Customs Tariff of Canada · tariff item · HS 7607.20
7607.20.00.10: Aluminum foil: backed, printed
Backed aluminium foil
✓ Can be used in a customs declaration Data: Customs Tariff of Canada, in force from 11 September 2026 · checked on 24 October 2026
- 7607 Aluminum foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm.
- 7607.20.00 Backed
- 7607.20.00.10 Printed
What you pay
Importing into Canada
Customs duty only: import VAT, other taxes and trade defence duties of this country are not covered here, and the duty calculator works only with the EU, Türkiye, US and UK tariffs.
Same subheading in other tariffs
7607.20 Aluminium foil: backed
Canada lines: 7607.20
Binding rulings for similar goods
Decisions of U.S. Customs and Border Protection (CROSS) and HMRC (Advance Tariff Rulings) on goods classified here. A ruling binds only its holder, but shows how the authorities classify similar goods. The descriptions are the authorities’ own, in English.
- N362921 U.S. CBP
The tariff classification of PET/Aluminum composite film from Germany
- N360725 U.S. CBP
The tariff classification of polyethylene aluminum composite panels from the United Arab Emirates
- N359641 U.S. CBP
The tariff classification of aluminum laminate film from Germany
- N355145 U.S. CBP
The tariff classification of printed and unprinted film from Columbia
- 600013419 HMRC
24 reels of foil tape. They are made mainly from aluminium. Comprising aluminium foil, coated on one side with adhesive, backed with releasing paper and wound onto a cardboard reel. The thickness of the foil itself (excluding the adhesive and paper backing) is approximately 0.065 mm. The width of…
21 rulings in total for this code
Legal notes
Additional notes
1. For the purposes of subheadings 76011010, 76012030 and 76012040, the following terms shall have the meaning hereby assigned to them:
‘slabs’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a rectangle or other polygon, of a width exceeding 800 mm, of a thickness exceeding 280 mm and of a length always superior to the width and to the thickness. These products are intended for being rolled;
‘billets’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a circle (including a ‘flattened circle’), of a diameter exceeding 125 mm.
2. For the purposes of subheadings 76061211 and 76061219, the following terms shall have the meaning hereby assigned to them:
‘beverage can body stock’: sheets or strips in coils, rolled, having manganese and magnesium as main alloying elements and having a minimum tensile strength of 262 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 300 mm or more but not more than 2000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,4 mm, and of a length always superior to the width and to the thickness. Beverage can body stock is prelubricated, with a bright surface;
‘beverage can end stock and tab stock’: sheets or strips in coils, having magnesium as the main alloying element and having a minimum tensile strength 345 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 30 mm or more but not more than 2000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,35 mm, and of a length always superior to the width and to the thickness. Beverage can end stock is varnished on both sides. Beverage can tab stock is degreased and oiled.
These products are to be used for the fabrication of rigid beverage cans, including ends (lids) and tabs.
3. For the purposes of subheadings 76061130, 76061230 and 76072091, the following term shall have the meaning hereby assigned to it:
‘Aluminium Composite Panel’: laminated goods consisting of two flat-rolled sheets or foils of aluminium, whether or not alloyed, each of them having a thickness of not less than 0,08 mm but not exceeding 0,55 mm, and a continuous core of non-porous polymer or mineral material, held together with an adhesive, all together having a thickness of 1,0 mm or more, but not exceeding 6,1 mm. The two external aluminium cover sheets or foils can have different finishes. These goods cannot be coiled.
In the Customs Tariff of Canada, 7607.20.00.10 is one of 2 lines under subheading 7607.20, aluminium foil: backed.
The MFN tariff rate is free, and quantities are declared in KGM.
For the same subheading, the UK duty is 6%–10%, the EU duty is 7.5%–10%, the Türkiye duty is 7.5%–10%, the US duty is 0%–3.7%, the Mexico duty is free, the Brazil duty is 10.8%, the Argentina duty is 10.8%, the Peru duty is free, the New Zealand duty is 5%, the Japan duty is 7.5%, the Taiwan duty is 6.5%, the GCC duty is 5%, the Switzerland duty is free, the Norway duty is free, the North Macedonia duty is free and the Nigeria duty is 10%.
Canada imported goods of subheading 7607.20 worth US$66m in 2024; the largest supplier was the United States, and the United Kingdom ranked 3rd with US$4m.
Questions and answers
What is the Canada import duty for tariff item 7607.20.00.10?
The MFN tariff rate in the Customs Tariff of Canada is free; the supplementary unit is KGM. This page shows the rate as published by the national source and, where the source publishes them, preferential rates: choose the country of origin to see them. Trade defence duties and VAT are not covered.
Where does Canada import these goods from?
For subheading 7607.20 as a whole, the largest supplier in 2024 was the United States (US$39m), followed by China.