Customs Import Tariff of Taiwan
Customs Import Tariff of Taiwan, chapter 72: Iron and steel
- 767Tariff lines
- FreeRate
Chapter 72 has 767 lines in the Customs Import Tariff of Taiwan, spread over 29 headings.
Rates run at duty-free; 767 lines are duty-free.
The most detailed heading is 7219 (flat-rolled products of stainless steel, of a width of 600 mm or more) with 149 lines.
The most common rate is zero, on 767 lines.
7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms
- 7201.10.00.10Non-alloy pig iron containing by weight 0.5% or less of phosphorus, and 2.0% or more of silicon
- 7201.10.00.20Non-alloy pig iron containing by weight 0.5% or less of phosphorus, and 1.5% or more but less than 2.0% of silicon
- 7201.10.00.30Non-alloy pig iron containing by weight 0.5% or less of phosphorus, and 1.2% or more but less than 1.5% of silicon
- 7201.10.00.40Non-alloy pig iron containing by weight 0.5% or less of phosphorus, and less than 1.2% of silicon
- 7201.10.00.90Other non-alloy pig iron containing by weight 0.5% or less of phosphorus
- 7201.20.00.00Non-alloy pig iron, in pigs, blocks or other primary forms, containing by weight more than 0.5% of phosphorus
- 7201.50.10.00Alloy pig iron, in pigs, blocks or other primary forms
- 7201.50.20.00Spiegeleisen, in pigs, blocks or other primary forms
7202 Ferro-alloys
- 7202.11.00.00Ferro-manganese, containing by weight more than 2% of carbon
- 7202.19.00.00Ferro-manganese containing by weight not exceeding 2% of carbon
- 7202.21.00.00Ferro-silicon containing by weight more than 55% of silicon
- 7202.29.00.00Ferro-silicon, containing by weight not exceeding 55% of silicon
- 7202.30.00.00Ferro-silico-manganese
- 7202.41.00.00Ferro-chromium, containing by weight more than 4% of carbon
- 7202.49.00.00Ferro-chromium, containing by weight not exceeding 4% of carbon
- 7202.50.00.00Ferro-silico-chromium
- 7202.60.00.00Ferro-nickel
- 7202.70.00.00Ferro-molybdenum
- 7202.80.10.00Ferro-tungsten
- 7202.80.20.00Ferro-silico-tungsten
- 7202.91.10.00Ferro-titanium
- 7202.91.20.00Ferro-silico-titanium
- 7202.92.00.00Ferro-vanadium
- 7202.93.00.00Ferro-niobium (ferro-columbium)
- 7202.99.10.00Ferro-aluminium-nickel-cobalt
- 7202.99.90.00Other ferro-alloys
7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel
- 7204.10.00.00Waste and scrap of cast iron
- 7204.21.00.00Waste and scrap of stainless steel
- 7204.29.00.00Waste and scrap of other alloy steels
- 7204.30.00.00Waste and scrap of tinned iron or steel
- 7204.41.00.00Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
- 7204.49.20.00Plate cutting
- 7204.49.90.10Scrap metal of iron or steel sheets and plates from ship
- 7204.49.90.90Other waste and scrap, of iron or steel
- 7204.50.00.00Remelting scrap ingots
7205 Granules and powders, of pig iron, spiegeleisen, iron or steel
7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)
7207 Semi-finished products of iron or non-alloy steel
- 7207.11.00.11Semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% but more than 0.12% of carbon, of rectangular (including square) cross-section, of a width of 200 mm or more and measuring less than twice the thickness
- 7207.11.00.12Semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% but more than 0.12% of carbon, of rectangular (including square) cross-section, of a width of 200 mm and measuring less than twice the thickness
- 7207.11.00.21Semi-finished products of iron or non-alloy steel, containing by weight 0.12% or less of carbon, of rectangular (including square) cross-section, of a width of 200 mm or more and measuring less than twice the thickness
- 7207.11.00.22Semi-finished products of iron or non-alloy steel, containing by weight 0.12% or less of carbon, of rectangular (including square) cross-section, of a width of 200 mm and measuring less than twice the thickness
- 7207.12.00.10Other semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% but more than 0.12% of carbon, of rectangular (other than square) cross-section
- 7207.12.00.20Other semi-finished products of iron or non-alloy steel, containing by weight 0.12% or less of carbon, of rectangular (other than square) cross-section
- 7207.19.00.10Other semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% but more than 0.12% of carbon
- 7207.19.00.20Other semi-finished products of iron or non-alloy steel, containing by weight 0.12% or less of carbon
- 7207.20.00.11Semi-finished products of iron or non-alloy steel, containing by weight 0.25% or more but less than 0.6% of carbon, of rectangular (including square) cross-section, of a width of 200 mm or more and measuring less than twice the thickness
- 7207.20.00.12Semi-finished products of iron or non-alloy steel, containing by weight 0.25% or more but less than 0.6% of carbon, of rectangular (including square) cross-section, of a width of less than 200 mm and measuring less than twice the thickness
- 7207.20.00.13Semi-finished products of iron or non-alloy steel, containing by weight 0.25% or more but less than 0.6% of carbon, of rectangular cross-section
- 7207.20.00.19Other semi-finished products of iron or non-alloy steel, containing by weight 0.25% or more but less than 0.6% of carbon
- 7207.20.00.21Semi-finished products of iron or non-alloy steel, containing by weight 0.6% or more of carbon, of rectangular (including square) cross-section, of a width of 200 mm or more and measuring less than twice the thickness
- 7207.20.00.22Semi-finished products of iron or non-alloy steel, containing by weight 0.6% or more of carbon, of rectangular (including square) cross-section, of a width of less than 200 mm and measuring less than twice the thickness
- 7207.20.00.23Semi-finished products of iron or non-alloy steel, containing by weight 0.6% or more of carbon, of rectangular cross-section
- 7207.20.00.29Other semi-finished products of iron or non-alloy steel, containing by weight 0.6% or more of carbon
7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
- 7208.10.10.10Flat-rolled products of iron or non-alloy steel, hot-rolled in coils, with patterns in relief, of a thickness of 4.75 mm or more
- 7208.10.10.20Flat-rolled products of iron or non-alloy steel, hot-rolled in coils, with patterns in relief, of a thickness of 3 mm or more but less than 4.75 mm
- 7208.10.90.10Flat-rolled products of iron or non-alloy steel, hot-rolled in coils, with patterns in relief, of a thickness of less than 3 mm
- 7208.10.90.90Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils
- 7208.25.10.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of 4.75 mm or more but less than 6 mm, containing by weight 0.6% or more of carbon
- 7208.25.10.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of 6 mm or more, containing by weight 0.6% or more of carbon
- 7208.25.20.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of 4.75 mm or more but less than 6 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.25.20.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of 6 mm or more, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.25.30.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of 4.75% mm or more but less than 6 mm, containing by weight less than 0.25% of carbon
- 7208.25.30.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of 6 mm or more, containing by weight less than 0.25% of carbon
- 7208.26.10.00Other flat-rolled products of iron or non-alloy steel, pickled, of a thickness of 3 mm or more but less than 4.75 mm, hot-rolled, in coils, containing by weight 0.6% or more of carbon
- 7208.26.20.00Other flat-rolled products of iron or non-alloy steel, pickled, of a thickness of 3 mm or more but less than 4.75 mm, hot-rolled, in coils, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.26.30.00Other flat-rolled products of iron or non-alloy steel, pickled, of a thickness of 3 mm or more but less than 4.75 mm, hot-rolled, in coils, containing by weight less than 0.25% of carbon
- 7208.27.10.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of 1.5 mm or more but less than 3 mm, containing by weight 0.6% or more of carbon
- 7208.27.10.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of less than 1.5 mm, containing by weight 0.6% or more of carbon
- 7208.27.20.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of 1.5 mm or more but less than 3 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.27.20.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of less than 1.5 mm, containing by weight 0.25% ormore but less than 0.6% of carbon
- 7208.27.30.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of 1.5 mm or more but less than 3 mm, containing by weight less than 0.25% of carbon
- 7208.27.30.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, pickled, of a thickness of less than 1.5 mm, containing by weight less than 0.25% of carbon
- 7208.36.10.00Other flat-rolled products of iron or non-alloy steel, of a thickness exceeding 10 mm, hot-rolled in coils, containing by weight 0.6% or more of carbon
- 7208.36.20.00Other flat-rolled products of iron or non-alloy steel, of a thickness exceeding 10 mm, hot-rolled in coils, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.36.30.00Other flat-rolled products of iron or non-alloy steel, of a thickness exceeding 10 mm, hot-rolled, in coils, containing by weight less than 0.25% of carbon
- 7208.37.10.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of 4.75 mm or more but not exceeding 6 mm, containing by weight 0.6% or more of carbon
- 7208.37.10.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of 6 mm or more but not exceeding 10 mm, containing by weight 0.6% or more of carbon
- 7208.37.20.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of 4.75 mm or more but not exceeding 6 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.37.20.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of 6 mm or more but not exceeding 10 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.37.30.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of 4.75 mm or more but not exceeding 6 mm, containing by weight less than 0.25% of carbon
- 7208.37.30.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of 6 mm or more but not exceeding 10 mm, containing by weight less than 0.25% of carbon
- 7208.38.10.00Other flat-rolled products of iron or non-alloy steel, of a thickness of 3 mm or more but less than 4.75 mm, hot-rolled, in coils, containing by weight 0.6% or more of carbon
- 7208.38.20.00Other flat-rolled products of iron or non-alloy steel, of a thickness of 3 mm or more but less than 4.75 mm, hot-rolled, in coils, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.38.30.00Other flat-rolled products of iron or non-alloy steel, of a thickness of 3 mm or more but less than 4.75 mm, hot-rolled, in coils, containing by weight less than 0.25% of carbon
- 7208.39.10.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of 1.5 mm or more but less than 3 mm, containing by weight 0.6% or more of carbon
- 7208.39.10.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness 0f less than 1.5 mm, containing by weight 0.6% or more of carbon
- 7208.39.20.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of 1.5 mm or more but less than 3 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.39.20.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of less than 1.5 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.39.30.10Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of 1.5 mm, or more but less than 3 mm, containing by weigh less than 0.25% of carbon
- 7208.39.30.20Other flat-rolled products of iron or non-alloy steel, hot-rolled in coils, of a thickness of less than 1.5 mm, containing by weight less than 0.25% of carbon
- 7208.40.10.00Flat-rolled products of iron or non-alloy steel, hot-rolled, not in coils, of a thickness of 50 mm or more, with patterns in relief
- 7208.40.21.10Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, with patterns in relief, of a thickness of 4.75 mm or more but less than 50 mm
- 7208.40.21.20Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, with patterns in relief, of a thickness of 3 mm or more but less than 4.75 mm
- 7208.40.29.10Other flat-rolled products of iron or non-alloy steel, hot-rolled, not in coils, with patterns in relief, of a thickness of less than 3 mm
- 7208.40.29.90Other flat-rolled products of iron or non-alloy steel, hot-rolled, not in coils, with patterns in relief
- 7208.51.10.10Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 50 mm or more, containing by weight 0.6% or more of carbon
- 7208.51.10.20Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 50 mm or more, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.51.10.30Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 50 mm or more, containing by weight less than 0.25% of carbon
- 7208.51.20.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, not in coils, of a thickness of less than 50 mm but exceeding 10 mm, containing by weight 0.6% or more of carbon
