.6-tetramethyl-4-((2.2,6.6-tetramethyl-1-octyloxypiperidin-4-yl)-decan-1.10-dioyl)piperidin-1-yl)oxy]octane (cas rn 129757-67-1) with a content by weight of 40% or more, but not more than 60%
- 3812 39 90 35Mixture containing by weight: - 25% or more but not more than 55% of a mixture of c15-18 tetramethylpiperidinyl esters (cas rn 86403-32-9) - not more than 20% of other organic compounds - on a carrier of polypropylene (cas rn 9003-07-0) or amorphous silica (cas rn 7631-86-9 or 112926-00-8)
- 3812 39 90 38Uv stabiliser containing by weight: -75% or more but not more than 95% of the reaction product of 2-(4.6-bis(2.4-dimethylphenyl)-1.3,5-triazin-2-yl)-5-hydroxyphenol with ((c10-16, rich in c12-13 alkyloxy) methyl) oxyrane -5% or more but not more than 25% of 1-methoxy-2-propanol (cas rn 107-98-2)
- 3812 39 90 40Mixture of: - 80% (± 10%) by weight of 2-ethylhexyl 10-ethyl-4.4-dimethyl-7-oxo-8-oxa-3.5-dithia-4-stannatetradecanoate (cas rn 57583-35-4), and - 20% (± 10%) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3.5-dithia-4-stannatetradecanoate (cas rn 57583-34-3)
- 3812 39 90 43Reaction mass containing by weight: -more than 45% but not more than 49% of octyl 3-[3-tert-butyl-4-hydroxy-5-(5-chloro-2h-benzotriazol-2-yl)phenyl]propionate (cas rn 83044-89-7), and -more than 49% but not more than 53% of 2-ethylhexyl 3-[3-tert-butyl-4-hydroxy-5-(5-chloro-2h-benzotriazol-2-yl) phenyl]propionate (cas rn 83044-90-0)
- 3812 39 90 452-aminoethanol reaction products with cyclohexane and peroxidised n-butyl-2.2,6.6-tetramethyl-4-piperidinamine-2.4,6-trichloro-1.3,5-triazine reaction products (cas rn 191743-75-6) with a purity by weight of 99% or more
- 3812 39 90 48Uv stabilizer (cas rn 129757-67-1), reaction mass containing by weight 97% or more of: -bis[2.2,6.6-tetramethyl-1-(octyloxy)piperidin-4-yl] decanedioate, and -1.1'-bis[2.2,6.6-tetramethyl-1-(octyloxy)piperidin-4-yl] 10.10'-{octane-1.8-diylbis[oxy(2.2,6.6- tetramethylpiperidine-1.4-diyl)]} didecanedioate
- 3812 39 90 50Reaction mass of 2-ethylhexyl 10-ethyl-4.4-dioctyl-7-oxo- 8-oxa-3.5-dithia-4-stannatetradecanoate and 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-octyl- 7-oxo-8-oxa-3.5-dithia-4-stannatetradecanoate (reaction mass of dote and mote)
- 3812 39 90 53Light stabilizer, containing by weight more than 90% of reaction products of stearate methyl ester with 1-(2-hydroxy-2-methylpropoxy)-2.2,6.6-tetramethyl-4-piperidinol (cas rn 300711-92-6)
- 3812 39 90 55Uv stabilizer, containing: - 2-(4.6-bis(2.4-dimethylphenyl)-1.3,5-triazin-2-yl)-5-(octyloxy)-phenol (cas rn 2725-22-6) and - either n,n'-bis(1.2,2.6,6-pentamethyl-4-piperidinyl)-1.6-hexanediamine, polymer with 2.4- dichloro-6-(4-morpholinyl)-1.3,5-triazine (cas rn 193098-40-7) or - n,n'-bis(2.2,6.6-tetramethyl-4-piperidinyl)-1.6-hexanediamine, polymer with 2.4- dichloro-6-(4-morpholinyl)-1.3,5-triazine (cas rn 82451-48-7)
- 3812 39 90 65Stabiliser for plastic material containing: - 2-ethylhexyl 10-ethyl-4.4-dimethyl-7-oxo-8-oxa-3.5-dithia-4-stannatetradecanoate (cas rn 57583-35-4), - 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3.5-dithia-4-stannatetradecanoate (cas rn 57583-34-3), and - 2-ethylhexyl mercaptoacetate (cas rn 7659-86-1)
- 3812 39 90 75Uv stabilizer containing a mixture of: - branched and linear c7 to c9 alkyl esters of [3-(2h-benzotriazol-2-yl)-5-(1.1-dimethylethyl)-4-hydroxy]-1-phenylpropanoic acid (cas rn 127519-17-9) with a content by weight of 85% or more, and - 2-methoxy-1-methylethyl acetate (cas rn 108-65-6) with a content by weight of not more than 8%.
