Tarif douanier du Royaume-Uni · code marchandise · HS 8708.94
8708 94 35 00 : Volants et directions : Steering wheels, steering columns and steering boxes
Volants et directions
✓ Utilisable dans une déclaration en douane Données : Tarif douanier du Royaume-Uni · vérifiées le 24 octobre 2026
Cette ligne n’a pas de texte officiel en français ; elle est affichée dans la langue de son tarif.
- 8708 Parts and accessories of the motor vehicles of headings 8701 to 8705
- Other parts and accessories
- 8708 94 00 00 Steering wheels, steering columns and steering boxes ; parts thereof
- Other
- 8708 94 35 00 Steering wheels, steering columns and steering boxes
Ce que vous payez
Importation : Royaume-Uni
Droits additionnels et règles à l’importation
Charges qui s’ajoutent au droit de douane et conditions que les marchandises doivent remplir à la frontière.
Droits additionnels et redevances 2
- Droit additionnelDroits supplémentaires 35 %
- S’applique aux marchandises originaires de
- Biélorussie, Russie
- Acte juridique
- 2022 No. 598
- Documents
- 9014
- Suspension tarifaireSuspension tarifaire autonome Exemption
- S’applique aux marchandises originaires de
- tous les pays
- En vigueur
- jusqu’au 31 décembre 2028
- Acte juridique
- 2020 No. 1435
Conditions à l’importation 5
- Interdiction ou restrictionProhibition à l'importation
- S’applique aux marchandises originaires de
- Corée du Nord
- Acte juridique
- S.I. 2019/411
- Contrôle à l’importationRestriction de mise en libre pratique
- S’applique aux marchandises originaires de
- Biélorussie, Irak, Russie, Syrie, Ukraine
- Acte juridique
- 2022 No. 748, S.I. 2020/707, S.I. 2019/792, S.I. 2022/395
- Documents
- 9024
- 9032
- 9025
- 9009
- 9010
- 9017
- Contrôle à l’importationRestriction de mise en libre pratique
- S’applique aux marchandises originaires de
- tous les pays
- Acte juridique
- S.I. 2019/583
- Documents
- L100 Licence d'importation "substances réglementées" (ozone), délivrée par la Commission
- Y902
- 9Y06
- Contrôle à l’importationContrôle à l'importation de biens et technologies soumis à restrictions
- S’applique aux marchandises originaires de
- Iran, Libye, Russie
- Acte juridique
- S.I. 2019/461, 2020 No. 1665, S.I. 2019/855
- Contrôle à l’importationContrôle à l'importation sur les articles de luxe
- S’applique aux marchandises originaires de
- Corée du Nord
- Acte juridique
- S.I. 2019/411
- Documents
- Y945 Effets personnels des voyageurs ou biens sans caractère commercial à usage personnel des voyageurs contenus dans leurs bagages (Article 10.2 du règlement (UE) 2017/1509)
- Y946 Biens nécessaires aux fins officielles de missions diplomatiques ou consulaires des États membres en RPDC ou d'organisations internationales jouissant d'immunités conformément au droit international, ou effets personnels de leur personnel (Article 10.3 du règlement (UE) 2017/1509)
- Y948 Biens autres que ceux désignés à l’annexe VIII (articles de luxe) du règlement (UE) 2017/1509
Taux préférentiels par pays
| Accord ou régime | Pays | Taux |
|---|---|---|
| droit des pays tiers (hors accord) | — | 4 % |
| DCTS Comprehensive | Afghanistan, Angola, Bangladesh, Bénin et 38 autresAfghanistan, Angola, Bangladesh, Bénin, Bhoutan, Burkina Faso, Burundi, Cambodge, Comores, Congo-Kinshasa, Djibouti, Érythrée, Éthiopie, Gambie, Guinée, Guinée-Bissau, Haïti, Kiribati, Laos, Liberia, Malawi, Mali, Mauritanie, Myanmar (Birmanie), Népal, Niger, Ouganda, République centrafricaine, Rwanda, Sao Tomé-et-Principe, Sénégal, Sierra Leone, Somalie, Soudan, Soudan du Sud, Tanzanie, Tchad, Timor oriental, Togo, Tuvalu, Yémen, Zambie | Exemption |
