Argentine Tariff (NCM-SIM) · NCM-SIM code · HS 7210.49
7210.49.10.490: Galvanised steel sheet and coil: De espesor superior o igual a 0,66 mm pero inferior a 1,20: los demás
Galvanised steel sheet and coil
✓ Can be used in a customs declaration Data: Argentine Tariff (NCM-SIM), in force from 24 October 2026 · checked on 24 October 2026
This line has no official text in this language; it is shown in the language of its tariff.
- 7210 PRODUCTOS LAMINADOS PLANOS DE HIERRO O ACERO SIN ALEAR, DE ANCHURA SUPERIOR O IGUAL A 600 mm, CHAPADOS O REVESTIDOS.
- 72104 Cincados de otro modo:
- 7210.49 Los demás
- 7210.49.10 De espesor inferior a 4,75 mm
- 7210.49.10.4 De espesor superior o igual a 0,66 mm pero inferior a 1,20 mm
- 7210.49.10.490 Los demás
What you pay
Importing into Argentina
Customs duty only: import VAT, other taxes and trade defence duties of this country are not covered here, and the duty calculator works only with the EU, Türkiye, US and UK tariffs.
Same subheading in other tariffs
7210.49 Otherwise plated or coated with zinc: other
Argentina lines: 7210.49
- 7210.49.10.110De espesor superior o igual a 0,30 mm
- 7210.49.10.190De espesor inferior a 0,37 mm: los demás
- 7210.49.10.211De diámetro del agujero inferior o igual a 10 mm
- 7210.49.10.212De diámetro del agujero superior a 10 mm pero inferior o igual a 30 mm
- 7210.49.10.219Perforados con agujeros redondos según norma ISO 10630: los demás
- 7210.49.10.221De lado del agujero inferior o igual a 10 mm
- 7210.49.10.222De lado del agujero superior a 10 mm pero inferior o igual a 30 mm
- 7210.49.10.229Perforados con agujeros cuadrados según norma ISO 10630: los demás
- 7210.49.10.290De espesor superior o igual a 0,37 mm pero inferior a 0,51: los demás
- 7210.49.10.311De diámetro del agujero inferior o igual a 10 mm
- 7210.49.10.312De diámetro del agujero superior a 10 mm pero inferior o igual a 30 mm
- 7210.49.10.319Perforados con agujeros redondos según norma ISO 10630: los demás
- 7210.49.10.321De lado del agujero inferior o igual a 10 mm
- 7210.49.10.322De lado del agujero superior a 10 mm pero inferior o igual a 30 mm
- 7210.49.10.329Perforados con agujeros cuadrados según norma ISO 10630: los demás
- 7210.49.10.390De espesor superior o igual a 0,51 mm pero inferior a 0,66: los demás
- 7210.49.10.411De diámetro del agujero inferior o igual a 10 mm
- 7210.49.10.412De diámetro del agujero superior a 10 mm pero inferior o igual a 30 mm
- 7210.49.10.419Perforados con agujeros redondos según norma ISO 10630: los demás
- 7210.49.10.421De lado del agujero inferior o igual a 10 mm
- 7210.49.10.422De lado del agujero superior a 10 mm pero inferior o igual a 30 mm
- 7210.49.10.429Perforados con agujeros cuadrados según norma ISO 10630: los demás
- 7210.49.10.490De espesor superior o igual a 0,66 mm pero inferior a 1,20: los demás
- 7210.49.10.511De diámetro del agujero inferior o igual a 10 mm
- 7210.49.10.512De diámetro del agujero superior a 10 mm pero inferior o igual a 30 mm
- 7210.49.10.519Perforados con agujeros redondos según norma ISO 10630: los demás
- 7210.49.10.521De lado del agujero inferior o igual a 10 mm
- 7210.49.10.522De lado del agujero superior a 10 mm pero inferior o igual a 30 mm
- 7210.49.10.529Perforados con agujeros cuadrados según norma ISO 10630: los demás
- 7210.49.10.590De espesor superior o igual a 1,20 mm pero inferior a 1,81: los demás
- 7210.49.10.911De diámetro del agujero inferior o igual a 10 mm
- 7210.49.10.912De diámetro del agujero superior a 10 mm pero inferior o igual a 30 mm
- 7210.49.10.919Perforados con agujeros redondos según norma ISO 10630: los demás
- 7210.49.10.921De lado del agujero inferior o igual a 10 mm
- 7210.49.10.922De lado del agujero superior a 10 mm pero inferior o igual a 30 mm
- 7210.49.10.929Perforados con agujeros cuadrados según norma ISO 10630: los demás
- 7210.49.10.990De espesor inferior a 4,75 mm: los demás
- 7210.49.90.000Cincados de otro modo: los demás
Binding rulings for similar goods
Decisions of U.S. Customs and Border Protection (CROSS) and HMRC (Advance Tariff Rulings) on goods classified here. A ruling binds only its holder, but shows how the authorities classify similar goods. The descriptions are the authorities’ own, in English.