- 3812 39 90 80Uv-stabilizer, consisting of: - a hindered amine: n,n'-bis(1.2,2.6,6-pentamethyl-4-piperidinyl)-1.6-hexanediamine, polymer with 2.4- dichloro-6-(4-morpholinyl)-1.3,5-triazine (cas rn 193098-40-7) and - either an o-hydroxyphenyl triazine uv light absorber or - a chemically modified phenolic compound
- 3812 39 90 90Anti-oxidising preparations and other compound stabilisers: other, other, other
3813 Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades
3814 Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers
- 3814 00 10 10Ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union), denatured or undenatured, excluding products with a water content of more than 0.3% (m/m) measured according to the standard en 15376, but including ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union) contained in blends with gasoline with an ethyl alcohol content of more than 10% (v/v)
- 3814 00 10 90Based on butyl acetate: other
- 3814 00 90 40Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether
- 3814 00 90 70Ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union), denatured or undenatured, excluding products with a water content of more than 0.3% (m/m) measured according to the standard en 15376, but including ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union) contained in blends with gasoline with an ethyl alcohol content of more than 10% (v/v)
- 3814 00 90 99Organic composite solvents and thinners, not elsewhere: other, other
3815 Reaction initiators, reaction accelerators and catalytic preparations, not elsewhere specified or included
- 3815 11 00 00With nickel or nickel compounds as the active substance
- 3815 12 00 40Catalyst used to obtain paraxylene and orthoxylene by isomerisation of methaxylene containing by weight: -60% or more but not more than 95% of aluminum oxide (cas rn 1344-28-1), -5% or more but not more than 15% of aluminosilicate (cas rn 1327-36-2), -not more than 2% of platinum (cas rn 7440-06-4), -not more than 2% aluminum chloride hydroxide (cas rn 12042-91-0), -not more than 0.2% of hydrogen sulfide (cas rn 7783-06-4)
- 3815 12 00 50Catalyst in the form of granules, wheels or ring-shaped structures -of a diameter of 3 mm or more, but not exceeding 10 mm, -containing 8% or more but not more than 40% by weight of silver -on a carrier based on aluminium oxide, -with one or more promoters
- 3815 12 00 90With precious metal or precious-metal compounds: other
- 3815 19 10 00Catalyst in the form of grains of which 90% or more by weight have a particle-size not exceeding 10 micrometres, consisting of a mixture of oxides on a magnesium-silicate support, containing by weight: - 20% or more but not more than 35% of copper and - 2% or more but not more than 3% of bismuth, and of an apparent specific gravity of 0.2 or more but not exceeding 1.0
- 3815 19 90 10Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm³/g or more (as determined by the nitrogen absorption method)
- 3815 19 90 30Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene
- 3815 19 90 33Catalyst, in powder form, consisting of a mixture of metal oxides fixed to a silicon dioxide support, with a total content by weight of molybdenum, bismuth and iron of 20% or more but not more than 50%, for use in the manufacture of acrylonitrile
- 3815 19 90 55Components for a catalyst system, imported as single components or as set, made up of at least one of the following preparations: -ceramic material (cas rn 66402-68-4), -molybdenum oxide and nickel oxide supported on aluminium oxide, -molybdenum oxide, nickel oxide and aluminium phosphate supported on aluminium oxide, -molybdenum oxide, nickel oxide, aluminium phosphate, silica, and molybdenum supported on aluminium oxide, for use against organic and inorganic impurities in kerosene production
- 3815 19 90 70Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide
- 3815 19 90 75Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide
- 3815 19 90 80Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil
- 3815 19 90 82Catalyst consisting of organo-metallic compounds of boron, titanium and aluminium, fixed on a support of silicon dioxide, in the form of powder
- 3815 19 90 85Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder
- 3815 19 90 86Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins
- 3815 19 90 90Reaction initiators, reaction accelerators and catalytic: supported catalysts, other, other, other
- 3815 90 10 00Catalyst consisting of ethyltriphenylphosphonium acetate in the form of a solution in methanol
- 3815 90 90 16Initiator based on dimethylaminopropyl urea
- 3815 90 90 30Catalyst, consisting of a suspension in mineral oil of: - tetrahydrofuran complexes of magnesium chloride and titanium(iii) chloride; and - silicon dioxide - containing 6.6% (± 0.6%) by weight of magnesium, and - containing 2.3% (± 0.2%) by weight of titanium
- 3815 90 90 38Photoinitiator, containing by weight: -80% or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (cas rn 886463-10-1), -not more than 17% of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate
- 3815 90 90 43Catalyst in powder form consisting by weight of -92.50% (± 2) % titanium dioxide (cas rn 13463-67-7) -5% (± 1) % silicon dioxide (cas rn 112926-00-8) and -2.5% (± 1.5) % sulphur trioxide (cas rn 7446-11-9)
- 3815 90 90 48Photoinitiator containing by weight: -88% or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1.2-ethanediyl) (cas rn 1246194-73-9), -not more than 12% of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1.2-ethanediyl) (cas rn 1648797-60-7)
- 3815 90 90 50Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9% or more but not more than 30% of titanium
- 3815 90 90 55Catalytic additives for fluid catalytic cracking (fcc), not containing y type zeolite (cas rn 308079-79-0), and not being a fcc (fluid catalytic cracking) base catalyst, in the form of powder, consisting of a mixture of one or more of the following active substances: -calcium carbonate (cas rn 471-34-1), -copper oxide (cas rn 1217-38-0), -iron oxide (cas rn 1309-37-1), -aluminium magnesium vanadium oxide (cas rn 70621-8-0), -vanadium pentoxide (cas rn 1314-62-1), -aluminium phosphate (cas rn 7784-30-7), -cerium oxide (cas rn 1306-38-3), -zsm-5 type zeolite (cas rn 308081-08-5), and one or more of the following inert substances: -magnesium oxide (cas rn 1309-48-8), -aluminium oxide (cas rn 1344-28-1), -kaolin (cas rn 1332-58-7)
