8708 · Parts and accessories of the motor vehicles of headings 8701 to 8705
The explanatory note to subheading 8707 10 10 applies, mutatis mutandis, to parts and accessories intended for industrial assembly.
EU Combined Nomenclature · CN code · HS 8708.94
8708 94 99
8708 94 99: Steering wheels, steering columns and steering boxes: other, parts, other
Steering wheels, columns and boxes
Not declarable on its own: use one of its 8 subdivisions Data: EU Combined Nomenclature, in force from 1 January 2026 · checked on 24 October 2026
- 8708 Parts and accessories of the motor vehicles of headings 8701 to 8705:
- Other parts and accessories:
- 8708 94 Steering wheels, steering columns and steering boxes; parts thereof:
- Other:
- Parts:
- 8708 94 99 Other
What you pay
Importing into EU
Customs duty 3.5% standard rate depends on the country of origin
Additional duties and charges 4 additional measures Import requirements: 7 VAT standard rate of the member state of import, 17% to 27%
Duty calculatorCalculate duty and taxes → Additional duties and import rules
Charges on top of the customs duty, and rules the goods must meet at the border.
Additional duties and charges 11
- Duty suspensionAutonomous suspension under end-use Free
- Only for
- 8708 94 99 10 Hub gear made of cold rolled carbon steel (per ASTM A1008), molded into the plastic and pressed on pinion, with: -an outer diameter of 81,2 mm or more, but not more than 82,55 mm, -an inner diameter of 25,9 mm or more, but not more than 25,97 mm, -a height of the lower side of inner diameter of 11,63 mm or more, but not more than 12,13 mm, -a height of the upper side of inner diameter of 3,25 mm or more, but not more than 3,5 mm, -an overall height of 11,63 mm or more, but not more than 19,5 mm for use in the manufacture of vehicle's steering system
- Applies to goods from
- all countries except Belarus, Russia
- Legal act
- Regulation 2605/25
- Documents
- N990 EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Duty suspensionAutonomous suspension under end-use Free
- Only for
- 8708 94 99 20 Intermediate steering shaft forming part of the steering column with: -a torsional rigidity of 25 Nm/degree or more, -a tubular male shaft in welded carbon steel tube (per GB/T 699 grade 20), -a tubular female shaft in welded carbon steel tube (per with GB/T 699 grade 20), -two spiders universal joint made of chromium alloy steel (per GB/T 5216 grade 20CrMnTiH), -a length in nominal telescope position of 396 mm or more but not more than 467 mm, -a coupling interface on both ends with internal toothing, -two cardan joints on both sides, -a telescope shaft function with a range of 74 mm or more but not more than 115 mm, for use in the manufacture of vehicle's steering system
- Applies to goods from
- all countries except Belarus, Russia
- Legal act
- Regulation 2605/25
- Documents
- N990 EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Duty suspensionAutonomous suspension under end-use Free
- Only for
- 8708 94 99 30 Lower assist shaft as part of the steering column made of carbon steel (per GB/T699 grade 45 or JIS G4051 grade S45C) with: -an ultimate torsional strength load of 325 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, -a length of 66,39 mm or more but not more than 88,64 mm, -an outer diameter of 27,47 mm or more but not more than 28,38 mm, -an inner hole of diameter 6,50 mm or more but not more than 6,58 mm, -an external 26-teeth spline with major diameter 21,18 mm or more but not more than 21,44 mm, -a knurling on a part of outer surface of major diameter 26,0 mm or more but not more than 26,1 mm, -with or without an external 24-tooth spline and with a major diameter 24,75 mm or more but not more than 25 mm, for use in the manufacture of vehicle's steering system
- Applies to goods from
- all countries except Belarus, Russia
- Legal act
- Regulation 2605/25
- Documents
- N990 EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Duty suspensionAutonomous suspension under end-use Free
- Only for
- 8708 94 99 40 Upper assist shaft as part of the steering column made of carbon steel (per GB/T699 grade 45) with: -an ultimate torsional strength load of 325 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, -a length of 165,3 mm or more but not more than 204,2 mm, -an outer diameter of 22,87 mm or more but not more than 22,92 mm, -an internal hole of diameter 6,50 or more but not more than 6,58 mm, -an external spline, for use in the manufacture of vehicle's steering system
- Applies to goods from
- all countries except Belarus, Russia
- Legal act
- Regulation 2605/25
- Documents
- N990 EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Duty suspensionAutonomous suspension under end-use Free
- Only for
- 8708 94 99 50 Lower shaft as part of the steering column made of aluminium alloy (per ASTM B221M grade 6105), air quenched and tempered with: -an ultimate torsional strength of 260 Nm or more, -a length of 296,7 mm or more but not more than 297,8 mm, -an external 18-tooth spline on all shaft length with major diameter of 28,7 mm or more but not more than 29 mm, -an 18-tooth internal spline with a minor diameter of 19,7 mm or more but not more than 20 mm, for use in the manufacture of vehicle's steering system