- N341692 U.S. CBP
The tariff classification of nonalloy steel coils from Taiwan
- N341698 U.S. CBP
The tariff classification of nonalloy steel coils from Taiwan
- N341468 U.S. CBP
The tariff classification of nonalloy steel coils from Mexico
- N341469 U.S. CBP
The tariff classification of nonalloy steel coils from Vietnam
- 600015303 HMRC
A flat-rolled non-alloyed steel strip coated on both sides with a zinc-magnesium-aluminium alloy layer by continuous hot-dip coating that complies with the BS EN10346 +Zinc-Magnesium products. The coated strip is cooled, chemically passivated, optionally oiled, and wound into coils. The coating…
24 rulings in total for this code
Legal notes
Additional note
1. The following expressions have the meanings hereby assigned to them:
‘Electrical’: for the purposes of subheadings 72091610, 72091710, 72091810, 72092610, 72092710, 72092810 and 72112320, flat-rolled products which under a current at 50 Hz and a magnetic flux of 1 T have a watt-loss per kilogram, calculated by the Epstein method, of:
2,1 W or less, when their thickness does not exceed 0,20 mm,
3,6 W or less, when their thickness is not less than 0,20 mm but less than 0,60 mm,
6 W or less, when their thickness is not less than 0,60 mm but not greater than 1,50 mm.
‘Tinplate’: for the purposes of subheadings 72101220, 72107010, 72121010 and 72124020, flat-rolled products (of a thickness of less than 0,5 mm) coated with a layer of metal containing, by weight, 97 % or more of tin.
‘Tool steel’: for the purposes of subheadings 72241010, 72249002, 72253010, 72254012, 72269120, 72283020, 72284010, 72285020 and 72286020, alloy steels, other than stainless or high-speed steel, containing, by weight, one of the following compositions, with or without other elements:
less than 0,6 % of carbon
and
0,7 % or more of silicon and 0,05 % or more of vanadium
or
4 % or more of tungsten,
0,8 % or more of carbon
and
0,05 % or more of vanadium,
more than 1,2 % of carbon
and
not less than 11 % but not more than 15 % of chromium,
0,16 % or more but not more than 0,5 % of carbon
and
3,8 % or more but not more than 4,3 % of nickel
and
1,1 % or more but not more than 1,5 % of chromium
and
0,15 % or more but not more than 0,5 % of molybdenum,
0,3 % or more but not more than 0,5 % of carbon
and
1,4 % or more but not more than 2,1 % of chromium
and
0,15 % or more but not more than 0,5 % of molybdenum
and
less than 1,2 % of nickel,
0,3 % or more of carbon
and
less than 5,2 % of chromium
and
0,65 % or more of molybdenum or 0,4 % or more of tungsten,
0,5 % or more but not more than 0,6 % of carbon
and
1,25 % or more but not more than 1,8 % of nickel
and
0,5 % or more but not more than 1,2 % of chromium
and
0,15 % or more but not more than 0,5 % of molybdenum.
NCM-SIM code 7210.49.10.490 is a line of the Argentine Tariff (NCM-SIM) under HS subheading 7210.49 (otherwise plated or coated with zinc: other).
The extra-zone duty (AEC) is 10.8%, and quantities are declared in KILOGRAMO.
For the same subheading, the UK duty is 50%, the EU duty is free, the Türkiye duty is 0%–20%, the US duty is free, the Canada duty is free, the Mexico duty is 35%, the Brazil duty is 10.8%–25%, the Peru duty is free, the New Zealand duty is 5%, the Japan duty is free, the Taiwan duty is free, the GCC duty is 5%, the Switzerland duty is free, the Norway duty is free, the North Macedonia duty is free and the Nigeria duty is 5%–20%.
Argentina imported goods of subheading 7210.49 worth US$168m in 2024; the largest supplier was Brazil.
Questions and answers
What is the Argentina import duty for NCM-SIM code 7210.49.10.490?
The extra-zone duty (AEC) in the Argentine Tariff (NCM-SIM) is 10.8%; the supplementary unit is KILOGRAMO. This page shows the rate as published by the national source and, where the source publishes them, preferential rates: choose the country of origin to see them. Trade defence duties and VAT are not covered.
Where does Argentina import these goods from?
For subheading 7210.49 as a whole, the largest supplier in 2024 was Brazil (US$166m), followed by the United States.