- 7208.51.30.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, not in coils, of a thickness of less than 50 mm but exceeding 10 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.51.40.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, not in coils, of a thickness of less than 50 mm but exceeding 10 mm, containing by weight less than 0.25% of carbon
- 7208.52.10.10Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 4.75 mm or more but not exceeding 6 mm, containing by weight 0.6% or more of carbon
- 7208.52.10.20Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 6 mm or more but not exceeding 10 mm, containing by weight 0.6% or more of carbon
- 7208.52.20.10Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 4.75 mm or more but not exceeding 6 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.52.20.20Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 6 mm or more but not exceeding 10 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.52.30.10Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 4.75 mm or more but not exceeding 6 mm, containing by weight less than 0.25% of carbon
- 7208.52.30.20Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 6 mm or more but not exceeding 10 mm, containing by weight less than 0.25% of carbon
- 7208.53.10.00Other flat-rolled products of iron or non-alloy steel, hot- rolled, not in coils, of a thickness of 3 mm or more, but less than 4.75 mm, containing by weight 0.6% or more of carbon
- 7208.53.20.00Other flat-rolled products of iron or non-alloy steel, hot- rolled, not in coils, of a thickness of 3 mm or more, but less than 4.75 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.53.30.00Other flat-rolled products of iron or non-alloy steel, hot- rolled, not in coils, of a thickness of 3 mm or more, but less than 4.75 mm, containing by weight less than 0.25% of carbon
- 7208.54.10.10Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 1.5 mm or more but less than 3 mm, containing by weight 0.6% or more of carbon
- 7208.54.10.20Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of less than 1.5 mm, containing by weight 0.6% or more of carbon
- 7208.54.20.10Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 1.5 mm or more but less than 3 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.54.20.20Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of less than 1.5 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.54.30.10Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of 1.5 mm or more but less than 3 mm, containing by weight less than 0.25% of carbon
- 7208.54.30.20Other flat-rolled products of iron or non-alloy steel, hot-rolled not in coils, of a thickness of less than 1.5 mm, containing by weight less than 0.25% of carbon
- 7208.90.10.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a width of 600 mm or more, of a thickness of 50 mm or more
- 7208.90.21.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a width of 600 mm or more, of a thickness of 3 mm or more but less than 50mm, containing by weight 0.6% or more of carbon
- 7208.90.22.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a width of 600 mm or more, of a thickness of less than 3 mm, containing by weight 0.6% or more of carbon
- 7208.90.30.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a width of 600 mm or more, containing by weight 0.25% or more but less than 0.6% of carbon
- 7208.90.40.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a width of 600 mm or more, containing by weight less than 0.25% of carbon
7209 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
- 7209.15.10.10Flat-roll products of iron or non-alloy steel, cold-rolled (cold-reduced), annealed and skin-passed, in coils, of a thickness of 3 mm or more, containing by weight 0.6% or more of carbon
- 7209.15.10.90Other flat-roll products of iron or non-alloy steel, cold-rolled (cold-reduced), in coils, of a thickness of 3 mm or more, containing by weight 0.6% or more of carbon
- 7209.15.20.10Flat-roll products of iron or non-alloy steel, cold-rolled (cold-reduced), annealed and skin-passed, in coils, of a thickness of 3 mm or more, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.15.20.90Other flat-roll products of iron or non-alloy steel, cold-rolled (cold-reduced), in coils, of a thickness of 3 mm or more, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.15.30.10Flat-roll products of iron or non-alloy steel, cold-rolled (cold-reduced), annealed and skin-passed, in coils, of a thickness of 3 mm or more, containing by weight less than 0.25% of carbon
- 7209.15.30.90Other flat-roll products of iron or non-alloy steel, cold-rolled (cold-reduced), in coils, of a thickness of 3 mm or more, containing by weight less than 0.25% of carbon
- 7209.16.10.10Flat-rolled products of iron or non-alloy steel, of a thickness exceeding 1 mm but less than 3 mm, cold-rolled (cold-reduced), annealed and skin-passed, in coils, containing by weight 0.6% or more of carbon
- 7209.16.10.90Other flat-rolled products of iron or non-alloy steel, of a thickness exceeding 1 mm but less than 3 mm, cold-rolled (cold-reduced), in coils, containing by weight 0.6% or more of carbon
- 7209.16.20.10Flat-rolled products of iron or non-alloy steel, of a thickness exceeding 1 mm but less than 3 mm, cold-rolled (cold-reduced), annealed and skin-passed, in coils, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.16.20.90Other flat-rolled products of iron or non-alloy steel, of a thickness exceeding 1 mm but less than 3 mm, cold-rolled (cold-reduced), in coils, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.16.30.10Flat-rolled products of iron or non-alloy steel, of a thickness exceeding 1 mm but less than 3 mm, cold-rolled (cold-reduced), annealed and skin-passed, in coils, containing by weight less than 0.25% of carbon
- 7209.16.30.90Other flat-rolled products of iron or non-alloy steel, of a thickness exceeding 1 mm but less than 3 mm, cold-rolled (cold-reduced), in coils, containing by weight less than 0.25% of carbon
- 7209.17.10.10Flat-rolled products of iron or non-alloy steel, of a thickness of 0.5 mm or more but not exceeding 1 mm, cold-rolled (cold-reduced), annealed and skin-passed, in coils, containing by weight 0.6% or more of carbon
- 7209.17.10.90Other flat-rolled products of iron or non-alloy steel, of a thickness of 0.5 mm or more but not exceeding 1 mm, cold-rolled (cold-reduced), in coils, containing by weight 0.6% or more of carbon
- 7209.17.20.10Flat-rolled products of iron or non-alloy steel, of a thickness of 0.5 mm or more but not exceeding 1 mm, cold-rolled (cold-reduced), annealed and skin-passed, in coils, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.17.20.90Other flat-rolled products of iron or non-alloy steel, of a thickness of 0.5 mm or more but not exceeding 1 mm, cold-rolled (cold-reduced), in coils, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.17.30.10Flat-rolled products of iron or non-alloy steel, of a thickness of 0.5 mm or more but not exceeding 1 mm, cold-rolled (cold-reduced), annealed and skin-passed, in coils, containing by weight less than 0.25% of carbon
- 7209.17.30.90Other flat-rolled products of iron or non-alloy steel, of a thickness of 0.5 mm or more but not exceeding 1 mm, cold-rolled (cold-reduced), in coils, containing by weight less than 0.25% of carbon
- 7209.18.10.11Flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), annealed and skin-passed, in coils, of a thickness of 0.32 mm or more but less than 0.5 mm, containing by weight 0.6% or more of carbon
- 7209.18.10.19Other flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), in coils, of a thickness of 0.32 mm or more but less than 0.5 mm, containing by weight 0.6% or more of carbon
- 7209.18.10.21Flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), annealed and skin-passed, in coils, of a thickness of less than 0.32 mm, containing by weight 0.6% or more of carbon
- 7209.18.10.29Other flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), in coils, of a thickness of less than 0.32 mm, containing by weight 0.6% or more of carbon
- 7209.18.20.11Flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), annealed and skin-passed, in coils, of a thickness of 0.32 mm or more but less than 0.5 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.18.20.19Other flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), in coils, of a thickness of 0.32 mm or more but less than 0.5 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.18.20.21Flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), annealed and skin-passed, in coils, of a thickness of less than 0.32 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.18.20.29Other flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), in coils, of a thickness of less than 0.32 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.18.30.11Flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), annealed and skin-passed, in coils, of a thickness of 0.32 mm or more but less than 0.5 mm, containing by weight less than 0.25% of carbon
- 7209.18.30.19Other flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), in coils, of a thickness of 0.32 mm or more but less than 0.5 mm, containing by weight less than 0.25% of carbon
- 7209.18.30.21Flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), not annealed and skin-passed, in coils, of a thickness of less than 0.32 mm, containing by weight less than 0.25% of carbon
- 7209.18.30.29Other flat-rolled products of iron or non-alloy steel cold-rolled (cold-reduced), in coils, of a thickness of less than 0.32 mm, containing by weight less than 0.25% of carbon
- 7209.25.10.00Flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), not in coils, of a thickness of 3 mm or more, containing by weight 0.6% or more of carbon
- 7209.25.20.00Flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), not in coils, of a thickness of 3 mm or more, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.25.30.00Flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), not in coils, of a thickness of 3 mm or more, containing by weight less than 0.25% of carbon
- 7209.26.10.00Flat-rolled products of iron or non-alloy steel, of a thickness exceeding 1 mm but less than 3 mm, cold-rolled (cold-reduced), not in coils, containing by weight 0.6% or more of carbon
- 7209.26.20.00Flat-rolled products of iron or non-alloy steel, of a thickness exceeding 1 mm but less than 3 mm, cold-rolled (cold-reduced), not in coils, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.26.30.00Flat-rolled products of iron or non-alloy steel, of a thickness exceeding 1 mm but less than 3 mm, cold-rolled (cold-reduced), not in coils, containing by weight less than 0.25% of carbon
- 7209.27.10.00Flat-rolled products of iron or non-alloy steel, of a thickness of 0.5 mm or more but not exceeding 1 mm, cold- rolled (cold-reduced), not in coils, containing by weight 0.6% or more of carbon
- 7209.27.20.00Flat-rolled products of iron or non-alloy steel, of a thickness of 0.5 mm or more but not exceeding 1 mm, cold- rolled (cold-reduced), not in coils, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.27.30.00Flat-rolled products of iron or non-alloy steel, of a thickness of 0.5 mm or more but not exceeding 1 mm, cold- rolled (cold-reduced), not in coils, containing by weight less than 0.25% of carbon
- 7209.28.10.10Flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), not in coils, of a thickness 0.32 mm or more but less than 0.5 mm, containing by weight 0.6% or more of carbon
- 7209.28.10.20Flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), not in coils, of a thickness of less than 0.32 mm, containing by weight 0.6% or more of carbon
- 7209.28.20.10Flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), not in coils, of a thickness of 0.32 mm, or more but less than 0.5 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.28.20.20Flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), not in coils, of a thickness of less than 0.32 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.28.30.10Flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), not in coils, of a thickness of 0.32 mm, or more but less than 0.5 mm, containing by weight less than 0.25% of carbon
- 7209.28.30.20Flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), not in coils, of a thickness of less than 0.32 mm, containing by weight less than 0.25% of carbon
- 7209.90.10.00Other flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), containing by weight 0.6% or more of carbon
- 7209.90.21.00Other flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), of a thickness of 0.5 mm or more, but less than 3 mm, containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.90.29.00Other flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), containing by weight 0.25% or more but less than 0.6% of carbon