- 3815 90 90 581.1′-bis(4-triethylsilylphenyl)methylene(cyclopentadienyl)(2.7-di-tert-butyl-9-fluorenyl)dimethylhafnium (cas rn 264926-41-2) in the form of a hexane (cas rn 110-54-3) solution, containing by weight 2.0% or more but not more than 2.5% of 1.1′-bis(4-triethylsilylphenyl)methylene(cyclopentadienyl)(2.7-di-tert-butyl-9-fluorenyl)dimethylhafnium
- 3815 90 90 60Dinonylnaphthalenedisulfonic acid (cas rn 60223-95-2) with a content by weight of 50% or more but not more than 65%, in the form of a solution in isobutanol (cas rn 78-83-1)
- 3815 90 90 76Catalyst consisting of titanium dioxide and tungsten trioxide
- 3815 90 90 81Catalyst, containing by weight 69% or more but not more than 79% of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate
- 3815 90 90 85Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerisation of olefins
- 3815 90 90 88Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis: - 4% or more but not more than 10% of titanium and - 10% or more but not more than 20% magnesium
- 3815 90 90 89Rhodococcus rhodocrous j1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile
- 3815 90 90 90Reaction initiators, reaction accelerators and catalytic: other, other, other
3816 Refractory cements, mortars, concretes and similar compositions, including dolomite ramming mix, other than products of heading 3801
3817 Mixed alkylbenzenes and mixed alkylnaphthalenes, other than those of heading 2707 or 2902
- 3817 00 50 10Mixture of alkylbenzenes (c14-26) containing by weight: - 35% or more but not more than 60% of eicosylbenzene, - 25% or more but not more than 50% of docosylbenzene, - 5% or more but not more than 25% of tetracosylbenzene
- 3817 00 50 90Mixed alkylbenzenes and mixed alkylnaphthalenes, other than: linear alkylbenzenes, other
- 3817 00 80 10Mixture of alkylnaphthalenes, containing by weight: - 88% or more but not more than 98% of hexadecylnaphthalene - 2% or more but not more than 12% of dihexadecylnaphthalene
- 3817 00 80 20Mixture of branched alkyl benzenes mainly containing dodecyl benzenes
- 3817 00 80 30Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms
- 3817 00 80 90Mixed alkylbenzenes and mixed alkylnaphthalenes, other than: other, other
3818 Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics
- 3818 00 11 00Wafers of a thickness not exceeding 200 micrometres, rectangular, whether or not with cut or rounded corners (so-called photovoltaic wafers)
- 3818 00 19 00Chemical elements doped for use in electronics, in the form: doped silicon, other
- 3818 00 90 00Chemical elements doped for use in electronics, in the form: other
3819 Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals
3820 Anti-freezing preparations and prepared de-icing fluids
- 3820 00 00 10Ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union), denatured or undenatured, excluding products with a water content of more than 0.3% (m/m) measured according to the standard en 15376, but including ethyl alcohol produced from agricultural products (as listed in annex i to the treaty on the functioning of the european union) contained in blends with gasoline with an ethyl alcohol content of more than 10% (v/v)
- 3820 00 00 90Anti-freezing preparations and prepared de-icing fluids: other
3821 Prepared culture media for the development or maintenance of micro-organisms (including viruses and the like) or of plant, human or animal cells
3822 Diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, whether or not put up in the form of kits, other than those of heading 3006; certified reference materials
- 3822 11 00 00Diagnostic or laboratory reagents on a backing, prepared: for malaria
- 3822 12 00 00For zika and other diseases transmitted by mosquitoes of the genus aedes
- 3822 13 00 00Diagnostic or laboratory reagents on a backing, prepared: for blood-grouping
- 3822 19 00 10For sars-cov virus species
- 3822 19 00 90Diagnostic or laboratory reagents on a backing, prepared: other, other
- 3822 90 00 00Diagnostic or laboratory reagents on a backing, prepared: other
3823 Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols
- 3823 11 00 20Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengths
- 3823 11 00 50Of a kind used for animal feed: other
- 3823 11 00 70Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengths
- 3823 11 00 80Industrial monocarboxylic fatty acids: stearic acid, other, other
- 3823 12 00 20Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengths
- 3823 12 00 50Of a kind used for animal feed: other
- 3823 12 00 70Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengths
- 3823 12 00 80Industrial monocarboxylic fatty acids: oleic acid, other, other
- 3823 13 00 10Of a kind used for animal feed
- 3823 13 00 90Tall oil fatty acids: other
- 3823 19 10 30Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengths
- 3823 19 10 50Of a kind used for animal feed: other
- 3823 19 10 70Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain lengths
- 3823 19 10 80Industrial monocarboxylic fatty acids: other, distilled fatty acids, other, other
- 3823 19 30 20Industrial monocarboxylic fatty acids of heading 3823, stearic acid of heading 3823, stearic acid of heading 2915, palmitic acid of heading 2915
- 3823 19 30 30Animal feed preparations of subheading 2309
- 3823 19 30 80Of a kind used for animal feed
- 3823 19 30 89Industrial monocarboxylic fatty acids: other, fatty acid distillate, other, other
- 3823 19 90 20Industrial monocarboxylic fatty acids of heading 3823, stearic acid of heading 3823, stearic acid of heading 2915, palmitic acid of heading 2915
- 3823 19 90 30Animal feed preparations of subheading 2309
- 3823 19 90 70Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g and with a degree of split (dos) of at least 97%, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain length
- 3823 19 90 75Of a kind used for animal feed: other
- 3823 19 90 95Fatty acids with a carbon chain length of c6, c8, c10, c12, c14, c16 or c18 with an iodine value below 105g/100g and with a degree of split (dos) of at least 97%, including single fatty acids (also referred to as ‘pure cut’) and blends containing a combination of two or more carbon chain length
- 3823 19 90 98Industrial monocarboxylic fatty acids: other, other, other, other, other
- 3823 70 00 10Of a kind used for animal feed
- 3823 70 00 90Industrial monocarboxylic fatty acids: industrial fatty alcohols, other