| Union européenne (y compris code "EU") | Allemagne, Autriche, Belgique, Bulgarie et 23 autresAllemagne, Autriche, Belgique, Bulgarie, Chypre, Croatie, Danemark, Espagne, Estonie, Finlande, France, Grèce, Hongrie, Irlande, Italie, Lettonie, Lituanie, Luxembourg, Malte, Pays-Bas, Pologne, Portugal, Roumanie, Slovaquie, Slovénie, Suède, Tchéquie | Exemption |
| DCTS Enhanced | Algérie, Bolivie, Cap-Vert, Congo-Brazzaville et 13 autresAlgérie, Bolivie, Cap-Vert, Congo-Brazzaville, Îles Cook, Kirghizstan, Micronésie, Mongolie, Nigeria, Niue, Ouzbékistan, Pakistan, Philippines, Sri Lanka, Syrie, Tadjikistan, Vanuatu | Exemption |
| CARIFORUM | Antigua-et-Barbuda, Bahamas, Barbade, Belize et 10 autresAntigua-et-Barbuda, Bahamas, Barbade, Belize, Dominique, Grenade, Guyana, Jamaïque, République dominicaine, Saint-Christophe-et-Niévès, Saint-Vincent-et-les Grenadines, Sainte-Lucie, Suriname, Trinité-et-Tobago | Exemption |
| PTOM (Pays et territoires d'outre-mer) | Anguilla, Bermudes, Géorgie du Sud-et-les Îles Sandwich du Sud, Îles Caïmans et 7 autresAnguilla, Bermudes, Géorgie du Sud-et-les Îles Sandwich du Sud, Îles Caïmans, Îles Malouines, Îles Pitcairn, Îles Turques-et-Caïques, Îles Vierges britanniques, Montserrat, Sainte-Hélène, Territoire britannique de l’océan Indien | Exemption |
| Amérique centrale | Costa Rica, Guatemala, Honduras, Nicaragua, Panama, Salvador | Exemption |
| SADC EPA | Botswana, Eswatini, Lesotho, Mozambique, Namibie | Exemption |
| États d’Afrique orientale et australe | Madagascar, Maurice, Seychelles, Zimbabwe | Exemption |
| CPTPP | Brunei, Malaisie | Exemption |
| accord Royaume-Uni–Andorre | Andorre | Exemption |
| accord Royaume-Uni–Albanie | Albanie | Exemption |
| accord Royaume-Uni–Australie | Australie | Exemption |
| accord Royaume-Uni–Canada | Canada | Exemption |
| accord Royaume-Uni–Suisse | Suisse | Exemption |
| accord Royaume-Uni–Côte d’Ivoire | Côte d’Ivoire | Exemption |
| accord Royaume-Uni–Chili | Chili | Exemption |
| accord Royaume-Uni–Cameroun | Cameroun | Exemption |
| accord Royaume-Uni–Colombie | Colombie | Exemption |
| accord Royaume-Uni–Ceuta et Melilla | Ceuta et Melilla | Exemption |
| accord Royaume-Uni–Équateur | Équateur | Exemption |
| accord Royaume-Uni–Égypte | Égypte | Exemption |
| accord Royaume-Uni–Fidji | Fidji | Exemption |
| accord Royaume-Uni–Îles Féroé | Îles Féroé | Exemption |
| accord Royaume-Uni–Géorgie | Géorgie | Exemption |
| accord Royaume-Uni–Ghana | Ghana | Exemption |
| DCTS Standard | Indonésie | Exemption |
| accord Royaume-Uni–Israël | Israël | Exemption |
| accord Royaume-Uni–Inde | Inde | Exemption |
| accord Royaume-Uni–Islande | Islande | Exemption |
| accord Royaume-Uni–Jordanie | Jordanie | Exemption |
| accord Royaume-Uni–Japon | Japon | Exemption |
| accord Royaume-Uni–Kenya | Kenya | Exemption |
| accord Royaume-Uni–Corée du Sud | Corée du Sud | Exemption |
| accord Royaume-Uni–Liban | Liban | Exemption |
| accord Royaume-Uni–Liechtenstein | Liechtenstein | Exemption |
| accord Royaume-Uni–Maroc | Maroc | Exemption |
| accord Royaume-Uni–Moldavie | Moldavie | Exemption |
| accord Royaume-Uni–Macédoine du Nord | Macédoine du Nord | Exemption |
| accord Royaume-Uni–Mexique | Mexique | Exemption |
| accord Royaume-Uni–Norvège | Norvège | Exemption |
| accord Royaume-Uni–Nouvelle-Zélande | Nouvelle-Zélande | Exemption |
| accord Royaume-Uni–Pérou | Pérou | Exemption |
| accord Royaume-Uni–Papouasie-Nouvelle-Guinée | Papouasie-Nouvelle-Guinée | Exemption |
| accord Royaume-Uni–Territoires palestiniens | Territoires palestiniens | Exemption |
| accord Royaume-Uni–Serbie | Serbie | Exemption |
| accord Royaume-Uni–Îles Salomon | Îles Salomon | Exemption |
| accord Royaume-Uni–Singapour | Singapour | Exemption |
| accord Royaume-Uni–Saint-Marin | Saint-Marin | Exemption |
| accord Royaume-Uni–Tunisie | Tunisie | Exemption |
| accord Royaume-Uni–Turquie | Turquie | Exemption |
