EU Combined Nomenclature · CN code · HS 8442.30

8442 30 00

8442 30 00: Machinery, apparatus and equipment

✓ Can be used in a customs declaration Data: EU Combined Nomenclature, in force from 1 January 2026 · checked on 24 October 2026

  1. 8442 Machinery, apparatus and equipment (other than the machines of headings 8456 to 8465) for preparing or making plates, cylinders or other printing components; plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished):
  2. 8442 30 00 Machinery, apparatus and equipment

What you pay

Importing into EU

Customs duty Free standard rate depends on the country of origin
Additional duties and charges 2 additional measures Import requirements: 3
VAT standard rate of the member state of import, 17% to 27%
Duty calculatorCalculate duty and taxes →

Additional duties and import rules

Charges on top of the customs duty, and rules the goods must meet at the border.

Additional duties and charges 3

  • Duty on low-value parcelsLow-value consignment customs duty 3 EUR
    Applies to goods from
    all countries
    In force
    until 31 October 2026
    Legal act
    Regulation 0382/26
  • Duty on low-value parcelsLow-value consignment customs duty 3 EUR
    Applies to goods from
    all countries
    In force
    from 1 November 2026
    Legal act
    Regulation 0382/26
    Documents
    • C127 Merchant product identifier
    • C128 Non-standardised manufacturer product identifier
    • C129 Standardised manufacturer product identifier
    • Y081 No standardised manufacturer product identifier for the declared product exists
  • Handling feeUnion handling fee 2 EUR
    Applies to goods from
    all countries
    In force
    from 1 November 2026
    Legal act
    Regulation 2108/26
    Documents
    • Y126 Goods sold in distance sales

Import requirements 3

  • Prohibition or restrictionImport prohibition
    Applies to goods from
    North Korea
    Legal act
    Regulation 0285/18
  • Import control
    Applies to goods from
    Ukraine
    Legal act
    Regulation 0692/14
    Documents
    • Y997 Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
    • N864 Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
    • N954 Movement certificate EUR.1
  • Import control
    Applies to goods from
    Ukraine
    Legal act
    Regulation 0263/22
    Documents
    • Y984 Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
    • N954 Movement certificate EUR.1
    • N864 Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document

Export measures 4

Prohibitions, licences, controls and sanctions that apply when these goods leave the EU.

Export measuresDestinationLegal actValidity
Export prohibitionSanctions regime: North Korea North Korea Regulation 0285/18 28 February 2018
Export controlSanctions regime: Belarus Belarus Regulation 0765/06 1 July 2024
Export controlSanctions regime: Crimea and Sevastopol Ukraine Regulation 0692/14 25 February 2025
Export controlSanctions regime: Non-government-controlled areas of Ukraine Ukraine Regulation 0263/22 25 August 2022

TARIC data as of 20 November 2026

Import VAT in the EU member states

The rate each member state applies to goods of this code, from the Commission’s Taxes in Europe Database. A reduced rate can cover only part of the goods under a code: check the national VAT law.

  • Austria 20%
  • Belgium 21%
  • Bulgaria 20%
  • Croatia 25%
  • Cyprus 3% / 5% reduced rate
  • Czechia 21%
  • Denmark 25%
  • Estonia 24%
  • Finland 25.5%
  • France 20%
  • Germany 19%
  • Greece 24%
  • Hungary 27%
  • Ireland 23%
  • Italy 22%
  • Latvia 21%
  • Lithuania 21%
  • Luxembourg 17%
  • Malta 18%
  • Netherlands 21%
  • Poland 8% reduced rate
  • Portugal 23%
  • Romania 21%
  • Slovakia 23%
  • Slovenia 22%
  • Spain 21%
  • Sweden 25%