3824 Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included
- 3824 10 00 10Based on synthetic resins
- 3824 10 00 90Prepared binders for foundry moulds or cores: other
- 3824 30 00 10In the form of irregular and non-free-flowing particles, simply mixed with metallic powder
- 3824 30 00 20Ready-to-press powder, in the form of spherical or granular shaped, homogeneous and free-flowing particles, simply mixed with metallic powder and/or other carbides, and an organic binder
- 3824 30 00 30Other, in the form of spherical or granular shaped, homogeneous and free-flowing particles, simply mixed with metallic powder and/or other carbides
- 3824 30 00 40Other, simply mixed with metallic powder and/or other carbides
- 3824 30 00 90Non-agglomerated metal carbides mixed together or with: other
- 3824 40 00 00Prepared additives for cements, mortars or concretes
- 3824 50 10 00Concrete ready to pour
- 3824 50 90 00Non-refractory mortars and concretes: other
- 3824 60 11 00Containing 2% or less by weight of d-mannitol, calculated on the d-glucitol content
- 3824 60 19 00Sorbitol other than that of subheading 2905 44: in aqueous solution, other
- 3824 60 91 00Containing 2% or less by weight of d-mannitol, calculated on the d-glucitol content
- 3824 60 99 00Sorbitol other than that of subheading 2905 44: other, other
- 3824 81 00 00Containing oxirane (ethylene oxide)
- 3824 82 00 10Preparation containing polychlorinated biphenyls (pcbs)
- 3824 82 00 20Preparation containing hexabromobiphenyl (cas 36355-01-8)
- 3824 82 00 90Containing polychlorinated biphenyls: other
- 3824 83 00 00Goods specified in subheading note 3 to this chapter: containing tris(2.3-dibromopropyl) phosphate
- 3824 84 00 10Preparation containing ddt (iso) (cas 50-29-3)
- 3824 84 00 15Preparation containing camphechlor (iso)
- 3824 84 00 20Preparation containing chlordane (iso) (cas 57-74-9)
- 3824 84 00 30Preparation containing dieldrin (iso) (cas 60-57-1)
- 3824 84 00 40Preparation containing endrin (iso) (cas 72-20-8)
- 3824 84 00 50Preparation containing endosulfan (iso) (115-29-7)
- 3824 84 00 60Preparation containing chlordecone (iso) (cas 143-50-0)
- 3824 84 00 70Containing aldrin: preparation containing mirex
- 3824 84 00 90Containing aldrin: other
- 3824 85 00 00Containing 1.2,3.4,5.6-hexachlorocyclohexane (hch (iso)), including lindane (iso, inn)
- 3824 86 00 00Containing pentachlorobenzene (iso) or hexachlorobenzene (iso)
- 3824 87 00 00Containing perfluorooctane sulphonic acid, its salts, perfluorooctane sulphonamides, or perfluorooctane sulphonyl fluoride
- 3824 88 00 00Containing tetra-, penta-, hexa-, hepta- or octabromodiphenyl ethers
- 3824 89 00 10Alkanes, c10-13, chloro (cas 85535-84-8)
- 3824 89 00 90Containing short-chain chlorinated paraffins: other
- 3824 91 00 00Mixtures and preparations consisting mainly of (5-ethyl-2-methyl-2-oxido-1.3,2-dioxaphosphinan-5-yl)methyl methyl methylphosphonate and bis[(5-ethyl-2-methyl-2-oxido-1.3,2-dioxaphosphinan-5-yl)methyl] methylphosphonate
- 3824 92 00 00Polyglycol esters of methylphosphonic acid
- 3824 99 10 00Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts
- 3824 99 15 00Prepared binders for foundry moulds or cores: other, other, ion-exchangers
- 3824 99 20 00Getters for vacuum tubes
- 3824 99 25 00Pyrolignites (for example, of calcium); crude calcium tartrate; crude calcium citrate
- 3824 99 30 00Naphthenic acids, their water-insoluble salts and their esters
- 3824 99 45 00Anti-scaling and similar compounds
- 3824 99 50 00Prepared binders for foundry moulds or cores: other, other, other, preparations for electroplating
- 3824 99 55 00Mixtures of mono-, di- and tri-, fatty acid esters of glycerol (emulsifiers for fats)
- 3824 99 61 00Intermediate products of the antibiotics manufacturing process obtained from the fermentation of streptomyces tenebrarius, whether or not dried, for use in the manufacture of human medicaments of heading 3004
- 3824 99 62 00Intermediate products from the manufacture of monensin salts
- 3824 99 64 00Products and preparations for pharmaceutical or surgical: other
- 3824 99 65 00Auxiliary products for foundries (other than those of subheading 3824 10 00)
- 3824 99 70 00Fireproofing, waterproofing and similar protective preparations used in the building industry
- 3824 99 75 00Lithium niobate wafer, undoped
- 3824 99 80 00Mixture of amines derived from dimerised fatty acids, of an average molecular weight of 520 or more but not exceeding 550
- 3824 99 85 003-(1-ethyl-1-methylpropyl)isoxazol-5-ylamine, in the form of a solution in toluene
- 3824 99 86 00Mixtures consisting mainly of dimethyl methylphosphonate, oxirane and diphosphorus pentaoxide
- 3824 99 92 01Naphthalene, chloro derivatives (cas 70776-03-3)
- 3824 99 92 02Preparation containing hexabromocyclododecane (cas 25637-99-4, 3194-55-6)
- 3824 99 92 07R514a (containing 74.7% of 1.1,1.4,4.4-hexafluoro-2-butene (hfc-1336mzz) and 25.3% of trans–1.2-dichloroethylene)
- 3824 99 92 08Mixtures containing halogenated derivatives of ethylene: other
- 3824 99 92 10Blends containing by weight more than 20% of paraffinic: consigned from Canada
- 3824 99 92 14Blends containing by weight more than 20% of paraffinic: other
- 3824 99 92 17Blends containing by weight 20% or less of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
- 3824 99 92 21Reaction products of 1.3,4-thiadiazolidine-2.5-dithione, formaldehyde and 4-heptylphenol, branched and linear (rp-hp) (with ≥ 0.1% w/w 4-heptylphenol, branched and linear)
- 3824 99 92 22Solution containing: -30% or more but not more than 40% by weight of lithium hexafluorophosphate (cas rn 21324-40-3), and -60% or more but not more than 70% by weight of ethyl methyl carbonate (cas rn 623-53-0), or dimethyl carbonate (cas rn 616-38-6)
- 3824 99 92 23Butylphosphato complexes of titanium(iv) (cas rn 109037-78-7), dissolved in ethanol and propan-2-ol
- 3824 99 92 24In the form of a liquid at 20 °c: 4-(1.1,3.3-tetramethylbutyl)phenol, ethoxylated
- 3824 99 92 25Mixture containing by weight: -55% or more but not more than 65% of (2s,3s,4s,5r,6r)-2-(((2r,3r,5s,6r)-4-(((2r,3s,4s,5r,6r)-3-acetoxy-4.5-bis(benzyloxy)-6-((benzyloxy)methyl)tetrahydro-2h-pyran-2-yl)oxy)-3.5-bis(benzyloxy)-6-(4-methoxy-4-oxobutoxy)tetrahydro-2h-pyran-2-yl)methoxy)-6-((((2s,3s,4s,5r,6r)-3-acetoxy-4.5-bis(benzyloxy)-6-((benzyloxy)methyl)tetrahydro-2h-pyran-2-yl)oxy)methyl)tetrahydro-2h-pyran-3.4,5-triyl tribenzoate (cas rn 1233475-58-5), -35% or more but not more than 45% of toluene (cas rn 108-88-3)