| accord Royaume-Uni–Ukraine | Ukraine | Exemption |
| accord Royaume-Uni–Viêt Nam | Viêt Nam | Exemption |
| accord Royaume-Uni–Samoa | Samoa | Exemption |
| accord Royaume-Uni–Kosovo | Kosovo | Exemption |
| accord Royaume-Uni–Afrique du Sud | Afrique du Sud | Exemption |
Notes de bas de page
TN200 The export of these items may be controlled under the Export Control Order 2008 as amended…
TN207 The Democratic People’s Republic of Korea (Sanctions) (EU Exit) Regulations 2019 impose tr…
TN701 According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9), as retained in UK La…
The prohibition shall not apply in respect of :
(a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established.
(b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014, as retained in UK Law, or in accordance with the EU-Ukraine Association Agreement
Royaume-Uni : importations mensuelles · HS 8708.94
Principaux fournisseurs, 12 derniers mois
| Pays | Valeur | Part | Variation |
|---|---|---|---|
| 63,1 M £GB | 16,4 % | -7,4 % | |
| 59,3 M £GB | 15,4 % | -14,9 % | |
| 54,5 M £GB | 14,1 % | -15,2 % | |
| 49,4 M £GB | 12,8 % | +0,4 % | |
| 25,2 M £GB | 6,5 % | -25,5 % | |
| 22,7 M £GB | 5,9 % | -24,1 % | |
| 21,3 M £GB | 5,5 % | -9,5 % | |
| 19,2 M £GB | 5 % | +20,7 % |
Même sous-position dans les autres tarifs
8708.94 Volants, colonnes et boîtiers de direction ; leurs parties
Lignes tarifaires (Royaume-Uni) : 8708.94
- 8708 94 20 00For the industrial assembly of : vehicles of heading 8703 ; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3 ; vehicles of heading 8705
- 8708 94 35 00Steering wheels, steering columns and steering boxes
- 8708 94 91 00Of closed-die forged steel
- 8708 94 99 10Hub gear made of cold rolled carbon steel (per astm a1008), molded into the plastic and pressed on pinion, with : -an outer diameter of 81.2 mm or more, but not more than 82.55 mm, -an inner diameter of 25.9 mm or more, but not more than 25.97 mm, -a height of the lower side of inner diameter of 11.63 mm or more, but not more than 12.13 mm, -a height of the upper side of inner diameter of 3.25 mm or more, but not more than 3.5 mm, -an overall height of 11.63 mm or more, but not more than 19.5 mm for use in the manufacture of vehicle's steering system
- 8708 94 99 20Intermediate steering shaft forming part of the steering column with : -a torsional rigidity of 25 nm/degree or more, -a tubular male shaft in welded carbon steel tube (per gb/t 699 grade 20), -a tubular female shaft in welded carbon steel tube (per with gb/t 699 grade 20), -two spiders universal joint made of chromium alloy steel (per gb/t 5216 grade 20crmntih), -a length in nominal telescope position of 396 mm or more but not more than 467 mm, -a coupling interface on both ends with internal toothing, -two cardan joints on both sides, -a telescope shaft function with a range of 74 mm or more but not more than 115 mm, for use in the manufacture of vehicle's steering system
- 8708 94 99 30Lower assist shaft as part of the steering column made of carbon steel (per gb/t699 grade 45 or jis g4051 grade s45c) with : -an ultimate torsional strength load of 325 nm or more and johnson apparent elastic limit (j.a.e.l) values of 275 nm or more, -a length of 66.39 mm or more but not more than 88.64 mm, -an outer diameter of 27.47 mm or more but not more than 28.38 mm, -an inner hole of diameter 6.50 mm or more but not more than 6.58 mm, -an external 26-teeth spline with major diameter 21.18 mm or more but not more than 21.44 mm, -a knurling on a part of outer surface of major diameter 26.0 mm or more but not more than 26.1 mm, -with or without an external 24-tooth spline and with a major diameter 24.75 mm or more but not more than 25 mm, for use in the manufacture of vehicle's steering system