TEDB · 20 November 2026

EU: imports by month · HS 8442.30

last 12 months€23.5m-13% · previous 12 months
Average import price€38.70 per kg
Preferential rate0%
Jan 2024: €2.1mFeb 2024: €2.2mMar 2024: €953kApr 2024: €2.7mMay 2024: €2.2mJun 2024: €1.8mJul 2024: €1.4mAug 2024: €1.4mSept 2024: €2.2mOct 2024: €3.8mNov 2024: €2.1mDec 2024: €3.1mJan 2025: €1.2mFeb 2025: €2.2mMar 2025: €1.5mApr 2025: €1.5mMay 2025: €1.8mJun 2025: €2.4mJul 2025: €2.3mAug 2025: €3mSept 2025: €2.4mOct 2025: €3mNov 2025: €1.6mDec 2025: €1.4mJan 2026: €2mFeb 2026: €1.1mMar 2026: €2mApr 2026: €2.3mMay 2026: €1.7mJun 2026: €2.1mJul 2026: €1.7mAug 2026: €2.2m 202420252026
Data up to August 2026 (provisional) · Monthly data: Eurostat Comext (CC BY 4.0), HMRC (OGL v3.0)

Main suppliers, last 12 months

CountryValueShareChange
China €13.1m 56% +4.7%
Switzerland €4.1m 17.6% -25.6%
Japan €3.2m 13.5% +25%
United Kingdom €2.2m 9.5% -12.9%
United States €180k 0.8% -83.3%
Taiwan €139k 0.6% +308.3%
Mauritius €98k 0.4% —
Serbia €69k 0.3% +2,084.9%

Same subheading in other tariffs

8442.30 Machinery, apparatus and equipment

Legal notes

Chapter notes: Chapter 84 →

CN Explanatory Notes

The European Commission's explanatory notes on how to classify goods in these CN codes. They are not legally binding but customs authorities follow them; they complement the HS Explanatory Notes of the World Customs Organization.

8442 30 00 · Machinery, apparatus and equipment

This subheading includes phototypesetting and composing machines, which compose by successively photographing characters mounted on revolving discs or the face of special matrices or the characters created on a cathode-ray tube by a matrix of very small overlapping dots. This subheading also includes composing machines using a laser beam projected onto photographic film.

This subheading also includes machines for typefounding and typesetting (for example, linotypes, monotypes, intertypes), with or without founding device.

Type-founding may be a hand operation, or may be done mechanically by means of more or less complex machines. The apparatus and machines covered include:

1. matrices, small plates, usually of copper or nickel, impressed by means of a punch. They are used for casting separate printing types;

2. tables for levelling, by hand planing, the face of printing type. These consist essentially of a perfectly smooth table slit down the centre and fitted with a clamping device which holds the type in place;

3. automatic typefounders. In these, the printing type is made letter by letter, but is not set. They usually consist of an electrically heated crucible containing the molten metal, of a mould cooling device to accelerate the hardening, and of mechanisms for planing and levelling the type;

4. typecasting machines for rules, spacing material (furniture), etc., operating by extrusion;

5. composing sticks (or setting sticks) used to start the composition, and on which one or more lines of type are set by hand. They consist mainly of a small well planed wooden or metal plate, with flanges on two adjacent sides and often with a mobile clamping slide. The subheading includes galleys, similar, but larger, which hold the type for a whole page;

6. chases, cast iron or steel frames to hold several pages for printing. One, two or four pages are held in place in the chase by means of metal quoins (special metal wedges) or by mechanical wedging devices (nut or screw type, etc.) which also fall in this heading.

In addition to the above typefounding and typesetting machines and apparatus, there is a whole group of other machines which mechanically cast the type and also set it. This is done either as two distinct operations on two different but complementary machines (the first machine produces a perforated paper band which controls the second machine whose function is to cast the type either separately or in line blocks), or as one operation on the same machine. These machines, often very complex, include:

1. casting and setting machines for separate types (monotype) which, operating from a band previously perforated on a precomposing machine, select, by means of pneumatic relays, special matrices contained within the machine which produces the individual type characters and sets them in a galley (itself incorporated in the machine).