- 7209.90.31.00Other flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), of a thickness of 0.5 mm or more, but less than 3 mm, containing by weight less than 0.25% of carbon
- 7209.90.39.00Other flat-rolled products of iron or non-alloy steel, cold-rolled (cold-reduced), containing by weight less than 0.25% of carbon
7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
- 7210.11.00.00Flat-rolled products of iron or non-alloy steel, plated or coated with tin, of a thickness of 0.5 mm or more
- 7210.12.00.00Flat-rolled products of iron or non-alloy steel, plated or coated with tin, of a thickness of less than 0.5 mm
- 7210.20.00.00Flat-rolled products of iron or non-alloy steel, plated or coated with lead, including terne-plate
- 7210.30.00.10Steel of electrolytically plated or coated with pure zinc
- 7210.30.00.20Steel of electrolytically plated or coated with alloy of zinc-nickle
- 7210.30.00.90Steel of electrolytically plated or coated with other alloy of zinc
- 7210.41.00.00Flat-rolled products of iron or non-alloy steel, otherwise plated or coated with zinc, corrugated
- 7210.49.00.31Flat-rolled products of iron or non-alloy steel, plated or coated with zinc (not corrugated), of a thickness less than 0.5 mm
- 7210.49.00.32Flat-rolled products of iron or non-alloy steel, plated or coated with zinc (not corrugated), of a thickness of 0.5 mm or more but less than 1.5 mm
- 7210.49.00.33Flat-rolled products of iron or non-alloy steel, plated or coated with zinc (not corrugated), of a thickness of 1.5 mm or more
- 7210.49.00.41Flat-rolled products of iron or non-alloy steel, plated or coated with zinc-iron alloy (not corrugated), of a thickness less than 0.5 mm
- 7210.49.00.42Flat-rolled products of iron or non-alloy steel, plated or coated with zinc-iron alloy (not corrugated), of a thickness of 0.5 mm or more but less than 1.5 mm
- 7210.49.00.43Flat-rolled products of iron or non-alloy steel, plated or coated with zinc-iron alloy (not corrugated), of a thickness of 1.5 mm or more
- 7210.49.00.51Flat-rolled products of iron or non-alloy steel, plated or coated with zinc-aluminium alloys (not corrugated), of a thickness less than 0.5 mm
- 7210.49.00.52Flat-rolled products of iron or non-alloy steel, plated or coated with zinc-aluminium alloys (not corrugated), of a thickness of 0.5 mm or more but less than 1.5 mm
- 7210.49.00.53Flat-rolled products of iron or non-alloy steel, plated or coated with zinc-aluminium alloys (not corrugated), of a thickness of 1.5 mm or more
- 7210.49.00.61Flat-rolled products of iron or non-alloy steel, plated or coated with zinc-aluminium-magnesium alloys(not corrugated), of a thickness less than 0.5 mm
- 7210.49.00.62Flat-rolled products of iron or non-alloy steel, plated or coated with zinc-aluminium-magnesium alloys(not corrugated), of a thickness of 0.5 mm or more but less than 1.5 mm
- 7210.49.00.63Flat-rolled products of iron or non-alloy steel, plated or coated with zinc-aluminium-magnesium alloys(not corrugated), of a thickness of 1.5 mm or more
- 7210.49.00.90Other flat-rolled products of iron or non-alloy steel, plated or coated with zinc (not corrugated)
- 7210.50.00.00Flat-rolled products of iron or non-alloy steel, plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61.00.11Flat-rolled products of iron or non-alloy steel, plated or coated with aluminium-zinc alloys, of a thickness less than 0.5 mm
- 7210.61.00.12Flat-rolled products of iron or non-alloy steel, plated or coated with aluminium-zinc alloys, of a thickness of 0.5 mm or more but less than 1.5 mm
- 7210.61.00.13Flat-rolled products of iron or non-alloy steel, plated or coated with aluminium-zinc alloys, of a thickness of 1.5 mm or more
- 7210.69.00.00Other flat-rolled products of iron or non-alloy steel, plated or coated with aluminium
- 7210.70.10.00Flat-rolled products of iron or non-alloy steel, painted, varnished or coated with plastics, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 6.5 W/kg or more
- 7210.70.20.00Flat-rolled products of iron or non-alloy steel, painted, varnished or coated with plastics, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 5 W/kg or more but less than 6.5 W/kg
- 7210.70.30.00Flat-rolled products of iron or non-alloy steel, painted, varnished or coated with plastics, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss less than 5 W/kg
- 7210.70.90.21Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with aluminium-zinc alloys, in coils, of a thickness less than 0.25 mm
- 7210.70.90.22Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with aluminium-zinc alloys, in coils, of a thickness of 0.25 mm or more but less than 0.55 mm
- 7210.70.90.23Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with aluminium-zinc alloys, in coils, of a thickness of 0.55 mm or more
- 7210.70.90.31Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on electrolytically plated or coated with zinc or zinc-alloy, in coils, of a thickness less than 0.25 mm
- 7210.70.90.32Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on electrolytically plated or coated with zinc or zinc-alloy, in coils, of a thickness of 0.25 mm or more but less than 0.55 mm
- 7210.70.90.33Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on electrolytically plated or coated with zinc or zinc-alloy, in coils, of a thickness of 0.55 mm or more
- 7210.70.90.41Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on cold-rolled, in coils, of a thickness less than 0.25 mm
- 7210.70.90.42Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on cold-rolled, in coils, of a thickness of 0.25 mm or more but less than 0.55 mm
- 7210.70.90.43Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on cold-rolled, in coils, of a thickness of 0.55 mm or more
- 7210.70.90.51Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc, in coils, of a thickness less than 0.25 mm
- 7210.70.90.52Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc, in coils, of a thickness of 0.25 mm or more but less than 0.55 mm
- 7210.70.90.53Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc, in coils, of a thickness of 0.55 mm or more
- 7210.70.90.54Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc-aluminium alloys, in coils, of a thickness less than 0.25 mm
- 7210.70.90.55Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc-aluminium alloys, in coils, of a thickness of 0.25 mm or more but less than 0.55 mm
- 7210.70.90.56Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc-aluminium alloys, in coils, of a thickness of 0.55 mm or more
- 7210.70.90.57Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc-aluminium-magnesium alloys, in coils, of a thickness less than 0.55 mm
- 7210.70.90.58Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc-aluminium-magnesium alloys, in coils, of a thickness of 0.55 mm or more
- 7210.70.90.59Other flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc alloys, in coils
- 7210.70.90.71Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc, not in coils
- 7210.70.90.72Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc-aluminium alloys, not in coils
- 7210.70.90.73Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc-aluminium-magnesium alloys, not in coils
- 7210.70.90.74Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with aluminium-zinc alloys, not in coils
- 7210.70.90.75Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on electrolytically plated or coated with zinc or zinc-alloy, not in coils
- 7210.70.90.76Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on cold-rolled, not in coils
- 7210.70.90.79Other flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, not in coils
- 7210.70.90.91Other flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, in coils, of a thickness less than 0.25 mm
- 7210.70.90.92Other flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, in coils, of a thickness of 0.25 mm or more but less than 0.55 mm
- 7210.70.90.93Other flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, in coils, of a thickness of 0.55 mm or more
- 7210.90.10.00Other flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 6.5 W/kg or more
- 7210.90.20.00Other flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 5 W/kg and more but less than 6.5 W/kg
- 7210.90.30.00Other flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss less than 5 W/kg
- 7210.90.90.00Other flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
7211 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
- 7211.13.10.00Flat-rolled products of iron or non-alloy steel, hot-rolled, rolled on four faces or in a closed box pass, of a width exceeding 150 mm and of a thickness of 50 mm or more, not in coils and without patterns in relief, not clad, plated or coated
- 7211.13.20.10Flat-rolled products of iron or non-alloy steel, hot-rolled, rolled on four faces or in a closed box pass, of a width exceeding 150 mm and of a thickness not less than 4 mm but not exceeding 6 mm, in coils and without patterns in relief, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.13.20.20Flat-rolled products of iron or non-alloy steel, hot-rolled, rolled on four faces or in a closed box pass, of a width exceeding 150 mm and of a thickness 6 mm or more but less than 50 mm, not in coils and without patterns in relief, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.13.30.10Flat-rolled products of iron or non-alloy steel, hot-rolled, rolled on four faces or in a closed box pass, of a width exceeding 150 mm and of a thickness not less than 4 mm but not exceeding 6 mm, not in coils and without patterns in relief, not clad, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.13.30.20Flat-rolled products of iron or non-alloy steel, hot-rolled, rolled on four faces or in a closed box pass, of a width exceeding 150 mm and of a thickness 6 mm, or more but less than 50 mm, not in coils and without patterns in relief, not clad, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.13.40.10Flat-rolled products of iron or non-alloy steel, hot-rolled, rolled on four faces or in a closed box pass, of a width exceeding 150 mm and of a thickness not less than 4 mm but not exceeding 6 mm, not in coils and without patterns in relief, not clad, plated or coated, containing by weight less than 0.25% of carbon
- 7211.13.40.20Flat-rolled products of iron or non-alloy steel, hot-rolled, rolled on four faces or in a closed box pass, of a width exceeding 150 mm and of a thickness 6 mm or more but less than 50 mm, not in coils and without patterns in relief, not clad, plated or coated, containing by weight less than 0.25% of carbon
- 7211.14.10.10Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of 50 mm or more, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.14.10.20Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of 50 mm or more, not clad, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.14.10.30Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of 50 mm or more, not clad, plated or coated, containing by weight less than 0.25% of carbon
- 7211.14.20.10Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of 4.75 mm or more but not exceeding 6 mm, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.14.20.20Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness exceeding 6 mm, but less than 50 mm, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.14.30.10Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of 4.75 mm or more but not exceeding 6 mm, not clad, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.14.30.20Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness exceeding 6 mm but less than 50 mm, not clad, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.14.40.10Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of 4.75 mm or more but not exceeding 6 mm, not clad, plated or coated, containing by weight less than 0.25% of carbon
- 7211.14.40.20Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness exceeding 6 mm but less than 50 mm, not clad, plated or coated, containing by weight less than 0.25% of carbon
- 7211.19.10.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of 3 mm or more but less than 4.75 mm, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.19.20.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of 3 mm or more but less than 4.75 mm, not clad, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.19.30.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of 3 mm or more but less than 4.75mm, not clad, plated or coated, containing by weight less than 0.25% of carbon
- 7211.19.40.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of less than 3 mm, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.19.50.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of less than 3 mm, not clad, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.19.60.00Other flat-rolled products of iron or non-alloy steel, hot-rolled, of a thickness of less than 3 mm, not clad, plated or coated, containing by weight less than 0.25% of carbon