- 3824 99 92 27Methyl 5-(dimethylamino)-2-methyl-5-oxopentanoate (cas rn 1174627-68-9) with a purity by weight of 75% or more
- 3824 99 92 28Preparation containing by weight: -30% or more, but not more than 60% of 3a,4.4a,5.8,8a,9.9a-octahydro-4.9:5.8-dimethano-1h-benz[f]indene (cas rn 7158-25-0), -10% or more, but not more than 50% of 3a,4.7,7a-tetrahydro-4.7-methanoindene (cas rn 77-73-6), and -whether or not 10% or more, but not more than 40% of petroleum hydrocarbon resin (cas rn 68132-00-3)
- 3824 99 92 29Preparation containing by weight: - 85% or more but not more than 99% of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and - 1% or more but not more than 15% of polyoxyethylene (20) sorbitan trioleate
- 3824 99 92 30Mixture of c10-c14 tert-alkyl amines (ec number: 701-175-2)
- 3824 99 92 33Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent
- 3824 99 92 344-nonylphenol, branched and linear, ethoxylated
- 3824 99 92 37Mixture of acetates of 3-butene-1.2-diol with a content by weight of 65% or more of 3-butene-1.2-diol diacetate (cas rn 18085-02-4)
- 3824 99 92 38Reaction products of phosphoryl trichloride and 2-methyloxirane (cas rn 1244733-77-4)
- 3824 99 92 40Solution of 2-chloro-5-(chloromethyl)-pyridine (cas rn 70258-18-3) in organic diluent
- 3824 99 92 41Formaldehyde, oligomeric reaction products with aniline (cas rn 25214-70-4)
- 3824 99 92 44Mixture, containing by weight: -90% or more but not more than 95% of cresol ethoxylate (cas rn 37281-57-5), and -5% or more but not more than 10% of xylenol ethoxylate (cas rn 61723-82-8)
- 3824 99 92 48Preparation containing by weight: -80% or more, but not more than 90% of 3a,4.7,7a-tetrahydro-4.7-methanoindene (cas rn 77-73-6), and -not more than 10% of 3a,4.4a,5.8,8a,9.9a-octahydro-1h-4.9:5.8-dimethanocyclopenta[b]naphtalene (cas rn 7158-25-0), and -0.5% or more, but not more than 3% of 2.6-di-tert-butyl-p-cresol (cas rn 128-37-0)
- 3824 99 92 49Preparation based on 2.5,8.11-tetramethyl-6-dodecyn-5.8-diol ethoxylate (cas rn 169117-72-0)
- 3824 99 92 51Mixture containing by weight 40% or more but not more than 50% of 2-hydroxyethyl methacrylate and 40% or more but not more than 50% of glycerol ester of boric acid
- 3824 99 92 52Electrolyte containing: -5% or more but not more than 20% lithium hexafluorophosphate (cas rn 21324-40-3) or lithium tetrafluoroborate (cas rn 14283-07-9), -60% or more but not more than 90% of a mixture of ethylene carbonate (cas rn 96-49-1), dimethyl carbonate (cas rn 616-38-6) and/or ethyl methyl carbonate (cas rn 623-53-0), -0.5% or more but not more than 20% 1.3,2-dioxathiolane 2.2-dioxide (cas rn 1072-53-3) for use in the manufacture of motor vehicle batteries
- 3824 99 92 54Poly(tetramethylene glycol) bis[(9-oxo-9h-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (cas rn 813452-37-8)
- 3824 99 92 55Additives for paints and coatings, containing: - a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1.1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (cas rn 84605-27-6), and - 30% or more but not more than 35% by weight of isobutyl alcohol
- 3824 99 92 58Mixture containing by weight: -56% or more but not more than 85% of divinylbenzene isomers (cas rn 1321-74-0) -15% or more but not more than 44% of ethylvinylbenzene isomers (cas rn 28106-30-1)
- 3824 99 92 613',4',5'-trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80% or more but not more than 90% of 3',4',5'-trifluorobiphenyl-2-amine
- 3824 99 92 62Solution of 9-borabicyclo[3.3.1]nonane (cas rn 280-64-8) in tetrahydrofurane (cas rn 109-99-9), containing by weight 6% or more 9-borabicyclo[3.3.1]nonane
- 3824 99 92 63Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate
- 3824 99 92 66For use as fuel
- 3824 99 92 67Ethyl alcohol produced from agricultural products: for other uses
- 3824 99 92 68Preparation containing by weight: - 20% (±1%) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) tribenzene (cas rn 1404190-37-9), dissolved in: - 10% (± 5%) 2-sec-butylphenol (cas rn 89-72-5) - 64%(±7%) solvent naphtha (petroleum), heavy aromatic (cas rn 64742-94-5) and - 6% (± 1.0%) naphthalene (cas rn 91-20-3)
- 3824 99 92 69Preparation containing by weight: - 80% or more but not more than 92% of bisphenol-a bis(diphenyl phosphate) (cas rn 5945-33-5) - 7% or more but not more than 20% oligomers of bisphenol-a bis(diphenyl phosphate) and - not more than 1% triphenyl phosphate (cas rn 115-86-6)
- 3824 99 92 70Mixture of 80% (± 10%) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20% (± 10%) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine
- 3824 99 92 73Tri-c8-10-alkyl amines (cas rn 68814-95-9) with a purity by weight of 95% or more
- 3824 99 92 75Mixture, containing by weight: -75% or more of tetrabutyltin (cas rn 1461-25-2), -not more than 20% of tributyltin chloride (cas rn 1461-22-9), -not more than 4% of dibutyltin dichloride (cas rn 683-18-1), for use in the production of butyltin compounds used in glass manufacture and tributyltin chloride used as a catalyst in the pharmaceutical industry
- 3824 99 92 79Mixture, containing by weight: -tributyltin chloride (cas rn 1461-22-9) with a purity by weight of 80% or more, -not more than 5% tetrabutyltin (cas rn 1461-25-2), -not more than 6% dibutyltin dichloride (cas rn 683-18-1), -not more than 11% o-xylene (cas rn 95-47-6), for use in the production of tributyltin chloride used as a catalyst in the pharmaceutical industry
- 3824 99 92 81Reaction mass of 3- [(diphenoxyphosphoryl)oxy]phenyl triphenyl 1.3-phenylene bis(phosphate) and tetraphenyl 1.3-phenylene bis(phosphate)
- 3824 99 92 82T-butylchloride dimethylsilane (cas rn 18162-48-6) solution in toluene
- 3824 99 92 831-(cedr-8-en-9-yl)ethanone (cas rn 32388-55-9) with a purity by weight of 70% or more, but not more than 90%
- 3824 99 92 84Preparation consisting by weight of 83% or more of 3a,4.7,7a-tetrahydro-4.7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7% or more of tricyclopentadiene, and: - either an aluminium-alkyl compound, - or an organic complex of tungsten - or an organic complex of molybdenum
- 3824 99 92 86Tall oil n,n-dimethyl fatty amides (cas rn 68308-74-7) with a purity by weight of 99% or more
- 3824 99 92 882.4,7.9-tetramethyldec-5-yne-4.7-diol, hydroxyethylated (cas rn 9014-85-1)