- Applies to goods from
- all countries except Belarus, Russia
- Legal act
- Regulation 2605/25
- Documents
- N990 EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Duty suspensionAutonomous suspension under end-use Free
- Only for
- 8708 94 99 60 Torsion bar as part of the steering column made of carbon alloy steel (per SAE J1268, grade 5160H of modified chemistry for carbon content of 0,53 or more, but not more than 0,56) with: -a shaft torsional stiffness of 2,5 Nm/degree or more but not more than 2,7 Nm/degree, -a length of 107,75 mm or more but not more than 108,25 mm, -an outer diameter of 6,38 mm or more but not more than 6,42 mm, -two external 18-tooth splines on both shaft ends with a major diameter of 6,70 mm or more but not more than 6,85 mm, as interface to pressing with matting input and output shafts, -entire surface shot peened, for use in the manufacture of vehicle's steering system
- Applies to goods from
- all countries except Belarus, Russia
- Legal act
- Regulation 2605/25
- Documents
- N990 EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Duty suspensionAutonomous suspension under end-use Free
- Only for
- 8708 94 99 70 Tubular steering shaft as part of the steering column made of carbon steel welded tube (per EN 10305/2, E235 C or GB/T699 grade 20) with: -an ultimate torsional strength of 300 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, -a length of 245,48 mm or more but not more than 287,5 mm, -an outer diameter of 23,95 mm or more but not more than 32,25 mm, -an interface for steering wheel connection either in a form of an external 40-tooth spline with major diameter of 17,1 mm or more but not more than 17,5 mm and an internal thread M12x1,75-6H or in a form of an external hexagon with a short diagonal of 15,05 mm or more but not more than 15,35mm and an internal thread M10x1.5-6H, -an interface either in a form of an internal 10-tooth spline of length of 98.0 mm or more but not more than 160 mm, with minor diameter of 16,1 mm or more but not more than 16,4 mm or in a form of an internal 48-tooth spline of length of 151 mm or more but not more than 160 mm, with minor diameter of 23,2 mm or more but not more than 23,3 mm, for use in the manufacture of vehicle's steering system
- Applies to goods from
- all countries except Belarus, Russia
- Legal act
- Regulation 2605/25
- Documents
- N990 EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
- Duty suspensionAutonomous tariff suspension Free
- Only for
- 8708 94 99 80 Blank assembly worm gear, consisting of a hub of carbon steel (GB/T 699 grade 25 or DIN EN 10277 grade 11SMn30) and a ring of cast polyamide 6/12 with: - an outer diameter of 97,35 mm or more, but not more than 102,65 mm, - an inner diameter of 27,91 mm or more, but not more than 27,93 mm, - a height of the hub of 11,75 mm or more, but not more than 12,00 mm, - an overall height of 16,00 mm or more, but not more than 18,00 mm
- Applies to goods from
- all countries except Belarus, Russia
- Legal act
- Regulation 1463/26
- Duty on low-value parcelsLow-value consignment customs duty 3 EUR
- Applies to goods from
- all countries
- In force
- until 31 October 2026
- Legal act
- Regulation 0382/26
- Duty on low-value parcelsLow-value consignment customs duty 3 EUR
- Applies to goods from
- all countries
- In force
- from 1 November 2026
- Legal act
- Regulation 0382/26
- Handling feeUnion handling fee 2 EUR
- Applies to goods from
- all countries
- In force
- from 1 November 2026
- Legal act
- Regulation 2108/26
- Documents
- Y126 Goods sold in distance sales
Import requirements 9
- Import controlRestriction on entry into free circulation
- Applies to goods from
- Iraq, Syria
- Legal act
- Regulation 1210/03, Regulation 1332/13
- Import controlImport control on restricted goods and technologies
- Applies to goods from
- Libya
- Legal act
- Regulation 0044/16
- Documents
- Y920 Goods other than those described in the footnotes linked to the measure
- Import controlImport control on restricted goods and technologies
- Applies to goods from
- Russia
- In force
- until 31 July 2027
- Legal act
- Decision 0512/14
- Documents
- Y920 Goods other than those described in the footnotes linked to the measure
- Import controlImport control of fluorinated greenhouse gases
- Applies to goods from
- all countries
- Legal act
- Regulation 0573/24
- Documents
- Y152 Exemption from import prohibition, granted for repair or servicing of existing equipment, according to the second paragraph of Article 11.1 of Regulation (EU) 2024/573
- Y986 Exemption from import prohibition according to Article 11.1 and 11.2 of Regulation (EU) 2024/573
- Y160 Goods other than those falling under the applicable provisions of Regulation (EU) 2024/573
- Y169 Products and equipment, including parts (excluding military and repair exemption) listed in Annex IV containing F-gases or relies upon F-gases not subject to prohibition as imposed by Article 11.1. (Reg 2024/573).