- 7211.23.10.10Flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but less than 3 mm, not clad, plated or coated, containing by weight less than 0.25% of carbon
- 7211.23.10.20Flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of 0.32 mm or more but less than 0.5 mm, not clad, plated or coated, containing by weight less than 0.25% of carbon
- 7211.23.10.30Flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of less than 0.32 mm, not clad, plated or coated, containing by weight less than 0.25% of carbon
- 7211.23.20.00Flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of 3 mm or more, containing by weight less than 0.25% of carbon, not clad, plated or coated
- 7211.29.11.10Other flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but less than 3 mm, not clad, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.29.11.20Other flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of 0.32 mm or more but less than 0.5 mm, not clad, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.29.11.30Other flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of less than 0.32 mm, not clad, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.29.12.00Other flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled(cold-reduced), not clad, plated or coated, of a thickness of 3 mm or more, containing by weight 0.25% or more but less than 0.6% of carbon
- 7211.29.20.10Other flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of 3 mm or more, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.29.20.20Other flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but less than 3 mm, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.29.20.30Other flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of 0.32 mm or more but less than 0.5 mm, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.29.20.40Other flat-rolled products of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a thickness of less than 0.32 mm, not clad, plated or coated, containing by weight 0.6% or more of carbon
- 7211.90.10.00Other flat-rolled products of iron or non-alloy steel, further worked than hot and cold-rolled, not clad, plated or coated, of a thickness of less than 0.5 mm
- 7211.90.20.00Other flat-rolled products of iron or non-alloy steel, futher worked than hot and cold-rolled, not clad, plated or coated, of a thickness of 0.5 mm or more but less than 3 mm
- 7211.90.30.00Other flat-rolled products of iron or non-alloy steel, further worked than hot and cold-rolled, not clad, plated or coated, of a thickness of 3 mm or more but less than 50 mm
- 7211.90.40.00Other flat-rolled products of iron or non-alloy steel, further worked than hot and cold-rolled, not clad, plated or coated, of a thickness of 50 mm or more
7212 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
- 7212.10.00.00Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, plated or coated with tin
- 7212.20.00.00Flat-rolled products of iron or non-alloy steel, of electrolytically plated or coated with zinc
- 7212.30.00.10Flat-rolled products of iron or non-alloy steel, based on cold-rolled, otherwise plated or coated with zinc or zinc-alloy
- 7212.30.00.20Flat-rolled products of iron or non-alloy steel, based on hot-rolled, otherwise plated or coated with zinc or zinc-alloy
- 7212.40.10.00Flat-rolled products of iron or non-alloy steel, painted, varnished or coated with plastics, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 6.5 W/kg or more
- 7212.40.20.00Flat-rolled products of iron or non-alloy steel, painted, varnished or coated with plastics, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 5 W/kg or more but less than 6.5 W/kg
- 7212.40.30.00Flat-rolled products of iron or non-alloy steel, painted, varnished or coated with plastics, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss less than 5 W/kg
- 7212.40.90.00Other flat-rolled products of iron or non-alloy steel, painted, varnished or coated with plastics
- 7212.50.10.00Flat-rolled products of iron or non-alloy steel, otherwise plated or coated, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 6.5 W/kg or more
- 7212.50.20.00Flat-rolled products of iron or non-alloy steel, otherwise plated or coated, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 5 W/kg and more but less than 6.5 W/kg
- 7212.50.30.00Flat-rolled products of iron or non-alloy steel, otherwise plated or coated, with electrical characteristics, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss less than 5 W/kg
- 7212.50.90.00Flat-rolled products of iron or non-alloy steel, otherwise plated or coated
- 7212.60.00.00Flat-rolled products of iron or non-alloy steel, of clad
7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
- 7213.10.00.00Bars and rods, hot-rolled, of iron or non-alloy steel, containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7213.20.00.11Other bars and rods, hot-rolled of iron or non-alloy steel, of free-cutting steel, containing by weight 0.10% or more of lead and less than 14 mm in diameter
- 7213.20.00.12Other bars and rods, hot-rolled of iron or non-alloy steel, of free-cutting steel, containing by weight 0.10% or more of lead and 14 mm or more but less than 42 mm in diameter
- 7213.20.00.13Other bars and rods, hot-rolled of iron or non-alloy steel, of free-cutting steel, containing by weight 0.10% or more 0f lead and 42 mm or more in diameter
- 7213.20.00.21Other bars and rods, hot-rolled of iron or non-alloy steel, of free-cutting steel, containing by weight 0.08% or more of sulphur and less than 14 mm in diameter
- 7213.20.00.22Other bars and rods, hot-rolled, of iron or non-alloy steel, of free-cutting steel, containing by weight 0.08% or more of sulphur and 14 mm or more but less than 42 mm in diameter
- 7213.20.00.23Other bars and rods, hot-rolled, of iron or non-alloy steel, of free-cutting steel, containing by weight 0.08% or more of sulphur and 42 mm or more in diameter
- 7213.20.00.91Other bars and rods, hot-rolled, of iron or non-alloy steel, of free-cutting steel, of less than 14 mm in diameter
- 7213.20.00.92Other bars and rods, hot-rolled, of iron or non-alloy steel, of free-cutting steel, of 14 mm or more but less than 42 mm in diameter
- 7213.20.00.93Other bars and rods, hot-rolled, of iron or non-alloy steel, of free-cutting steel, of 42 mm or more
- 7213.91.10.00Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, containing by weight less than 0.25% of carbon, of circular cross-section measuring less than 14 mm in diameter
- 7213.91.20.00Bars and rods, hot-rolled, of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter, containing by weight 0.25% or more but less than 0.6% of carbon
- 7213.91.30.00Bars and rods, hot-rolled, of high carbon steel, of circular cross-section measuring less than 14 mm in diameter, containing by weight 0.6% or more of carbon
- 7213.99.10.10Other bars and rods, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring 14 mm or more but less than 42 mm in diameter, containing by weight less than 0.25% of carbon
- 7213.99.10.20Other bars and rods, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring 42 mm or more in diameter, containing by weight less than 0.25% of carbon
- 7213.99.10.90Other bars and rods, in irregularly wound coils, of iron or non-alloy steel, containing by weight less than 0.25% of carbon
- 7213.99.20.10Other bars and rods, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring 14 mm or more but less than 42 mm in diameter, containing by weight 0.25% or more but less than 0.6% of carbon
- 7213.99.20.20Other bars and rods, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring 42 mm or more in diameter, containing by weight 0.25% or more but less than 0.6% of carbon
- 7213.99.20.90Other bars and rods, in irregularly wound coils, of iron or non-alloy steel, containing by weight 0.25% or more but less than 0.6% of carbon
- 7213.99.30.10Other bars and rods, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring 14 mm or more but less than 42 mm in diameter, containing by weight 0.6% or more of carbon
- 7213.99.30.20Other bars and rods, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring 42 mm or more in diameter, containing by weight 0.6% or more of carbon
- 7213.99.30.90Other bars and rods, in irregularly wound coils, of iron or non-alloy steel, containing by weight 0.6% or more of carbon
7214 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
- 7214.10.10.00Other bars and rods of iron or non-alloy steel, forged, containing by weight less than 0.25% of carbon
- 7214.10.20.00Other bars and rods of iron or non-alloy steel, forged, containing by weight 0.25% or more but less than 0.6% of carbon
- 7214.10.30.00Other bars and rods of iron or non-alloy steel, forged, containing by weight 0.6% or more of carbon
- 7214.20.00.00Other bars and rods, of iron or non-alloy steel, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
- 7214.30.00.11Other bars and rods of free-cutting steel, containing by weight 0.10% or more of lead and less than 14 mm in diameter
- 7214.30.00.12Other bars and rods of free-cutting steel, containing by weight 0.10% or more of lead and 14 mm or more but less than 42 mm in diameter
- 7214.30.00.13Other bars and rods, of free-cutting steel, containing by weight 0.10% or more of lead and 42 mm or more in diameter
- 7214.30.00.21Other bars and rods of free-cutting steel, containing by weight 0.08% or more of sulphur and less than 14 mm in diameter
- 7214.30.00.22Other bars and rods of free-cutting steel, containing by weight 0.08% or more of sulphur and 14 mm or more but less than 42 mm in diameter
- 7214.30.00.23Other bars and rods of free-cutting steel, containing by weight 0.08% or more of sulphur and 42 mm or more in diameter
- 7214.30.00.91Other bars and rods of free-cutting steel, of circular cross-section measuring less than 14 mm in diameter
- 7214.30.00.92Other bars and rods of free-cutting steel, of circular cross-section measuring 14 mm or more but less than 42 mm in diameter
- 7214.30.00.93Other bars and rods of free-cutting steel, of circular cross-section measuring 42 mm or more in diameter
- 7214.91.10.00Other bars and rods of iron or non-alloy steel, of rectangular (other than square) cross-section, containing by weight less than 0.25% of carbon
- 7214.91.20.00Other bars and rods of iron or non-alloy steel, of rectangular (other than square) cross-section, containing by weight 0.25% or more but less than 0.6% of carbon
- 7214.91.30.00Other bars and rods of iron or non-alloy steel, of rectangular (other than square) cross-section, containing by weight 0.6% or more of carbon
- 7214.99.10.10Other bars and rods of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter, containing by weight less than 0.25% of carbon
- 7214.99.10.20Other bars and rods of iron or non-alloy steel, of circular cross-section measuring 14 mm or more but less than 42 mm in diameter, containing by weight less than 0.25% of carbon
- 7214.99.10.30Other bars and rods of iron or non-alloy steel, of circular cross-section measuring 42 mm or more but less than 70 mm in diameter, containing by weight less than 0.25% of carbon
- 7214.99.10.40Other bars and rods of iron or non-alloy steel, of circular cross-section measuring 70 mm or more in diameter, containing by weight less than 0.25% of carbon
- 7214.99.10.90Other bars and rods of iron or non-alloy steel, containing by weight less than 0.25% of carbon
- 7214.99.20.10Other bars and rods of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter, containing by weight 0.25% or more but less than 0.6% of carbon
- 7214.99.20.20Other bars and rods of iron or non-alloy steel, of circular cross-section measuring 14 mm or more but less than 42 mm in diameter, containing by weight 0.25% or more but less than 0.6% of carbon
- 7214.99.20.30Other bars and rods of iron or non-alloy steel, of circular cross-section measuring 42 mm or more but less than 70 mm in diameter, containing by weight 0.25% or more but less than 0.6% of carbon
- 7214.99.20.40Other bars and rods of iron or non-alloy steel, of circular cross-section measuring 70 mm or more in diameter, containing by weight 0.25% or more but less than 0.6% of carbon
- 7214.99.20.90Other bars and rods of iron or non-alloy steel, containing by weight 0.25% or more but less than 0.6% of carbon
- 7214.99.30.10Other bars and rods of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter, containing by weight 0.6% or more of carbon
- 7214.99.30.20Other bars and rods of iron or non-alloy steel, of circular cross-section measuring 14 mm or more but less than 42 mm in diameter, containing by weight 0.6% or more of carbon
- 7214.99.30.30Other bars and rods of iron or non-alloy steel, of circular cross-section measuring 42 mm or more but less than 70 mm in diameter, containing by weight 0.6% or more of carbon
