Customs Import Tariff of Taiwan · CCC code · HS 7202.99
7202.99.90.00: Other ferro-alloys
✓ Can be used in a customs declaration Data: Customs Import Tariff of Taiwan, in force from 24 April 2025 · checked on 24 October 2026
What you pay
Importing into Taiwan
Customs duty only: import VAT, other taxes and trade defence duties of this country are not covered here, and the duty calculator works only with the EU, Türkiye, US and UK tariffs.
Same subheading in other tariffs
7202.99 Ferro-alloys, other, other
UK Free Third-country duty 4 tariff lines 
EU Free – 2.7% Third-country duty 3 tariff lines · average 1.8% 
Türkiye Free – 2.7% Third-country duty 4 tariff lines · average 1.4% 
USA 4.2% – 5% General (MFN) 3 tariff lines · average 4.7% 
Canada Free General (MFN) 1 tariff line 
Mexico 35% General (MFN) 4 tariff lines 
Brazil 5.4% General (MFN) 2 tariff lines 
Argentina 5.4% General (MFN) 4 tariff lines 
Peru Free General (MFN) 1 tariff line 
New Zealand Free General (MFN) 1 tariff line 
Japan 2.5% General (MFN) 2 tariff lines 
GCC 5% General (MFN) 1 tariff line 
Switzerland Free General (MFN) 1 tariff line 
Norway Free General (MFN) 1 tariff line 
North Macedonia 2% General (MFN) 3 tariff lines 
Nigeria 5% General (MFN) 1 tariff line Taiwan lines: 7202.99
Binding rulings for similar goods
Decisions of U.S. Customs and Border Protection (CROSS) and HMRC (Advance Tariff Rulings) on goods classified here. A ruling binds only its holder, but shows how the authorities classify similar goods. The descriptions are the authorities’ own, in English.
- N324651 U.S. CBP
The tariff classification of ferrosilicon zirconium from China
- 600013534 HMRC
Silicon Iron Chrome anodes The silicon iron anodes act as the positive electrode, while the buried or submersed structure being protected (e.g., pipelines, tanks, or marine structures) serves as the negative electrode. The anodes will consume over time whereas the structure will remain intact. The…
Legal notes
Subheading notes
1. In this chapter, the following expressions have the meanings hereby assigned to them:
(a) Alloy pig iron
Pig iron containing, by weight, one or more of the following elements in the specified proportions:
more than 0,2 % of chromium,
more than 0,3 % of copper,
more than 0,3 % of nickel,
more than 0,1 % of any of the following elements: aluminium, molybdenum, titanium, tungsten (wolfram), vanadium.
(b) Non-alloy free-cutting steel
Non-alloy steel containing, by weight, one or more of the following elements in the specified proportions:
0,08 % or more of sulphur,
0,1 % or more of lead,
more than 0,05 % of selenium,
more than 0,01 % of tellurium,
more than 0,05 % of bismuth.
(c) Silicon-electrical steel
Alloy steels containing by weight at least 0,6 % but not more than 6 % of silicon and not more than 0,08 % of carbon. They may also contain by weight not more than 1 % of aluminium but no other element in a proportion that would give the steel the characteristics of another alloy steel.
(d) High-speed steel
Alloy steels containing, with or without other elements, at least two of the three elements molybdenum, tungsten and vanadium with a combined content by weight of 7 % or more, 0,6 % or more of carbon and 3 to 6 % of chromium.
(e) Silico-manganese steel
Alloy steels containing by weight:
not more than 0,7 % of carbon,
0,5 % or more but not more than 1,9 % of manganese, and
0,6 % or more but not more than 2,3 % of silicon, but no other element in a proportion that would give the steel the characteristics of another alloy steel.
2. For the classification of ferro-alloys in the subheadings of heading 7202, the following rule should be observed:
A ferro-alloy is considered as binary and classified under the relevant subheading (if it exists) if only one of the alloy elements exceeds the minimum percentage laid down in note 1(c) to this chapter; by analogy, it is considered respectively as ternary or quaternary if two or three alloy elements exceed the minimum percentage.
For the application of this rule, the unspecified ‘other elements’ referred to in note 1(c) to this chapter must each exceed 10 % by weight.
In the Customs Import Tariff of Taiwan, 7202.99.90.00 is one of 2 lines under subheading 7202.99, ferro-alloys, other, other.
The column 1 rate is free, and quantities are declared in TNE.
For the same subheading, the UK duty is free, the EU duty is 0%–2.7%, the Türkiye duty is 0%–2.7%, the US duty is 4.2%–5%, the Canada duty is free, the Mexico duty is 35%, the Brazil duty is 5.4%, the Argentina duty is 5.4%, the Peru duty is free, the New Zealand duty is free, the Japan duty is 2.5%, the GCC duty is 5%, the Switzerland duty is free, the Norway duty is free, the North Macedonia duty is 2% and the Nigeria duty is 5%.
Taiwan imported goods of subheading 7202.99 worth US$6m in 2024; the largest supplier was China.
Questions and answers
What is the Taiwan import duty for CCC code 7202.99.90.00?
The column 1 rate in the Customs Import Tariff of Taiwan is free; the supplementary unit is TNE. This page shows the rate as published by the national source and, where the source publishes them, preferential rates: choose the country of origin to see them. Trade defence duties and VAT are not covered.
Where does Taiwan import these goods from?
For subheading 7202.99 as a whole, the largest supplier in 2024 was China (US$4m), followed by South Korea.
Typical products
Everyday names, not part of the legal text.