- 3824 99 92 89Mixture of tertiary alkyldimethyl amines containing by weight: - 60% or more but not more than 80% of dodecyldimethylamine (cas rn 112-18-5), and - 20% or more but not more than 30% of dimethyl(tetradecyl)amine (cas rn 112-75-4)
- 3824 99 92 901.2-benzenedicarboxylic acid, di-c6-10-alkyl esters (cas rn 68515-51-5)
- 3824 99 92 911.2-benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters with ≥ 0.3% of dihexyl phthalate (cas rn 68648-93-1)
- 3824 99 92 92Solution consisting of: - 50 (± 2) % by weight sodium mentholate (cas rn 19321-38-1), and - 50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (cas rn 64742-89-8)
- 3824 99 92 94({[2-(trifluoromethyl)phenyl]carbonyl}amino)methyl acetate (cas rn 895525-72-1) with a content of at least 45% by weight dissolved in n,n-dimethylacetamide (cas rn 127-19-5)
- 3824 99 92 95Solution of methyl cis-1-{[(2.5-dimethylphenyl)acetyl]amino}-4-methoxycyclohexanecarboxylate (cas rn 203313-47-7) in n,n-dimethylacetamide (cas rn 127-19-5), containing by weight 25% or more but not more than 45% of the carboxylate
- 3824 99 92 96Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ech’) and an aliphatic or aromatic alcoholic component (such as bpa), having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups
- 3824 99 92 97Mixture containing bis[3-(triethoxysilyl)propyl]polysulfides (cas rn 211519-85-6) with a purity by weight of 84% or more
- 3824 99 92 98Monosodium glutamate in mixture or in solution, containing by dry weight 50% or more of monosodium glutamate
- 3824 99 92 99In the form of a liquid at 20 °c: other
- 3824 99 93 10Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ech’) and an aliphatic or aromatic alcoholic component (such as bpa), having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups
- 3824 99 93 20Preparation containing hexabromocyclododecane (cas 25637-99-4 or 134237-52-8)
- 3824 99 93 30Powder mixture containing by weight: - 85% or more of zinc diacrylate (cas rn 14643-87-9), - not more than 5% of 2.6-di-tert-butyl-alpha-dimethylamino-p-cresol (cas rn 88-27-7), and - not more than 10% of zinc stearate (cas rn 557-05-1)
- 3824 99 93 31Reaction mass of dihexadecyl hydrogen phosphate (cas rn 2197-63-9) and hexadecyl dihydrogen phosphate (cas rn 3539-43-3)
- 3824 99 93 33Preparation containing by weight -60% or more but not more than 70% of calcium rel-(1r,2s)-cyclohexane-1.2-dicarboxylate (cas rn 491589-22-1), -30% or more but not more than 40% of zinc stearate (cas rn 557-05-1), -1% or more but not more than 5% of ci pigment blue 29 (cas rn 57455-37-5) and -1% or more but not more than 5% of ci pigment violet 15 (cas rn 12769-96-9)
- 3824 99 93 35Paraffin with a level of chlorination of 70% or more (cas rn 63449-39-8)
- 3824 99 93 36Preparation containing by weight 60% or more but not more than 70% of calcium rel-(1r,2s)-cyclohexane-1.2-dicarboxylate (cas rn 491589-22-1) and 30% or more but not more than 40% of zinc stearate (cas rn 557-05-1)
- 3824 99 93 40Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent
- 3824 99 93 42Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2.4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea
- 3824 99 93 45Sodium hydrogen 3-aminonaphthalene-1.5-disulphonate (cas rn 4681-22-5) containing by weight: - not more than 20% of disodium sulphate, and - not more than 10% of sodium chloride
- 3824 99 93 48Nonhalogenated flame retardant containing by weight: -50% or more, but not more than 65% of piperazine pyrophosphate (cas rn 66034-17-1), -35% or more, but not more than 45% of a phosphoric acid derivative and -not more than 6% of zinc oxide (cas rn 1314-13-2)
- 3824 99 93 53Zinc dimethacrylate (cas rn 13189-00-9), containing not more than 2.5% by weight of 2.6-di-tert-butyl-alpha-dimethyl amino-p-cresol (cas rn 88-27-7), in the form of powder
- 3824 99 93 61Disodium 7.7'-(carbonyldiimino)bis(4-hydroxynaphthalene-2-sulphonate) (cas rn 20324-87-2) with a purity by weight of 80% or more
- 3824 99 93 63Mixture of phytosterols, not in the form of powder, containing by weight: - 75% or more of sterols, - not more than 25% of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters
- 3824 99 93 65Reaction mass of 1.1'-(isopropylidene)bis[3.5-dibromo-4-(2.3-dibromo-2-methylpropoxy)benzene] (cas rn 97416-84-7) and 1.3-dibromo-2-(2.3-dibromo-2-methylpropoxy)-5-{2-[3.5-dibromo-4-(2.3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene
- 3824 99 93 67Mixture of phytosterols, in the form of powder, containing by weight: - 75% or more of sterols, - not more than 25% of stanols for use in the manufacture of stanols/sterols or stanol/sterol esters
- 3824 99 93 741.3-propanediamine, n1,n1'-1.2-ethanediylbis-, reaction products with cyclohexane and peroxidised n-butyl-2.2,6.6-tetramethyl-4-piperidinamine-2.4,6-trichloro-1.3,5-triazine reaction products (cas rn 191680-81-6)
- 3824 99 93 88Mixture of phytosterols containing by weight: - 60% or more, but not more than 80% of sitosterols, - not more than 15% of campesterols, - not more than 5% of stigmasterols and - not more than 15% of betasitostanols
- 3824 99 93 89Monosodium glutamate in mixture or in solution, containing by dry weight 50% or more of monosodium glutamate
- 3824 99 93 90Chemical products or preparations, predominantly composed: other, other
- 3824 99 96 30Rare-earth concentrate containing by weight: - 20% or more but not more than 30% of cerium oxide (cas rn 1306-38-3), - 2% or more but not more than 10% of lanthanum oxide (cas rn 1312-81-8), - 10% or more but not more than 15% of yttrium oxide (cas rn 1314-36-9), and - not more than 65% of zirconium oxide (cas rn 1314-23-4) including natural occurring hafnium oxide
- 3824 99 96 35Calcined bauxite (refractory grade)
- 3824 99 96 37Structured silica alumina phosphate
- 3824 99 96 38Low outgassing thermally conductive silicone paste: -with thermal conductivity when cured of 3.45 w/(m⋅k) or more but not more than 3.55 w/(m⋅k), -with continuous use temperature minimum range from -60 ℃ to 200 ℃, -with heat capacity when cured of 0.75 j/g·k or more but not more than 0.85 j/g·k, -with volume resistivity when cured of 1010 ω·m or more, -packaged in containers of 30 kg or more
- 3824 99 96 40Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent
- 3824 99 96 432-(ethylthio)ethanethiol functionalised silicagel with a purity by weight of 98% or more