These machines are used in conjunction with a precomposing machine having a keyboard perforator which produces the precomposition on a paper tape. These precomposing machines are also classified here;

2. keyboard machines for casting and setting separate types, all operations being carried out on the same machine (Rototype, etc.);

3. typefounders for lineset type. The matrices, after being set in lines by hand, are incorporated in the machine which casts the type and delivers it in the form of a line of type (slug);

4. machines for setting and founding lines of type. These are complex keyboard machines of various types (Intertype, Linograph, etc.) which both set and cast the type in the form of lines on the same machine. Some of these machines are fitted with a device to enable them to operate from paper bands previously perforated on a separate machine which is also covered by this heading.

This subheading covers the machinery, apparatus and equipment for preparing or making plates, cylinders or other printing components described in the HS Explanatory Note to heading 8442, (A), (1) to (3).

This subheading does not, however, cover:

(a) general-purpose automatic data-processing machines which are used for photocomposition in addition to having bookkeeping and payroll accounting functions, for example, and for this purpose are connected by cable (on-line) to a phototypesetting and composing machine in order to control it and supply it with type-setting data (heading 8471 — see note 5(A) to this chapter);

(b) stand-alone telegraphic transmitter and receiver apparatus (heading 8517).

General notes to the chapter

NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF

General

For the purposes of subheadings 8407 34 10, 8407 90 50 and 8408 20 10, ‘for the industrial assembly’ applies only to the series-assembly of new vehicles in factories which manufacture or assemble motor vehicles (including subcontractors).

These subheadings can be applied only to engines actually used in the production of new vehicles of the kinds referred to in the subheadings. Consequently, they do not cover similar engines used as spare parts.

Explanatory Notes to the Combined Nomenclature of the European Union, Official Journal C (consolidated text and later amendments) · © European Union

This line in earlier years

The Combined Nomenclature of each year, as published in the Official Journal: description, third-country duty and supplementary unit.

YearDescriptionThird-country dutySupplementary unit
2026 Machinery, apparatus and equipment Free p/st
2025 unchanged Free p/st
2024 unchanged Free p/st
2023 unchanged Free p/st
2022 unchanged Free p/st
2021 unchanged Free p/st
2020 unchanged Free p/st
2019 Machinery, apparatus and equipment Free p/st

Code history

Since 2017; before, these goods were classified under 8442 30 10, 8442 30 91, 8442 30 99.

In the EU Combined Nomenclature, 8442 30 00 is one of 1 line under subheading 8442.30, machinery, apparatus and equipment.

The third-country duty is free, and quantities are declared in p/st.

In the 12 months to August 2026, the EU imported goods of subheading 8442.30 worth €23.5m (down 13% on the year before), at an average of €38.70 per kg; China supplied 56%, followed by Switzerland.

For the same subheading, the UK duty is free, the Türkiye duty is 1.7%, the US duty is free, the Canada duty is free, the Mexico duty is free, the Brazil duty is 7.2%–20%, the Argentina duty is 0%–12.6%, the Peru duty is free, the New Zealand duty is free, the Japan duty is free, the Taiwan duty is free, the GCC duty is 5%, the Switzerland duty is free, the Norway duty is free, the North Macedonia duty is 3% and the Nigeria duty is 5%.

EU member states imported goods of subheading 8442.30 worth US$118m in 2024; the largest supplier from outside the EU was China, and the United Kingdom ranked 4th with US$1m.

Questions and answers

What is the EU import duty for CN code 8442 30 00?

The third-country duty in the EU Combined Nomenclature is free; the supplementary unit is p/st. Preferential rates for goods from agreement countries, anti-dumping duties and VAT are not included.

Where does the EU import these goods from?

For subheading 8442.30 as a whole, the largest supplier from outside the EU in 2024 was China (US$6m), followed by Japan.

Download as CSV Follow changes (RSS)

Typical products

Everyday names, not part of the legal text.