- 7214.99.30.40Other bars and rods of iron or non-alloy steel, of circular cross-section measuring 70 mm or more in diameter, containing by weight 0.6% or more of carbon
- 7214.99.30.90Other bars and rods of iron or non-alloy steel, containing by weight 0.6% or more of carbon
7215 Other bars and rods of iron or non-alloy steel
- 7215.10.00.00Bars and rods of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215.50.10.00Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight less than 0.25% of carbon
- 7215.50.20.00Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight 0.25% or more but less than 0.6% of carbon
- 7215.50.30.00Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight 0.6% or more of carbon
- 7215.90.00.00Other bars and rods of iron or non-alloy steel
7216 Angles, shapes and sections of iron or non-alloy steel
- 7216.10.00.10U section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.10.00.20I section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.10.00.30H section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216.21.00.00L sections of iron or non-alloy steel
- 7216.22.00.00T sections of iron or non-alloy steel
- 7216.31.00.10U section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more but not exceeding 200 mm
- 7216.31.00.20U section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of more than 200 mm but not exceeding 400 mm
- 7216.31.00.30U section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawm or extruded, of a height of more than 400 mm
- 7216.32.00.10I section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more but not exceeding 200 mm
- 7216.32.00.20I section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of more than 200 mm but not exceeding 800 mm
- 7216.32.00.30I section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of more than 800 mm
- 7216.33.00.10H section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more but not exceeding 200 mm
- 7216.33.00.20H section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of more than 200 mm but not exceeding 800 mm
- 7216.33.00.30H section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of more than 800 mm
- 7216.40.00.10L section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more
- 7216.40.00.20T section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more
- 7216.50.00.00Other angles, shapes and sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded
- 7216.61.00.00Angles, shapes and sections obtained from flat-rolled products of iron or non-alloy steel, not further worked than cold-formed or cold-finished
- 7216.69.00.00Other angles, shapes and sections of iron or non-alloy steel, not further worked than cold-formed or cold-finished
- 7216.91.00.00Angles, shapes and sections obtained from flat-rolles products of iron or non-alloy steel, cold-formed or cold-finished
- 7216.99.10.00Sheet pillings, of iron or non-alloy steel, not further worked
- 7216.99.90.00Other angles, shapes and sections of iron or non-alloy steel, not further worked
7217 Wire of iron or non-alloy steel
- 7217.10.10.00Wire of iron or non-alloy steel, not plated or coated, whether or not polished, containing by weight less than 0.25% of carbon
- 7217.10.20.00Wire of iron or non-alloy steel, not plated or coated, whether or not polished, containing by weight 0.25% or more but less than 0.6% of carbon
- 7217.10.30.00Wire of iron or non-alloy steel, not plated or coated, whether or not polished, containing by weight 0.6% or more of carbon
- 7217.20.10.00Wire of iron or non-alloy steel, plated or coated with zinc, containing by weight less than 0.25% of carbon
- 7217.20.20.00Wire of iron or non-alloy steel, plated or coated with zinc, containing by weight 0.25% or more but less than 0.6% of carbon
- 7217.20.30.00Wire of iron or non-alloy steel, plated or coated with zinc, containing by weight 0.6% or more of carbon
- 7217.30.10.00Wire of iron or non-alloy steel, plated or coated with other base metals, containing by weight less than 0.25% of carbon
- 7217.30.20.00Wire of iron or non-alloy steel, plated or coated with other base metals, containing by weight 0.25% or more but less than 0.6% of carbon
- 7217.30.30.00Wire of iron or non-alloy steel, plated or coated with other base metals, containing by weight 0.6% or more of carbon
- 7217.90.10.00Tin coated wire of iron or non-alloy steel, covered with copper
- 7217.90.20.00Other wire, of iron or non-alloy steel, plated or coated, containing by weight less than 0.25% of carbon
- 7217.90.30.00Other wire, of iron or non-alloy steel, plated or coated, containing by weight 0.25% or more but less than 0.6% of carbon
- 7217.90.40.00Other wire, of iron or non-alloy steel, plated or coated, containing by weight 0.6% or more of carbon
- 7217.90.90.00Other articles of heading 72.17
7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
- 7218.10.00.00Stainless steel in ingots or other primary forms
- 7218.91.00.10Semi-finished products of stainless steel, of sus300 series, of rectangular (other than square) cross section
- 7218.91.00.20Semi-finished products of stainless steel, of sus400 series, of rectangular (other than square) cross section
- 7218.91.00.90Other semi-finished products of stainless steel, of rectangular (other than square) cross section
- 7218.99.00.10Semi-finished products of stainless steel, of sus300 series, of square cross-section
- 7218.99.00.20Semi-finished products of stainless steel, of sus400 series, of square cross-section
- 7218.99.00.30Semi-finished products of stainless steel, of sus300 series, of circular cross-section
- 7218.99.00.40Semi-finished products of stainless steel, of sus400 series, of circular cross-section
- 7218.99.00.90Other semi-finished products of stainless steel
7219 Flat-rolled products of stainless steel, of a width of 600 mm or more
- 7219.11.10.11Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness exceeding 10 mm, under the specification of SUS 430 series
- 7219.11.10.19Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness exceeding 10 mm, under the specification of SUS 430 series
- 7219.11.10.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness exceeding 10 mm, under the specification of other SUS 400 series
- 7219.11.10.99Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness exceeding 10 mm, under the specification of other SUS 400 series
- 7219.11.90.21Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness exceeding 10 mm, under the specification of SUS 316 series
- 7219.11.90.29Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness exceeding 10 mm, under the specification of SUS 316 series
- 7219.11.90.31Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness exceeding 10 mm, under the specification of SUS 304 series
- 7219.11.90.39Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness exceeding 10 mm, under the specification of SUS 304 series
- 7219.11.90.41Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness exceeding 10 mm, under the specification of SUS 300 series
- 7219.11.90.49Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness exceeding 10 mm, under the specification of other SUS 300 series
- 7219.11.90.51Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness exceeding 10 mm, under the specification of SUS 200 series
- 7219.11.90.59Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness exceeding 10 mm, under the specification of SUS 200 series
- 7219.11.90.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness exceeding 10 mm
- 7219.11.90.99Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness exceeding 10 mm
- 7219.12.10.11Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 430 series
- 7219.12.10.19Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 430 series
- 7219.12.10.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of other SUS 400 series
- 7219.12.10.99Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of other SUS 400 series
- 7219.12.90.21Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of other SUS 400 series
- 7219.12.90.29Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 316 series
- 7219.12.90.31Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 304 series
- 7219.12.90.39Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 304 series
- 7219.12.90.41Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of other SUS 300 series
- 7219.12.90.49Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of other SUS 300 series
- 7219.12.90.51Flat-rolled products of stainless steel, hot-rolled, without annealed and pickled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 200 series
- 7219.12.90.59Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 200 series
- 7219.12.90.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.12.90.99Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13.10.11Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 430 series
- 7219.13.10.19Other flat-rolled products of stainless steel, hot-rolled, with annealed and pickled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 430 series
- 7219.13.10.91Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 400 series
- 7219.13.10.99Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 400 series
- 7219.13.90.21Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 316 series
- 7219.13.90.29Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 316 series
- 7219.13.90.31Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 304 series
- 7219.13.90.39Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 304 series
- 7219.13.90.41Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 300 series
- 7219.13.90.49Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 300 series
- 7219.13.90.51Flat-rolled products of stainless steel, hot-rolled, without annealed and pickled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 200 series
- 7219.13.90.59Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 200 series
- 7219.13.90.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of 3 mm or more but less than 4.75 mm
- 7219.13.90.99Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.10.11Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of less than 3 mm, under the specification of SUS 430 series
- 7219.14.10.19Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of less than 3 mm, under the specification of SUS 430 series
- 7219.14.10.91Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of less than 3 mm, under the specification of other SUS 400 series
- 7219.14.10.99Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of less than 3 mm, under the specification of other SUS 400 series
- 7219.14.90.21Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of less than 3 mm, under the specification of SUS 316 series
- 7219.14.90.29Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of less than 3 mm, under the specification of SUS 316 series
- 7219.14.90.31Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of less than 3 mm, under the specification of SUS 304 series
- 7219.14.90.39Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of less than 3 mm, under the specification of SUS 304 series
- 7219.14.90.41Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of less than 3 mm, under the specification of other SUS 300 series
- 7219.14.90.49Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of less than 3 mm, under the specification of other SUS 300 series
- 7219.14.90.51Flat-rolled products of stainless steel, hot-rolled, without annealed and pickled, in coils, of a thickness of less than 3 mm, under the specification of SUS 200 series
- 7219.14.90.59Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of less than 3 mm, under the specification of SUS 200 series
- 7219.14.90.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, in coils, of a thickness of less than 3 mm
- 7219.14.90.99Other flat-rolled products of stainless steel, hot-rolled, in coils, of a thickness of less than 3 mm
- 7219.21.10.11Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm, under the specification of SUS 430 series
- 7219.21.10.19Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm, under the specification of SUS 430 series
- 7219.21.10.91Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm, under the specification of other SUS 400 series
- 7219.21.10.99Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm, under the specification of other SUS 400 series
- 7219.21.90.21Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm, under the specification of SUS 316 series
- 7219.21.90.29Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm, under the specification of SUS 316 series
- 7219.21.90.31Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm, under the specification of SUS 304 series
- 7219.21.90.39Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm, under the specification of SUS 304 series