- 8708 94 99 40Upper assist shaft as part of the steering column made of carbon steel (per gb/t699 grade 45) with : -an ultimate torsional strength load of 325 nm or more and johnson apparent elastic limit (j.a.e.l) values of 275 nm or more, -a length of 165.3 mm or more but not more than 204.2 mm, -an outer diameter of 22.87 mm or more but not more than 22.92 mm, -an internal hole of diameter 6.50 or more but not more than 6.58 mm, -an external spline, for use in the manufacture of vehicle's steering system
- 8708 94 99 50Lower shaft as part of the steering column made of aluminium alloy (per astm b221m grade 6105), air quenched and tempered with : -an ultimate torsional strength of 260 nm or more, -a length of 296.7 mm or more but not more than 297.8 mm, -an external 18-tooth spline on all shaft length with major diameter of 28.7 mm or more but not more than 29 mm, -an 18-tooth internal spline with a minor diameter of 19.7 mm or more but not more than 20 mm, for use in the manufacture of vehicle's steering system
- 8708 94 99 60Torsion bar as part of the steering column made of carbon alloy steel (per sae j1268, grade 5160h of modified chemistry for carbon content of 0.53 or more, but not more than 0.56) with : -a shaft torsional stiffness of 2.5 nm/degree or more but not more than 2.7 nm/degree, -a length of 107.75 mm or more but not more than 108.25 mm, -an outer diameter of 6.38 mm or more but not more than 6.42 mm, -two external 18-tooth splines on both shaft ends with a major diameter of 6.70 mm or more but not more than 6.85 mm, as interface to pressing with matting input and output shafts, -entire surface shot peened, for use in the manufacture of vehicle's steering system
- 8708 94 99 70Tubular steering shaft as part of the steering column made of carbon steel welded tube (per en 10305/2, e235 c or gb/t699 grade 20) with : -an ultimate torsional strength of 300 nm or more and johnson apparent elastic limit (j.a.e.l) values of 275 nm or more, -a length of 245.48 mm or more but not more than 287.5 mm, -an outer diameter of 23.95 mm or more but not more than 32.25 mm, -an interface for steering wheel connection either in a form of an external 40-tooth spline with major diameter of 17.1 mm or more but not more than 17.5 mm and an internal thread m12x1.75-6h or in a form of an external hexagon with a short diagonal of 15.05 mm or more but not more than 15.35mm and an internal thread m10x1.5-6h, -an interface either in a form of an internal 10-tooth spline of length of 98.0 mm or more but not more than 160 mm, with minor diameter of 16.1 mm or more but not more than 16.4 mm or in a form of an internal 48-tooth spline of length of 151 mm or more but not more than 160 mm, with minor diameter of 23.2 mm or more but not more than 23.3 mm, for use in the manufacture of vehicle's steering system
- 8708 94 99 80Blank assembly worm gear, consisting of a hub of carbon steel (gb/t 699 grade 25 or din en 10277 grade 11smn30) and a ring of cast polyamide 6/12 with : - an outer diameter of 97.35 mm or more, but not more than 102.65 mm, - an inner diameter of 27.91 mm or more, but not more than 27.93 mm, - a height of the hub of 11.75 mm or more, but not more than 12.00 mm, - an overall height of 16.00 mm or more, but not more than 18.00 mm
- 8708 94 99 90Steering wheels, steering columns and steering boxes : other, parts, other
Renseignements tarifaires contraignants pour des marchandises similaires
Décisions de la douane américaine (CBP, CROSS) et de l’administration britannique HMRC (Advance Tariff Rulings) sur des marchandises classées ici. Une décision ne lie que son titulaire, mais montre comment les autorités classent des marchandises similaires. Les descriptions sont les textes anglais des autorités.