- Y123 Undertaking registered in the F-Gas Portal according to Article 20 of Regulation (EU) 2024/573
- Y054 Goods labelled according to the provisions of Article 12 of Regulation (EU) 2024/573
- Y163 Net mass of fluorinated greenhouse gases charged in products and equipment
- Y121 Tonnes of CO₂ equivalent of bulk gases and of gases contained in products or equipment, and parts thereof
- Import controlImport control on ozone-depleting substances
- Applies to goods from
- all countries
- Legal act
- Regulation 0590/24
- Documents
- L100 Import licence " controlled substances" (ozone), issued by the Commission
- Y792 Substances, products, equipment, other than those falling within the scope of Regulation (EU) 2024/590
- Y791 Exemption from prohibition for ozone-depleting substances to be used for essential laboratory and analytical uses (articles 8, 13.1(c) (import) and article 14.1(a) (export) of regulation (EU) 2024/590), and for products and equipment (articles 11.1 and 13.1(j) (import) and 14.1(g) (export) of regulation (EU) 2024/590)
- Y789 Exemption from prohibition for products and equipment containing halons or whose functioning relies upon halons (see articles 13.1(h) (import) and 14.1(f) (export) of Regulation (EU) 2024/590)
- Y790 Exemption from prohibition for ozone-depleting substances destined to destruction or reclamation (see articles 12, 13.1(d), 13.1(e) (import) of Regulation (EU) 2024/590), and for products and equipment (see articles 12, 13.1(i) (import) of Regulation (EU) 2024/590)
- Y797 Licensing system registration identification number as defined in Article 17.3 (a) of Regulation (EU) 2024/590
- Y798 Declaration of net mass of ozone-depleting substance(s), when included in products and equipment
- Y799 Net mass of the ozone-depleting substance multiplied by the ODP of the ozone-depleting substance(s), also when included in products and equipment
- Import controlImport control on luxury goods
- Applies to goods from
- North Korea
- Legal act
- Regulation 2062/17
- Documents
- Y945 Travellers' personal effects or goods of a non-commercial nature for travellers' personal use contained in their luggage (Art 10.2 of Regulation (EU) 2017/1509)
- Y946 Goods necessary for the official purposes of diplomatic or consular missions of Member States in the DPRK or international organisations enjoying immunities in accordance with international law, or to the personal effects of their staff (Art 10.3 of Regulation (EU) 2017/1509)
- Y948 Goods other than those described in Annex VIII (Luxury goods) of Reg. (EU) 2017/1509
- Import control
- Applies to goods from
- Belarus, Ukraine
- Legal act
- Regulation 0765/06, Regulation 0692/14
- Documents
- Y727 The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 3)
- Y728 The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 4)
- L152 Import authorisation by virtue of article 1ra paragraph 10 of Council Regulation (EU) 765/2006
- Y870 Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 8f of Regulation (EU) No 765/2006)
- Y764 The prohibitions defined in article 1ra.1 of Council Regulation (EU) No 765/2006 do not apply (see contractual exemptions in article 1ra.9f)
- Y997 Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- N864 Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- N954 Movement certificate EUR.1
- Import control
- Applies to goods from
- Libya, Ukraine
- Legal act
- Regulation 0813/25, Regulation 0263/22
- Documents
- Y182 Goods other than those concerned by the prohibitions defined in article 3(a) of Regulation (EU) No 2016/44
- Y984 Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- N954 Movement certificate EUR.1
- N864 Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- Import control
- Applies to goods from
- Russia
- In force
- until 31 December 2027
- Legal act
- Regulation 0833/14
- Documents
- L142 Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
- Y874 The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
- L143 Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- Y859 Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
- Y681 The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3bg)
TARIC subdivisions
Declare the 10-digit TARIC code that fits the goods: measures can differ between subdivisions.
