Mexican Tariff (TIGIE) · tariff fraction · HS 7224.90

7224.90.99.02

7224.90.99.02: Other alloy steel semi-finished products: De acero grado herramienta.

Other alloy steel semi-finished products

✓ Can be used in a customs declaration Data: Mexican Tariff (TIGIE), in force from 14 October 2026 · checked on 24 October 2026

This line has no official text in this language; it is shown in the language of its tariff.

  1. 7224 Los demás aceros aleados en lingotes o demás formas primarias; productos intermedios de los demás aceros aleados.
  2. 7224.90 Los demás.
  3. 7224.90.99 Los demás.
  4. 7224.90.99.02 De acero grado herramienta.

What you pay

Importing into Mexico

Customs duty Free standard rate depends on the country of origin

Customs duty only: import VAT, other taxes and trade defence duties of this country are not covered here, and the duty calculator works only with the EU, Türkiye, US and UK tariffs.

Same subheading in other tariffs

7224.90 Other alloy steel in ingots or other primary forms: other

UK Free Third-country duty 11 tariff lines EU Free Third-country duty 9 tariff lines Türkiye Free – 14% Third-country duty 10 tariff lines · average 7% USA Free General (MFN) 1 tariff line Canada Free General (MFN) 1 tariff line Brazil 7.2% General (MFN) 1 tariff line Argentina 7.2% General (MFN) 6 tariff lines Peru Free General (MFN) 1 tariff line New Zealand Free General (MFN) 1 tariff line Japan Free General (MFN) 3 tariff lines Taiwan Free General (MFN) 7 tariff lines GCC 5% General (MFN) 1 tariff line Switzerland Free General (MFN) 1 tariff line Norway Free General (MFN) 2 tariff lines North Macedonia Free General (MFN) 9 tariff lines Nigeria 5% General (MFN) 1 tariff line

Mexico lines: 7224.90

Binding rulings for similar goods

Decisions of U.S. Customs and Border Protection (CROSS) and HMRC (Advance Tariff Rulings) on goods classified here. A ruling binds only its holder, but shows how the authorities classify similar goods. The descriptions are the authorities’ own, in English.

  • N304361 U.S. CBP 14 June 2019 · 7224.90.00.45

    The tariff classification of steel products from the United Kingdom

  • 600016030 HMRC 26 August 2026 – 25 August 2029 · 7224 90 07 00

    Alloy steel bar, semi-finished with square cross section and rounded corners, produced by continuously casting into oscillating moulds to produce blooms and allowed to solidify, the steel is then subject to forging. During forging, the steel is heated above 1,175°C, fully converting its…

  • 600014944 HMRC 23 April 2026 – 22 April 2029 · 7224 90 07 00

    A semi-finished round cornered square steel bar with a cross-section throughout its length. Sizes ranging from 95mm square up to 250.7mm square The main molten steel production methods include: Melting raw materials using either an Electric Arc Furnace or Basic Oxygen Furnace Ladle Furnace…

  • 600009270 HMRC 3 January 2024 – 2 January 2027 · 7224 90 38 00

    Circular Section Other Alloy Steel Semi-finished Bars Steels purchased by this company that are produced from re-melted scrap primarily, although some steel mills do make small pig iron additions if required. The primary molten steel production routes methods are: 1. Electric Arc Furnace, or Basic…

Legal notes

Additional note

1. The following expressions have the meanings hereby assigned to them:

  • ‘Electrical’: for the purposes of subheadings 72091610, 72091710, 72091810, 72092610, 72092710, 72092810 and 72112320, flat-rolled products which under a current at 50 Hz and a magnetic flux of 1 T have a watt-loss per kilogram, calculated by the Epstein method, of:

    • 2,1 W or less, when their thickness does not exceed 0,20 mm,

    • 3,6 W or less, when their thickness is not less than 0,20 mm but less than 0,60 mm,

    • 6 W or less, when their thickness is not less than 0,60 mm but not greater than 1,50 mm.

  • ‘Tinplate’: for the purposes of subheadings 72101220, 72107010, 72121010 and 72124020, flat-rolled products (of a thickness of less than 0,5 mm) coated with a layer of metal containing, by weight, 97 % or more of tin.

  • ‘Tool steel’: for the purposes of subheadings 72241010, 72249002, 72253010, 72254012, 72269120, 72283020, 72284010, 72285020 and 72286020, alloy steels, other than stainless or high-speed steel, containing, by weight, one of the following compositions, with or without other elements:

    • less than 0,6 % of carbon

      and

      0,7 % or more of silicon and 0,05 % or more of vanadium

      or

      4 % or more of tungsten,

    • 0,8 % or more of carbon

      and

      0,05 % or more of vanadium,

    • more than 1,2 % of carbon

      and

      not less than 11 % but not more than 15 % of chromium,

    • 0,16 % or more but not more than 0,5 % of carbon

      and

      3,8 % or more but not more than 4,3 % of nickel

      and

      1,1 % or more but not more than 1,5 % of chromium

      and

      0,15 % or more but not more than 0,5 % of molybdenum,

    • 0,3 % or more but not more than 0,5 % of carbon

      and

      1,4 % or more but not more than 2,1 % of chromium

      and

      0,15 % or more but not more than 0,5 % of molybdenum

      and

      less than 1,2 % of nickel,

    • 0,3 % or more of carbon

      and

      less than 5,2 % of chromium

      and

      0,65 % or more of molybdenum or 0,4 % or more of tungsten,

    • 0,5 % or more but not more than 0,6 % of carbon

      and

      1,25 % or more but not more than 1,8 % of nickel

      and

      0,5 % or more but not more than 1,2 % of chromium

      and

      0,15 % or more but not more than 0,5 % of molybdenum.

Chapter notes: Chapter 72 →

In the Mexican Tariff (TIGIE), 7224.90.99.02 is one of 4 lines under subheading 7224.90, other alloy steel in ingots or other primary forms: other.

The import duty (IGI) is free, and quantities are declared in Kg.

For the same subheading, the UK duty is free, the EU duty is free, the Türkiye duty is 0%–14%, the US duty is free, the Canada duty is free, the Brazil duty is 7.2%, the Argentina duty is 7.2%, the Peru duty is free, the New Zealand duty is free, the Japan duty is free, the Taiwan duty is free, the GCC duty is 5%, the Switzerland duty is free, the Norway duty is free, the North Macedonia duty is free and the Nigeria duty is 5%.

Mexico imported goods of subheading 7224.90 worth US$25m in 2024; the largest supplier was the United States.

Questions and answers

What is the Mexico import duty for tariff fraction 7224.90.99.02?

The import duty (IGI) in the Mexican Tariff (TIGIE) is free; the supplementary unit is Kg. This page shows the rate as published by the national source and, where the source publishes them, preferential rates: choose the country of origin to see them. Trade defence duties and VAT are not covered.

Where does Mexico import these goods from?

For subheading 7224.90 as a whole, the largest supplier in 2024 was the United States (US$12m), followed by Brazil.

Download as CSV Follow changes (RSS)