- N360321 U.S. CBP
The tariff classification and country of origin of a tie rod assembly
- N352712 U.S. CBP
The tariff classification and country of origin of ball joints and pitman arms
- N352155 U.S. CBP
The tariff classification and country of origin of inner and outer tie rods
- N349262 U.S. CBP
The tariff classification of steering coupler from South Korea
13 décisions au total pour ce code
Notes légales
Note de sous-positions
1. Le no 870822 couvre:
a) les pare-brises, vitres arrières et autres glaces, encadrés;
b) les pare-brises, vitres arrières et autres glaces, même encadrés, incorporant des dispositifs chauffants ou autres dispositifs électriques ou électroniques,
pour autant qu’ils soient destinés exclusivement ou principalement aux véhicules automobiles des nos 8701 à 8705.
Le code marchandise 8708 94 35 00 est une ligne du tarif douanier du Royaume-Uni qui relève de la sous-position SH 8708.94 (volants, colonnes et boîtiers de direction ; leurs parties).
Le droit des pays tiers est de 4 %.
174 pays ne paient aucun droit de douane au Royaume-Uni grâce aux accords commerciaux et aux régimes préférentiels comme DCTS Comprehensive et Union européenne, contre un droit des pays tiers de 4 %.
Au Royaume-Uni, un droit additionnel de 35 % s’ajoute au droit de douane pour les marchandises originaires de Biélorussie et de Russie.
Sur les 12 mois allant jusqu’en août 2026, les importations de marchandises de la sous-position 8708.94 au Royaume-Uni ont atteint 385,6 M £GB (−11 % par rapport aux 12 mois précédents) ; la France en a fourni 16 %, devant la Hongrie.
Pour la même sous-position, le droit des pays tiers dans l’UE va de 3 % à 4,5 %, le taux légal (loi n° 474) en Turquie va de 3 % à 4,5 %, le droit général aux États-Unis va de 0 % à 2,5 %, le tarif de la nation la plus favorisée (TNPF) au Canada va de 0 % à 6 %, le droit d’importation (IGI) au Mexique est nul, le taux du TEC au Brésil va de 12,6 % à 18 %, le droit extrazone (AEC) en Argentine va de 12,6 % à 18 %, le droit ad valorem au Pérou est nul, le tarif normal (Normal Tariff) en Nouvelle-Zélande va de 0 % à 5 %, le taux appliqué au Japon est nul, le taux de la colonne 1 à Taïwan va de 4 % à 7,5 %, le droit de douane dans les pays du CCG est de 5 %, le droit du tarif normal en Suisse est nul, le droit ordinaire en Norvège est nul, le droit NPF en Macédoine du Nord va de 0 % à 4,5 % et le droit d’importation au Nigeria est de 10 %.
Le Royaume-Uni a importé des marchandises de la sous-position 8708.94 pour 607 M $US en 2024 ; le premier fournisseur a été l’Allemagne, la France occupant le 2e rang avec 93 M $US.
Questions fréquentes
Quel est le droit de douane pour le code marchandise 8708 94 35 00 ?
Le droit des pays tiers dans le tarif douanier du Royaume-Uni est de 4 %. Les taux préférentiels accordés aux pays partenaires, les droits antidumping et la TVA ne sont pas compris.
Quels pays bénéficient d’un taux réduit pour le code marchandise 8708 94 35 00 ?
174 pays bénéficient d’un taux préférentiel sur cette ligne, dont 174 à 0 %, notamment au titre de DCTS Comprehensive, d’Union européenne et de DCTS Enhanced. Ce taux ne s’applique qu’aux marchandises qui respectent les règles d’origine de l’accord, sur présentation d’une preuve de l’origine. Choisissez le pays d’origine sur cette page pour voir son taux.
Des droits antidumping ou d’autres droits additionnels s’appliquent-ils au code marchandise 8708 94 35 00 ?
Droit additionnel de 35 % sur les marchandises originaires de Biélorussie et de Russie. Ces droits s’ajoutent au droit de douane.
D’où le Royaume-Uni importe-t-il ces marchandises ?
Pour l’ensemble de la sous-position 8708.94, le premier fournisseur en 2024 a été l’Allemagne (117 M $US), devant la France.
Quelle place occupe la France parmi les fournisseurs ?
Pour la sous-position 8708.94, la France a occupé en 2024 le 2e rang des fournisseurs du Royaume-Uni, avec 93 M $US.