UK Global Tariff · commodity code · HS 7210.49
7210 49 00 80: Galvanised steel sheet and coil: Not further worked than surface-treated or simply cut into: other
Galvanised steel sheet and coil
✓ Can be used in a customs declaration Data: UK Global Tariff · checked on 24 October 2026
- 7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
- Otherwise plated or coated with zinc
- 7210 49 00 00 Other
- Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210 49 00 80 Other
What you pay
Importing into UK
Additional duties and import rules
Charges on top of the customs duty, and rules the goods must meet at the border.
Additional duties and charges 2
- Additional dutyAdditional duties 35%
- Applies to goods from
- Belarus, Russia
- Legal act
- 2022 No. 376
- Documents
- 9008
- Tariff quotaNon preferential tariff quota Free
- Applies to goods from
- Afghanistan, Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica and 232 more
- Legal act
- S.I. 2020/1432
Import requirements 3
- Prohibition or restrictionImport prohibition
- Applies to goods from
- North Korea
- Legal act
- S.I. 2019/411
- Import controlRestriction on entry into free circulation
- Applies to goods from
- Belarus, Russia, Syria, Ukraine
- Legal act
- 2022 No. 748, S.I. 2019/855, S.I. 2019/792, S.I. 2022/395
- Documents
- 9024
- 9011
- 9022
- 9038
- 9063
- 9009
- 9010
- 9017
- Import controlImport control on restricted goods and technologies
- Applies to goods from
- Iran, Libya, North Korea, Russia
- Legal act
- S.I. 2019/461, S.I. 2019/411, 2020 No. 1665, S.I. 2019/855
- Documents
- Y966 Goods other than those described in the MG footnotes linked to the measure (Missile Technology Control Regime list - Annex III of Reg. (EU) 267/2012)
- Y959 Goods other than those described in Annex V (Coal, iron and iron ore) of Reg. (EU) 2017/1509
- Y920 Goods other than those described in the footnotes linked to the measure
Preferential rates by country
| Agreement or scheme | Countries | Rate |
|---|---|---|
| standard rate (no agreement) | — | 50% |
| UK–Ukraine agreement | Ukraine | Free |
Footnotes
TN057 The Russia (Sanctions) (EU Exit) Regulations 2019 impose trade restrictions on certain goo…
TN701 According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9), as retained in UK La…
The prohibition shall not apply in respect of:
(a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established.
(b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014, as retained in UK Law, or in accordance with the EU-Ukraine Association Agreement
TN702 According to the Council Regulation (EU) No 1351/2014 (OJ L365, p. 46), the export of good…
(a) to any natural or legal person, entity or body in Crimea or Sevastopol, or
(b) for use in Crimea or Sevastopol.
The prohibitions shall be without prejudice to the execution until 21 March 2015 of an obligation arising from a contract concluded before 20 December 2014, or by ancillary contracts necessary for the execution of such contracts, provided that the competent authority has been informed at least five working days in advance.
When related to the use in Crimea or Sevastopol, the prohibitions do not apply where there are no reasonable grounds to determine that the goods and technology or the services are to be used in Crimea or Sevastopol.
UK: imports by month · HS 7210.49
Main suppliers, last 12 months
| Country | Value | Share | Change |
|---|---|---|---|
 Taiwan | £86.7m | 16.6% | +129% |
 France | £85.6m | 16.4% | +16.3% |
 Türkiye | £77.8m | 14.9% | +14,585.4% |
 India | £58.8m | 11.2% | +114.2% |
 Belgium | £47.2m | 9% | -6.6% |
 Germany | £42.7m | 8.2% | +3.9% |
 Netherlands | £39m | 7.5% | -22.5% |
 South Korea | £38.1m | 7.3% | -53.5% |
Same subheading in other tariffs
7210.49 Otherwise plated or coated with zinc: other
EU Free Third-country duty 1 tariff line Türkiye Free – 20% Third-country duty 4 tariff lines · average 10% 
USA Free General (MFN) 1 tariff line 
Canada Free Third-country duty 4 tariff lines 
Mexico 35% Third-country duty 3 tariff lines 
Brazil 10.8% – 25% Third-country duty 2 tariff lines · average 17.9% 
Argentina 10.8% Third-country duty 38 tariff lines 
Peru Free Third-country duty 1 tariff line 
New Zealand 5% Third-country duty 124 tariff lines 
Japan Free Third-country duty 4 tariff lines Taiwan Free Third-country duty 13 tariff lines 
GCC 5% Third-country duty 1 tariff line 
Switzerland Free Third-country duty 1 tariff line 
Norway Free Third-country duty 1 tariff line 
North Macedonia Free Third-country duty 1 tariff line 
Nigeria 5% – 20% Third-country duty 2 tariff lines · average 12.5% UK lines: 7210.49
- 7210 49 00 20Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 49 00 30Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- 7210 49 00 80Not further worked than surface-treated or simply cut into: other
- 7210 49 00 90Otherwise plated or coated with zinc: other, other
Binding rulings for similar goods
Decisions of U.S. Customs and Border Protection (CROSS) and HMRC (Advance Tariff Rulings) on goods classified here. A ruling binds only its holder, but shows how the authorities classify similar goods. The descriptions are the authorities’ own, in English.