- 7219.21.90.41Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm, under the specification of other SUS 300 series
- 7219.21.90.49Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm, under the specification of other SUS 300 series
- 7219.21.90.51Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm, under the specification of SUS 200 series
- 7219.21.90.59Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm, under the specification of SUS 200 series
- 7219.21.90.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm
- 7219.21.90.99Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm
- 7219.22.10.11Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 430 series
- 7219.22.10.19Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 430 series
- 7219.22.10.91Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of other SUS 400 series
- 7219.22.10.99Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of other SUS 400 series
- 7219.22.90.21Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 316 series
- 7219.22.90.29Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 316 series
- 7219.22.90.31Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 304 series
- 7219.22.90.39Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 304 series
- 7219.22.90.41Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of other SUS 300 series
- 7219.22.90.49Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of other SUS 300 series
- 7219.22.90.51Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 200 series
- 7219.22.90.59Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm, under the specification of SUS 200 series
- 7219.22.90.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.22.90.99Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23.10.11Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 430 series
- 7219.23.10.19Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 430 series
- 7219.23.10.91Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 400 series
- 7219.23.10.99Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 400 series
- 7219.23.90.21Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 316 series
- 7219.23.90.29Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 316 series
- 7219.23.90.31Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 304 series
- 7219.23.90.39Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 304 series
- 7219.23.90.41Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 300 series
- 7219.23.90.49Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 300 series
- 7219.23.90.51Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 200 series
- 7219.23.90.59Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 200 series
- 7219.23.90.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm
- 7219.23.90.99Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.10.11Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of less than 3 mm, under the specification of SUS 430 series
- 7219.24.10.19Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of less than 3 mm, under the specification of SUS 430 series
- 7219.24.10.91Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of less than 3 mm, under the specification of other SUS 400 series
- 7219.24.10.99Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of less than 3 mm, under the specification of other SUS 400 series
- 7219.24.90.21Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of less than 3 mm, under the specification of SUS 316 series
- 7219.24.90.29Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of less than 3 mm, under the specification of SUS 316 series
- 7219.24.90.31Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of less than 3 mm, under the specification of SUS 304 series
- 7219.24.90.39Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of less than 3 mm, under the specification of SUS 304 series
- 7219.24.90.41Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of less than 3 mm, under the specification of other SUS 300 series
- 7219.24.90.49Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of less than 3 mm, under the specification of other SUS 300 series
- 7219.24.90.51Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of less than 3 mm, under the specification of SUS 200 series
- 7219.24.90.59Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of less than 3 mm, under the specification of SUS 200 series
- 7219.24.90.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness of less than 3 mm
- 7219.24.90.99Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of less than 3 mm
- 7219.31.10.10Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 4.75 mm or more under the specification of SUS 430 series
- 7219.31.10.90Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 4.75 mm or more under the specification of other SUS 400 series
- 7219.31.90.11Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 4.75 mm or more under the specification of SUS 316 series
- 7219.31.90.12Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 4.75 mm or more under the specification of SUS 304 series
- 7219.31.90.19Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 4.75 mm or more under the specification of other SUS 300 series
- 7219.31.90.20Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 4.75 mm or more, under the specification of SUS 200 series
- 7219.31.90.90Other flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 4.75 mm or more
- 7219.32.10.10Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 430 series
- 7219.32.10.90Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other sus 400 series
- 7219.32.90.11Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 316 series
- 7219.32.90.12Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 304 series
- 7219.32.90.19Flat-rolled products of stainless steel, cold rolled (cold-reduced), of a thickness of 3 mm or more but less than 4.75 mm, under the specification of other SUS 300 series
- 7219.32.90.20Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 3 mm or more but less than 4.75 mm, under the specification of SUS 200 series
- 7219.32.90.90Other flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 3 mm or more but less than 4.75 mm
- 7219.33.10.10Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm, under the specification of SUS 430 series
- 7219.33.10.90Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm, under the specification of other SUS 400 series
- 7219.33.90.11Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm, under the specification of SUS 316 series
- 7219.33.90.12Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm, under the specification of SUS 304 series
- 7219.33.90.19Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm, under the specification of other SUS 300 series
- 7219.33.90.20Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm, under the specification of SUS 200 series
- 7219.33.90.90Other flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm
- 7219.34.10.10Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm, under the specification of SUS 430 series
- 7219.34.10.90Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm, under the specification of other SUS 400 series
- 7219.34.90.11flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm, under the specification of SUS 316 series
- 7219.34.90.12Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm, under the specification of SUS 304 series
- 7219.34.90.19Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm, under the specification of other SUS 300 series
- 7219.34.90.20Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm, under the specification of SUS 200 series
- 7219.34.90.90Other flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7219.35.10.10Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of less than 0.5 mm, under the specification of SUS 430 series
- 7219.35.10.90Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of less than 0.5 mm, under the specification of other SUS 400 series
- 7219.35.90.11Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of less than 0.5 mm, under the specification of SUS 316 series
- 7219.35.90.12Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of less than 0.5 mm, under the specification of SUS 304 series
- 7219.35.90.19Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of less than 0.5 mm, under the specification of other SUS 300 series
- 7219.35.90.20Flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of less than 0.5 mm, under the specification of SUS 200 series
- 7219.35.90.90Other flat-rolled products of stainless steel, cold-rolled (cold-reduced), of a thickness of less than 0.5 mm
- 7219.90.00.10Flat-rolled products of stainless steel, clad, plated or coated with pure titanium, of a width of 600 mm or more
- 7219.90.00.90Other flat-rolled products of stainless steel, of a width of 600 mm or more
7220 Flat-rolled products of stainless steel, of a width of less than 600 mm
- 7220.11.10.11Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of SUS 430 series
- 7220.11.10.19Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of SUS 430 series
- 7220.11.10.91Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of other SUS 400 series
- 7220.11.10.99Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of other SUS 400 series
- 7220.11.90.21Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of SUS 316 series
- 7220.11.90.29Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of SUS 316 series
- 7220.11.90.31Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of SUS 304 series
- 7220.11.90.39Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of SUS 304 series
- 7220.11.90.41Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of other SUS 300 series
- 7220.11.90.49Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of other SUS 300 series
- 7220.11.90.51Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of SUS 200 series
- 7220.11.90.59Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of 4.75 mm or more, under the specification of SUS 200 series
- 7220.11.90.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of 4.75 mm or more
- 7220.11.90.99Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of 4.75 mm or more
- 7220.12.10.11Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of SUS 430 series
- 7220.12.10.19Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of SUS 430 series
- 7220.12.10.91Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of other SUS 400 series
- 7220.12.10.99Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of other SUS 400 series
- 7220.12.90.21Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of SUS 316 series
- 7220.12.90.29Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of SUS 316 series
- 7220.12.90.31Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of SUS 304 series
- 7220.12.90.39Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of SUS 304 series
- 7220.12.90.41Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of other SUS 300 series
- 7220.12.90.49Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of other SUS 300 series
- 7220.12.90.51Flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of SUS 200 series
- 7220.12.90.59Other flat-rolled products of stainless steel, hot-rolled, of a width of less than 600 mm, of a thickness of less than 4.75 mm, under the specification of SUS 200 series
- 7220.12.90.91Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, of a width of less than 600 mm, of a thickness of less than 4.75 mm
- 7220.12.90.99steel, hot-rolled, of a width of less than 600 mm, of a thickness of less than 4.75 mm
- 7220.20.10.10Flat-rolled products of stainless steel, of a width of less than 600 mm, not futher worked than cold-rolled, (cold-reduced), under the specification of SUS 430 series
- 7220.20.10.90Flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than cold-rolled, (cold-reduced) under the specification of other SUS 400 series
- 7220.20.90.11Flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), under the specification of SUS 316 series
- 7220.20.90.12Flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), under the specification of SUS 304 series
- 7220.20.90.19Flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), under the specification of other SUS 300 series
- 7220.20.90.20Flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), under the specification of SUS 200 series
- 7220.20.90.90Other flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-roduced)
- 7220.90.10.11Flat-rolled products of stainless steel, clad, plated or coated with pure titanium, of a width of less than 600 mm, under the specification of SUS 430 series
- 7220.90.10.19Flat-rolled products of other stainless steel, of a width of less than 600 mm, under the specification of SUS 430 series