- 3824 99 96 45Lithium nickel cobalt aluminium oxide powder (cas rn 177997-13-6) with: -a particle size of less than 10 μm, -a purity by weight of more than 98%
- 3824 99 96 46Manganese zinc ferrite granulate, containing by weight: - 52% or more but not more than 76% of iron(iii)oxide, - 13% or more but not more than 42% of manganese oxide, and - 2% or more but not more than 22% of zinc oxide
- 3824 99 96 47Mixed metals oxides, in the form of powder, containing by weight: - either 5% or more of barium, neodymium or magnesium and 15% or more of titanium, - or 30% or more of lead and 5% or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors
- 3824 99 96 48Zirconium oxide (zro2), calcium oxide stabilised (cas rn 68937-53-1) with a zirconium oxide content by weight of 92% or more but not more than 97%
- 3824 99 96 50Nickel hydroxide, doped with 12% or more but not more than 18% by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators
- 3824 99 96 53Rare-earth concentrate containing by weight 60% or more but not more than 95% of rare-earth oxides and not more than 1% each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5% or more by weight
- 3824 99 96 55Carrier in powder form, consisting of: - ferrite (iron oxide) (cas rn 1309-37-1) - manganese oxide (cas rn 1344-43-0) - magnesium oxide (cas rn 1309-48-4) - styrene acrylate copolymer to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers
- 3824 99 96 57Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (hplc) and sample preparation cartridges
- 3824 99 96 60Fused magnesia containing by weight 15% or more of dichromium trioxide
- 3824 99 96 62Viscous preparation essentially containing: -by weight more than 5% but not more than 15% of poly(vinyl alcohol) (cas rn 9002-89-5), -by weight more than 10% but not more than 20% of 1-methoxy-2-propanol (cas rn 107-98-2), -water, for use as a protective coating for wafers during the slicing process in the manufacture of semiconductors
- 3824 99 96 65Aluminium sodium silicate, in the form of spheres of a diameter of: - either 1.6mm or more but not more than 3.4mm, - or 4mm or more but not more than 6mm
- 3824 99 96 66Vulcanising agent containing by weight: -78% or more but not more than 82% of insoluble sulphur (cas rn 9035-99-8), -18% or more but not more than 22% of naphthenic oil (cas rn 64742-52-5), and -not more than 0.2% of methyl styrene (cas rn 98-83-9)
- 3824 99 96 68Lithium nickel dioxide (cas rn 12325-84-7) containing by weight: -less than 5% of lithium hydroxide (cas rn 1310-65-2), -less than 5% of lithium carbonate (cas rn 554-13-2), and -less than 15% of nickel oxide (cas rn 11099-02-8)
- 3824 99 96 73Reaction product, containing by weight: - 1% or more but not more than 40% of molybdenum oxide, - 10% or more but not more than 50% of nickel oxide, - 30% or more but not more than 70% of tungsten oxide
- 3824 99 96 74Mixture with a non-stoichiometric composition: - with a crystalline structure, - with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75% by weight of which consists of fractions with a grain size of 1-3 mm and at most 25% consists of fractions with a grain size of 0-1 mm
- 3824 99 96 78Zirconium oxide stabilised with yttrium oxide (cas rn 64417-98-7) containing by weight 90% or more of zirconium oxide
- 3824 99 96 80Mixture consisting of: - 64% or more, but not more than 74% by weight of amorphous silica (cas rn 7631-86-9) - 25% or more, but not more than 35% by weight of butanone (cas rn 78-93-3) and - not more than 1% by weight of 3-(2.3-epoxypropoxy)propyltrimethoxysilane (cas rn 2530-83-8)
- 3824 99 96 83Cubic boron nitride (cas rn 10043-11-5) coated with nickel and/or nickelphosphide (cas rn 12035-64-2)
- 3824 99 96 87Platinum oxide (cas rn 12035-82-4) fixed on a porous support of aluminium oxide (cas rn 1344-28-1), containing by weight: - 0.1% or more but not more than 1% of platinum, and - 0.5% or more but not more than 5% of ethylaluminium dichloride (cas rn 563-43-9)
- 3824 99 96 89Monosodium glutamate in mixture or in solution, containing by dry weight 50% or more of monosodium glutamate
- 3824 99 96 91Mixture, in pellet form, containing by weight: - 49% or more but not more than 50% of bis[3-(triethoxysilyl)propyl] polysulphides (cas rn 211519-85-6), and - 50% or more but not more than 51% of carbon black (cas rn 1333-86-4), of which 75% by weight or more pass through a sieve with an aperture of 0.60 mm, but not more than 10% pass through a sieve with an aperture of 0.25 mm (as determined by the astm d1511 method)
- 3824 99 96 99Prepared binders for foundry moulds or cores: other, other, other, other, other, other
3825 Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in note 6 to this chapter
- 3825 10 00 00Residual products of the chemical or allied industries: municipal waste
- 3825 20 00 00Residual products of the chemical or allied industries: sewage sludge
- 3825 30 00 00Residual products of the chemical or allied industries: clinical waste
- 3825 41 00 00Residual products of the chemical or allied industries: waste organic solvents, halogenated
- 3825 49 00 00Residual products of the chemical or allied industries: waste organic solvents, other
- 3825 50 00 00Wastes of metal-pickling liquors, hydraulic fluids, brake fluids and anti-freeze fluids
- 3825 61 00 00Mainly containing organic constituents
- 3825 69 00 00Other wastes from chemical or allied industries: other
- 3825 90 10 00Alkaline iron oxide for the purification of gas
- 3825 90 90 00Residual products of the chemical or allied industries: other, other
3826 Biodiesel and mixtures thereof, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals
- 3826 00 10 20Mixture of fatty acid methyl esters containing by weight: consigned from Canada
- 3826 00 10 29Mixture of fatty acid methyl esters containing by weight: other
- 3826 00 10 50Mixture of fatty acid methyl esters containing by weight: consigned from Canada
- 3826 00 10 59Mixture of fatty acid methyl esters containing by weight: other
- 3826 00 10 89Fatty-acid mono-alkyl esters, containing by weight 96.5%: other, consigned from Canada
- 3826 00 10 99Fatty-acid mono-alkyl esters, containing by weight 96.5%: other, other
- 3826 00 90 11Blends containing by weight more than 20% of fatty-acid: consigned from Canada
- 3826 00 90 19Blends containing by weight more than 20% of fatty-acid: other
- 3826 00 90 33Blends containing by weight 20% or less of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