| 8708 94 99 10 | Hub gear made of cold rolled carbon steel (per ASTM A1008), molded into the plastic and pressed on pinion, with: -an outer diameter of 81,2 mm or more, but not more than 82,55 mm, -an inner diameter of 25,9 mm or more, but not more than 25,97 mm, -a height of the lower side of inner diameter of 11,63 mm or more, but not more than 12,13 mm, -a height of the upper side of inner diameter of 3,25 mm or more, but not more than 3,5 mm, -an overall height of 11,63 mm or more, but not more than 19,5 mm for use in the manufacture of vehicle's steering system |
| 8708 94 99 20 | Intermediate steering shaft forming part of the steering column with: -a torsional rigidity of 25 Nm/degree or more, -a tubular male shaft in welded carbon steel tube (per GB/T 699 grade 20), -a tubular female shaft in welded carbon steel tube (per with GB/T 699 grade 20), -two spiders universal joint made of chromium alloy steel (per GB/T 5216 grade 20CrMnTiH), -a length in nominal telescope position of 396 mm or more but not more than 467 mm, -a coupling interface on both ends with internal toothing, -two cardan joints on both sides, -a telescope shaft function with a range of 74 mm or more but not more than 115 mm, for use in the manufacture of vehicle's steering system |
| 8708 94 99 30 | Lower assist shaft as part of the steering column made of carbon steel (per GB/T699 grade 45 or JIS G4051 grade S45C) with: -an ultimate torsional strength load of 325 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, -a length of 66,39 mm or more but not more than 88,64 mm, -an outer diameter of 27,47 mm or more but not more than 28,38 mm, -an inner hole of diameter 6,50 mm or more but not more than 6,58 mm, -an external 26-teeth spline with major diameter 21,18 mm or more but not more than 21,44 mm, -a knurling on a part of outer surface of major diameter 26,0 mm or more but not more than 26,1 mm, -with or without an external 24-tooth spline and with a major diameter 24,75 mm or more but not more than 25 mm, for use in the manufacture of vehicle's steering system |
| 8708 94 99 40 | Upper assist shaft as part of the steering column made of carbon steel (per GB/T699 grade 45) with: -an ultimate torsional strength load of 325 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, -a length of 165,3 mm or more but not more than 204,2 mm, -an outer diameter of 22,87 mm or more but not more than 22,92 mm, -an internal hole of diameter 6,50 or more but not more than 6,58 mm, -an external spline, for use in the manufacture of vehicle's steering system |
| 8708 94 99 50 | Lower shaft as part of the steering column made of aluminium alloy (per ASTM B221M grade 6105), air quenched and tempered with: -an ultimate torsional strength of 260 Nm or more, -a length of 296,7 mm or more but not more than 297,8 mm, -an external 18-tooth spline on all shaft length with major diameter of 28,7 mm or more but not more than 29 mm, -an 18-tooth internal spline with a minor diameter of 19,7 mm or more but not more than 20 mm, for use in the manufacture of vehicle's steering system |
| 8708 94 99 60 | Torsion bar as part of the steering column made of carbon alloy steel (per SAE J1268, grade 5160H of modified chemistry for carbon content of 0,53 or more, but not more than 0,56) with: -a shaft torsional stiffness of 2,5 Nm/degree or more but not more than 2,7 Nm/degree, -a length of 107,75 mm or more but not more than 108,25 mm, -an outer diameter of 6,38 mm or more but not more than 6,42 mm, -two external 18-tooth splines on both shaft ends with a major diameter of 6,70 mm or more but not more than 6,85 mm, as interface to pressing with matting input and output shafts, -entire surface shot peened, for use in the manufacture of vehicle's steering system |
