Customs Tariff of Canada · tariff item · HS 7224.90
7224.90.00.00: Other
Other alloy steel semi-finished products
✓ Can be used in a customs declaration Data: Customs Tariff of Canada, in force from 11 September 2026 · checked on 24 October 2026
- 7224.90.00 Other
- 7224.90.00.00 Other
What you pay
Importing into Canada
Customs duty only: import VAT, other taxes and trade defence duties of this country are not covered here, and the duty calculator works only with the EU, Türkiye, US and UK tariffs.
Same subheading in other tariffs
7224.90 Other alloy steel in ingots or other primary forms: other
UK Free Third-country duty 11 tariff lines 
EU Free Third-country duty 9 tariff lines 
Türkiye Free – 14% Third-country duty 10 tariff lines · average 7% 
USA Free General (MFN) 1 tariff line 
Mexico Free General (MFN) 4 tariff lines 
Brazil 7.2% General (MFN) 1 tariff line 
Argentina 7.2% General (MFN) 6 tariff lines 
Peru Free General (MFN) 1 tariff line 
New Zealand Free General (MFN) 1 tariff line 
Japan Free General (MFN) 3 tariff lines 
Taiwan Free General (MFN) 7 tariff lines 
GCC 5% General (MFN) 1 tariff line 
Switzerland Free General (MFN) 1 tariff line 
Norway Free General (MFN) 2 tariff lines 
North Macedonia Free General (MFN) 9 tariff lines 
Nigeria 5% General (MFN) 1 tariff line Binding rulings for similar goods
Decisions of U.S. Customs and Border Protection (CROSS) and HMRC (Advance Tariff Rulings) on goods classified here. A ruling binds only its holder, but shows how the authorities classify similar goods. The descriptions are the authorities’ own, in English.
- N304361 U.S. CBP
The tariff classification of steel products from the United Kingdom
- 600016030 HMRC
Alloy steel bar, semi-finished with square cross section and rounded corners, produced by continuously casting into oscillating moulds to produce blooms and allowed to solidify, the steel is then subject to forging. During forging, the steel is heated above 1,175°C, fully converting its…
- 600014944 HMRC
A semi-finished round cornered square steel bar with a cross-section throughout its length. Sizes ranging from 95mm square up to 250.7mm square The main molten steel production methods include: Melting raw materials using either an Electric Arc Furnace or Basic Oxygen Furnace Ladle Furnace…
- 600009270 HMRC
Circular Section Other Alloy Steel Semi-finished Bars Steels purchased by this company that are produced from re-melted scrap primarily, although some steel mills do make small pig iron additions if required. The primary molten steel production routes methods are: 1. Electric Arc Furnace, or Basic…
Legal notes
Additional note
1. The following expressions have the meanings hereby assigned to them:
‘Electrical’: for the purposes of subheadings 72091610, 72091710, 72091810, 72092610, 72092710, 72092810 and 72112320, flat-rolled products which under a current at 50 Hz and a magnetic flux of 1 T have a watt-loss per kilogram, calculated by the Epstein method, of:
2,1 W or less, when their thickness does not exceed 0,20 mm,
3,6 W or less, when their thickness is not less than 0,20 mm but less than 0,60 mm,
6 W or less, when their thickness is not less than 0,60 mm but not greater than 1,50 mm.
‘Tinplate’: for the purposes of subheadings 72101220, 72107010, 72121010 and 72124020, flat-rolled products (of a thickness of less than 0,5 mm) coated with a layer of metal containing, by weight, 97 % or more of tin.
‘Tool steel’: for the purposes of subheadings 72241010, 72249002, 72253010, 72254012, 72269120, 72283020, 72284010, 72285020 and 72286020, alloy steels, other than stainless or high-speed steel, containing, by weight, one of the following compositions, with or without other elements:
less than 0,6 % of carbon
and
0,7 % or more of silicon and 0,05 % or more of vanadium
or
4 % or more of tungsten,
0,8 % or more of carbon
and
0,05 % or more of vanadium,
more than 1,2 % of carbon
and
not less than 11 % but not more than 15 % of chromium,
0,16 % or more but not more than 0,5 % of carbon
and
3,8 % or more but not more than 4,3 % of nickel
and
1,1 % or more but not more than 1,5 % of chromium
and
0,15 % or more but not more than 0,5 % of molybdenum,
0,3 % or more but not more than 0,5 % of carbon
and
1,4 % or more but not more than 2,1 % of chromium
and
0,15 % or more but not more than 0,5 % of molybdenum
and
less than 1,2 % of nickel,
0,3 % or more of carbon
and
less than 5,2 % of chromium
and
0,65 % or more of molybdenum or 0,4 % or more of tungsten,
0,5 % or more but not more than 0,6 % of carbon
and
1,25 % or more but not more than 1,8 % of nickel
and
0,5 % or more but not more than 1,2 % of chromium
and
0,15 % or more but not more than 0,5 % of molybdenum.
Tariff item 7224.90.00.00 is a line of the Customs Tariff of Canada under HS subheading 7224.90 (other alloy steel in ingots or other primary forms: other).
The MFN tariff rate is free, and quantities are declared in KGM.
For the same subheading, the UK duty is free, the EU duty is free, the Türkiye duty is 0%–14%, the US duty is free, the Mexico duty is free, the Brazil duty is 7.2%, the Argentina duty is 7.2%, the Peru duty is free, the New Zealand duty is free, the Japan duty is free, the Taiwan duty is free, the GCC duty is 5%, the Switzerland duty is free, the Norway duty is free, the North Macedonia duty is free and the Nigeria duty is 5%.
Canada imported goods of subheading 7224.90 worth US$231m in 2024; the largest supplier was Argentina, and the United Kingdom ranked 6th with US$3m.
Questions and answers
What is the Canada import duty for tariff item 7224.90.00.00?
The MFN tariff rate in the Customs Tariff of Canada is free; the supplementary unit is KGM. This page shows the rate as published by the national source and, where the source publishes them, preferential rates: choose the country of origin to see them. Trade defence duties and VAT are not covered.
Where does Canada import these goods from?
For subheading 7224.90 as a whole, the largest supplier in 2024 was Argentina (US$111m), followed by Italy.