- 3826 00 90 90Biodiesel and mixtures thereof, not containing: other, other
3827 Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included
- 3827 11 00 00Containing chlorofluorocarbons (cfcs), whether or not containing hydrochlorofluorocarbons (hcfcs), perfluorocarbons (pfcs) or hydrofluorocarbons (hfcs)
- 3827 12 00 00Containing chlorofluorocarbons: containing hydrobromofluorocarbons (hbfcs)
- 3827 13 00 00Containing chlorofluorocarbons: containing carbon tetrachloride
- 3827 14 00 00Containing 1.1,1-trichloroethane (methyl chloroform)
- 3827 20 00 00Containing bromochlorodifluoromethane (halon-1211), bromotrifluoromethane (halon-1301) or dibromotetrafluoroethanes (halon-2402)
- 3827 31 00 00Containing substances of subheadings 2903 41 to 2903 48
- 3827 32 00 00Other, containing substances of subheadings 2903 71 to 2903 75
- 3827 39 00 00Containing hydrochlorofluorocarbons: other
- 3827 40 00 00Containing methyl bromide (bromomethane) or bromochloromethane
- 3827 51 00 10R508a (containing 61% of hexafluoroethane (perfluoroethane) (pfc-116) and 39% of trifluoromethane (fluoroform) (hfc-23))
- 3827 51 00 20R508b (containing 54% of hexafluoroethane (perfluoroethane) (pfc-116) and 46% of trifluoromethane (fluoroform) (hfc-23))
- 3827 51 00 90Containing trifluoromethane: containing trifluoromethane (hfc-23), other
- 3827 59 00 00Containing trifluoromethane: other
- 3827 61 00 10R507a (containing 50% pentafluoroethane (hfc-125) and 50% of 1.1,1-trifluoroethane (hfc-143a))
- 3827 61 00 20R404a (containing 52% of 1.1,1-trifluoroethane (hfc-143a), 44% of pentafluoroethane (hfc-125) and 4% of 1.1,1.2-tetrafluoroethane (hfc-134a))
- 3827 61 00 90Containing 15% or more by mass of 1.1,1-trifluoroethane: other
- 3827 62 00 10Containing only 1.1,1-trifluoroethane and pentafluoroethane
- 3827 62 00 20Containing only 1.1,1-trifluoroethane, pentafluoroethane and 1.1,1.2-tetrafluoroethane
- 3827 62 00 30Containing only difluoromethane and pentafluoroethane
- 3827 62 00 40Containing only difluoromethane and pentafluoroethane and 1.1,1.2-tetrafluoroethane
- 3827 62 00 50R422d (containing 65.1% of pentafluoroethane (hfc-125), 31.5% of 1.1,1.2-tetrafluoroethane (hfc-134a) and 3.4% of isobutane)
- 3827 62 00 60R419a (containing 77% of pentafluoroethane (hfc-125), 19% of 1.1,1.2-tetrafluoroethane (hfc-134a), and 4% of dimethyl ether (r-e170))
- 3827 62 00 90Other, not included in the subheading above, containing 55%: other, other
- 3827 63 00 10Containing only 1.1,1-trifluoroethane and pentafluoroethane
- 3827 63 00 15Containing only 1.1,1-trifluoroethane, pentafluoroethane and 1.1,1.2-tetrafluoroethane
- 3827 63 00 20R410a (containing 50% of pentafluoroethane (hfc-125) and 50% of difluoromethane (hfc-32))
- 3827 63 00 29Containing only difluoromethane and pentafluoroethane: other
- 3827 63 00 30R407a (containing 40% of pentafluoroethane (hfc-125), 40% of 1.1,1.2-tetrafluoroethane (hfc-134a) and 20% of difluoromethane (hfc-32))
- 3827 63 00 39Containing only difluoromethane, pentafluoroethane: other
- 3827 63 00 40R452a (containing 59% of pentafluoroethane (hfc-125), 30% of 2.3,3.3-tetrafluoropropene (hfc-1234yf) and 11% of difluoromethane (hfc-32))
- 3827 63 00 49Other, not included in the subheadings above, containing: containing unsaturated hydrofluorocarbons, other
- 3827 63 00 90R417a (containing 50% of 1.1,1.2-tetrafluoroethane (hfc-134a), 46.6% of pentafluoroethane (hfc-125) and 3.4% of isobutane)
- 3827 63 00 99Other, not included in the subheadings above, containing: other, other
- 3827 64 00 10Containing only 1.1,1-trifluoroethane, pentafluoroethane and 1.1,1.2-tetrafluoroethane
- 3827 64 00 20R407c (containing 52% of 1.1,1.2-tetrafluoroethane (hfc-134a), 25% of pentafluoroethane (hfc-125) and 23% of difluoromethane (hfc-32))
- 3827 64 00 21R407f (containing 40% of 1.1,1.2-tetrafluoroethane (hfc-134a), 30% of difluoromethane (hfc-32) and 30% of pentafluoroethane (hfc-125))
- 3827 64 00 22R407h (containing 52.5% of 1.1,1.2-tetrafluoroethane (hfc-134a), 32.5% of difluoromethane (hfc-32) and 15% of pentafluoroethane (hfc-125))
- 3827 64 00 29Containing only difluoromethane, pentafluoroethane: other
- 3827 64 00 90Other, not included in the subheadings above, containing: other
- 3827 65 00 10Containing only difluoromethane, pentafluoroethane and 1.1,1.2-tetrafluoroethane
- 3827 65 00 20R448a (containing 26% of difluoromethane (hfc-32), 26% of pentafluoroethane (hfc-125), 21% of 1.1,1.2-tetrafluoroethane (hfc-134a), 20% of 2.3,3.3-tetrafluoropropene (hfc-1234yf) and 7% of 1.3,3.3-tetrafluoropropene (hfc-1234ze)
- 3827 65 00 21R449a (containing 25.7% of 1.1,1.2-tetrafluoroethane (hfc-134a), 25.3% of 2.3,3.3-tetrafluoropropene (hfc-1234yf), 24.7% of pentafluoroethane (hfc-125) and 24.3% of difluoromethane (hfc-32))
- 3827 65 00 29Other, not included in the subheadings above, containing: containing unsaturated hydrofluorocarbons, other
- 3827 65 00 90Other, not included in the subheadings above, containing: other
- 3827 68 00 10R452b (containing 67% of difluoromethane (hfc-32), 26% of 2.3,3.3-tetrafluoropropene (hfc-1234yf) and 7% of pentafluoroethane (hfc-125)
- 3827 68 00 20R455a (containing 75.5% of 2.3,3.3-tetrafluoropropene (hfc-1234yf), 21.5% of difluoromethane (hfc-32) and 3% of carbon dioxide)
- 3827 68 00 30Containing only 1.1,1.3,3-pentafluorobutane (hfc-365mfc) and 1.1,1.2,3.3,3-heptafluoropropane (hfc-227ea)
- 3827 68 00 40Containing only 1.1,1.3,3-pentafluorobutane (hfc-365mfc) and 1.1,1.3,3-pentafluoropropane (hfc-245fa)
- 3827 68 00 50R450a (containing 58% of 1.3,3.3-tetrafluoropropene (hfc-1234ze) and 42% of 1.1,1.2-tetrafluoroethane (hfc-134a))
- 3827 68 00 60R513a (containing 56% of 2.3,3.3-tetrafluoropropene (hfc-1234yf) and 44% of 1.1,1.2-tetrafluoroethane (hfc-134a))
- 3827 68 00 90Other, not included in the subheadings above, containing: other
- 3827 69 00 00Containing other hydrofluorocarbons: other
- 3827 90 00 10Mixtures containing by weight: - 60% or more but not more than 90% of 2-chloropropene (cas rn 557-98-2), - 8% or more but not more than 14% of (z)-1-chloropropene (cas rn 16136-84-8), - 5% or more but not more than 23% of 2-chloropropane (cas rn 75-29-6), - not more than 6% of 3-chloropropene (cas rn 107-05-1), and - not more than 1% of ethyl chloride (cas rn 75-00-3)
- 3827 90 00 90Mixtures containing halogenated derivatives of methane: other, other