- 7220.90.10.91Other flat-rolled products of stainless steel, clad, plated or coated with pure titanium, of a width of less than 600 mm, under the specification of other SUS 400 series
- 7220.90.10.99Flat-rolled products of other stainless steel, of a width of less than 600 mm, under the specification of other SUS 400 series
- 7220.90.90.13Flat-rolled products of stainless steel, clad, plated or coated with pure titanium, of a width of less than 600 mm, under the specification of SUS 316 series
- 7220.90.90.14Flat-rolled products of other stainless steel, of a width of less than 600 mm, under the specification of SUS 316 series
- 7220.90.90.15Flat-rolled products of stainless steel, clad, plated or coated with pure titanium, of a width of less than 600 mm, under the specification of SUS 304 series
- 7220.90.90.16Flat-rolled products of other stainless steel, of a width of less than 600 mm, under the specification of SUS 304 series
- 7220.90.90.18Flat-rolled products of stainless steel, clad, plated or coated with pure titanium, of a width of less than 600 mm, under the specification of other SUS 300 series
- 7220.90.90.19Flat-rolled products of other stainless steel, of a width of less than 600 mm, under the specification of other SUS 300 series
- 7220.90.90.21Flat-rolled products of stainless steel, clad, plated or coated with pure titanium, of a width of less than 600 mm, under the specification of SUS 200 series
- 7220.90.90.29Flat-rolled products of other stainless steel, of a width of less than 600 mm, under the specification of SUS 200 series
- 7220.90.90.91Other flat-rolled products of stainless steel, clad, plated or coated with pure titanium, of a width of less than 600 mm
- 7220.90.90.99Other flat-rolled products of other stainless steel, of a width of less than 600 mm
7221 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
- 7221.00.00.11Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 5.5 mm or more but less than 14 mm, under the specification of SUS 430 series
- 7221.00.00.12Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 5.5 mm or more but less than 14 mm, under the specification of SUS 410 series
- 7221.00.00.19Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 5.5 mm or more but less than 14 mm, under the specification of other SUS 400 series
- 7221.00.00.21Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 5.5 mm or more but less than 14 mm, under the specification of SUS 316 series
- 7221.00.00.22Bars and rods, hot-rolled of stainless stell, in irregularly wound coils of a diameter of 5.5 mm or more but less than 14 mm, under the specification of SUS 304 series
- 7221.00.00.29Other bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 5.5 mm or more but less than 14 mm
- 7221.00.00.31Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 14 mm or more but less than 35 mm, under the specification of SUS 430 series
- 7221.00.00.32Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 14 mm or more but less than 35 mm, under the specification of SUS 410 series
- 7221.00.00.39Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 14 mm or more but less than 35 mm, under the specification of other SUS 400 series
- 7221.00.00.41Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 14 mm or more but less than 35 mm, under the specification of SUS 316 series
- 7221.00.00.42Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 14 mm or more but less than 35 mm, under the specification of SUS 304 series
- 7221.00.00.49Other bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 14 mm or more but less than 35 mm
- 7221.00.00.51Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 35 mm or more, under the specification of SUS 430 series
- 7221.00.00.52Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 35 mm or more, under the specification of SUS 410 series
- 7221.00.00.59Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 35 mm or more, under the specification of other SUS 400 series
- 7221.00.00.61Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 35 mm or more, under the specification of SUS 316 series
- 7221.00.00.62Bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 35 mm or more, under the specification of SUS 304 series
- 7221.00.00.69Other bars and rods, hot-rolled of stainless steel, in irregularly wound coils of a diameter of 35 mm or more
7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
- 7222.11.00.11Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring less than 14 mm in diameter, under the specification of SUS 430 series
- 7222.11.00.12Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring less than 14 mm in diameter, under the specification of SUS 410 series
- 7222.11.00.19Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring less than 14 mm in diameter, under the specification of other SUS 400 series
- 7222.11.00.21Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring less than 14 mm in diameter, under the specification of SUS 316 series
- 7222.11.00.22Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring less than 14 mm in diameter, under the specification of SUS 304 series
- 7222.11.00.29Other bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn, or extruded, of circular cross-section measuring less than 14 mm in diameter
- 7222.11.00.31Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring 14 mm or more but less than 80 mm in diameter, under the specification of SUS 430 series
- 7222.11.00.32Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring 14 mm or more but less than 80 mm in diameter, under the specification of SUS 410 series
- 7222.11.00.39Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring 14 mm or more but less than 80 mm in diameter, under the specification of other SUS 400 series
- 7222.11.00.41Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring 14 mm or more but less than 80 mm in diameter, under the specification of SUS 316 series
- 7222.11.00.42Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring 14 mm or more but less than 80 mm in diameter, under the specification of SUS 304 series
- 7222.11.00.49Other bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded of circular cross-section measuring 14 mm or more but less than 80 mm in diameter
- 7222.11.00.51Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring 80 mm or more in diameter, under the specification of SUS 430 series
- 7222.11.00.52Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring 80 mm or more in diameter, under the specification of SUS 410 series
- 7222.11.00.59Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded of circular cross-section measuring 80 mm or more in diameter, under the specification of other SUS 400 series
- 7222.11.00.61Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded of circular cross-section measuring 80 mm or more in diameter, under the specification of SUS 316 series
- 7222.11.00.62Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring 80 mm or more in diameter, under the specification of SUS 304 series
- 7222.11.00.69Other bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring 80 mm or more in diameter
- 7222.19.00.11Other bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, under the specification of SUS 430 series
- 7222.19.00.12Other bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, under the specification of SUS 410 series
- 7222.19.00.19Other bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, under the specification of other SUS 400 series
- 7222.19.00.21Other bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, under the specification of SUS 316 series
- 7222.19.00.22Other bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, under the specification of SUS 304 series
- 7222.19.00.29Other bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded
- 7222.20.00.11Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring less than 14 mm in diameter, under the specification of SUS 430 series
- 7222.20.00.12Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring less than 14 mm in diameter, under the specification of SUS 410 series
- 7222.20.00.19Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring less than 14 mm in diameter, under the specification of other SUS 400 series
- 7222.20.00.21Bars and rods of stainless steel, not further worked than cold-formed or cold-finished or cold-finished of circular cross-section measuring less than 14 mm in diameter, under the specification of SUS 316 series
- 7222.20.00.22Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring less than 14 mm in diameter, under the specification of SUS 304 series
- 7222.20.00.29Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring less than 14 mm in diameter
- 7222.20.00.31Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 14 mm or more but less than 80 mm in diameter, under the specification of SUS 430 series
- 7222.20.00.32Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 14 mm or more but less than 80 mm in diameter, under the specification of SUS 410 series
- 7222.20.00.39Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 14 mm or more but less than 80 mm in diameter, under the specification of other SUS 400 series
- 7222.20.00.41Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 14 mm or more but less than 80 mm in diameter, under the specification of SUS 316 series
- 7222.20.00.42Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 14 mm or more but less than 80 mm in diameter, under the specification of SUS 304 series
- 7222.20.00.49Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 14 mm or more but less than 80 mm in diameter
- 7222.20.00.51Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 80 mm or more in diameter, under the specification of SUS 430 series
- 7222.20.00.52Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 80 mm or more in diameter, under the specification of SUS 410 series
- 7222.20.00.59Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 80 mm or more in diameter, under the specification of other SUS 400 series
- 7222.20.00.61Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 80 mm or more in diameter, under the specification of SUS 316 series
- 7222.20.00.62Bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 80 mm or more in diameter, under the specification of SUS 304 series
- 7222.20.00.69Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished of circular cross-section measuring 80 mm or more in diameter
- 7222.20.00.91Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished, under the specification of other SUS 400 series
- 7222.20.00.92Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished, under the specification of other SUS 300 series
- 7222.20.00.99Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished
- 7222.30.00.00Other bars and rods of stainless steel
- 7222.40.00.00Angles, shapes and sections of stainless steel
7223 Wire of stainless steel
- 7223.00.00.11Wire of stainless steel of SUS 400 series, of a diameter less than 0.1 mm
- 7223.00.00.12Wire of stainless steel of SUS 300 series, of a diameter less than 0.1 mm
- 7223.00.00.21Wire of stainless steel of SUS 400 series, of a diameter 0.1 mm or more but less than 0.6 mm in diameter
- 7223.00.00.22Wire of stainless steel of SUS 300 series, of a diameter 0.1mm or more but less than 0.6 mm in diameter
- 7223.00.00.31Wire of stainless steel of SUS 400 series, of a diameter 0.6 mm or more but less than 5.5 mm in diameter
- 7223.00.00.32Wire of stainless steel of SUS 300 series, of a diameter 0.6 mm or more but less than 5.5 mm in diameter
- 7223.00.00.90Other wire of stainless steel
7224 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
- 7224.10.00.10High speed steel in ingots and other primary forms
- 7224.10.00.20Alloy tool steel in ingots and other primary forms
- 7224.10.00.90Other alloy tool steel in ingots and other primary forms
- 7224.90.00.11Semi-finished products of high speed steel of rectangular (other than square) cross section
- 7224.90.00.12Semi-finished products of high speed steel of square cross-section
- 7224.90.00.21Semi-finished products of alloy tool steel of rectangular (other than square) cross-section
- 7224.90.00.22Semi-finished products of alloy tool steel of square cross-section
- 7224.90.00.91Semi-finished products of other alloy steel of rectangular (other than square) cross-section
- 7224.90.00.92Semi-finished products of other alloy steel of square cross-section
- 7224.90.00.93Other semi-finished products of other alloy steel
7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more
- 7225.11.00.00Flat-rolled products of grain-oriented silicon-electrical steel, of a width of 600 mm or more
- 7225.19.10.00Flat-rolled products of other silicon-electrical steel, of a width of 600 mm or more, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 6.5 W/kg or more
- 7225.19.20.00Flat-rolled products of silicon-electrical steel, of a width of 600 mm or more, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 5 W/kg or more but less than 6.5 W/kg