| 8708 94 99 70 | Tubular steering shaft as part of the steering column made of carbon steel welded tube (per EN 10305/2, E235 C or GB/T699 grade 20) with: -an ultimate torsional strength of 300 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, -a length of 245,48 mm or more but not more than 287,5 mm, -an outer diameter of 23,95 mm or more but not more than 32,25 mm, -an interface for steering wheel connection either in a form of an external 40-tooth spline with major diameter of 17,1 mm or more but not more than 17,5 mm and an internal thread M12x1,75-6H or in a form of an external hexagon with a short diagonal of 15,05 mm or more but not more than 15,35mm and an internal thread M10x1.5-6H, -an interface either in a form of an internal 10-tooth spline of length of 98.0 mm or more but not more than 160 mm, with minor diameter of 16,1 mm or more but not more than 16,4 mm or in a form of an internal 48-tooth spline of length of 151 mm or more but not more than 160 mm, with minor diameter of 23,2 mm or more but not more than 23,3 mm, for use in the manufacture of vehicle's steering system |
| 8708 94 99 80 | Blank assembly worm gear, consisting of a hub of carbon steel (GB/T 699 grade 25 or DIN EN 10277 grade 11SMn30) and a ring of cast polyamide 6/12 with: - an outer diameter of 97,35 mm or more, but not more than 102,65 mm, - an inner diameter of 27,91 mm or more, but not more than 27,93 mm, - a height of the hub of 11,75 mm or more, but not more than 12,00 mm, - an overall height of 16,00 mm or more, but not more than 18,00 mm |
| 8708 94 99 90 | Other |
Export measures 25
Prohibitions, licences, controls and sanctions that apply when these goods leave the EU.
| Export measures | Destination | Legal act | Validity |
|---|---|---|---|
| Export prohibitionSanctions regime: North Korea | North Korea | Regulation 0285/18 | 28 February 2018 |
| Restriction on exportSanctions regime: Iraq | All third countries | Regulation 1210/03 | 1 January 2007 |
| Export authorizationSanctions regime: Syria | All third countries | Regulation 1332/13 | 15 December 2013 |
| Export control on restricted goods and technologiesSanctions regime: Myanmar/Burma | Myanmar (Burma) | Regulation 0401/13 | 1 July 2023 |
| Export control on restricted goods and technologiesSanctions regime: Russia | Russia | Decision 0512/14 | 1 August 2014 – 31 July 2027 |
| Export control on restricted goods and technologiesSanctions regime: Iran (human rights) | Iran | Regulation 0264/12 | 9 February 2016 |
| Export control on restricted goods and technologiesSanctions regime: South Sudan | South Sudan | Regulation 0735/15 | 9 May 2015 |
| Export control on restricted goods and technologiesSanctions regime: Sudan | Sudan | Regulation 0747/14 | 11 July 2014 |
| Export control on restricted goods and technologiesSanctions regime: Venezuela | Venezuela | Regulation 2063/17 | 14 November 2017 |
| Export control on restricted goods and technologiesSanctions regime: Syria | Syria | Regulation 0036/12 | 19 January 2012 |
| Export control on restricted goods and technologiesSanctions regime: Zimbabwe | Zimbabwe | Regulation 0284/17 | 19 February 2017 |
| Export control on restricted goods and technologiesSanctions regime: Libya | Libya | Regulation 0044/16 | 20 January 2016 |
| Export control on restricted goods and technologiesSanctions regime: Belarus | Belarus | Regulation 0765/06 | 25 June 2021 |
| Export control on luxury goodsSanctions regime: Belarus | Belarus | Regulation 0765/06 | 1 July 2024 |
| Export control on luxury goodsSanctions regime: Russia | Russia | Regulation 0833/14 | 24 June 2023 |
| Export control on luxury goodsSanctions regime: North Korea | North Korea | Regulation 2062/17 | 28 June 2018 |
| Export controlSanctions regime: Central African Republic | Central African Republic | Decision 0798/13 | 8 April 2020 |
| Export controlSanctions regime: Haiti | Haiti | Regulation 2309/22 | 26 March 2025 |
| Export controlSanctions regime: Libya | Libya | Regulation 0813/25 | 29 April 2025 |
| Export controlSanctions regime: Russia | Russia | Regulation 0833/14 | 24 June 2023 |
| Export controlSanctions regime: Belarus | Belarus | Regulation 0765/06 | 25 February 2025 |
| Export controlSanctions regime: Iran | Iran | Regulation 0267/12 | 30 September 2025 |
| Export control on ozone-depleting substances | All third countries | Regulation 0590/24 | 11 March 2024 |
| Export control on cultural goods | All third countries | Regulation 0116/09 | 2 March 2009 |
| Export control of fluorinated greenhouse gases | All third countries | Regulation 0573/24 | 12 March 2025 |
TARIC data as of 26 October 2026
Import VAT in the EU member states
The rate each member state applies to goods of this code, from the Commission’s Taxes in Europe Database. A reduced rate can cover only part of the goods under a code: check the national VAT law.