- N341692 U.S. CBP
The tariff classification of nonalloy steel coils from Taiwan
- N341698 U.S. CBP
The tariff classification of nonalloy steel coils from Taiwan
- N341468 U.S. CBP
The tariff classification of nonalloy steel coils from Mexico
- N341469 U.S. CBP
The tariff classification of nonalloy steel coils from Vietnam
- 600015303 HMRC
A flat-rolled non-alloyed steel strip coated on both sides with a zinc-magnesium-aluminium alloy layer by continuous hot-dip coating that complies with the BS EN10346 +Zinc-Magnesium products. The coated strip is cooled, chemically passivated, optionally oiled, and wound into coils. The coating…
24 rulings in total for this code
Legal notes
Additional note
1. The following expressions have the meanings hereby assigned to them:
‘Electrical’: for the purposes of subheadings 72091610, 72091710, 72091810, 72092610, 72092710, 72092810 and 72112320, flat-rolled products which under a current at 50 Hz and a magnetic flux of 1 T have a watt-loss per kilogram, calculated by the Epstein method, of:
2,1 W or less, when their thickness does not exceed 0,20 mm,
3,6 W or less, when their thickness is not less than 0,20 mm but less than 0,60 mm,
6 W or less, when their thickness is not less than 0,60 mm but not greater than 1,50 mm.
‘Tinplate’: for the purposes of subheadings 72101220, 72107010, 72121010 and 72124020, flat-rolled products (of a thickness of less than 0,5 mm) coated with a layer of metal containing, by weight, 97 % or more of tin.
‘Tool steel’: for the purposes of subheadings 72241010, 72249002, 72253010, 72254012, 72269120, 72283020, 72284010, 72285020 and 72286020, alloy steels, other than stainless or high-speed steel, containing, by weight, one of the following compositions, with or without other elements:
less than 0,6 % of carbon
and
0,7 % or more of silicon and 0,05 % or more of vanadium
or
4 % or more of tungsten,
0,8 % or more of carbon
and
0,05 % or more of vanadium,
more than 1,2 % of carbon
and
not less than 11 % but not more than 15 % of chromium,
0,16 % or more but not more than 0,5 % of carbon
and
3,8 % or more but not more than 4,3 % of nickel
and
1,1 % or more but not more than 1,5 % of chromium
and
0,15 % or more but not more than 0,5 % of molybdenum,
0,3 % or more but not more than 0,5 % of carbon
and
1,4 % or more but not more than 2,1 % of chromium
and
0,15 % or more but not more than 0,5 % of molybdenum
and
less than 1,2 % of nickel,
0,3 % or more of carbon
and
less than 5,2 % of chromium
and
0,65 % or more of molybdenum or 0,4 % or more of tungsten,
0,5 % or more but not more than 0,6 % of carbon
and
1,25 % or more but not more than 1,8 % of nickel
and
0,5 % or more but not more than 1,2 % of chromium
and
0,15 % or more but not more than 0,5 % of molybdenum.
Commodity code 7210 49 00 80 is a line of the UK Global Tariff under HS subheading 7210.49 (otherwise plated or coated with zinc: other).
The third-country duty is 50%.
1 country pays no duty in the UK thanks to trade agreements and preference schemes such as the UK–Ukraine agreement, against a standard rate of 50%.
In the UK, additional duty of 35% applies on top of the customs duty to goods from Belarus and Russia.
Imports of galvanised steel sheet and coil (HS 7210.49) into the UK came to £523.2m between September 2025 and August 2026 (up 12% on the year before); Taiwan supplied 17%, followed by France.
For the same subheading, the EU duty is free, the Türkiye duty is 0%–20%, the US duty is free, the Canada duty is free, the Mexico duty is 35%, the Brazil duty is 10.8%–25%, the Argentina duty is 10.8%, the Peru duty is free, the New Zealand duty is 5%, the Japan duty is free, the Taiwan duty is free, the GCC duty is 5%, the Switzerland duty is free, the Norway duty is free, the North Macedonia duty is free and the Nigeria duty is 5%–20%.
The UK imported goods of subheading 7210.49 worth US$696m in 2024; the largest supplier was Vietnam.
Questions and answers
What is the UK import duty for commodity code 7210 49 00 80?
The third-country duty in the UK Global Tariff is 50%. Preferential rates for goods from agreement countries, anti-dumping duties and VAT are not included.
Which countries get a lower rate on 7210 49 00 80?
1 country has a preferential rate on this line, 1 of them at 0%, under the UK–Ukraine agreement and other arrangements. The rate applies only to goods that meet the rules of origin of the agreement, with proof of origin. Choose the country of origin on this page to see its rate.
Do anti-dumping or other extra duties apply to 7210 49 00 80?
Additional duty of 35% on goods from Belarus and Russia. These are charged on top of the customs duty.
Where does the UK import these goods from?
For subheading 7210.49 as a whole, the largest supplier in 2024 was Vietnam (US$150m), followed by India.