- 7225.19.30.00Flat-rolled products of other silicon-electrical steel, of a width of 600 mm or more, at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss less than 5 W/kg
- 7225.30.00.00Flat-rolled products of other alloy steel, not further worked than hot-rolled, in coils, of a width of 600 mm or more
- 7225.40.00.10Flat-rolled products of alloy tool steel, not further worked than hot-rolled, not in coils, of a width of 600 mm or more, of a thickness of 60 mm or more
- 7225.40.00.20Flat-rolled products of alloy tool steel, not further worked than hot-rolled, not in coils, of a width of 600 mm or more, of a thickness of less than 60 mm
- 7225.40.00.90Flat-rolled products of other alloy steel, not further worked than hot-rolled, not in coils, of a width of 600 mm or more
- 7225.50.00.00Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of a width of 600 mm or more
- 7225.91.00.00Flat-rolled products of other alloy steel, electrolically plated or coated with zinc, of a width of 600 mm or more
- 7225.92.00.00Flat-rolled products of other alloy steel, otherwise plated or coated with zinc, of a width of 600 mm or more
- 7225.99.10.00Flat-rolled products of other alloy steel, plated, coated or clad, of a width of 600 mm or more
- 7225.99.90.00Flat-rolled products of other alloy steel, of a width of 600 mm or more
7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm
- 7226.11.00.00Flat-rolled products of grain-oriented silicon-electrical steel, of a width of less than 600 mm
- 7226.19.10.00Flat-rolled products of other silicon-electrical steel, of a width of less than 600 mm at frequency of 50Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 6.5 w/kg or more
- 7226.19.20.00Flat-rolled products of other silicon-electrical steel, of a width of less than 600 mm at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 5 W/kg or more but less than 6.5 W/kg
- 7226.19.30.00Flat-rolled products of other silicon-electrical steel, of a width of less than 600 mm at frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss less than 5 W/kg
- 7226.20.00.10Flat-rolled products of high speed steel, of a width of less than 600 mm, of a thickness of 60 mm or more, containing by weight 3% or more of molybdenum
- 7226.20.00.20Flat-rolled products of high speed steel, of a width of less than 600 mm, of a thickness of less than 60 mm, containing by weight 3% or more of molybdenum
- 7226.20.00.30Flat-rolled products of high speed steel, of a width of less than 600 mm, of a thickness of 60 mm or more, containing by weight less than 3% molybdenum
- 7226.20.00.40Flat-rolled products of high speed steel, of a width of less than 600 mm, of a thickness of less than 60 mm, containing by weight less than 3% molybdenum
- 7226.91.00.10Flat-rolled products of alloy tool steel, not further worked than hot-rolled, of a width of less than 600 mm, of a thickness of 60 mm or more
- 7226.91.00.20Flat-rolled products of alloy tool steel, not further worked than hot-rolled, of a width of less than 600 mm, of a thickness less than 60 mm
- 7226.91.00.90Flat-rolled products of other alloy steel, not further worked than hot-rolled, of a width of less than 600 mm
- 7226.92.10.00Flat-rolled products of ferro-nickel alloy steel, containing by weight not less than 40% of nickel, not further worked than cold-rolled (cold-reduced), of a width of less than 600 mm
- 7226.92.90.00Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of a width of less than 600 mm
- 7226.99.10.00Flat-rolled products of other alloy steel, electrolytically plated or coated with zinc, of a width of less than 600 mm
- 7226.99.20.00Flat-rolled products of other alloy steel, otherwise plated or coated with zinc, of a width of less than 600 mm
- 7226.99.90.00Flat-rolled products of other alloy steel, of a width of less than 600 mm
7227 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
- 7227.10.00.00Bars and rods, hot-rolled, in irregularly wound coils, of high speed steel
- 7227.20.10.00Bars and rods, for welding electrodes, hot-rolled, in irregularly wound coils, of silico-manganese steel
- 7227.20.90.00Other bars and rods, hot-rolled, in irregularly wound coils, of silico-manganese steel
- 7227.90.00.11Bars and rods, of bearing steel (containing by weight 0.95% or more of carbon) hot-rolled, in irreqularly wound coils, of a diameter of 5.5 mm or more but less than 14 mm
- 7227.90.00.12Bars and rods, of bearing steel (containing by weight 0.95% or more of corbon) hot-rolled, in irreqularly wound coils, of a diameter of 14 mm or more but less than 35 mm
- 7227.90.00.13Bars and rods, of bearing steel (containing by weight 0.95% or more of carbon) hot-rolled, in irreqularly wound coils, of a diameter of 35 mm or more
- 7227.90.00.21Bars and rods, of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium) hot-rolled, in irreqularly wound coils, of a diameter of 5.5 mm or more but less than 14 mm
- 7227.90.00.22Bars and rods, of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium) hot-rolled, in irreqularly wound coils, of a diameter of 14 mm or more but less than 35 mm
- 7227.90.00.23Bars and rods, of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium) hot-rolled, in irreqularly wound coils, of a diameter of 35 mm or more
- 7227.90.00.90Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
- 7228.10.00.11Bars and rods of high speed steel, not further worked than hot-rolled, hot-drawn, or extruded, of a diameter less than 14 mm, containing by weight 3% or more of molybdenum
- 7228.10.00.12Bars and rods of high speed steel, not futher worked than hor-rolled, hot-drawn, or extruded, of a diameter 14 mm or more but less than 160 mm, containing by weight 3% or more of molybdenum
- 7228.10.00.13Bars and rods of high speed steel, not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 160 mm or more, containing by weight 3% or more of molybdenum
- 7228.10.00.21Bars and rods of high speed steel, not further worked than hot-rolled, hot-drawn, or extruded, of a diameter less than 14 mm, containing by weight less than 3% of molybdenum
- 7228.10.00.22Bars and rods of high speed steel, not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 14 mm or more but less than 160 mm, containing by weight less than 3% of molybdenum
- 7228.10.00.23Bars and rods of high speed steel, not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 160 mm or more, containing by weight less than 3% of molybdenum
- 7228.10.00.31Bars and rods of high speed steel, not further worked than cold-formed, cold-finished of a diameter less than 14 mm, containing by weight 3% or more of molybdenum
- 7228.10.00.32Bars and rods of high speed steel, not further worked than cold-formed, cold-finished of a diameter 14 mm or more but less than 160 mm, containing by weight 3% or more of molybenum
- 7228.10.00.33Bars and rods of high speed steel, not further worked than cold-formed, cold-finished of a diameter 160 mm or more, containing by weight 3% or more of molybdenum
- 7228.10.00.41Bars and rods of high speed steel, not further worked than cold-formed, cold-finished of a diameter less than 14 mm, containing by weight less than 3% of molybdenum
- 7228.10.00.42Bars and rods of high speed steel, not further worked than cold-formed, cold-finished of a diameter 14 mm or more but less than 160 mm, containing by weight less than 3% of molybdenum
- 7228.10.00.43Bars and rods of high speed steel, not further worked than cold-formed, cold-finished of a diameter 160 mm or more, containing by weight less than 3% of molybdenum
- 7228.10.00.90Other bars and rods of high speed steel
- 7228.20.10.00Other bars and rods, for welding electrodes, silico-manganese steel
- 7228.20.90.00Other bars and rods, of silico-manganese steel
- 7228.30.00.11Bars and rods of alloy tool steel, not further worked than hot-rolled, hot-drawn, or extruded of a diameter less than 14 mm
- 7228.30.00.12Bars and rods of alloy tool steel, not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 14 mm or more but less than 35 mm
- 7228.30.00.13Bars and rods of alloy tool steel, not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 35 mm or more but less than 100 mm
- 7228.30.00.14Bars and rods of alloy tool steel, not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 100 mm or more
- 7228.30.00.21Bars and rods of bearing steel (containing by weight 0.95% or more of corbon), not further worked than hot-rolled, hot-drawn, or extruded, of a diameter less than 14 mm
- 7228.30.00.22Bars and rods of bearing steel (containing by weight 0.95% or more of carbon), not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 14 mm or more but less than 35 mm
- 7228.30.00.23Bars and rods of bearing steel (containing by weight 0.95% or more of carbon), not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 35 mm or more but less than 100 mm
- 7228.30.00.24Bars and rods of bearing steel (containing by weight 0.95% or more of carbon), not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 100 mm or more
- 7228.30.00.31Bars and rods of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium), not further worked than hot-rolled, hot-drawn, or extruded, of a diameter less than 14 mm
- 7228.30.00.32Bars and rods of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium), not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 14 mm or more but less than 35 mm
- 7228.30.00.33Bars and rods of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium), not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 35 mm or more but less than 100 mm
- 7228.30.00.34Bars and rods of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium), not further worked than hot-rolled, hot-drawn, or extruded of a diameter 100 mm or more
- 7228.30.00.90Bars and rods of other alloy steel, not further worked than hot-rolled, hot-drawn, or extruded
- 7228.40.00.11Bars and rods of alloy tool steel, not further worked than forged, of a diameter less than 200 mm
- 7228.40.00.12Bars and rods of alloy tool steel, not further worked than forged, of a diameter 200 mm or more
- 7228.40.00.91Bars and rods of other alloy tool steel, not further worked than forged, of a diameter less than 200 mm
- 7228.40.00.92Bars and rods of other alloy tool steel, not further worked than forged, of a diameter 200 mm or more
- 7228.40.00.99Bars and rods of other alloy steel, not further worked than forged
- 7228.50.00.11Bars and rods of alloy tool steel, not further worked than cold-formed or cold-finished, of a diameter less than 14 mm
- 7228.50.00.12Bars and rods of alloy tool steel, not further worked than cold-formed or cold-finished, of a diameter 14 mm or more but less than 35 mm
- 7228.50.00.13Bars and rods of alloy tool steel, not further worked than cold-formed or cold-finished, of a diameter 35 mm or more but less than 100 mm
- 7228.50.00.14Bars and rods of alloy tool steel, not further worked than cold-formed or cold-formed or cold-finished, of a diameter 100 or more
- 7228.50.00.21Bars and rods of bearing steel (containing by weight 0.95% or more of carbon), not further worked than cold-formed or cold-finished, of a diameter less than 14 mm
- 7228.50.00.22Bars and rods of bearing steel (containing by weight 0.95% or more of carbon), not further worked than cold-formed or cold-finished, of a diameter 14 mm or more but less than 35 mm
- 7228.50.00.23Bars and rods of bearing steel (containing by weight 0.95% or more of carbon), not further worked than cold-formed or cold-finished, of a diameter 35 mm or more but less than 100 mm
- 7228.50.00.24Bars and rods of alloy tool steel (containing by weight 0.95% or more of carbon), not further worked than cold-formed or cold-finished, of a diameter 100 mm or more
- 7228.50.00.31Bars and rods of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium), not further worked than cold-formed or cold-finished, of a diameter less than 14 mm
- 7228.50.00.32Bars and rods of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium), not further worked than cold-formed or cold-finished, of a diameter 14 mm or more but less than 35 mm
- 7228.50.00.33Bars and rods of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium), not further worked than cold-formed or cold-finished, of a diameter 35 mm or more but less than 100 mm
- 7228.50.00.34Bars and rods of alloy spring steel (containing by weight 0.45% or more but less than 0.66% of carbon and 0.65% or more but less than 10.5% of chromium), not further worked than cold-formed or cold-finished, of a diameter 100 mm or more
- 7228.50.00.90Bars and rods of other alloy steel, not further worked than cold-formed or cold-finished
- 7228.60.00.00Other bars and rods, of alloy steel
- 7228.70.00.00Other angles, shapes and sections, of alloy steel
- 7228.80.10.00Hollow drill bars and rods, of alloy steel
- 7228.80.20.00Hollow drill bars and rods, of non-alloy steel