-
Austria 20% -
Belgium 21% -
Bulgaria 20% -
Croatia 25% -
Cyprus 5% reduced rate -
Czechia 21% -
Denmark 25% -
Estonia 9% reduced rate -
Finland 25.5% -
France 20% -
Germany 19% -
Greece 24% -
Hungary 27% -
Ireland 23% -
Italy 22% -
Latvia 21% -
Lithuania 21% -
Luxembourg 17% -
Malta 18% -
Netherlands 21% -
Poland 23% -
Portugal 23% -
Romania 21% -
Slovakia 23% -
Slovenia 22% -
Spain 21% -
Sweden 25%
TEDB · 26 October 2026
Preferential rates by country
| Agreement or scheme | Countries | Rate |
|---|---|---|
| standard rate (no agreement) | — | 3.5% |
| GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) | Afghanistan, Angola, Bangladesh, Benin and 42 moreAfghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Congo - Kinshasa, Djibouti, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Myanmar (Burma), Nepal, Niger, Rwanda, São Tomé & Príncipe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Yemen, Zambia | Free |
| CARIFORUM | Antigua & Barbuda, Bahamas, Barbados, Belize and 10 moreAntigua & Barbuda, Bahamas, Barbados, Belize, Dominica, Dominican Republic, Grenada, Guyana, Jamaica, St Kitts & Nevis, St Lucia, St Vincent & the Grenadines, Suriname, Trinidad & Tobago | Free |
| OCTs (Overseas Countries and Territories) | Antarctica, Aruba, Caribbean Netherlands, Curaçao and 8 moreAntarctica, Aruba, Caribbean Netherlands, Curaçao, French Polynesia, French Southern Territories, Greenland, New Caledonia, Sint Maarten, St Barthélemy, St Pierre & Miquelon, Wallis & Futuna | Free |
| GSP - General arrangements | Congo - Brazzaville, Cook Islands, Indonesia, Kenya and 6 moreCongo - Brazzaville, Cook Islands, Indonesia, Kenya, Micronesia, Nigeria, Niue, Syria, Tajikistan, Vanuatu | Free |
| GSP+ (incentive arrangement for sustainable development and good governance) | Bolivia, Cape Verde, Kyrgyzstan, Mongolia and 4 moreBolivia, Cape Verde, Kyrgyzstan, Mongolia, Pakistan, Philippines, Sri Lanka, Uzbekistan | Free |
| Central America | Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua, Panama | Free |
| SADC EPA | Botswana, Eswatini, Namibia | Free |
| EEA - European Economic Area | Iceland, Liechtenstein, Norway | Free |
| Eastern and Southern Africa States | Mauritius, Seychelles, Zimbabwe | Free |
| EU–Andorra customs union | Andorra | Free |
| EU–Albania agreement | Albania | Free |
| EU–Bosnia & Herzegovina agreement | Bosnia & Herzegovina | Free |
| EU–Canada agreement | Canada | Free |
| EU–Switzerland agreement | Switzerland | Free |
| EU–Côte d’Ivoire agreement | Côte d’Ivoire | Free |
| EU–Chile agreement | Chile | Free |
| EU–Cameroon agreement | Cameroon | Free |
| EU–Colombia agreement | Colombia | Free |
| EU–Algeria agreement | Algeria | Free |
| EU–Ecuador agreement | Ecuador | Free |
| EU–Egypt agreement | Egypt | Free |
| Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. | Western Sahara | Free |
| EU–Fiji agreement | Fiji | Free |
| EU–Faroe Islands agreement | Faroe Islands | Free |
| EU–United Kingdom agreement | United Kingdom | Free |
| EU–Georgia agreement | Georgia | Free |
| EU–Ghana agreement | Ghana | Free |
| EU–Israel agreement | Israel | Free |
| EU–Jordan agreement | Jordan | Free |
| EU–Japan agreement | Japan | Free |
| EU–South Korea agreement | South Korea | Free |
| EU–Lebanon agreement | Lebanon | Free |
| EU–Morocco agreement | Morocco | Free |
| EU–Moldova agreement | Moldova | Free |
| EU–Montenegro agreement | Montenegro | Free |
| EU–North Macedonia agreement | North Macedonia | Free |
| EU–Mexico agreement | Mexico | Free |
| EU–New Zealand agreement | New Zealand | Free |
| EU–Peru agreement | Peru | Free |
| EU–Papua New Guinea agreement | Papua New Guinea | Free |
| EU–Palestinian Territories agreement | Palestinian Territories | Free |
| EU–Serbia agreement | Serbia | Free |
| EU–Singapore agreement | Singapore | Free |
| EU–San Marino customs union | San Marino | Free |
| EU–Tunisia agreement | Tunisia | Free |
| EU–Türkiye customs union | Türkiye | Free |
| EU–Ukraine agreement | Ukraine | Free |
| EU–United States agreement | United States | Free |
| EU–Vietnam agreement | Vietnam | Free |
| EU–Samoa agreement | Samoa | Free |
| EU–Kosovo agreement | Kosovo | Free |
| EU–South Africa agreement | South Africa | Free |
| Mercosur | Argentina, Brazil, Paraguay, Uruguay | 3% |
EU: imports by month · HS 8708.94
last 12 months€2bn-1% · previous 12 months
Average import price€11.92 per kg
Preferential rate60%
Main suppliers, last 12 months
| Country | Value | Share | Change |
|---|---|---|---|
 China | €460.6m | 23.1% | +13.7% |
 Morocco | €387.1m | 19.4% | -3.6% |
 Tunisia | €267.6m | 13.4% | -2.7% |
 Liechtenstein | €147m | 7.4% | -8.4% |
 South Korea | €145.5m | 7.3% | -13.9% |
 Türkiye | €120.4m | 6% | -3% |
 Japan | €119.2m | 6% | -7.9% |
 Serbia | €58.8m | 3% | +58% |
Same subheading in other tariffs
8708.94 Steering wheels, steering columns and steering boxes; parts thereof
UK 2% – 4% Third-country duty 12 tariff lines · average 2.4% Türkiye 3% – 4.5% Third-country duty 8 tariff lines · average 4.1% 
USA Free – 2.5% General (MFN) 6 tariff lines · average 0.8% 
Canada Free – 6% Third-country duty 4 tariff lines · average 3% 
Mexico Free Third-country duty 9 tariff lines 
Brazil 12.6% – 18% Third-country duty 7 tariff lines · average 15.7% 
Argentina 12.6% – 18% Third-country duty 18 tariff lines · average 17.1% 
Peru Free Third-country duty 1 tariff line 
New Zealand Free – 5% Third-country duty 3 tariff lines · average 3.3% Japan Free Third-country duty 1 tariff line 
Taiwan 4% – 7.5% Third-country duty 3 tariff lines · average 6.3% 
GCC 5% Third-country duty 6 tariff lines 
Switzerland Free Third-country duty 1 tariff line 
Norway Free Third-country duty 2 tariff lines 
North Macedonia Free – 4.5% Third-country duty 4 tariff lines · average 1.4% 
Nigeria 10% Third-country duty 1 tariff line EU lines: 8708.94
- 8708 94 20For the industrial assembly of:Vehicles of heading 8703;Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2800 cm3;Vehicles of heading 8705
- 8708 94 35Steering wheels, steering columns and steering boxes
- 8708 94 91Of closed-die forged steel
- 8708 94 99Steering wheels, steering columns and steering boxes: other, parts, other
Binding rulings for similar goods
Decisions of U.S. Customs and Border Protection (CROSS) and HMRC (Advance Tariff Rulings) on goods classified here. A ruling binds only its holder, but shows how the authorities classify similar goods. The descriptions are the authorities’ own, in English.
- N360321 U.S. CBP
The tariff classification and country of origin of a tie rod assembly
- N352712 U.S. CBP
The tariff classification and country of origin of ball joints and pitman arms
- N352155 U.S. CBP
The tariff classification and country of origin of inner and outer tie rods
- N349262 U.S. CBP
The tariff classification of steering coupler from South Korea
13 rulings in total for this code
Legal notes
Subheading note
1. Subheading 870822 covers:
(a) front windscreens (windshields), rear windows and other windows, framed; and
(b) front windscreens (windshields), rear windows and other windows, whether or not framed, incorporating heating devices or other electrical or electronic devices,
when suitable for use solely or principally with the motor vehicles of headings 8701 to 8705.
CN Explanatory Notes
The European Commission's explanatory notes on how to classify goods in these CN codes. They are not legally binding but customs authorities follow them; they complement the HS Explanatory Notes of the World Customs Organization.
General notes to the chapter
VEHICLES OTHER THAN RAILWAY OR TRAMWAY ROLLING STOCK, AND PARTS AND ACCESSORIES THEREOF
General
1. Throughout Chapter 87 of the Combined Nomenclature, ‘new vehicles’ means:
(a) vehicles which have not been permanently registered for more than 6 months, regardless of the number of km they have been driven, or
(b) vehicles which have not been driven for more than 6 000 kilometres, regardless of the time they have been permanently registered.
Temporary registration of the vehicles for the purpose of transport to the place where they will be permanently registered is not considered as permanent registration.
2. Throughout Chapter 87 of the Combined Nomenclature, ‘used vehicles’ means vehicles which do not fulfil the definition of ‘new’ vehicles under point 1.
Explanatory Notes to the Combined Nomenclature of the European Union, Official Journal C (consolidated text and later amendments) · © European Union
This line in earlier years
The Combined Nomenclature of each year, as published in the Official Journal: description, third-country duty and supplementary unit.
| Year | Description | Third-country duty | Supplementary unit |
|---|---|---|---|
| 2026 | Other | 3.5% | — |
| 2025 | unchanged | 3.5% | — |
| 2024 | unchanged | 3.5% | — |
| 2023 | unchanged | 3.5% | — |
| 2022 | unchanged | 3.5% | — |
| 2021 | unchanged | 3.5% | — |
| 2020 | unchanged | 3.5% | — |
| 2019 | Other | 3.5% | — |
CN code 8708 94 99 is a line of the EU Combined Nomenclature under HS subheading 8708.94 (steering wheels, steering columns and steering boxes; parts thereof).
The third-country duty is 3.5%, and quantities are declared in —.
148 countries pay no duty in the EU thanks to trade agreements and preference schemes such as GSP-EBA and CARIFORUM, against a standard rate of 3.5%.
Imports of steering wheels, columns and boxes (HS 8708.94) into the EU came to €2bn between September 2025 and August 2026 (down 1% on the year before); China supplied 23%, followed by Morocco.
For the same subheading, the UK duty is 2%–4%, the Türkiye duty is 3%–4.5%, the US duty is 0%–2.5%, the Canada duty is 0%–6%, the Mexico duty is free, the Brazil duty is 12.6%–18%, the Argentina duty is 12.6%–18%, the Peru duty is free, the New Zealand duty is 0%–5%, the Japan duty is free, the Taiwan duty is 4%–7.5%, the GCC duty is 5%, the Switzerland duty is free, the Norway duty is free, the North Macedonia duty is 0%–4.5% and the Nigeria duty is 10%.
EU member states imported goods of subheading 8708.94 worth US$9bn in 2024; the largest supplier from outside the EU was Morocco, and the United Kingdom ranked 8th with US$68m.
Questions and answers
What is the EU import duty for CN code 8708 94 99?
The third-country duty in the EU Combined Nomenclature is 3.5%; the supplementary unit is —. Preferential rates for goods from agreement countries, anti-dumping duties and VAT are not included.
Which countries get a lower rate on 8708 94 99?
152 countries have a preferential rate on this line, 148 of them at 0%, under GSP-EBA, CARIFORUM and OCTs and other arrangements. The rate applies only to goods that meet the rules of origin of the agreement, with proof of origin. Choose the country of origin on this page to see its rate.
Where does the EU import these goods from?
For subheading 8708.94 as a whole, the largest supplier from outside the EU in 2024 was Morocco (US$605m), followed by China.
Typical products
Everyday names, not part of the legal text.